Download or read book Traffic Congestion Control by PDE Backstepping written by Huan Yu and published by Springer Nature. This book was released on 2022-12-16 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph explores the design of controllers that suppress oscillations and instabilities in congested traffic flow using PDE backstepping methods. The first part of the text is concerned with basic backstepping control of freeway traffic using the Aw-Rascle-Zhang (ARZ) second-order PDE model. It begins by illustrating a basic control problem – suppressing traffic with stop-and-go oscillations downstream of ramp metering – before turning to the more challenging case for traffic upstream of ramp metering. The authors demonstrate how to design state observers for the purpose of stabilization using output-feedback control. Experimental traffic data are then used to calibrate the ARZ model and validate the boundary observer design. Because large uncertainties may arise in traffic models, adaptive control and reinforcement learning methods are also explored in detail. Part II then extends the conventional ARZ model utilized until this point in order to address more complex traffic conditions: multi-lane traffic, multi-class traffic, networks of freeway segments, and driver use of routing apps. The final chapters demonstrate the use of the Lighthill-Whitham-Richards (LWR) first-order PDE model to regulate congestion in traffic flows and to optimize flow through a bottleneck. In order to make the text self-contained, an introduction to the PDE backstepping method for systems of coupled first-order hyperbolic PDEs is included. Traffic Congestion Control by PDE Backstepping is ideal for control theorists working on control of systems modeled by PDEs and for traffic engineers and applied scientists working on unsteady traffic flows. It will also be a valuable resource for researchers interested in boundary control of coupled systems of first-order hyperbolic PDEs.

Download or read book Control Theory and Inverse Problems written by Kaïs Ammari and published by Springer Nature. This book was released on with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book AI enabled Technologies for Autonomous and Connected Vehicles written by Yi Lu Murphey and published by Springer Nature. This book was released on 2022-09-07 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and advances in the field of intelligent vehicle systems. It presents a broad range of AI-enabled technologies, with a focus on automated, autonomous and connected vehicle systems. It covers advanced machine learning technologies, including deep and reinforcement learning algorithms, transfer learning and learning from big data, as well as control theory applied to mobility and vehicle systems. Furthermore, it reports on cutting-edge technologies for environmental perception and vehicle-to-everything (V2X), discussing socioeconomic and environmental implications, and aspects related to human factors and energy-efficiency alike, of automated mobility. Gathering chapters written by renowned researchers and professionals, this book offers a good balance of theoretical and practical knowledge. It provides researchers, practitioners and policy makers with a comprehensive and timely guide on the field of autonomous driving technologies.

Download or read book Adaptive Control of Parabolic PDEs written by Andrey Smyshlyaev and published by Princeton University Press. This book was released on 2010-07-01 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a comprehensive methodology for adaptive control design of parabolic partial differential equations with unknown functional parameters, including reaction-convection-diffusion systems ubiquitous in chemical, thermal, biomedical, aerospace, and energy systems. Andrey Smyshlyaev and Miroslav Krstic develop explicit feedback laws that do not require real-time solution of Riccati or other algebraic operator-valued equations. The book emphasizes stabilization by boundary control and using boundary sensing for unstable PDE systems with an infinite relative degree. The book also presents a rich collection of methods for system identification of PDEs, methods that employ Lyapunov, passivity, observer-based, swapping-based, gradient, and least-squares tools and parameterizations, among others. Including a wealth of stimulating ideas and providing the mathematical and control-systems background needed to follow the designs and proofs, the book will be of great use to students and researchers in mathematics, engineering, and physics. It also makes a valuable supplemental text for graduate courses on distributed parameter systems and adaptive control.

Download or read book Input to State Stability for PDEs written by Iasson Karafyllis and published by Springer. This book was released on 2018-06-07 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book lays the foundation for the study of input-to-state stability (ISS) of partial differential equations (PDEs) predominantly of two classes—parabolic and hyperbolic. This foundation consists of new PDE-specific tools. In addition to developing ISS theorems, equipped with gain estimates with respect to external disturbances, the authors develop small-gain stability theorems for systems involving PDEs. A variety of system combinations are considered: PDEs (of either class) with static maps; PDEs (again, of either class) with ODEs; PDEs of the same class (parabolic with parabolic and hyperbolic with hyperbolic); and feedback loops of PDEs of different classes (parabolic with hyperbolic). In addition to stability results (including ISS), the text develops existence and uniqueness theory for all systems that are considered. Many of these results answer for the first time the existence and uniqueness problems for many problems that have dominated the PDE control literature of the last two decades, including—for PDEs that include non-local terms—backstepping control designs which result in non-local boundary conditions. Input-to-State Stability for PDEs will interest applied mathematicians and control specialists researching PDEs either as graduate students or full-time academics. It also contains a large number of applications that are at the core of many scientific disciplines and so will be of importance for researchers in physics, engineering, biology, social systems and others.

Download or read book Extremum Seeking Through Delays and PDEs written by Tiago Roux Oliveira and published by SIAM. This book was released on 2022-12-05 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extremum Seeking through Delays and PDEs, the first book on the topic, expands the scope of applicability of the extremum seeking method, from static and finite-dimensional systems to infinite-dimensional systems. Readers will find numerous algorithms for model-free real-time optimization are developed and their convergence guaranteed, extensions from single-player optimization to noncooperative games, under delays and PDEs, are provided, the delays and PDEs are compensated in the control designs using the PDE backstepping approach, and stability is ensured using infinite-dimensional versions of averaging theory, and accessible and powerful tools for analysis. This book is intended for control engineers in all disciplines (electrical, mechanical, aerospace, chemical), mathematicians, physicists, biologists, and economists. It is appropriate for graduate students, researchers, and industrial users.

Download or read book Control of Partial Differential Equations written by Giuseppe Da Prato and published by CRC Press. This book was released on 1994-08-19 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This useful reference provides recent results as well as entirely new material on control problems for partial differential equations.

Download or read book Materials Phase Change PDE Control Estimation written by Shumon Koga and published by Springer Nature. This book was released on 2020-11-01 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph introduces breakthrough control algorithms for partial differential equation models with moving boundaries, the study of which is known as the Stefan problem. The algorithms can be used to improve the performance of various processes with phase changes, such as additive manufacturing. Using the authors' innovative design solutions, readers will also be equipped to apply estimation algorithms for real-world phase change dynamics, from polar ice to lithium-ion batteries. A historical treatment of the Stefan problem opens the book, situating readers in the larger context of the area. Following this, the chapters are organized into two parts. The first presents the design method and analysis of the boundary control and estimation algorithms. Part two then explores a number of applications, such as 3D printing via screw extrusion and laser sintering, and also discusses the experimental verifications conducted. A number of open problems and provided as well, offering readers multiple paths to explore in future research. Materials Phase Change PDE Control & Estimation is ideal for researchers and graduate students working on control and dynamical systems, and particularly those studying partial differential equations and moving boundaries. It will also appeal to industrial engineers and graduate students in engineering who are interested in this area.

Download or read book Adaptive Control of Hyperbolic PDEs written by Henrik Anfinsen and published by Springer. This book was released on 2019-02-21 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive Control of Linear Hyperbolic PDEs provides a comprehensive treatment of adaptive control of linear hyperbolic systems, using the backstepping method. It develops adaptive control strategies for different combinations of measurements and actuators, as well as for a range of different combinations of parameter uncertainty. The book treats boundary control of systems of hyperbolic partial differential equations (PDEs) with uncertain parameters. The authors develop designs for single equations, as well as any number of coupled equations. The designs are accompanied by mathematical proofs, which allow the reader to gain insight into the technical challenges associated with adaptive control of hyperbolic PDEs, and to get an overview of problems that are still open for further research. Although stabilization of unstable systems by boundary control and boundary sensing are the particular focus, state-feedback designs are also presented. The book also includes simulation examples with implementational details and graphical displays, to give readers an insight into the performance of the proposed control algorithms, as well as the computational details involved. A library of MATLAB® code supplies ready-to-use implementations of the control and estimation algorithms developed in the book, allowing readers to tailor controllers for cases of their particular interest with little effort. These implementations can be used for many different applications, including pipe flows, traffic flow, electrical power lines, and more. Adaptive Control of Linear Hyperbolic PDEs is of value to researchers and practitioners in applied mathematics, engineering and physics; it contains a rich set of adaptive control designs, including mathematical proofs and simulation demonstrations. The book is also of interest to students looking to expand their knowledge of hyperbolic PDEs.

Download or read book Stability and Boundary Stabilization of 1 D Hyperbolic Systems written by Georges Bastin and published by Birkhäuser. This book was released on 2016-08-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph explores the modeling of conservation and balance laws of one-dimensional hyperbolic systems using partial differential equations. It presents typical examples of hyperbolic systems for a wide range of physical engineering applications, allowing readers to understand the concepts in whichever setting is most familiar to them. With these examples, it also illustrates how control boundary conditions may be defined for the most commonly used control devices. The authors begin with the simple case of systems of two linear conservation laws and then consider the stability of systems under more general boundary conditions that may be differential, nonlinear, or switching. They then extend their discussion to the case of nonlinear conservation laws and demonstrate the use of Lyapunov functions in this type of analysis. Systems of balance laws are considered next, starting with the linear variety before they move on to more general cases of nonlinear ones. They go on to show how the problem of boundary stabilization of systems of two balance laws by both full-state and dynamic output feedback in observer-controller form is solved by using a “backstepping” method, in which the gains of the feedback laws are solutions of an associated system of linear hyperbolic PDEs. The final chapter presents a case study on the control of navigable rivers to emphasize the main technological features that may occur in real live applications of boundary feedback control. Stability and Boundary Stabilization of 1-D Hyperbolic Systems will be of interest to graduate students and researchers in applied mathematics and control engineering. The wide range of applications it discusses will help it to have as broad an appeal within these groups as possible.

Download or read book Applications of Time Delay Systems written by John Chiasson and published by Springer Science & Business Media. This book was released on 2007-02-08 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an update of the latest research in control of time delay systems and applications by world leading experts. It will appeal to engineers, researchers and students in Control.

Download or read book Real Time Optimization by Extremum Seeking Control written by Kartik B. Ariyur and published by John Wiley & Sons. This book was released on 2003-10-03 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-close look at the theory behind and application of extremum seeking Originally developed as a method of adaptive control for hard-to-model systems, extremum seeking solves some of the same problems as today's neural network techniques, but in a more rigorous and practical way. Following the resurgence in popularity of extremum-seeking control in aerospace and automotive engineering, Real-Time Optimization by Extremum-Seeking Control presents the theoretical foundations and selected applications of this method of real-time optimization. Written by authorities in the field and pioneers in adaptive nonlinear control systems, this book presents both significant theoretic value and important practical potential. Filled with in-depth insight and expert advice, Real-Time Optimization by Extremum-Seeking Control: * Develops optimization theory from the points of dynamic feedback and adaptation * Builds a solid bridge between the classical optimization theory and modern feedback and adaptation techniques * Provides a collection of useful tools for problems in this complex area * Presents numerous applications of this powerful methodology * Demonstrates the immense potential of this methodology for future theory development and applications Real-Time Optimization by Extremum-Seeking Control is an important resource for both students and professionals in all areas of engineering-electrical, mechanical, aerospace, chemical, biomedical-and is also a valuable reference for practicing control engineers.

Download or read book Artificial Intelligence and Industrial Applications written by Tawfik Masrour and published by Springer Nature. This book was released on 2020-09-01 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the refereed proceedings of the Artificial Intelligence and Industrial Applications (A2IA’2020), the first installment of an annual international conference organized by the ENSAM-Meknes at Moulay Ismail University, Morocco. The 30 papers presented here were carefully reviewed and selected from 141 submissions by an international scientific committee. They address various aspects of artificial intelligence such as smart manufacturing, smart maintenance, smart supply chain management, supervised learning, unsupervised learning, reinforcement learning, graph-based and semi-supervised learning, neural networks, deep learning, planning and optimization, and other AI applications. The book is intended for AI experts, offering them a valuable overview of the status quo and a global outlook for the future, with many new and innovative ideas and recent important developments in AI applications, both of a foundational and practical nature. It will also appeal to non-experts who are curious about this timely and important subject.

Download or read book Advances in Power Systems and Energy Management written by Neeraj Priyadarshi and published by Springer Nature. This book was released on 2021-01-20 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the international conference ETAEERE 2020, and focuses on contemporary issues in energy management and energy efficiency in the context of power systems. The contents cover modeling, simulation and optimization based studies on topics like medium voltage BTB system, cost optimization of a ring frame unit in textile industry, rectenna for RF energy harvesting, ecology and energy dimension in infrastructural designs, study of AGC in two area hydro thermal power system, energy-efficient and reliable depth-based routing protocol for underwater wireless sensor network, and power line communication. This book can be beneficial for students, researchers as well as industry professionals.

Download or read book Recent Developments in Data Science and Business Analytics written by Madjid Tavana and published by Springer. This book was released on 2018-03-27 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume is brought out from the contributions of the research papers presented in the International Conference on Data Science and Business Analytics (ICDSBA- 2017), which was held during September 23-25 2017 in ChangSha, China. As we all know, the field of data science and business analytics is emerging at the intersection of the fields of mathematics, statistics, operations research, information systems, computer science and engineering. Data science and business analytics is an interdisciplinary field about processes and systems to extract knowledge or insights from data. Data science and business analytics employ techniques and theories drawn from many fields including signal processing, probability models, machine learning, statistical learning, data mining, database, data engineering, pattern recognition, visualization, descriptive analytics, predictive analytics, prescriptive analytics, uncertainty modeling, big data, data warehousing, data compression, computer programming, business intelligence, computational intelligence, and high performance computing among others. The volume contains 55 contributions from diverse areas of Data Science and Business Analytics, which has been categorized into five sections, namely: i) Marketing and Supply Chain Analytics; ii) Logistics and Operations Analytics; iii) Financial Analytics. iv) Predictive Modeling and Data Analytics; v) Communications and Information Systems Analytics. The readers shall not only receive the theoretical knowledge about this upcoming area but also cutting edge applications of this domains.

Download or read book Nonlinear Control Under Nonconstant Delays written by Nikolaos Bekiaris-Liberis and published by SIAM. This book was released on 2013-09-25 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors have developed a methodology for control of nonlinear systems in the presence of long delays, with large and rapid variation in the actuation or sensing path, or in the presence of long delays affecting the internal state of a system. In addition to control synthesis, they introduce tools to quantify the performance and the robustness properties of the designs provided in the book. The book is based on the concept of predictor feedback and infinite-dimensional backstepping transformation for linear systems and the authors guide the reader from the basic ideas of the concept?with constant delays only on the input?all the way through to nonlinear systems with state-dependent delays on the input as well as on system states. Readers will find the book useful because the authors provide elegant and systematic treatments of long-standing problems in delay systems, such as systems with state-dependent delays that arise in many applications. In addition, the authors give all control designs by explicit formulae, making the book especially useful for engineers who have faced delay-related challenges and are concerned with actual implementations and they accompany all control designs with Lyapunov-based analysis for establishing stability and performance guarantees.

Download or read book Advances in Distributed Parameter Systems written by Jean Auriol and published by Springer Nature. This book was released on 2022-04-24 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proposed book presents recent breakthroughs for the control of distributed parameter systems and follows on from a workshop devoted to this topic. It introduces new and unified visions of the challenging control problems raised by distributed parameter systems. The book collects contributions written by prominent international experts in the control community, addressing a wide variety of topics. It spans the full range from theoretical research to practical implementation and follows three traverse axes: emerging ideas in terms of control strategies (energy shaping, prediction-based control, numerical control, input saturation), theoretical concepts for interconnected systems (with potential non-linear actuation dynamics), advanced applications (cable-operated elevators, traffic networks), and numerical aspects. Cutting-edge experts in the field contributed in this volume, making it a valuable reference source for control practitioners, graduate students, and scientists researching practical and theoretical solutions to the challenging problems raised by distributed parameter systems.