Download or read book Track Geotechnology and Substructure Management written by Ernest Theodore Selig and published by Thomas Telford. This book was released on 1994-10-05 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive study provides practical advice and guidance on the important topics of rail transport and ground engineering, the use of which will result in optimum quality with the minimum maintenance effort and the most economical use of resources. The authors have synthesized all of their international knowledge and experience in this field, and produced, for the first time, a definitive guide for the design, construction, maintenance and renewal of railway track as they relate to geotechnology.
Download or read book Advanced Rail Geotechnology Ballasted Track written by Buddhima Indraratna and published by CRC Press. This book was released on 2023-08-14 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ballast plays a vital role in transmitting and distributing the train wheel loads to the underlying track substructure. The load-bearing capacity, safe train speed, and the levels of noise and vibration, as well as passenger comfort depend on the behaviour of ballast through particle interlocking and the corresponding deformation of this granular assembly. Attrition and breakage of ballast occur progressively under heavy and continual cyclic loading, causing track deterioration and rail misalignment affecting safety, while exacerbating the intensity of track maintenance. In the absence of realistic computational models, the track substructure is traditionally designed using mostly empirical approaches. In this book, the authors present the detailed information on the strength, deformation, and degradation aspects of fresh and recycled ballast under monotonic, cyclic, and impact loading using innovative geotechnical testing devices. A constitutive model for ballast incorporating particle breakage is presented representing a more realistic stress–strain response. The mathematical formulations and numerical models are validated using controlled experimental simulations and fully instrumented field trials. Revised ballast gradation is described to provide greater track resiliency and extended longevity. The book also provides a detailed description of geosynthetics for substructure improvement considering track deterioration caused by particle degradation, fouling, and impeded drainage. New to this second edition are extensive discussions on subgrade soil stabilisation, causes and mechanisms of soil fluidisation (mud pumping) under cyclic loading, and preventive and remedial measures to alleviate undue instability of ballast tracks. This book should prove most beneficial for final-year civil engineering students and for postgraduate teaching and learning. It is an ideal supplement for practising railway engineers and researchers engaged in the challenging tasks of future track design for heavier and faster trains.
Download or read book Railway Geotechnics written by Dingqing Li and published by CRC Press. This book was released on 2015-09-17 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Links Geotechnics with Railway Track Engineering and Railway Operation Good railway track and railway operations depend on good geotechnics, in several different ways and at varying levels. Railway Geotechnics covers track, track substructure, load environment, materials, mechanics, design, construction, measurements, and management. Illustrated by
Download or read book Geotechnics for Transportation Infrastructure written by Ravi Sundaram and published by Springer. This book was released on 2019-05-30 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the International Symposium on Geotechnics for Transportation Infrastructure (ISGTI 2018). The research papers cover geotechnical interventions for the diverse fields of policy formulation, design, implementation, operation and management of the different modes of travel, namely road, air, rail and waterways. This book will be of interest to academic and industry researchers working in transportation geotechnics, as also to practicing engineers, policy makers, and civil agencies.
Download or read book Proceedings of GeoShanghai 2018 International Conference Transportation Geotechnics and Pavement Engineering written by Xianming Shi and published by Springer. This book was released on 2018-05-03 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the fourth volume of the proceedings of the 4th GeoShanghai International Conference that was held on May 27 - 30, 2018. This volume, entitled “Transportation Geotechnics and Pavement Engineering”, represents the recent advances and technologies in transportation geotechnics and pavement engineering. This book covers a wide range of topics, from transportation geotechnics, to geomechanics at various length scales, to pavement materials and structures. The book offers a unique mix of numerical modeling studies, experimental studies, and case studies from industry. It may be of interest to researchers and practitioners in the fields of transportation engineering and pavement engineering. Each of the papers included in this book received at least two positive peer reviews. The editors would like to express their sincerest appreciation to all of the anonymous reviewers all over the world, for their diligent work.
Download or read book Advances in Transportation Geotechnics IV written by Erol Tutumluer and published by Springer Nature. This book was released on 2021-09-05 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents selected papers presented during the 4th International Conference on Transportation Geotechnics. The papers address the geotechnical challenges in design, construction, maintenance, monitoring, and upgrading of roads, railways, airfields, and harbor facilities and other ground transportation infrastructure with the goal of providing safe, economic, environmental, reliable and sustainable infrastructures. This volume will be of interest to postgraduate students, academics, researchers, and consultants working in the field of civil and transport infrastructure.
Download or read book Geotechnical Engineering Handbook written by Braja M. Das and published by J. Ross Publishing. This book was released on 2011 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Geotechnical Engineering Handbook brings together essential information related to the evaluation of engineering properties of soils, design of foundations such as spread footings, mat foundations, piles, and drilled shafts, and fundamental principles of analyzing the stability of slopes and embankments, retaining walls, and other earth-retaining structures. The Handbook also covers soil dynamics and foundation vibration to analyze the behavior of foundations subjected to cyclic vertical, sliding and rocking excitations and topics addressed in some detail include: environmental geotechnology and foundations for railroad beds.
Download or read book Numerical Methods in Geotechnical Engineering IX written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-19 with total page 1656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering.
Download or read book Numerical Methods in Geotechnical Engineering IX Volume 2 written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-27 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering. This is volume 2 of the NUMGE 2018 set.
Download or read book Ground Improvement Case Histories written by Buddhima Indraratna and published by Butterworth-Heinemann. This book was released on 2015-06-16 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of contributors, Ground Improvement Case Histories: Compaction, Grouting and Geosynthetics provides over 700 pages of international case-histories. Each case-history provides an overview of the specific technology followed by applications, with some cases offering a comprehensive back-analysis through numerical modelling. Specific case-histories include: The Use of Alternative and Improved Construction Materials and Geosynthetics in Pavements, Case Histories of Embankments on Soft Soils and Stabilisation with Geosynthetics, Ground Improvement with Geotextile Reinforcements, Use of Geosynthetics to aid Construction over Soft Soils and Soil Improvement and Foundation Systems with Encased Columns and Reinforced Bearing Layers. Comprehensive analysis methods using numerical modelling methods Features over 700 pages of contributor generated case-histories from all over the world Offers field data and clear observations based on the practical aspects of the construction procedures and treatment effectiveness
Download or read book Computational and Experimental Simulations in Engineering written by Honghua Dai and published by Springer Nature. This book was released on 2022-08-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of computational engineering, as presented by leading international researchers and engineers at the 27th International Conference on Computational & Experimental Engineering and Sciences (ICCES), held online on January 8-12, 2022. ICCES covers all aspects of applied sciences and engineering: theoretical, analytical, computational, and experimental studies and solutions of problems in the physical, chemical, biological, mechanical, electrical, and mathematical sciences. As such, the book discusses highly diverse topics, including composites; bioengineering & biomechanics; geotechnical engineering; offshore & arctic engineering; multi-scale & multi-physics fluid engineering; structural integrity & longevity; materials design & simulation; and computer modeling methods in engineering. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.
Download or read book Proceedings of the 7th Indian Young Geotechnical Engineers Conference written by Ashim Kanti Dey and published by Springer Nature. This book was released on 2022-03-16 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select peer-reviewed papers presented at the 7th Indian Young Geotechnical Engineers Conference (7IYGEC 2019) held at the National Institute of Technology, Silchar. It covers recent research developments in geotechnical engineering particularly in the fields of shallow and deep foundations, rock mechanics, ground improvement techniques, geotechnical earthquake engineering, and characterization of soil. The book also discusses several computational techniques to model behavior of soil which can be useful for future research. A special emphasis is given on geo-environmental engineering for making the world cleaner and safer to live. Given the contents, the book will be beneficial for students, researchers, and professionals working in geotechnical engineering and allied areas.
Download or read book Physical Modelling in Geotechnics Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 1455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Download or read book From Fundamentals to Applications in Geotechnics written by D. Manzanal and published by IOS Press. This book was released on 2015-12-11 with total page 3344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work of geotechnical engineers contributes to the creation of safe, economic and pleasant spaces to live, work and relax all over the world. Advances are constantly being made, and the expertise of the profession becomes ever more important with the increased pressure on space and resources. This book presents the proceedings of the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), held in Buenos Aires, Argentina, in November 2015. This conference, held every four years, is an important opportunity for international experts, researchers, academics, professionals and geo-engineering companies to meet and exchange ideas and research findings in the areas of soil mechanics, rock mechanics, and their applications in civil, mining and environmental engineering. The articles are divided into nine sections: transportation geotechnics; in-situ testing; geo-engineering for energy and sustainability; numerical modeling in geotechnics; foundations and ground improvement; unsaturated soil behavior; embankments, dams and tailings; excavations and tunnels; and geo-risks, and cover a wide spectrum of issues from fundamentals to applications in geotechnics. This book will undoubtedly represent an essential reference for academics, researchers and practitioners in the field of soil mechanics and geotechnical engineering. In this proceedings, approximately 65% of the contributions are in English, and 35% of the contributions are in Spanish or Portuguese.
Download or read book Geomechanics and Geotechnics of Particulate Media written by Masayuki Hyodo and published by CRC Press. This book was released on 2017-12-14 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microscopic re-examination of geomaterials consisting of aggregates can shed light on macroscopic behaviour, including compressibility, anisotropy, yielding, creep, cyclic liquefaction and shear rupture. As a result of this process of examination, new methods of material characterization emerge, leading to a greater degree of accuracy in the specification of new constitutive models with physically-meaningful parameters. The impetus behind this development is an increasing awareness on sustainability, leading to the more efficient use of recycled materials for geotechnical applications. The characteristics of recycled materials, such as compressibility and self-hardening, may differ significantly from those of natural materials, and it is crucial that evaluation is made from a specifically particulate perspective.
Download or read book Railway Geotechnics written by Dingqing Li and published by CRC Press. This book was released on 2019-12-12 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Links Geotechnics with Railway Track Engineering and Railway Operation Good railway track and railway operations depend on good geotechnics, in several different ways and at varying levels. Railway Geotechnics covers track, track substructure, load environment, materials, mechanics, design, construction, measurements, and management. Illustrated by case studies, with an emphasis on the geotechnical aspects of railway engineering, it discusses these topics from a historical perspective. It also presents the methodologies and best practices developed over the past 20 years. Written by Four Experienced Professionals This book: Emphasizes the practical aspects and best practices for railway track and substructure Contains guidelines for design, construction, and maintenance of railway track and substructure Provides many examples and case studies Railway Geotechnics is written primarily for professionals and graduate students, and begins with the fundamentals and basic principles, leading in to practical applications. The authors bring considerable experience and expertise, with many years of research and development, academia, railway operations, and consulting.
Download or read book Challenges and Innovations in Geomechanics written by Marco Barla and published by Springer Nature. This book was released on 2021-01-14 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of computational geomechanics, as presented by international researchers and engineers at the 16th International Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG 2020/21). Contributions include a wide range of topics in geomechanics such as: monitoring and remote sensing, multiphase modelling, reliability and risk analysis, surface structures, deep structures, dams and earth structures, coastal engineering, mining engineering, earthquake and dynamics, soil-atmosphere interaction, ice mechanics, landfills and waste disposal, gas and petroleum engineering, geothermal energy, offshore technology, energy geostructures, geomechanical numerical models and computational rail geotechnics.
