Download or read book Towards Process Safety 4 0 in the Factory of the Future written by André Laurent and published by John Wiley & Sons. This book was released on 2023-07-12 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid development of new technologies in the industry of the future implies a major evolution in the industrial safety measures needed to be met, such as societal requirements. Towards Process Safety 4.0 in the Factory of the Future presents the concept of Safety 4.0 from the point of view of process safety, occupational safety and health, as well as systems’ cyber security. Numerous examples illustrate the different approaches of the identified methods and techniques of Safety 4.0. Their concepts, paradigms, structural bases, couplings, complexities and flaws are systematically analyzed. This comprehensive approach to Safety 4.0 is aimed at the wide variety of actors working in the industry of the future.

Download or read book Towards Process Safety 4 0 in the Factory of the Future written by André Laurent and published by John Wiley & Sons. This book was released on 2023-08-15 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid development of new technologies in the industry of the future implies a major evolution in the industrial safety measures needed to be met, such as societal requirements. Towards Process Safety 4.0 in the Factory of the Future presents the concept of Safety 4.0 from the point of view of process safety, occupational safety and health, as well as systems’ cyber security. Numerous examples illustrate the different approaches of the identified methods and techniques of Safety 4.0. Their concepts, paradigms, structural bases, couplings, complexities and flaws are systematically analyzed. This comprehensive approach to Safety 4.0 is aimed at the wide variety of actors working in the industry of the future.

Download or read book Sustainable Manufacturing for Industry 4 0 written by K. Jayakrishna and published by CRC Press. This book was released on 2020-10-18 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industry 4.0 promises tremendous opportunities for industries to go green by leveraging virtual physical systems and internet driven technologies for a competitive advantage and set the platform for the factory of the future and smart manufacturing. The book provides measures that can be adopted by practicing design engineers, to develop products that will be sustainable in all stages of its life cycle. It helps organizations in implementation of sustainable manufacturing practices and formulation of critical strategies in their transition towards Industry 4.0., and the book will provide insights on ways of deploying these practices in correlation with the environmental benefits mapped to support the practicing managers and stakeholders. Features Assists in the understanding of the shifting paradigm in manufacturing sector towards smart and sustainable practices Showcases contemporary technologies and their insurgence in existing industries Focuses on need, applications, and implementation framework for Industry 4.0 Encapsulates all that one has to learn about sustainability and its transformation in Industry 4.0 Real time case studies are presented

Download or read book Methods to Assess and Manage Process Safety in Digitalized Process System written by Faisal Khan and published by Academic Press. This book was released on 2022-07-06 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods to Assess and Manage Process Safety in Digitalized Process System, Volume Six, the latest release in the Methods in Chemical Process Safety series, highlights new advances in the field, with this new volume presenting interesting chapters written by an international board of authors. Provides the authority and expertise of leading contributors from an international board of authors Presents the latest release in the Methods in Chemical Process Safety series Provides the authority and expertise of leading contributors from an international board of authors

Download or read book Safety Assessment for Chemical Processes written by Jörg Steinbach and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of the good safety records of chemical plants many people regard chemical production as dangerous because of a few major accidents that have occurred. A knowledge of at least the fundamentals of chemical safety technology is indispensable for chemists and engineers working in chemical industry. The increasingly stringent legal and administrative requirements can only be answered by more highly qualified employees. This book combines the author's experience of 15 years of research in the field of chemical safety and 10 years in the chemical industry. It provides newcomers with an easy access to the field and helps practitioners in the chemical industry to answer all questions concerning their daily work with hazardous materials or potentially dangerous chemical plants. The investigation of risks, and preventive measures to be taken to minimize the probability of an accident, as well as its consequences are explained.

Download or read book Sustainable Manufacturing in Industry 4 0 written by Hamed Gholami and published by Springer Nature. This book was released on 2023-01-04 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of the latest technologies in the Industry 4.0, using smart and autonomous systems driven by data and machine learning, to develop a sustainable approach to manufacturing. It includes the implementation of smart technological approaches in different manufacturing processes such as laser welding, additive manufacturing, equipment maintenance and inspection, automotive manufacturing, poultry processing, supply chain management, value stream mapping and development. This book caters to research experts and practitioners who are keen to realize the benefits of industry 4.0 to transform the manufacturing sector into a more sustainable-based state.

Download or read book INDUSTRY 4 0 written by Dr. Anand Kumar Singh and published by Shashwat Publication. This book was released on 2022-04-25 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is based on the syllabus of Industry 4.0 for the pre-final year engineering students of all disciplines of Gujarat Technological University, Gujarat. The first industrial revolution came with the advent of mechanisation, steam power, and water power, which the human learn then after followed by the second industrial revolution, which revolved around mass production and assembly lines using electricity. The third industrial revolution came with electronics, I.T. systems, and automation, which led to the fourth industrial revolution that is associated with cyber-physical systems. Generally speaking, Industry 4.0 describes the growing trend towards automation and data exchange in technology and processes within the manufacturing industry, including Internet of Thing (IoT), Industrial Internet of Things (IIoT), Cyber-physical systems (CPS), Smart manufacture, Smart factories, Cloud computing, Cognitive computing, Artificial Intelligence (AI) This automation creates a manufacturing system whereby machines in factories are augmented with wireless connectivity and sensors to monitor and visualise an entire production process and make autonomous decisions. The fourth industrial revolution also relates to digital twin technologies. These digital technologies can create virtual versions of real-world installations, processes, and applications. These can then be robustly tested to make cost-effective decentralised decisions. Industry 4.0 has already been demonstrated through business models such as offline programming and adaptive control for arc welding, taking the process from product design through simulation and onto the shop floor for production.

Download or read book Risk Analysis and Control for Industrial Processes Gas Oil and Chemicals written by Hans J Pasman and published by Butterworth-Heinemann. This book was released on 2015-06-14 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk Analysis and Control for Industrial Processes - Gas, Oil and Chemicals provides an analysis of current approaches for preventing disasters, and gives readers an overview on which methods to adopt. The book covers safety regulations, history and trends, industrial disasters, safety problems, safety tools, and capital and operational costs versus the benefits of safety, all supporting project decision processes. Tools covered include present day array of risk assessment, tools including HAZOP, LOPA and ORA, but also new approaches such as System-Theoretic Process Analysis (STPA), Blended HAZID, applications of Bayesian data analytics, Bayesian networks, and others. The text is supported by valuable examples to help the reader achieve a greater understanding on how to perform safety analysis, identify potential issues, and predict the likelihood they may appear. Presents new methods on how to identify hazards of low probability/high consequence events Contains information on how to develop and install safeguards against such events, with guidance on how to quantify risk and its uncertainty, and how to make economic and societal decisions about risk Demonstrates key concepts through the use of examples and relevant case studies

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1986 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Springer Handbook of Automation written by Shimon Y. Nof and published by Springer Nature. This book was released on 2023-06-16 with total page 1533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook incorporates new developments in automation. It also presents a widespread and well-structured conglomeration of new emerging application areas, such as medical systems and health, transportation, security and maintenance, service, construction and retail as well as production or logistics. The handbook is not only an ideal resource for automation experts but also for people new to this expanding field.

Download or read book Managing Projects with Smart Technologies written by Bon-Gang Hwang and published by Taylor & Francis. This book was released on 2024-04-23 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on project managers (PMs) in the construction industry, this book addresses the impact of smart technology applications on project management and examines how technologically competent PMs can be developed for successfully managing and delivering projects with smart technologies. The book assesses the changes to the knowledge and skillsets required to manage projects with smart technologies; develops a Technological Competency Framework to improve PM competency when managing projects with smart technologies; and develops a Knowledge-Based Technological Competency Analytics and Innovations System to assess and improve the technological competency of PMs and provide recommendations to improve their competency. Managing Projects with Smart Technologies is ideal for PMs and academics in the areas of construction project management, engineering, architecture, and infrastructure and anyone involved in the technical training of professionals in these areas.

Download or read book Handbook of Manufacturing Engineering Second Edition 4 Volume Set written by Richard Crowson and published by CRC Press. This book was released on 1996-07-17 with total page 1142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides single-source coverage on the full range of activities that meet the manufacturing engineering process, including management, product and process design, tooling, equipment selection, faciltiy planning and layout, plant contruction, materials handling and storage, method analysis, time standards, and production control. The text examines every topic involved with product and factory development, parts fabrication, and assembly processes.

Download or read book Manufacturing Systems and Technologies for the New Frontier written by Mamoru Mitsuishi and published by Springer Science & Business Media. This book was released on 2008-05-14 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collected here are 112 papers concerned with all manner of new directions in manufacturing systems given at the 41st CIRP Conference on Manufacturing Systems. The high-quality material presented in this volume includes reports of work from both scientific and engineering standpoints and several invited and keynote papers addressing the current cutting edge and likely future trends in manufacturing systems. The book’s subjects include: (1) new trends in manufacturing systems design: sustainable design, ubiquitous manufacturing, emergent synthesis, service engineering, value creation, cost engineering, human and social aspects of manufacturing, etc.; (2) new applications for manufacturing systems – medical, life-science, optics, NEMS, etc.; (3) intelligent use of advanced methods and new materials – new manufacturing process technologies, high-hardness materials, bio-medical materials, etc.; (4) integration and control for new machines – compound machine tools, rapid prototyping, printing process integration, etc.

Download or read book New Trends in Mechanism and Machine Science Theory and Applications in Engineering Mechanisms and Machine Science written by Fernando Viadero and published by Springer Nature. This book was released on 2013 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital Transformation in Industry written by Vikas Kumar and published by Springer Nature. This book was released on 2021-07-26 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a selection of the best papers presented at the international scientific conference "Digital Transformation in Industry: Trends, Management, Strategies", held by the Institute of Economics of the Ural Branch of the Russian Academy of Sciences, Russia in November 2020. The main focus of the book is to evaluate trends and perspectives of digital transformation in industry and industrial markets through the dissemination of Industry 4.0. The aim of the topics discussed is to create an idea of introduction mechanisms for digitization processes and to specify successful strategies of digital transformation in all sectors of industrial enterprises. The experience of developed and developing economies, as well as small and large enterprises implementing IT and other technological innovations are included. Students as well as managers of industrial organizations alike can benefit from the results of the topics covered.

Download or read book Advanced Human Robot Collaboration in Manufacturing written by Lihui Wang and published by Springer Nature. This book was released on 2021-06-10 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art research, challenges and solutions in the area of human–robot collaboration (HRC) in manufacturing. It enables readers to better understand the dynamic behaviour of manufacturing processes, and gives more insight into on-demand adaptive control techniques for industrial robots. With increasing complexity and dynamism in today’s manufacturing practice, more precise, robust and practical approaches are needed to support real-time shop-floor operations. This book presents a collection of recent developments and innovations in this area, relying on a wide range of research efforts. The book is divided into five parts. The first part presents a broad-based review of the key areas of HRC, establishing a common ground of understanding in key aspects. Subsequent chapters focus on selected areas of HRC subject to intense recent interest. The second part discusses human safety within HRC. The third, fourth and fifth parts provide in-depth views of relevant methodologies and algorithms. Discussing dynamic planning and monitoring, adaptive control and multi-modal decision making, the latter parts facilitate a better understanding of HRC in real situations. The balance between scope and depth, and theory and applications, means this book appeals to a wide readership, including academic researchers, graduate students, practicing engineers, and those within a variety of roles in manufacturing sectors.

Download or read book Human Automation Interaction written by Vincent G. Duffy and published by Springer Nature. This book was released on 2022-09-30 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practical guidance and awareness for a growing body of knowledge developing across a variety of disciplines and many countries. This book is a celebration of the Gavriel Salvendy International Symposium (GSIS) and provides a survey of topics and emerging areas of interest in human–automation interaction. This book for the GSIS emphasizes main thematic areas: manufacturing, services and user experience. Main areas of coverage include Section A: Advanced Production Management and Production Control; Section B: Healthcare Automation; Section C: Measuring and Modeling Human Performance; Section D: Usability and User Experience; Section E: Safety Management and Occupational Ergonomics; Section F: Manufacturing and Services; Section G: Data and Probabilistic Information; Section H: Training and Collaboration Technologies. Contributions from especially early career researchers were featured as part of this (virtual) symposium and celebration. Gavriel Salvendy initiated the conferences that run annually as Human–Computer Interaction International and Applied Human Factors and Ergonomics International (AHFE), both within the Lecture Notes in Springer. The book is inclusive of human–computer interaction and human factors and ergonomics principles, yet it is intended to serve a much wider audience that has interest in automation and human modeling. The emerging need for human–automation interaction expertise has developed from an ever-growing availability and presence of automation in our everyday lives.