Download or read book Traffic Engineering with MPLS written by Eric D. Osborne and published by Cisco Press. This book was released on 2002 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, configure, and manage MPLS TE to optimize network performance Almost every busy network backbone has some congested links while others remain underutilized. That's because shortest-path routing protocols send traffic down the path that is shortest without considering other network parameters, such as utilization and traffic demands. Using Traffic Engineering (TE), network operators can redistribute packet flows to attain more uniform distribution across all links. Forcing traffic onto specific pathways allows you to get the most out of your existing network capacity while making it easier to deliver consistent service levels to customers at the same time. Cisco(r) Multiprotocol Label Switching (MPLS) lends efficiency to very large networks, and is the most effective way to implement TE. MPLS TE routes traffic flows across the network by aligning resources required by a given flow with actual backbone capacity and topology. This constraint-based routing approach feeds the network route traffic down one or more pathways, preventing unexpected congestion and enabling recovery from link or node failures. Traffic Engineering with MPLSprovides you with information on how to use MPLS TE and associated features to maximize network bandwidth. This book focuses on real-world applications, from design scenarios to feature configurations to tools that can be used in managing and troubleshooting MPLS TE. Assuming some familiarity with basic label operations, this guide focuses mainly on the operational aspects of MPLS TE-how the various pieces work and how to configure and troubleshoot them. Additionally, this book addresses design and scalability issues along with extensive deployment tips to help you roll out MPLS TE on your own network. Understand the background of TE and MPLS, and brush up on MPLS forwarding basics Learn about router information distribution and how to bring up MPLS TE tunnels in a network Understand MPLS TE's Constrained Shortest Path First (CSPF) and mechanisms you can use to influence CSPF's path calculation Use the Resource Reservation Protocol (RSVP) to implement Label-Switched Path setup Use various mechanisms to forward traffic down a tunnel Integrate MPLS into the IP quality of service (QoS) spectrum of services Utilize Fast Reroute (FRR) to mitigate packet loss associated with link and node failures Understand Simple Network Management Protocol (SNMP)-based measurement and accounting services that are available for MPLS Evaluate design scenarios for scalable MPLS TE deployments Manage MPLS TE networks by examining common configuration mistakes and utilizing tools for troubleshooting MPLS TE problems "Eric and Ajay work in the development group at Cisco that built Traffic Engineering. They are among those with the greatest hands-on experience with this application. This book is the product of their experience." -George Swallow, Cisco Systems, Architect for Traffic Engineering Co-Chair, IETF MPLS Working Group Eric Osborne, CCIE(r) #4122, has been doing Internet engineering of one sort or another since 1995. He joined Cisco in 1998 to work in the Cisco Technical Assistance Center (TAC), moved from there to the ISP Expert team and then to the MPLS Deployment team. He has been involved in MPLS since the Cisco IOS(r) Software Release 11.1CT days. Ajay Simha, CCIE #2970, joined the Cisco TAC in 1996. He then went on to support tier 1 and 2 ISPs as part of Cisco's ISP Expert team. Ajay has been working as an MPLS deployment engineer since October 1999, and he has first-hand experience in troubleshooting, designing, and deploying MPLS.

Download or read book Advanced MPLS Design and Implementation written by Vivek Alwayn and published by Cisco Press. This book was released on 2001 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth guide to understanding advanced MPLS implementation, including packet-based VPNs, ATM-based VPNs, traffic engineering, and quality of service "Advanced MPLS Design and Implementation" enables you to: Understand MPLS through a detailed analysis of MPLS architecture and operationDesign and implement packet-based MPLS Virtual Private Networks (VPNs) using label switching routers (LSRs)Design and implement ATM-based MPLS VPNs using WAN-switched ATM LSRsImplement MPLS traffic engineering on your core network and optimize traffic flows dynamicallyImplement MPLS QoS and provide hard service guarantees with multiple classes of serviceAcquire practical design and implementation knowledge of real-world MPLS VPNs, TE, and QoS through case studies and configuration examples Multiprotocol Label Switching (MPLS) is a highly scalable, high-performance forwarding technology that has multiple applications in the service provider and enterprise environment. This book is intended for internetwork engineers and administrators who are responsible for designing, implementing, and supporting service provider or enterprise MPLS backbone networks. It contains a broad range of technical details on MPLS and its associated protocols, packet-based MPLS, ATM-based MPLS, MPLS traffic engineering, MPLS QoS, MPLS design, and advanced MPLS architectures. This book contains MPLS theory, design, configuration, and various case studies. Use this book as a reference and guide for designing, implementing, and supporting an MPLS network. Even if you're not using Cisco(r) equipment, this book can increase your awareness and understanding of MPLS technology as well as provide you with detailed designconcepts and rules for building scalable MPLS networks. "Advanced MPLS Design and Implementation" is your guide to understanding, designing, and implementing MPLS VPNs, WAN-switched MPLS VPNs, MPLS traffic engineering, and MPLS QoS.

Download or read book MPLS written by Bruce S. Davie and published by Morgan Kaufmann. This book was released on 2000 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Written by two of the foremost experts on the subject who illustrate concepts with practical examples of their application. The most authoritative text on MPLS. Highly Recommended!" -Daniel Awduche Distinguished Technical Member UUNET (MCI Worldcom) "At last a comprehensive presentation of MPLS reflecting its development and usage, this book is a MUST for any Network Engineering Manager contemplating the deployment of MPLS." -Monique Jeanne Morrow IP Engineering Manager Swisscom AG "Davie and Rekhter provide a detailed and unbiased chronology of the evolution of MPLS. Their scientific approach to decomposing various protocols into their fundamental elements is interwoven with a more pragmatic compilation of diagrams, typical networking scenarios, and applications. Provides a solid knowledge base for researchers and operators dedicated to MPLS and its future." -Eric Dean Senior Director, Internetwork Engineering Global One Multiprotocol Label Switching (MPLS) is now a widely deployed technology, which addresses a variety of issues, including traffic engineering, Quality of Service, Virtual Private Networks, and IP/ATM integration. MPLS: Technology and Applications is the first book that provides a detailed analysis of the architecture, protocols, and application of MPLS. Written by experts who personally authored key parts of the standard, this book will enable network operators and designers to determine which aspects of networks would benefit from MPLS. It is also a definitive reference for engineers implementing MPLS-based products. Features: Covers major applications of MPLS: traffic engineering, VPNs, IP/ATM integration, and QoS Describes all the major protocols that comprise MPLS, including LDP, RSVP, and CR-LDP Goes beyond the RFCs to explain how and why key design decisions were made Provides a complete discussion of constraint-based routing

Download or read book MPLS Next Steps written by Bruce S. Davie and published by Morgan Kaufmann. This book was released on 2008-06-11 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiprotocol Label Switching (MPLS) is a data plane and control technology that is used in packet (that is Internet Protocol) networks. Now over ten years old, it has taken root firmly as a fundamental tool in many service provider networks. The last ten years have seen a considerable consolidation of MPLS techniques and protocols. This has resulted in the abandoning of some of the original features of MPLS, and the development of other new features. MPLS has moved from a prospective solution, to a grown-up technology. Now that MPLS has reached this level of maturity, these new tools and features allow more sophisticated services to the users of the network. These tools and features are discussed within various contexts throughout several networking-related books published by MK and this presents us with a unique publishing opportunity. The proposed book is a best-of-the-best collection of existing content from several books MK has published in recent years on MPLS technology (multi-label protocol switching). Individual chapters on MPLS technology are derived from a handful of MK books and are combined in one new volume in a way that makes sense as a reference work for those interested in new and developing aspects of this technology, i.e., network operators and designers who need to determine which aspects of their networks would benefit from MPLS technology and applications. It also serves as a definitive reference for engineers implementing MPLS-based products.This book represents a quick and efficient way to bring valuable content together from leading experts in the field while creating a one-stop-shopping opportunity for customers to receive the information they would otherwise need to round up from separate sources. Suitable and current content will be collected from the following titles: Evans, Deploying IP and MPLS QoS (2006); Farrel, GMPLS (2005); Ash, Traffic Engineering (2006); Vasseur, Network Recovery (2005); Farrel, The Internet and Its Protocols (2004); Nadeau, MPLS Management (2003); and Davie, MPLS Technology and Applications (2000). These chapters will be updated where necessary and two new chapters will be added at the beginning and the end of the book to bring the content into focus and discuss next generation developments. - Coverage of major applications of MPLS such as traffic engineering, VPNs, IP integration, GMPLS, and QoS written by leading experts in the field contributes to your practical knowledge of this key technology - Shows you how to implement various MPLS applications that will result in saving your organization time and money - Shows you how you can evaluate MPLS applications and techniques in relation to one another so you can develop an optimum network design

Download or read book Rick Gallahers MPLS Training Guide written by Syngress and published by Elsevier. This book was released on 2004-01-06 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rick Gallahers MPLS Training Guide introduces readers to mpls concepts, installation, migration, operation, inspection, and troubleshooting. It discusses specific router and switch platforms and includes such topics as frame-mode mpls, cell-mode mpls, label distribution protocol, tag distribution protocol, label distribution protocol migration, mpls configuration, traffic engineering, mpls vpns, mpls vpn deployment models, mpls vpn routing protocol support, multi-protocol bgp, mpls vpn configurations, mpls vpn integration, and mpls vpn management. - Readers will find complete ready-to-use configurations for routers - Shows how to implement MPLS traffic engineering on a core network and optimize traffic - Great for users studying for Cisco's Implementing Cisco MPLS exam, 640-910 and written by a Cisco internetworking expert who knows everything about MPLS - Includes coverage of Cisco Systems' newly released (October 7, 2002) Multiprotocol Label Switching (MPLS) - Bandwidth Protection software package. The new architecture uses MPLS Traffic Engineering Fast Reroute and an offline application called Tunnel Builder Pro to increase resiliency at a network-wide level - Includes updated coverage of MPLS and GMPLS

Download or read book MPLS Enabled Applications written by Ina Minei and published by John Wiley & Sons. This book was released on 2010-12-10 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a foreword by Yakov Rekhter "Here at last is a single, all encompassing resource where the myriad applications sharpen into a comprehensible text that first explains the whys and whats of each application before going on to the technical detail of the hows." —Kireeti Kompella, CTO Junos, Juniper Networks The authoritative guide to MPLS, now in its Third edition, fully updated with brand new material! MPLS is now considered the networking technology for carrying all types of network traffic, including voice telephony, real-time video, and data traffic. In MPLS-Enabled Applications, Third Edition, the authors methodically show how MPLS holds the key to network convergence by allowing operators to offer more services over a single physical infrastructure. The Third Edition contains more than 170 illustrations, new chapters, and more coverage, guiding the reader from the basics of the technology, though all its major VPN applications. MPLS Enabled-Applications contains up-to-date coverage of: The current status and future potential of all major MPLS applications, including L2VPN, L3VPN, pseudowires and VPLS. A new chapter with up to date coverage of the MPLS transport profile, MPLS-TP. MPLS in access networks and Seamless MPLS, the new architecture for extending MPLS into the access, discussed in depth for both the unicast and the multicast case. Extensive coverage of multicast support in L3VPNs (mVPNs), explaining and comparing both the PIM/GRE and the next generation BGP/MPLS solutions, and including a new chapter on advanced topics in next generation multicast VPNs. A new chapter on advanced protection techniques, including detailed discussion of 50 ms end-to-end service restoration. Comprehensive coverage of the base technology, as well as the latest IETF drafts, including topics such as pseudowire redundancy, VPLS multihoming, IRB and P2MP pseudowires. MPLS-Enabled Applications will provide those involved in the design and deployment of MPLS systems, as well as those researching the area of MPLS networks, with a thoroughly modern view of how MPLS is transforming the networking world. "Essential new material for those trying to understand the next steps in MPLS." —Adrian Farrel, IETF Routing Area Director "MPLS-Enabled Applications takes a unique and creative approach in explaining MPLS concepts and how they are applied in practice to meet the needs of Enterprise and Service Provider networks. I consistently recommend this book to colleagues in the engineering, education and business community." —Dave Cooper, Chief IP Technologist, Global Crossing Ltd

Download or read book MPLS for Metropolitan Area Networks written by Nam-Kee Tan and published by CRC Press. This book was released on 2004-11-15 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: MPLS for Metropolitan Area Networks demonstrates solutions provided by MPLS features. The text opens with an overview of metro networks and MPLS. It examines traffic engineering issues, focusing on fundamental TE concepts and network control. The author then discusses how MPLS can bring increased reliability to Metropolitan Area Networks (MANs), and concludes with a detailed analysis of the service aspects of MANs. Topics reviewed include L3 and L2 MPLS VPNs, geographically dispersed Ethernet multipoint services, virtual private LAN services (VPLS), and the integrated services (IntServ) and differentiated services (DiffServ) QoS models with respect to MPLS.

Download or read book MPLS Fundamentals written by Luc De Ghein and published by Cisco Press. This book was released on 2016-08-02 with total page 1270 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to all facets of MPLS theory and practice Helps networking professionals choose the suitable MPLS application and design for their network Provides MPLS theory and relates to basic IOS configuration examples The Fundamentals Series from Cisco Press launches the basis to readers for understanding the purpose, application, and management of technologies MPLS has emerged as the new networking layer for service providers throughout the world. For many service providers and enterprises MPLS is a way of delivering new applications on their IP networks, while consolidating data and voice networks. MPLS has grown to be the new default network layer for service providers and is finding its way into enterprise networks as well. This book focuses on the building blocks of MPLS (architecture, forwarding packets, LDP, MPLS and QoS, CEF, etc.). This book also reviews the different MPLS applications (MPLS VPN, MPLS Traffic Engineering, Carrying IPv6 over MPLS, AToM, VPLS, MPLS OAM etc.). You will get a comprehensive overview of all the aspects of MPLS, including the building blocks, its applications, troubleshooting and a perspective on the future of MPLS.

Download or read book Definitive MPLS Network Designs written by Jim Guichard and published by Cisco Press. This book was released on 2005-03-14 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field-proven MPLS designs covering MPLS VPNs, pseudowire, QoS, traffic engineering, IPv6, network recovery, and multicast Understand technology applications in various service provider and enterprise topologies via detailed design studies Benefit from the authors’ vast experience in MPLS network deployment and protocol design Visualize real-world solutions through clear, detailed illustrations Design studies cover various operator profiles including an interexchange carrier (IXC), a national telco deploying a multiservice backbone carrying Internet and IP VPN services as well as national telephony traffic, an international service provider with many POPs all around the globe, and a large enterprise relying on Layer-3 VPN services to control communications within and across subsidiaries Design studies are thoroughly explained through detailed text, sample configurations, and network diagrams Definitive MPLS Network Designs provides examples of how to combine key technologies at the heart of IP/MPLS networks. Techniques are presented through a set of comprehensive design studies. Each design study is based on characteristics and objectives common to a given profile of network operators having deployed MPLS and discusses all the corresponding design aspects. The book starts with a technology refresher for each of the technologies involved in the design studies. Next, a series of design studies is presented, each based on a specific hypothetical network representative of service provider and enterprise networks running MPLS. Each design study chapter delivers four elements. They open with a description of the network environment, including the set of supported services, the network topology, the POP structure, the transmission facilities, the basic IP routing design, and possible constraints. Then the chapters present design objectives, such as optimizing bandwidth usage. Following these are details of all aspects of the network design, covering VPN, QoS, TE, network recovery, and—where applicable—multicast, IPv6, and pseudowire. The chapters conclude with a summary of the lessons that can be drawn from the design study so that all types of service providers and large enterprise MPLS architects can adapt aspects of the design solution to their unique network environment and objectives. Although network architects have many resources for seeking information on the concepts and protocols involved with MPLS, there is no single resource that illustrates how to design a network that optimizes their benefits for a specific operating environment. The variety of network environments and requirements makes it difficult to provide a one-size-fits-all design recommendation. Definitive MPLS Network Designs fills this void. “This book comes as a boon to professionals who want to understand the power of MPLS and make full use of it.” -Parantap Lahiri, Manager, IP Network Infrastructure Engineering, MCI Includes a FREE 45-Day Online Edition This book is part of the Networking Technology Series from Cisco Press®, which offers networking professionals valuable information for constructing efficient networks, understanding new technologies, and building successful careers.

Download or read book QoS for IP MPLS Networks written by Santiago Alvarez and published by Cisco Press. This book was released on 2006-06-02 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to implementing QoS in IP/MPLS networks using Cisco IOS and Cisco IOS XR Software Understand IP QoS architectures and how they apply to MPLS Take a detailed look at traffic management using policing, shaping, scheduling, and active queue management Study Cisco QoS behavioral model and the modular QoS command-line interface (MQC) Learn the operation of MPLS TE with its DiffServ extensions and applicability as a traffic-protection alternative Find multiple configuration and verification examples illustrating the implementation of MPLS TE, DS-TE, and FRR Review the different designs, ranging from a best-effort backbone to the most elaborate scenarios combining DiffServ, DS-TE, and FRR Quality of service (QoS) plays a key role in the implementation of IP and MPLS networks today. However, QoS can be one of the most complex aspects of networking. The industry efforts to achieve convergence have generated a need for increased levels of traffic differentiation. Today’s networks need to meet an array of QoS requirements to support distinct applications (such as voice, video, and data) and multiple network services (such as IP, Ethernet, and ATM) on a single converged, multiservice network. QoS has therefore has become an integral part of network design, implementation, and operation. QoS for IP/MPLS Networks is a practical guide that will help you facilitate the design, deployment, and operation of QoS using Cisco® IOS® Software and Cisco IOS XR Software. The book provides a thorough explanation of the technology behind MPLS QoS and related technologies, including the different design options you can use to build an MPLS network with strict performance requirements. This book discusses MPLS Traffic Engineering (MPLS TE) as a tool to complement MPLS QoS and enhance the performance characteristics of the network. You’ll learn technology, configuration, and operational details, including the essentials facts about the behavior and configuration of the rich MPLS QoS and related MPLS TE functionality. To get the most out of this book, you should have a basic understanding of both IP and MPLS, including the basics of IP addressing and routing and the basics of MPLS forwarding.

Download or read book Cisco Router Configuration Handbook written by David Hucaby and published by Pearson Education. This book was released on 2010-06-30 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fast answers and reliable solutions for all widely-used Cisco router features - all in one time-saving guide Organized for maximum efficiency: describes actual commands and options in the sequence they should be used Helps network pros eliminate time-consuming documentation searches Extensive updates: IPv6, MPLS, AutoQoS, SIP, MGCP, voice troubleshooting, VPNs, security, and more "At-a-glance" illustrations offer fast answers and easy double-checking Locating reliable Cisco router configuration command information can require extensive, time-consuming research. Cisco Router Configuration Handbook, 2/e, is the solution: a day-to-day reference to the most widely used Cisco router features and configurations. Straight from Cisco experts, it covers every facet of router configuration, including fundamentals, network protocols, packet processing, voice/telephony, security, and more. This book is organized for maximum efficiency. Related features are covered together, and features and options are covered in the sequence in which they are typically used. Shaded tabs mark each section for quick reference. Information on each feature, technology, or protocol is presented in a concise one- or two-page format, with sections presenting quick facts, configuration information, and step-by-step examples, including both required and optional commands. Simply put, this book brings together all the Cisco routing configuration information most network professionals will ever need - and organizes it more efficiently than any other resource.

Download or read book MPLS in the SDN Era written by Antonio Sanchez Monge and published by "O'Reilly Media, Inc.". This book was released on 2015-12-07 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: How can you make multivendor services work smoothly on today’s complex networks? This practical book shows you how to deploy a large portfolio of multivendor Multiprotocol Label Switching (MPLS) services on networks, down to the configuration level. You’ll learn where Juniper Network's Junos, Cisco's IOS XR, and OpenContrail, interoperate and where they don’t. Two network and cloud professionals from Juniper describe how MPLS technologies and applications have rapidly evolved through services and architectures such as Ethernet VPNs, Network Function Virtualization, Seamless MPLS, Egress Protection, External Path Computation, and more. This book contains no vendor bias or corporate messages, just solid information on how to get a multivendor network to function optimally. Topics include: Introduction to MPLS and Software-Defined Networking (SDN) The four MPLS Builders (LDP, RSVP-TE, IGP SPRING, and BGP) Layer 3 unicast and multicast MPLS services, Layer 2 VPN, VPLS, and Ethernet VPN Inter-domain MPLS Services Underlay and overlay architectures: data centers, NVO, and NFV Centralized Traffic Engineering and TE bandwidth reservations Scaling MPLS transport and services Transit fast restoration based on the IGP and RSVP-TE FIB optimization and egress service for fast restoration

Download or read book IP Switching and Routing Essentials written by Stephen A. Thomas and published by John Wiley & Sons. This book was released on 2002 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only complete source of information on IP switching and routing technologies A master at distilling complex need-to-know networking technologies into a clear, to-the-point narrative, proven author Stephen Thomas now tackles IP switching and routing--the backbone of all Internet communications. He presents all the relevant technologies in the context of real-world applications, offering concise explanations and over 150 illustrations that make complex topics easy to understand. An invaluable resource for network managers and service provider professionals, this book delivers complete coverage of routing technologies--distance vector, link state, and path vector--as well as the full roster of Internet standard routing protocols: Routing Information Protocol (RIP), Border Gateway Protocol (BGP), and Open Shortest Path First (OSPF). The text then documents advances that enable Multi Protocol Label Switching (MPLS), including the MPLS architecture, its interaction with standards routing protocols, Constraint-Based Label Distribution Protocol (CR-LDP), and traffic engineering extensions to the Resource Reservation Protocol (RSVP-TE).

Download or read book Traffic Engineering and QoS Optimization of Integrated Voice and Data Networks written by Gerald R. Ash and published by Elsevier. This book was released on 2006-11-03 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes, analyzes, and recommends traffic engineering (TE) and quality of service (QoS) optimization methods for integrated voice/data dynamic routing networks. These functions control a network's response to traffic demands and other stimuli, such as link failures or node failures. TE and QoS optimization is concerned with measurement, modeling, characterization, and control of network traffic, and the application of techniques to achieve specific performance objectives. The scope of the analysis and recommendations include dimensioning, call/flow and connection routing, QoS resource management, routing table management, dynamic transport routing, and operational requirements. Case studies are included which provide the reader with a concrete way into the technical details and highlight why and how to use the techniques described in the book. - Includes Case Studies of MPLS and GMPLS Network Optimization - Presents state-of-the-art traffic engineering and quality of service optimization methods and illustrates the tradeoffs between the various methods discussed - Contains practical Case Studies based on large-scale service provider implementations and architecture plans - Written by a highly respected and well known active expert in traffic engineering and quality of service

Download or read book Deploying IP and MPLS QoS for Multiservice Networks written by John William Evans and published by Elsevier. This book was released on 2010-07-26 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: QoS, short for "quality of service, is one of the most important goals a network designer or administrator will have. Ensuring that the network runs at optimal precision with data remaining accurate, traveling fast, and to the correct user are the main objectives of QoS. The various media that fly across the network including voice, video, and data have different idiosyncrasies that try the dimensions of the network. This malleable network architecture poses an always moving potential problem for the network professional.The authors have provided a comprehensive treatise on this subject. They have included topics such as traffic engineering, capacity planning, and admission control. This book provides real world case studies of QoS in multiservice networks. These case studies remove the mystery behind QoS by illustrating the how, what, and why of implementing QoS within networks. Readers will be able to learn from the successes and failures of these actual working designs and configurations. - Helps readers understand concepts of IP QoS by presenting clear descriptions of QoS components, architectures, and protocols - Directs readers in the design and deployment of IP QoS networks through fully explained examples of actual working designs - Contains real life case studies which focus on implementation

Download or read book Fault tolerant IP and MPLS Networks written by Iftekhar Hussain and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helping readers master important IP and MPLS concepts, this instructive resource is written by a technical leader for the MPLS Group from Cisco Systems Internet Technologies Division. The book guides networking professionals as they design fault tolerant networks.

Download or read book MPLS Configuration on Cisco IOS Software written by Lancy Lobo and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete configuration manual for MPLS, MPLS VPNs, MPLS TE, QoS, Any Transport over MPLS (AToM), and VPLS Understand the crucial Cisco commands for various MPLS scenarios Understand fundamentals of MPLS operation and learn to configure basic MPLS in Frame Relay and ATM-based environments Master fundamentals of MPLS VPN operation including Multiprotocol BGP (MBGP) operation, VPNv4 route exchange, and basic MPLS VPN configuration in the provider network Understand and configure various PE-CE routing protocols in MPLS VPN networks Understand MPLS VPN provisioning in an Inter-provider VPN (Inter-AS) and Carrier Supporting Carrier (CSC) environment Learn MPLS TE and its advanced features Examine AToM with configuration examples for like-to-like and any-to-any L2 VPN implementations and VPLS components and operation, VPLS configuration and verification, and VPLS topologies Learn about MPLS QoS, including configuration and implementation of uniform and short pipe modes MPLS Configuration on Cisco IOS Softwareis a complete and detailed resource to the configuration of Multiprotocol Label Switching (MPLS) networks and associated features. Through its practical, hands-on approach, you’ll become familiar with MPLS technologies and their configurations using Cisco IOS® Software. MPLS Configuration on Cisco IOS Softwarecovers basic-to-advanced MPLS concepts and configuration. Beyond its emphasis on MPLS, you’ll learn about applications and deployments associated with MPLS, such as traffic engineering (TE), Layer 2 virtual private networks (VPN), and Virtual Private LAN Service (VPLS). You’ll receive practical guidance and deployment scenarios that can be enhanced by re-creation of the setups and configurations demonstrated within this book. You’ll move quickly from a brief overview of MPLS technology and basic MPLS configuration on Cisco® routers to more advanced topics. Several chapters provide instruction on VPN connectivity options, including implementing Border Gateway Protocol (BGP) in MPLS VPNs. You’ll receive configuration guidelines for advanced MPLS implementations such as MPLS TE, quality of service (QoS), and extranet VPNs. You’ll learn about implementation of Layer 2 VPNs versus Layer 3 VPNs with Cisco Any Transport over MPLS (AToM). And you’ll see demonstrations of implementing VPLS on Cisco routers complete with the configurations and platform support. “I highly recommendMPLS Configuration on Cisco IOS Softwareas required reading for those in search of practical guidance of the technology and nuances of configuring MPLS for next-generation networks for voice, video, data, and application service offerings across a wide variety of deployment scenarios.” –Carlos Dominguez, Senior Vice President, Worldwide Service Provider Operations, Cisco Systems® This book is part of the Networking Technology Series from Cisco Press®, which offers networking professionals valuable information for constructing efficient networks, understanding new technologies, and building successful careers.