Download or read book Towards the Automatization of Cranial Implant Design in Cranioplasty written by Jianning Li and published by Springer Nature. This book was released on 2020-12-04 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the First Automatization of Cranial Implant Design in Cranioplasty Challenge, AutoImplant 2020, which was held in conjunction with the 23rd International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2020, in Lima, Peru, in October 2020. The challenge took place virtually due to the COVID-19 pandemic. The 10 papers presented together with one invited paper and a dataset descriptor in this volume were carefully reviewed and selected form numerous submissions. This challenge aims to provide more affordable, faster, and more patient-friendly solutions to the design and manufacturing of medical implants, including cranial implants, which is needed in order to repair a defective skull from a brain tumor surgery or trauma. The presented solutions can serve as a good benchmark for future publications regarding 3D volumetric shape learning and cranial implant design.
Download or read book Towards the Automatization of Cranial Implant Design in Cranioplasty II written by Jianning Li and published by Springer Nature. This book was released on 2021-12-02 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the Second Automatization of Cranial Implant Design in Cranioplasty Challenge, AutoImplant 2021, which was held in conjunction with the 24th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2021, in Strasbourg, France, in September, 2021. The challenge took place virtually due to the COVID-19 pandemic. The 7 papers are presented together with one invited paper, one qualitative evaluation criteria from neurosurgeons and a dataset descriptor. This challenge aims to provide more affordable, faster, and more patient-friendly solutions to the design and manufacturing of medical implants, including cranial implants, which is needed in order to repair a defective skull from a brain tumor surgery or trauma. The presented solutions can serve as a good benchmark for future publications regarding 3D volumetric shape learning and cranial implant design.
Download or read book Towards the Automatization of Cranial Implant Design in Cranioplasty II written by Jianning Li and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the Second Automatization of Cranial Implant Design in Cranioplasty Challenge, AutoImplant 2021, which was held in conjunction with the 24th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2021, in Strasbourg, France, in September, 2021. The challenge took place virtually due to the COVID-19 pandemic. The 7 papers are presented together with one invited paper, one qualitative evaluation criteria from neurosurgeons and a dataset descriptor. This challenge aims to provide more affordable, faster, and more patient-friendly solutions to the design and manufacturing of medical implants, including cranial implants, which is needed in order to repair a defective skull from a brain tumor surgery or trauma. The presented solutions can serve as a good benchmark for future publications regarding 3D volumetric shape learning and cranial implant design.
Download or read book Medical Modelling written by Richard Bibb and published by Woodhead Publishing. This book was released on 2014-12-13 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical modelling and the principles of medical imaging, Computer Aided Design (CAD) and Rapid Prototyping (also known as Additive Manufacturing and 3D Printing) are important techniques relating to various disciplines - from biomaterials engineering to surgery. Building on the success of the first edition, Medical Modelling: The application of Advanced Design and Rapid Prototyping techniques in medicine provides readers with a revised edition of the original text, along with key information on innovative imaging techniques, Rapid Prototyping technologies and case studies.Following an overview of medical imaging for Rapid Prototyping, the book goes on to discuss working with medical scan data and techniques for Rapid Prototyping. In this second edition there is an extensive section of peer-reviewed case studies, describing the practical applications of advanced design technologies in surgical, prosthetic, orthotic, dental and research applications. - Covers the steps towards rapid prototyping, from conception (modelling) to manufacture (manufacture) - Includes a comprehensive case studies section on the practical application of computer-aided design (CAD) and rapid prototyping (RP) - Provides an insight into medical imaging for rapid prototyping and working with medical scan data
Download or read book 3D Printing in Medicine written by Frank J. Rybicki and published by Springer. This book was released on 2017-09-27 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of three-dimensional (3D) printing, addresses the practical aspects of establishing a 3D printing service in a medical facility, and explains the enormous potential value of rendering images as 3D printed models capable of providing tactile feedback and tangible information on both anatomic and pathologic states. Individual chapters also focus on selected areas of applications for 3D printing, including musculoskeletal, craniomaxillofacial, cardiovascular, and neurosurgery applications. Challenges and opportunities related to training, materials and equipment, and guidelines are addressed, and the overall costs of a 3D printing lab and the balancing of these costs against clinical benefits are discussed. Radiologists, surgeons, and other physicians will find this book to be a rich source of information on the practicalities and expanding medical applications of 3D printing.
Download or read book Multimodal Learning for Clinical Decision Support and Clinical Image Based Procedures written by Tanveer Syeda-Mahmood and published by Springer Nature. This book was released on 2020-10-03 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed joint proceedings of the 10th International Workshop on Multimodal Learning for Clinical Decision Support, ML-CDS 2020, and the 9th International Workshop on Clinical Image-Based Procedures, CLIP 2020, held in conjunction with the 23rd International Conference on Medical Imaging and Computer-Assisted Intervention, MICCAI 2020, in Lima, Peru, in October 2020. The workshops were held virtually due to the COVID-19 pandemic. The 4 full papers presented at ML-CDS 2020 and the 9 full papers presented at CLIP 2020 were carefully reviewed and selected from numerous submissions to ML-CDS and 10 submissions to CLIP. The ML-CDS papers discuss machine learning on multimodal data sets for clinical decision support and treatment planning. The CLIP workshops provides a forum for work centered on specific clinical applications, including techniques and procedures based on comprehensive clinical image and other data.
Download or read book The Glossary of Prosthodontic Terms written by and published by . This book was released on 1994 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Knowledge in Information Systems and Technologies written by Álvaro Rocha and published by Springer. This book was released on 2019-03-29 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes a selection of articles from The 2019 World Conference on Information Systems and Technologies (WorldCIST’19), held from April 16 to 19, at La Toja, Spain. WorldCIST is a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges in modern information systems and technologies research, together with their technological development and applications. The book covers a number of topics, including A) Information and Knowledge Management; B) Organizational Models and Information Systems; C) Software and Systems Modeling; D) Software Systems, Architectures, Applications and Tools; E) Multimedia Systems and Applications; F) Computer Networks, Mobility and Pervasive Systems; G) Intelligent and Decision Support Systems; H) Big Data Analytics and Applications; I) Human–Computer Interaction; J) Ethics, Computers & Security; K) Health Informatics; L) Information Technologies in Education; M) Information Technologies in Radiocommunications; and N) Technologies for Biomedical Applications.
Download or read book Medical Image Computing and Computer Assisted Intervention MICCAI 2020 written by Anne L. Martel and published by Springer Nature. This book was released on 2020-10-02 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seven-volume set LNCS 12261, 12262, 12263, 12264, 12265, 12266, and 12267 constitutes the refereed proceedings of the 23rd International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2020, held in Lima, Peru, in October 2020. The conference was held virtually due to the COVID-19 pandemic. The 542 revised full papers presented were carefully reviewed and selected from 1809 submissions in a double-blind review process. The papers are organized in the following topical sections: Part I: machine learning methodologies Part II: image reconstruction; prediction and diagnosis; cross-domain methods and reconstruction; domain adaptation; machine learning applications; generative adversarial networks Part III: CAI applications; image registration; instrumentation and surgical phase detection; navigation and visualization; ultrasound imaging; video image analysis Part IV: segmentation; shape models and landmark detection Part V: biological, optical, microscopic imaging; cell segmentation and stain normalization; histopathology image analysis; opthalmology Part VI: angiography and vessel analysis; breast imaging; colonoscopy; dermatology; fetal imaging; heart and lung imaging; musculoskeletal imaging Part VI: brain development and atlases; DWI and tractography; functional brain networks; neuroimaging; positron emission tomography
Download or read book Advances in Lightweight Materials and Structures written by A. Praveen Kumar and published by Springer Nature. This book was released on 2020-10-13 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Advanced Lightweight Materials and Structures (ICALMS) 2020, and discusses the triad of processing, structure, and various properties of lightweight materials. It provides a well-balanced insight into materials science and mechanics of both synthetic and natural composites. The book includes topics such as nano composites for lightweight structures, impact and failure of structures, biomechanics and biomedical engineering, nanotechnology and micro-engineering, tool design and manufacture for producing lightweight components, joining techniques for lightweight structures for similar and dissimilar materials, design for manufacturing, reliability and safety, robotics, automation and control, fatigue and fracture mechanics, and friction stir welding in lightweight sandwich structures. The book also discusses latest research in composite materials and their applications in the field of aerospace, construction, wind energy, automotive, electronics and so on. Given the range of topics covered, this book can be a useful resource for beginners, researchers and professionals interested in the wide ranging applications of lightweight structures.
Download or read book 3D Printing and Biofabrication written by Aleksandr Ovsianikov and published by Springer. This book was released on 2018-06-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an in-depth introduction to 3D printing and biofabrication and covers the recent advances in additive manufacturing for tissue engineering. The book is divided into two parts, the first part on 3D printing discusses conventional approaches in additive manufacturing aimed at fabrication of structures, which are seeded with cells in a subsequent step. The second part on biofabrication presents processes which integrate living cells into the fabrication process.
Download or read book Digitization in Dentistry written by Priyanka Jain and published by Springer Nature. This book was released on 2021-03-22 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides evidence-based guidance on the clinical applications of digital dentistry, that is, the use of dental technologies or devices that incorporate digital or computer-controlled components for the performance of dental procedures. Readers will find practically oriented information on the digital procedures currently in use in various fields of dental practice, including, for example, diagnosis and treatment planning, oral radiography, endodontics, orthodontics, implant dentistry, and esthetic dentistry. The aim is to equip practitioners with the knowledge required in order to enhance their daily practice. To this end, a problem-solving approach is adopted, with emphasis on key concepts and presentation of details in a sequential and easy to follow manner. Clear recommendations are set out, and helpful tips and tricks are highlighted. The book is written in a very readable style and is richly illustrated. Whenever appropriate, information is presented in tabular form to provide a ready overview of answers to frequent doubts and questions.
Download or read book Biodegradable Polyesters written by Stoyko Fakirov and published by John Wiley & Sons. This book was released on 2015-04-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collating otherwise hard-to-get and recently acquired knowledge in one work, this is a comprehensive reference on the synthesis, properties, characterization, and applications of this eco-friendly class of plastics. A group of internationally renowned researchers offer their first-hand experience and knowledge, dealing exclusively with those biodegradable polyesters that have become increasingly important over the past two decades due to environmental concerns on the one hand and newly-devised applications in the biomedical field on the other. The result is an unparalleled overview for the industrial chemist and materials scientist, as well as for developers and researchers in industry and academia alike.
Download or read book Digital Technologies in Craniomaxillofacial Surgery written by Alex M. Greenberg and published by Springer. This book was released on 2018-06-13 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital technologies are changing the way that surgeons operate. They are revolutionizing the ability of surgeons to visualize, plan, and create rapid prototyped models and patient- specific implants for the broad disciplines of ENT, plastic, oral and maxillofacial surgeons. This book provides information on the latest digital technologies available for craniomaxillofacial surgery, discussing how this technology allows for preplanned procedures with improved and superior outcomes. Rather than improvise during surgery, surgery and its procedures can be preconceptualized with superior outcomes and decreased patient morbidity.
Download or read book Biomaterials Science and Implants written by Bikramjit Basu and published by Springer Nature. This book was released on 2020-10-22 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials as a research theme is highly socially relevant with impactful applications in human healthcare. In this context, this book provides a state-of-the-art perspective on biomaterials research in India and globally. It presents a sketch of the Indian landscape against the backdrop of the international developments in biomaterials research. Furthermore, this book presents highlights from major global institutes of importance, and challenges and recommendations for bringing inventions from the bench to the bedside. It also presents valuable information to those interested in existing issues pertaining to developing the biomaterials research ecosystem in developing countries. The contents also serve to inspire and educate young researchers and students to take up research challenges in the areas of biomaterials, biomedical implants, and regenerative medicine. With key recommendations for developing frontier research and policy, it also speaks to science administrators, policymakers, industry experts, and entrepreneurs on helping shape the future of biomaterials research and development.
Download or read book Reverse Engineering written by Vinesh Raja and published by Springer Science & Business Media. This book was released on 2007-10-24 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited collection of essays from world-leading academic and industrial authors yields insight into all aspects of reverse engineering. Methods of reverse engineering analysis are covered, along with special emphasis on the investigation of surface and internal structures. Frequently-used hardware and software are assessed and advice given on the most suitable choice of system. Also covered is rapid prototyping and its relationship with successful reverse engineering.
Download or read book Biomanufacturing written by Chander Prakash and published by Springer. This book was released on 2019-03-20 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Trends in Biomanufacturing focuses on cutting-edge research regarding the design, fabrication, assembly, and measurement of bio-elements into structures, devices, and systems. The field of biomaterial and biomanufacturing is growing exponentially in order to meet the increasing demands of for artificial joints, organs and bone-fixation devices. Rapid advances in the biological sciences and engineering are leading to newer and viable resources, methods and techniques that may providing better quality of life and more affordable health care services. The book covers the broad aspects of biomanufacturing, including: synthesis of biomaterials; implant coating techniques; spark plasma sintering; microwave processing; and cladding, powder metallurgy and electrospinning. The contributors illustrate the recent trends of biomanufacturing, highlighting the important aspects of biomaterial synthesis, and their use as feedstock of fabrication technologies and their characterization, along with their clinical practices. Current Trends in Biomanufacturing updates researchers and scientists the novelties and techniques of the field, as it summarises numerous aspects of biomanufacturing, including synthesis of biomaterials, fabrication of biomedical structures, their in-vivo/ in-vitro, mechanical analysis and associated ISO standards.
