Download or read book Towards a Common Software Hardware Methodology for Future Advanced Driver Assistance Systems written by Guillermo Payá-Vayá and published by CRC Press. This book was released on 2022-09-01 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European research project DESERVE (DEvelopment platform for Safe and Efficient dRiVE, 2012-2015) had the aim of designing and developing a platform tool to cope with the continuously increasing complexity and the simultaneous need to reduce cost for future embedded Advanced Driver Assistance Systems (ADAS). For this purpose, the DESERVE platform profits from cross-domain software reuse, standardization of automotive software component interfaces, and easy but safety-compliant integration of heterogeneous modules. This enables the development of a new generation of ADAS applications, which challengingly combine different functions, sensors, actuators, hardware platforms, and Human Machine Interfaces (HMI). This book presents the different results of the DESERVE project concerning the ADAS development platform, test case functions, and validation and evaluation of different approaches. The reader is invited to substantiate the content of this book with the deliverables published during the DESERVE project. Technical topics discussed in this book include:Modern ADAS development platforms;Design space exploration;Driving modelling;Video-based and Radar-based ADAS functions;HMI for ADAS;Vehicle-hardware-in-the-loop validation systems
Download or read book Big Data Analytics for Cyber Physical Systems written by Guido Dartmann and published by Elsevier. This book was released on 2019-07-16 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.374 pages
Download or read book 15th International Conference on Soft Computing Models in Industrial and Environmental Applications SOCO 2020 written by Álvaro Herrero and published by Springer Nature. This book was released on 2020-08-28 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains accepted papers presented at SOCO 2020 conference held in the beautiful and historic city of Burgos (Spain), in September 2020. Soft computing represents a collection or set of computational techniques in machine learning, computer science and some engineering disciplines, which investigate, simulate, and analyze very complex issues and phenomena. After a through peer-review process, the SOCO 2020 International Program Committee selected 83 papers which are published in these conference proceedings and represents an acceptance rate of 35%. Due to the COVID-19 outbreak, the SOCO 2020 edition was blended, combining on-site and on-line participation. In this relevant edition a special emphasis was put on the organization of special sessions. Eleven special session were organized related to relevant topics such as: Soft Computing Applications in Precision Agriculture, Manufacturing and Management Systems, Management of Industrial and Environmental Enterprises, Logistics and Transportation Systems, Robotics and Autonomous Vehicles, Computer Vision, Laser-Based Sensing and Measurement and other topics such as Forecasting Industrial Time Series, IoT, Big Data and Cyber Physical Systems, Non-linear Dynamical Systems and Fluid Dynamics, Modeling and Control systems The selection of papers was extremely rigorous in order to maintain the high quality of SOCO conference editions and we would like to thank the members of the Program Committees for their hard work in the reviewing process. This is a crucial process to the creation of a high standard conference and the SOCO conference would not exist without their help.
Download or read book Automotive Systems and Software Engineering written by Yanja Dajsuren and published by Springer. This book was released on 2019-07-17 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art, challenges and future trends in automotive software engineering. The amount of automotive software has grown from just a few lines of code in the 1970s to millions of lines in today’s cars. And this trend seems destined to continue in the years to come, considering all the innovations in electric/hybrid, autonomous, and connected cars. Yet there are also concerns related to onboard software, such as security, robustness, and trust. This book covers all essential aspects of the field. After a general introduction to the topic, it addresses automotive software development, automotive software reuse, E/E architectures and safety, C-ITS and security, and future trends. The specific topics discussed include requirements engineering for embedded software systems, tools and methods used in the automotive industry, software product lines, architectural frameworks, various related ISO standards, functional safety and safety cases, cooperative intelligent transportation systems, autonomous vehicles, and security and privacy issues. The intended audience includes researchers from academia who want to learn what the fundamental challenges are and how they are being tackled in the industry, and practitioners looking for cutting-edge academic findings. Although the book is not written as lecture notes, it can also be used in advanced master’s-level courses on software and system engineering. The book also includes a number of case studies that can be used for student projects.
Download or read book Handbook of Driver Assistance Systems written by Hermann Winner and published by Springer. This book was released on 2015-10-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fundamental work explains in detail systems for active safety and driver assistance, considering both their structure and their function. These include the well-known standard systems such as Anti-lock braking system (ABS), Electronic Stability Control (ESC) or Adaptive Cruise Control (ACC). But it includes also new systems for protecting collisions protection, for changing the lane, or for convenient parking. The book aims at giving a complete picture focusing on the entire system. First, it describes the components which are necessary for assistance systems, such as sensors, actuators, mechatronic subsystems, and control elements. Then, it explains key features for the user-friendly design of human-machine interfaces between driver and assistance system. Finally, important characteristic features of driver assistance systems for particular vehicles are presented: Systems for commercial vehicles and motorcycles.
Download or read book ADAS written by and published by . This book was released on 2001 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Systems Engineering written by Markus Maurer and published by Springer Science & Business Media. This book was released on 2013-05-22 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the shift in design paradigm in automobile industry. It presents future innovations, often referred as “automotive systems engineering”. These cause fundamental innovations in the field of driver assistance systems and electro-mobility as well as fundamental changes in the architecture of the vehicles. New driving functionalities can only be realized if the software programs of multiple electronic control units work together correctly. This volume presents the new and innovative methods which are mandatory to master the complexity of the vehicle of the future.
Download or read book IEEE International Symposium on Industrial Electronics Proceedings written by and published by . This book was released on 2004 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Autonomous Driving written by Markus Maurer and published by Springer. This book was released on 2016-05-21 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes a look at fully automated, autonomous vehicles and discusses many open questions: How can autonomous vehicles be integrated into the current transportation system with diverse users and human drivers? Where do automated vehicles fall under current legal frameworks? What risks are associated with automation and how will society respond to these risks? How will the marketplace react to automated vehicles and what changes may be necessary for companies? Experts from Germany and the United States define key societal, engineering, and mobility issues related to the automation of vehicles. They discuss the decisions programmers of automated vehicles must make to enable vehicles to perceive their environment, interact with other road users, and choose actions that may have ethical consequences. The authors further identify expectations and concerns that will form the basis for individual and societal acceptance of autonomous driving. While the safety benefits of such vehicles are tremendous, the authors demonstrate that these benefits will only be achieved if vehicles have an appropriate safety concept at the heart of their design. Realizing the potential of automated vehicles to reorganize traffic and transform mobility of people and goods requires similar care in the design of vehicles and networks. By covering all of these topics, the book aims to provide a current, comprehensive, and scientifically sound treatment of the emerging field of “autonomous driving".
Download or read book Fail operational Safety Architecture for ADAS AD Systems and a Model driven Approach for Dependent Failure Analysis written by Bülent Sari and published by Springer Nature. This book was released on 2020-02-05 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bülent Sari deals with the various fail-operational safety architecture methods developed with consideration of domain ECUs containing multicore processors and describes the model-driven approaches for the development of the safety lifecycle and the automated DFA. The methods presented in this study provide fail-operational system architecture and safety architecture for both conventional domains such as powertrains and for ADAS/AD systems in relation to the processing chain from sensors to actuators. About the Author: Bülent Sari works as a functional safety expert for autonomous driving projects. His doctoral thesis was supervised at the Institute of Internal Combustion Engines and Automotive Engineering, University of Stuttgart, Germany. He is a technical lead for not only functional safety in vehicles, but also for SOTIF, embracing the ISO 26262 standard as well as ISO PAS 21448. In this role, he coordinates and organizes the safety case execution of several product groups within different divisions of ZF.
Download or read book Advances in Artificial Transportation Systems and Simulation written by Rosaldo J F Rossetti and published by Academic Press. This book was released on 2014-12-15 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Intelligent Systems Series encompasses theoretical studies, design methods, and real-world implementations and applications. It publishes titles in three core sub-topic areas: Intelligent Automation, Intelligent Transportation Systems, and Intelligent Computing. Titles focus on professional and academic reference works and handbooks. This volume, Advances in Artificial Transportation Systems and Simulation, covers hot topics including driver assistance systems; cooperative vehicle-highway systems; collision avoidance; pedestrian protection; image, radar and lidar signal processing; and V2V and V2I communications. The readership for the series is broad, reflecting the wide range of intelligent systems interest and application, but focuses on engineering (in particular automation, control, mechatronics, robotics, transportation, automotive, aerospace), electronics and electronic design, and computer science. - Provides researchers and engineers with up to date research results and state-of-the art technologies in the area of intelligent vehicles and transportation systems - Includes case studies plus surveys of the latest research - Covers hot topics including driver assistance systems; cooperative vehicle-highway systems; collision avoidance; pedestrian protection; image, radar and lidar signal processing; V2V and V2I communications
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2007 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Collective Intelligence written by Ngoc Thanh Nguyen and published by Springer. This book was released on 2016-09-19 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set (LNAI 9875 and LNAI 9876) constitutes the refereed proceedings of the 8th International Conference on Collective Intelligence, ICCCI 2016, held in Halkidiki, Greece, in September 2016. The 108 full papers presented were carefully reviewed and selected from 277 submissions. The aim of this conference is to provide an internationally respected forum for scientific research in the computer-based methods of collective intelligence and their applications in (but not limited to) such fields as group decision making, consensus computing, knowledge integration, semantic web, social networks and multi-agent systems.
Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 2000 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Readings in Hardware Software Co Design written by Giovanni De Micheli and published by Morgan Kaufmann. This book was released on 2002 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title serves as an introduction ans reference for the field, with the papers that have shaped the hardware/software co-design since its inception in the early 90s.
Download or read book Intelligent Vehicle Initiative IVI Technology written by and published by SAE International. This book was released on 2004 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers delivered during the SAE 2004 World Congress, March 8-11, Detroit, Michigan.
Download or read book Automotive Software Architectures written by Miroslaw Staron and published by Springer Nature. This book was released on 2021-03-01 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept of software architecture as one of the cornerstones of software in modern cars. Following a historical overview of the evolution of software in modern cars and a discussion of the main challenges driving that evolution, Chapter 2 describes the main architectural styles of automotive software and their use in cars’ software. Chapter 3 details this further by presenting two modern architectural styles, i.e. centralized and federated software architectures. In Chapter 4, readers will find a description of the software development processes used to develop software on the car manufacturers’ side. Chapter 5 then introduces AUTOSAR – an important standard in automotive software. Chapter 6 goes beyond simple architecture and describes the detailed design process for automotive software using Simulink, helping readers to understand how detailed design links to high-level design. The new chapter 7 reports on how machine learning is exploited in automotive software e.g. for image recognition and how both on-board and off-board learning are applied. Next, Chapter 8 presents a method for assessing the quality of the architecture – ATAM (Architecture Trade-off Analysis Method) – and provides a sample assessment, while Chapter 9 presents an alternative way of assessing the architecture, namely by using quantitative measures and indicators. Subsequently Chapter 10 dives deeper into one of the specific properties discussed in Chapter 8 – safety – and details an important standard in that area, the ISO/IEC 26262 norm. Lastly, Chapter 11 presents a set of future trends that are currently emerging and have the potential to shape automotive software engineering in the coming years. This book explores the concept of software architecture for modern cars and is intended for both beginning and advanced software designers. It mainly aims at two different groups of audience – professionals working with automotive software who need to understand concepts related to automotive architectures, and students of software engineering or related fields who need to understand the specifics of automotive software to be able to construct cars or their components. Accordingly, the book also contains a wealth of real-world examples illustrating the concepts discussed and requires no prior background in the automotive domain. Compared to the first edition, besides the two new chapters 3 and 7 there are considerable updates in chapters 5 and 8 especially.
