Download or read book Trajectory Bundle Estimation For Perception driven Planning written by Abraham Galton Bachrach and published by . This book was released on 2013 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: When operating in unknown environments, autonomous vehicles must perceive and understand the environment ahead in order to make effective navigation decisions. Long range perception can enable a vehicle to choose actions that take it directly toward its goal, avoiding dead ends. In addition, the perception range is critically important for ensuring the safety of vehicles with constrained dynamics. In general, the faster a vehicle moves, the more constrained its dynamics become due to acceleration limits imposed by its actuators. This means that the speed at which an autonomous agent can safely travel is often governed by its ability to perceive and understand the environment ahead. Overall, perception range is one of the most important factors that determines the performance of an autonomous vehicle. Today, autonomous vehicles tend to rely exclusively on metric representations built using range sensors to plan paths. However, such sensors are limited by their maximum range, field of view, and occluding obstacles in the foreground. Together, these limitations make up what we call the metric sensing horizon of the vehicle. The first two limitations are generally determined by the weight, size, power, and cost budget allocated to sensing. However, range sensors will always be limited by occlusions. If we wish to develop autonomous vehicles that are able to navigate directly toward a goal at high speeds through unknown environments, then we must move beyond the simple range-sensor based techniques. We must develop algorithms that enable autonomous agents to harness knowledge about the structure of the world to interpret additional sensor information (such as appearance information provided by cameras), and make inferences about parts of the world that cannot be directly observed. We develop a new representation based around trajectory bundles, that makes this challenging task more tractable. Rather than attempt to explicitly model the geometry of the world in front of the vehicle (which can be incredibly complex), we reason about the world in terms of what the vehicle can and cannot do. Trajectory bundles are designed to capture an abstract concept such as the command "go straight and then turn towards the right" in a concrete and actionable manner. We employ a library of trajectory bundles to reason about the layout of obstacles in the environment based on which bundles in the library are predicted to be feasible. Trajectory bundles provide a lens through which we can look at perception tasks, allowing us to leverage machine learning tools in much more effective ways for navigation. In this thesis we introduce trajectory bundles, and develop algorithms that use them to enable perception-driven planning. We develop a trajectory clustering algorithm that enables us to construct a set of trajectory bundles. We then develop a Bayesian filtering framework that enables us to estimate a belief over which trajectory bundles are feasible based on the history of actions and observations of the vehicle. We test our algorithms by using them to navigate a simulated fixed wing air vehicle at high speeds through an unknown environment using a monocular camera sensor.

Download or read book Autonomous driving algorithms and Its IC Design written by Jianfeng Ren and published by Springer Nature. This book was released on 2023-08-09 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the rapid development of artificial intelligence and the emergence of various new sensors, autonomous driving has grown in popularity in recent years. The implementation of autonomous driving requires new sources of sensory data, such as cameras, radars, and lidars, and the algorithm processing requires a high degree of parallel computing. In this regard, traditional CPUs have insufficient computing power, while DSPs are good at image processing but lack sufficient performance for deep learning. Although GPUs are good at training, they are too “power-hungry,” which can affect vehicle performance. Therefore, this book looks to the future, arguing that custom ASICs are bound to become mainstream. With the goal of ICs design for autonomous driving, this book discusses the theory and engineering practice of designing future-oriented autonomous driving SoC chips. The content is divided into thirteen chapters, the first chapter mainly introduces readers to the current challenges and research directions in autonomous driving. Chapters 2–6 focus on algorithm design for perception and planning control. Chapters 7–10 address the optimization of deep learning models and the design of deep learning chips, while Chapters 11-12 cover automatic driving software architecture design. Chapter 13 discusses the 5G application on autonomous drving. This book is suitable for all undergraduates, graduate students, and engineering technicians who are interested in autonomous driving.

Download or read book Design and Advanced Robust Chassis Dynamics Control for X by Wire Unmanned Ground Vehicle written by Jun NI and published by Springer Nature. This book was released on 2022-05-31 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-by-wire Unmanned Ground Vehicles (UGVs) have been attracting increased attention for various civilian or military applications. The x-by-wire techniques (drive-by-wire, steer-by-wire, and brake-by-wire techniques) provide the possibility of achieving novel vehicle design and advanced dynamics control, which can significantly improve the overall performance, maneuverability, and mobility of the UGVs. However, there are few full x-by-wire UGVs prototype models reported in the world. Therefore, there is no book that can fully describe the design, configuration, and dynamics control approach of full x-by-wire UGVs, which makes it difficult for readers to study this hot and interesting topic. In this book, we use a full x-by-wire UGV, developed by our group, as the example. This UGV is completely x-by-wire with four in-wheel motors driven and a four-wheel independent steer steer. In this book, the overall design of the UGV, the design of the key subsystems (battery pack system, in-wheel motor-driven system, independent steer system, remote and autonomous control system), and the dynamics control approach will be introduced in detail, and the experiment's results will be provided to validate the proposed dynamics control approach.

Download or read book Introduction to Self Driving Vehicle Technology written by Hanky Sjafrie and published by CRC Press. This book was released on 2019-11-21 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to teach the core concepts that make Self-driving vehicles (SDVs) possible. It is aimed at people who want to get their teeth into self-driving vehicle technology, by providing genuine technical insights where other books just skim the surface. The book tackles everything from sensors and perception to functional safety and cybersecurity. It also passes on some practical know-how and discusses concrete SDV applications, along with a discussion of where this technology is heading. It will serve as a good starting point for software developers or professional engineers who are eager to pursue a career in this exciting field and want to learn more about the basics of SDV algorithms. Likewise, academic researchers, technology enthusiasts, and journalists will also find the book useful. Key Features: Offers a comprehensive technological walk-through of what really matters in SDV development: from hardware, software, to functional safety and cybersecurity Written by an active practitioner with extensive experience in series development and research in the fields of Advanced Driver Assistance Systems (ADAS) and Autonomous Driving Covers theoretical fundamentals of state-of-the-art SLAM, multi-sensor data fusion, and other SDV algorithms. Includes practical information and hands-on material with Robot Operating System (ROS) and Open Source Car Control (OSCC). Provides an overview of the strategies, trends, and applications which companies are pursuing in this field at present as well as other technical insights from the industry.

Download or read book Creating Autonomous Vehicle Systems written by Shaoshan Liu and published by Morgan & Claypool Publishers. This book was released on 2017-10-25 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first technical overview of autonomous vehicles written for a general computing and engineering audience. The authors share their practical experiences of creating autonomous vehicle systems. These systems are complex, consisting of three major subsystems: (1) algorithms for localization, perception, and planning and control; (2) client systems, such as the robotics operating system and hardware platform; and (3) the cloud platform, which includes data storage, simulation, high-definition (HD) mapping, and deep learning model training. The algorithm subsystem extracts meaningful information from sensor raw data to understand its environment and make decisions about its actions. The client subsystem integrates these algorithms to meet real-time and reliability requirements. The cloud platform provides offline computing and storage capabilities for autonomous vehicles. Using the cloud platform, we are able to test new algorithms and update the HD map—plus, train better recognition, tracking, and decision models. This book consists of nine chapters. Chapter 1 provides an overview of autonomous vehicle systems; Chapter 2 focuses on localization technologies; Chapter 3 discusses traditional techniques used for perception; Chapter 4 discusses deep learning based techniques for perception; Chapter 5 introduces the planning and control sub-system, especially prediction and routing technologies; Chapter 6 focuses on motion planning and feedback control of the planning and control subsystem; Chapter 7 introduces reinforcement learning-based planning and control; Chapter 8 delves into the details of client systems design; and Chapter 9 provides the details of cloud platforms for autonomous driving. This book should be useful to students, researchers, and practitioners alike. Whether you are an undergraduate or a graduate student interested in autonomous driving, you will find herein a comprehensive overview of the whole autonomous vehicle technology stack. If you are an autonomous driving practitioner, the many practical techniques introduced in this book will be of interest to you. Researchers will also find plenty of references for an effective, deeper exploration of the various technologies.

Download or read book Factor Graphs for Robot Perception written by Frank Dellaert and published by . This book was released on 2017-08-15 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the use of factor graphs for the modeling and solving of large-scale inference problems in robotics. Factor graphs are introduced as an economical representation within which to formulate the different inference problems, setting the stage for the subsequent sections on practical methods to solve them.

Download or read book Robotics Research written by Masayuki Inaba and published by Springer. This book was released on 2016-04-22 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of papers presented at the 16th International Symposium of Robotic Research (ISRR). ISRR is the biennial meeting of the International Foundation of Robotic Research (IFRR) and its 16th edition took place in Singapore over the period 16th to 19th December 2013. The ISRR is the longest running series of robotics research meetings and dates back to the very earliest days of robotics as a research discipline. This 16th ISRR meeting was held in the 30th anniversary year of the very first meeting which took place in Bretton Woods (New Hampshire, USA) in August 1983., and represents thirty years at the forefront of ideas in robotics research. As for the previous symposia, ISRR 2013 followed up on the successful concept of a mixture of invited contributions and open submissions. 16 of the contributions were invited contributions from outstanding researchers selected by the IFRR officers and the program committee, and the other contributions were chosen among the open submissions after peer review. This selection process resulted in a truly excellent technical program which featured some of the very best of robotic research. These papers were presented in a single-track interactive format which enables real conversations between speakers and the audience. The symposium contributions contained in this volume report on a variety of new robotics research results covering a broad spectrum organized into traditional ISRR categories: control; design; intelligence and learning; manipulation; perception; and planning.

Download or read book Global Perspectives on the Ecology of Human Machine Systems written by John M. Flach and published by CRC Press. This book was released on 2018-04-20 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a growing consensus in the human factors/ergonomics community that human factors research has had little impact on significant applied problems. Some have suggested that the problem lies in the fact that much HF/E research has been based on the wrong type of psychology, an information processing view of psychology that is reductionistic and context-free. Ecological psychology offers a viable alternative, presenting a richer view of human behavior that is holistic and contextualized. The papers presented in these two volumes show the conceptual impact that ecological psychology can have on HF/E, as well as presenting a number of specific examples illustrating the ecological approach to human-machine systems. It is the first collection of papers that explicitly draws a connection between these two fields. While work in this area is only just beginning, the evidence available suggests that taking an ecological approach to human factors/ergonomics helps bridge the existing gap between basic research and applied problems.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Discrete Choice Methods with Simulation written by Kenneth Train and published by Cambridge University Press. This book was released on 2009-07-06 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the new generation of discrete choice methods, focusing on the many advances that are made possible by simulation. Researchers use these statistical methods to examine the choices that consumers, households, firms, and other agents make. Each of the major models is covered: logit, generalized extreme value, or GEV (including nested and cross-nested logits), probit, and mixed logit, plus a variety of specifications that build on these basics. Simulation-assisted estimation procedures are investigated and compared, including maximum stimulated likelihood, method of simulated moments, and method of simulated scores. Procedures for drawing from densities are described, including variance reduction techniques such as anithetics and Halton draws. Recent advances in Bayesian procedures are explored, including the use of the Metropolis-Hastings algorithm and its variant Gibbs sampling. The second edition adds chapters on endogeneity and expectation-maximization (EM) algorithms. No other book incorporates all these fields, which have arisen in the past 25 years. The procedures are applicable in many fields, including energy, transportation, environmental studies, health, labor, and marketing.

Download or read book The DARPA Urban Challenge written by Martin Buehler and published by Springer. This book was released on 2009-11-26 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the dawn of the new millennium, robotics has undergone a major transformation in scope and dimensions. This expansion has been brought about by the maturity of the field and the advances in its related technologies. From a largely dominant industrial focus, robotics has been rapidly expanding into the challenges of the human world. The new generation of robots is expected to safely and dependably co-habitat with humans in homes, workplaces, and communities, providing support in services, entertainment, education, healthcare, manufacturing, and assistance. Beyond its impact on physical robots, the body of knowledge robotics has produced is revealing a much wider range of applications reaching across diverse research areas and scientific disciplines, such as: biomechanics, haptics, neurosciences, virtual simulation, animation, surgery, and sensor networks among others. In return, the challenges of the new emerging areas are proving an abundant source of stimulation and insights for the field of robotics. It is indeed at the intersection of disciplines that the most striking advances happen. The goal of the series of Springer Tracts in Advanced Robotics (STAR) is to bring, in a timely fashion, the latest advances and developments in robotics on the basis of their significance and quality. It is our hope that the wider dissemination of research developments will stimulate more exchanges and collaborations among the research community and contribute to further advancement of this rapidly growing field.

Download or read book The Psychology of Cognition written by Durk Talsma and published by Taylor & Francis. This book was released on 2023-07-18 with total page 1691 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, cutting-edge textbook offers a layered approach to the study of cognitive neuroscience and psychology. It embraces multiple exciting and influential theoretical approaches such as embodied cognition and predictive coding, and explaining new topics such as motor cognition, cognitive control, consciousness, and social cognition. Durk Talsma offers foundational knowledge which he expands and enhances with coverage of complex topics, explaining their interrelatedness and presenting them together with classic experiments and approaches in a historic context. Providing broad coverage of world-class international research this richly illustrated textbook covers key topics including: Action control and cognitive control Consciousness and attention Perception Multisensory processing and perception-action integration Motivation and reward processing Emotion and cognition Learning and memory Language processing Reasoning Numerical cognition and categorisation Judgement, decision making, and problem solving Social cognition Applied cognitive psychology With pedagogical features that include highlights of relevant methods and historical notes to spark student interest, this essential text will be invaluable reading for all students of cognitive psychology and cognitive neuroscience.

Download or read book Presentation Zen written by Garr Reynolds and published by Pearson Education. This book was released on 2009-04-15 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: FOREWORD BY GUY KAWASAKI Presentation designer and internationally acclaimed communications expert Garr Reynolds, creator of the most popular Web site on presentation design and delivery on the Net — presentationzen.com — shares his experience in a provocative mix of illumination, inspiration, education, and guidance that will change the way you think about making presentations with PowerPoint or Keynote. Presentation Zen challenges the conventional wisdom of making "slide presentations" in today’s world and encourages you to think differently and more creatively about the preparation, design, and delivery of your presentations. Garr shares lessons and perspectives that draw upon practical advice from the fields of communication and business. Combining solid principles of design with the tenets of Zen simplicity, this book will help you along the path to simpler, more effective presentations.

Download or read book Introduction to Autonomous Mobile Robots second edition written by Roland Siegwart and published by MIT Press. This book was released on 2011-02-18 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a comprehensive introduction to all aspects of mobile robotics, from algorithms to mechanisms. Mobile robots range from the Mars Pathfinder mission's teleoperated Sojourner to the cleaning robots in the Paris Metro. This text offers students and other interested readers an introduction to the fundamentals of mobile robotics, spanning the mechanical, motor, sensory, perceptual, and cognitive layers the field comprises. The text focuses on mobility itself, offering an overview of the mechanisms that allow a mobile robot to move through a real world environment to perform its tasks, including locomotion, sensing, localization, and motion planning. It synthesizes material from such fields as kinematics, control theory, signal analysis, computer vision, information theory, artificial intelligence, and probability theory. The book presents the techniques and technology that enable mobility in a series of interacting modules. Each chapter treats a different aspect of mobility, as the book moves from low-level to high-level details. It covers all aspects of mobile robotics, including software and hardware design considerations, related technologies, and algorithmic techniques. This second edition has been revised and updated throughout, with 130 pages of new material on such topics as locomotion, perception, localization, and planning and navigation. Problem sets have been added at the end of each chapter. Bringing together all aspects of mobile robotics into one volume, Introduction to Autonomous Mobile Robots can serve as a textbook or a working tool for beginning practitioners. Curriculum developed by Dr. Robert King, Colorado School of Mines, and Dr. James Conrad, University of North Carolina-Charlotte, to accompany the National Instruments LabVIEW Robotics Starter Kit, are available. Included are 13 (6 by Dr. King and 7 by Dr. Conrad) laboratory exercises for using the LabVIEW Robotics Starter Kit to teach mobile robotics concepts.

Download or read book Phenomenology of Perception written by Maurice Merleau-Ponty and published by Motilal Banarsidass Publishe. This book was released on 1996 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buddhist philosophy of Anicca (impermanence), Dukkha (suffering), and

Download or read book State Estimation for Robotics written by Timothy D. Barfoot and published by Cambridge University Press. This book was released on 2017-07-31 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern look at state estimation, targeted at students and practitioners of robotics, with emphasis on three-dimensional applications.

Download or read book Pain Management and the Opioid Epidemic written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-09-28 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drug overdose, driven largely by overdose related to the use of opioids, is now the leading cause of unintentional injury death in the United States. The ongoing opioid crisis lies at the intersection of two public health challenges: reducing the burden of suffering from pain and containing the rising toll of the harms that can arise from the use of opioid medications. Chronic pain and opioid use disorder both represent complex human conditions affecting millions of Americans and causing untold disability and loss of function. In the context of the growing opioid problem, the U.S. Food and Drug Administration (FDA) launched an Opioids Action Plan in early 2016. As part of this plan, the FDA asked the National Academies of Sciences, Engineering, and Medicine to convene a committee to update the state of the science on pain research, care, and education and to identify actions the FDA and others can take to respond to the opioid epidemic, with a particular focus on informing FDA's development of a formal method for incorporating individual and societal considerations into its risk-benefit framework for opioid approval and monitoring.