Download or read book Canadian Homes and Gardens written by and published by . This book was released on 1955 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control Systems for Heating Ventilating and Air Conditioning written by Roger W. Haines and published by Springer Science & Business Media. This book was released on 2006-06-01 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Systems for Heating, Ventilating and Air Conditioning, Sixth Edition is complete and covers both hardware control systems and modern control technology. The material is presented without bias and without prejudice toward particular hardware or software. Readers with an engineering degree will be reminded of the psychrometric processes associated with heating and air conditioning as they learn of the various controls schemes used in the variety of heating and air conditioning system types they will encountered in the field. Maintenance technicians will also find the book useful because it describes various control hardware and control strategies that were used in the past and are prevalent in most existing heating and air conditioning systems. Designers of new systems will find the fundamentals described in this book to be a useful starting point, and they will also benefit from descriptions of new digital technologies and energy management systems. This technology is found in modern building HVAC system designs.
Download or read book HVAC Design Manual for Hospitals and Clinics written by ASHRAE (Firm) and published by Ashrae. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Health care HVAC systems serve facilities in which the population is uniquely vulnerable and exposed to an elevated risk of health, fire, and safety hazard. These heavily regulated, high-stakes facilities undergo continuous maintenance, verification, inspection, and recertification, typically operate 24/7, and are owner occupied for long life. The HVAC systems in health care facilities must be carefully designed to be installed, operated and maintained in coordination with specialized buildings services, including emergency and normal power, plumbing and medical gas systems, automatic transport, fire protections and a myriad of IT systems, all within a limited building envelope.
Download or read book Fundamentals of HVAC Systems written by Robert McDowall and published by Academic Press. This book was released on 2007 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything that new HVAC&R engineers will be expected to learn, from the leading industry body - ASHRAE.
Download or read book Recommended Rules for the Care and Operation of Heating Boilers written by American Society of Mechanical Engineers and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book HVAC written by Arthur A. Bell and published by McGraw-Hill Professional Publishing. This book was released on 2000 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate reference book on the most frequently used HVAC data, chock-full of equations, data, and rules of thumb--a necessary addition to any library for mechanical, architectural, and electrical engineers, HVAC contractors and technicians, and others. Features over 216 equations for everything from air change rates to swimming pools to steel pipes. Includes both ASME and ASHRAE code information, and follows the CSI MasterFormat "TM."
Download or read book Building Systems for Interior Designers written by Corky Binggeli and published by John Wiley & Sons. This book was released on 2011-10-11 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Systems for interior designers Second Edition Corky Binggeli, asid The updated guide to technical building systems for interior designers As integral members of the building design team, interior designers share an increasingly complex and crucial role. Now revised in its second edition, Building Systems for Interior Designers remains the one go-to resource that addresses the special concerns of the interior designer within the broader context of the rest of the building design team. Building Systems for Interior Designers, Second Edition explains technical building systems and engineering issues in a clear and accessible way to interior designers. Covering systems from HVAC to water and waste to lighting, transportation, and safety, author Corky Binggeli enables interior designers to communicate more effectively with architects, engineers, and contractors; collaborate effectively on projects; and contribute to more accurate solutions for a broad range of building considerations. Among the many improvements in the Second Edition are: A deeper engagement with sustainable building design, giving the interior designer the resources needed to participate as part of a sustainable design team A reshaped structure that enhances the reader's understanding of the material Many more illustrations and explanatory captions With a host of features to make the book more up to date, easier to use, and more effective as an instructive guide, Building Systems for Interior Designers, Second Edition is a valuable book for students as well as a practical desktop reference for professionals.
Download or read book Handbook of Air Conditioning and Refrigeration written by Shan K. Wang and published by McGraw Hill Professional. This book was released on 2000-11-07 with total page 1430 pages. Available in PDF, EPUB and Kindle. Book excerpt: * A broad range of disciplines--energy conservation and air quality issues, construction and design, and the manufacture of temperature-sensitive products and materials--is covered in this comprehensive handbook * Provide essential, up-to-date HVAC data, codes, standards, and guidelines, all conveniently located in one volume * A definitive reference source on the design, selection and operation of A/C and refrigeration systems
Download or read book Air Conditioning Principles and Systems written by E. Pita and published by Prentice Hall. This book was released on 1989 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the fundamental concepts of air conditioning and their application to systems. The book explains all concepts in a clear, practical manner, and focuses on problems and examples typically encountered on the job. Uses a minimum of mathematics.
Download or read book The Homeowner s Energy Handbook written by Paul Scheckel and published by Storey Publishing. This book was released on 2013-01-01 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses renewable energy resources and provides instructions for creating energy-saving and energy-producing equipment.
Download or read book Handbook of Energy Audits written by Albert Thumann and published by The Fairmont Press, Inc.. This book was released on 2003 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now there is a comprehensive reference to provide tools on implementing an energy audit for any type of facility. Containing forms, checklists and handy working aids, this book is for anyone implementing an energy audit. Accounting procedures, rate of return, analysis and software programs are included to provide evaluation tools for audit recommendations. Technologies for electrical, mechanical and building systems are covered in detail.
Download or read book No regrets Remodeling written by Home Energy Magazine and published by . This book was released on 1997 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: In No-Regrets Remodeling, the editors of Home Energy magazine show how new technologies and building practices can turn typical remodeling projects into opportunities for long-term benefits that add comfort and value to a home. Using over 100 detailed illustrations, the book describes how to avoid recurring problems including drafts, overheating, mold and mildew, peeling paint, rotting roofs, and indoor air pollution. Guides to selecting heating, cooling, and ventilation equipment, water heaters, insulation lights, and windows demonstrate the advantages of integrating energy efficiency into any remodeling plan.
Download or read book Canadian Wood frame House Construction written by John Burrows and published by Central Mortgage and Housing Corporation. This book was released on 2005 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy reference book walks you through the complete construction of a wood frame house, from excavation to the finishing touches. It is updated to the current edition of the National Building code. This is the most comprehensive, easy-to-use reference book for the construction of wood-frame houses. Canadian Wood-Frame House Construction features illustrations tables, plan ahead notes, healthy housing insights to minimize and protect occupants and environment.
Download or read book Healthy House Building written by John Bower and published by Australian Geographic. This book was released on 1993 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dictionary of Architecture and Building Construction written by Nikolas Davies and published by Routledge. This book was released on 2008 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: With more than 20,000 words and terms individually defined, the Dictionary offers huge coverage for anyone studying or working in architecture, construction or any of the built environment fields. The innovative and detailed cross-referencing system allows readers to track down elusive definitions from general subject headings. Starting from only the vaguest idea of the word required, a reader can quickly track down precisely the term they are looking for. The book is illustrated with stunning drawings that provide a visual as well as a textual definition of both key concepts and subtle differences in meaning. Davies and Jokiniemi's work sets a new standard for reference books for all those interested in the buildings that surround us. To browse the book and to see how this title is an invaluable resource for both students and professionals alike, visit www.architectsdictionary.com.
Download or read book Engineering and Economic Analysis of Waste to Energy Systems written by E. Milton Wilson and published by . This book was released on 1978 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Efficiency in Domestic Appliances and Lighting written by Paolo Bertoldi and published by Springer. This book was released on 2023-05-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains peer-reviewed papers presented at the 10th International Conference on Energy Efficiency in Domestic Appliances and Lighting (EEDAL'19), held in Jinan, China from 6-8 November 2019. Energy efficiency helps to mitigate CO2 emissions and at the same time increases the security of energy supply. Energy efficiency is recognized as the cleanest, quickest and cheapest energy source. Not only this, but energy efficiency brings several additional benefits for society and end-users, such as lower energy costs, reduced local pollution, better outdoor and indoor air quality, etc. However, in some sectors, such as the residential sector, barriers to investments in energy efficiency remain. Legislation adopted in several jurisdictions (EU, Japan, USA, China, India, Australia, Brazil, etc.) helps in removing barriers and fosters investments in energy efficiency. These initiatives complement innovative financing schemes for energy efficiency, the provision of energy services by energy service companies and different types of information programs. At the same time, progress in appliance technologies and in solid state lighting offer high levels of efficiency. LED lighting is an example. As with previous conferences in this series, EEDAL’19 provided a unique forum to discuss and debate the latest developments in energy and environmental impact of households, including appliances, lighting, heating and cooling equipment, electronics, smart meters, consumer behavior, and policies and programs. EEDAL addressed non-technical issues such as consumer behavior, energy access in developing countries, and demand response.
