Download or read book TOUGH2 User s Guide Version 2 0 written by K. Pruess and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Computing for Computational Science VECPAR 2012 written by Michel Dayde and published by Springer. This book was released on 2013-05-24 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 10th International Conference on High Performance Computing for Computational Science, VECPAR 2012, held in Kope, Japan, in July 2012. The 28 papers presented together with 7 invited talks were carefully selected during two rounds of reviewing and revision. The papers are organized in topical sections on CPU computing, applications, finite element method from various viewpoints, cloud and visualization performance, method and tools for advanced scientific computing, algorithms and data analysis, parallel iterative solvers on multicore architectures.
Download or read book Microfluidics and Nanofluidics Handbook 2 Volume Set written by Sushanta K. Mitra and published by CRC Press. This book was released on 2011-09-20 with total page 1767 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, two-volume handbook on Microfluidics and Nanofluidics, this text covers fundamental aspects, fabrication techniques, introductory materials on microbiology and chemistry, measurement techniques, and applications with special emphasis on the energy sector. Each chapter begins with introductory coverage to a subject and then narrows in on advanced techniques and concepts, thus making it valuable to students and practitioners. The author pays special attention to applications of microfluidics in the energy sector and provides insight into the world of opportunities nanotechnology has to offer. Figures, tables, and equations to illustrate concepts.
Download or read book Rock Characterisation Modelling and Engineering Design Methods written by Xia-Ting Feng and published by CRC Press. This book was released on 2013-05-17 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Characterisation, Modelling and Engineering Design Methods contains the contributions presented at the 3rd ISRM SINOROCK Symposium (Shanghai, China, 1820 June 2013). The papers contribute to the further development of the overall rock engineering design process through the sequential linkage of the three themes of rock characterisation, model
Download or read book Fluid Dynamics in Complex Fractured Porous Systems written by Boris Faybishenko and published by John Wiley & Sons. This book was released on 2015-06-04 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite of many years of studies, predicting fluid flow, heat, and chemical transport in fractured-porous media remains a challenge for scientists and engineers worldwide. This monograph is the third in a series on the dynamics of fluids and transport in fractured rock published by the American Geophysical Union (Geophysical Monograph Series, Vol. 162, 2005; and Geophysical Monograph, No. 122, 2000). This monograph is dedicated to the late Dr. Paul Witherspoon for his seminal influence on the development of ideas and methodologies and the birth of contemporary fractured rock hydrogeology, including such fundamental and applied problems as environmental remediation; exploitation of oil, gas, and geothermal resources; disposal of spent nuclear fuel; and geotechnical engineering. This monograph addresses fundamental and applied scientific questions and is intended to assist scientists and practitioners bridge gaps in the current scientific knowledge in the areas of theoretical fluids dynamics, field measurements, and experiments for different practical applications. Readers of this book will include researchers, engineers, and professionals within academia, Federal agencies, and industry, as well as graduate/undergraduate students involved in theoretical, experimental, and numerical modeling studies of fluid dynamics and reactive chemical transport in the unsaturated and saturated zones, including studies pertaining to petroleum and geothermal reservoirs, environmental management and remediation, mining, gas storage, and radioactive waste isolation in underground repositories. Volume highlights include discussions of the following: Fundamentals of using a complex systems approach to describe flow and transport in fractured-porous media. Methods of Field Measurements and Experiments Collective behavior and emergent properties of complex fractured rock systems Connection to the surrounding environment Multi-disciplinary research for different applications
Download or read book Geothermal Power Generation written by Ronald DiPippo and published by Woodhead Publishing. This book was released on 2016-05-25 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Power Generation: Developments and Innovation provides an update to the advanced energy technologies that are urgently required to meet the challenges of economic development, climate change mitigation, and energy security. As geothermal resources are considered renewable and can be used to generate baseload electricity while producing very low levels of greenhouse gas emissions, they can play a key role in future energy needs. This book, edited by a highly respected expert, provides a comprehensive overview of the major aspects of geothermal power production. The chapters, contributed by specialists in their respective areas, cover resource discovery, resource characterization, energy conversion systems, and design and economic considerations. The final section provides a range of fascinating case studies from across the world, ranging from Larderello to Indonesia. Users will find this to be an essential text for research and development professionals and engineers in the geothermal energy industry, as well as postgraduate researchers in academia who are working on geothermal energy. - Provides readers with a comprehensive and systematic overview of geothermal power generation - Presents an update to the advanced energy technologies that are urgently required to meet the challenges of economic development, climate change mitigation, and energy security - Edited by a world authority in the field, with chapters contributed by experts in their particular areas - Includes comprehensive case studies from across the world, ranging from Larderello to Indonesia
Download or read book Water in Road Structures written by Andrew Dawson and published by Springer Science & Business Media. This book was released on 2008-10-21 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Only book world-wide addressing this topic. The principal output of the European co-operative Action on "Water Movements in Road Pavements & Embankments". Provides unique guidance on assessing water condition and its affects on road performance. Provides unique guidance on assessing and ameliorating contaminant movement in pavement groundwater. Written by leading experts in Europe.
Download or read book Geothermal Energy Research Trends written by Hermann I. Ueckermann and published by Nova Publishers. This book was released on 2008 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal energy is a form of renewable energy derived from heat deep in the earth's crust. Enormous amounts of thermal energy are continuously generated by the decay of radioactive isotopes of underground rocks and stored in our globe's interior. This heat is as inexhaustible and renewable as solar energy. This heat is brought to the near-surface by thermal conduction and by intrusion into the earth's crust of molten magma originating from great depth. As groundwater is heated, geothermal energy is produced in the form of hot water and steam. The heated groundwater can be used for direct heating of homes and greenhouses, for vegetable drying, and for a number of other uses. These are known as direct uses of geothermal energy. Geothermal energy is also used for electricity production. This book presents leading-edge research in a field destined for increased attention throughout the world.
Download or read book Carbon Dioxide Capture for Storage in Deep Geologic Formations Results from the CO2 Capture Project written by David C Thomas and published by Elsevier. This book was released on 2005-01-06 with total page 1358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade, the prospect of climate change resulting from anthropogenic CO2 has become a matter of growing public concern. Not only is the reduction of CO2 emissions extremely important, but keeping the cost at a manageable level is a prime priority for companies and the public, alike.The CO2 capture project (CCP) came together with a common goal in mind: find a technological process to capture CO2 emissions that is relatively low-cost and able be to be expanded to industrial applications. The Carbon Dioxide Capture and Storage Project outlines the research and findings of all the participating companies and associations involved in the CCP. The final results of thousands of hours of research are outlined in the book, showing a successful achievement of the CCP's goals for lower cost CO2 capture technology and furthering the safe, reliable option of geological storage. The Carbon Dioxide Capture and Storage Project is a valuable reference for any scientists, industrialists, government agencies, and companies interested in a safer, more cost-efficient response to the CO2 crisis.*Succeeds in tackling the most important issues at the heart of the CO2 crisis: lower-cost and safer solutions, and making the technology available at an industrial level.*Contains technical papers and findings of all researchers involved in the CO2 capture and storage project (CCP)*Consolidates thousands of hours of research into a concise and valuable reference work, providing up-to-the minute information on CO2 capture and underground storage alternatives.
Download or read book Gas Transport in Porous Media written by Clifford K. Ho and published by Springer Science & Business Media. This book was released on 2006-10-07 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: CLIFFORD K. HOAND STEPHEN W. WEBB Sandia National Laboratories, P. O. Box 5800, Albuquerque, NM 87185, USA Gas and vapor transport in porous media occur in a number of important applications includingdryingofindustrialandfoodproducts,oilandgasexploration,environm- tal remediation of contaminated sites, and carbon sequestration. Understanding the fundamental mechanisms and processes of gas and vapor transport in porous media allows models to be used to evaluate and optimize the performance and design of these systems. In this book, gas and vapor are distinguished by their available states at stan- ? dard temperature and pressure (20 C, 101 kPa). If the gas-phase constituent can also exist as a liquid phase at standard temperature and pressure (e. g. , water, ethanol, toluene, trichlorothylene), it is considered a vapor. If the gas-phase constituent is non-condensable at standard temperature and pressure (e. g. , oxygen, carbon di- ide, helium, hydrogen, propane), it is considered a gas. The distinction is important because different processes affect the transport and behavior of gases and vapors in porous media. For example, mechanisms specific to vapors include vapor-pressure lowering and enhanced vapor diffusion, which are caused by the presence of a g- phase constituent interacting with its liquid phase in an unsaturated porous media. In addition, the “heat-pipe” exploits isothermal latent heat exchange during evaporation and condensation to effectively transfer heat in designed and natural systems.
Download or read book Handbook of Porous Media written by Kambiz Vafai and published by CRC Press. This book was released on 2015-06-23 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Porous Media, Third Edition offers a comprehensive overview of the latest theories on flow, transport, and heat-exchange processes in porous media. It also details sophisticated porous media models which can be used to improve the accuracy of modeling in a variety of practical applications. Featuring contributions from leading experts i
Download or read book Microfluidics and Nanofluidics Handbook written by Sushanta K. Mitra and published by CRC Press. This book was released on 2011-09-20 with total page 1103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook presents fundamental aspects, fabrication techniques, introductory materials on microbiology and chemistry, measurement techniques, and applications of microfluidics and nanofluidics. The first volume of the handbook focuses on physics and transport phenomena along with life sciences and related applications. It provides newcomers with the fundamental science background required for the study of microfluidics and nanofluidics. In addition, the advanced techniques and concepts described in the text will benefit experienced researchers and professionals.
Download or read book Coupled Thermo Hydro Mechanical Chemical Processes in Geo systems written by Ove Stephansson and published by Elsevier. This book was released on 2004-11-03 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the most important and exciting current steps forward in geo-engineering is the development of coupled numerical models. They represent the basic physics of geo-engineering processes which can include the effects of heat, water, mechanics and chemistry. Such models provide an integrating focus for the wide range of geo-engineering disciplines. The articles within this volume were originally presented at the inaugural GeoProc conference held in Stockholm and contain a collection of unusually high quality information not available elsewhere in an edited and coherent form. This collection not only benefits from the latest theoretical developments but also applies them to a number of practical and wide ranging applications. Examples include the environmental issues around radioactive waste disposal deep in rock, and the search for new reserves of oil and gas.
Download or read book Introduction to Environmental Forensics written by Brian L. Murphy and published by Elsevier. This book was released on 2007-05-01 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Environmental Forensics helps readers unravel the complexities of environmental pollution cases. It outlines techniques for identifying the source of a contaminant release, when the release occurred, and the extent of human exposure. Written by leading experts in environmental investigations, the text provides detailed information on chemical "fingerprinting" techniques applicable to ground water, soils, sediments, and air, plus an in-depth look at petroleum hydrocarbons. It gives the environmental scientist, engineer, and legal specialist a complete toolbox for conducting forensic investigations. It demonstrates the range of scientific analyses that are available to answer questions of environmental liability and support a legal argument, and provides several examples and case studies to illustrate how these methods are applied. This is a textbook that would prove useful to a range of disciplines, including environmental scientists involved in water and air pollution, contaminated land and geographical information systems; and archaeologists, hydrochemists and geochemists interested in dating sources of pollution. - Co-edited by one of the experts from the Civil Action case in Woburn, MA - Provides essential information about identifying environmental contaminants responsible for millions of deaths per year - Contains the latest information and coverage of issues crucial to both forensics investigators and environmental scientists
Download or read book Subsurface Fluid Flow and Imaging written by Donald Wyman Vasco and published by Cambridge University Press. This book was released on 2016-07-21 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified framework for subsurface imaging based upon asymptotic and trajectory-based methods, with online software applications.
Download or read book Fundamentals of Geoenvironmental Engineering written by Abdel-Mohsen O. Mohamed and published by Butterworth-Heinemann. This book was released on 2017-10-31 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Geoenvironmental Engineering: Understanding Soil, Water, and Pollutant Interaction and Transport examines soil-water-pollutant interaction, including physico-chemical processes that occur when soil is exposed to various contaminants. Soil characteristics relevant to remedial techniques are explored, providing foundations for the correct process selection. Built upon the authors' extensive experience in research and practice, the book updates and expands the content to include current processes and pollutants. The book discusses propagation of soil pollution and soil characteristics relevant to remedial techniques. Practicing geotechnical and environmental engineers can apply the theory and case studies in the book directly to current projects. The book first discusses the stages of economic development and their connections to the sustainability of the environment. Subsequent chapters cover waste and its management, soil systems, soil-water and soil-pollutant interactions, subsurface transport of pollutants, role of groundwater, nano-, micro- and biologic pollutants, soil characteristics that impact pollution diffusion, and potential remediation processes like mechanical, electric, magnetic, hydraulic and dielectric permittivity of soils. - Presents a clear understanding of the propagation of pollutants in soils - Identifies the physico-chemical processes in soils - Covers emerging pollutants (nano-, micro- and biologic contaminants) - Features in-depth coverage of hydraulic, electrical, magnetic and dielectric permittivity characteristics of soils and their impact on remedial technologies
Download or read book Unsaturated Soils Numerical and Theoretical Approaches written by Tom Schanz and published by Springer Science & Business Media. This book was released on 2005-12-28 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings document the various papers delivered and partially presented at the International Conference “From experimental evidence towards numerical modeling of unsaturated soils,” which was held in Weimar (Germany) during 18-19 September 2003. The conference was organized under the auspices of the International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE) and the National German G- technical Society (DGGT). The need to understand the behavior of unsaturated soils is becoming exclusively - sential for the geotechnical engineers and designers. In the last three decades many - searchers have made significant contribution to the understanding of the unsaturated soil mechanics. Nevertheless, application of the subject to variety of new problems still - quires our attention. This International conference is a mere attempt to unite researchers and engineers in geotechnical engineering and to discuss about the problems associated with the unsaturated soils. Doing so the objectives of these lecture notes are as follows: - to promote unsaturated soil mechanics for practical application, - to exchange experiences in experimental unsaturated soil mechanics and numerical modeling, - to discuss application of unsaturated soil mechanics to variety of problems. In other words, we could also name these two volumes as “From theory to daily pr- tice”. I would like to extend my deep sense of appreciation as the editor and the Head of the organizing committee, to many persons who have contributed either directly or indirectly to organize the International conference and to finalize these proceedings.
