Download or read book Advances in Motor Torque Control written by Mukhtar Ahmad and published by BoD – Books on Demand. This book was released on 2011-09-22 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric motors are widely used in industries to convert electrical energy into mechanical form. Control techniques are designed to improve the performance and efficiency of the drive so that large amounts of electrical energy can be saved. This book is primarily written with the objective of providing necessary information on use of electric motors for various applications in industries. During the last ten years a number of methods of control of electric drives have emerged. Some of these methods are described in this book. The reader will be able to understand the new methods of control used in drives, e.g. direct and sensorless control. Also the application of motor control in dentistry, the effect of human reaction and improvement of the efficiency of drives with control have been described.
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book Sensorless Vector and Direct Torque Control written by Peter Vas and published by Oxford, [Eng.] ; New York : Oxford University Press. This book was released on 1998 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book on sensorless high performance a.c. drives. It is essential reading for anyone interestred in acquiring a solid background on sensorless torque-controlled drives. It presents a detailed and unified treatment of sensorless vector-controlled and direct-torque controlled drive systems. It also discusses the applications of artificial intelligence to drives. Where possible, space vector theory is used and emphasis is laid on detailed mathematical and physical analysis. Sensorless drive schemes for different types of permanent magnet synchronous motors, synchronous reluctance motors, and induction motors are also presented. These include more than twenty vector drives e.g. five types of MRAS-based vector drives, and eleven types of direct-torque-controlled (DTC) drives, e.g. the ABB DTC drive. However, torque-controlled switched reluctance motor drives are also discussed due to their emerging importance. The book also covers various drive applications using artificial intelligence (fuzzy logic, neural networks, fuzzy-neural networks) and AI-based modelling of electrical machines. Finally, self-commissioning techniques are also discussed. This is a comprehensive thoroughly up-to-date, and self-contained book suitable for students at various levels, teachers, and industrial readership. Peter Vas is a Professor at the Department of Engineering at the University of Aberdeen, UK, where he is also the Head of the Intelligent Motion Control Group. His previous books published by Oxford University Press are extensively used worldwide.
Download or read book Direct Torque Control Strategies of Electrical Machines written by Fatma Ben Salem and published by BoD – Books on Demand. This book was released on 2021-01-20 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the design and analysis of Direct Torque Control (DTC). It introduces readers to two major applications of electrical machines: speed drive and position control and gives the readers a comprehensive overview of the field of DTC dedicated to AC machines. It includes new DTC approaches with and without control of commutation frequency. It also covers DTC applications using artificial intelligence. The book combines theoretical analysis, simulation, and experimental concepts.To make the content as accessible as possible, the book employs a clear proposal in each chapter, moving from the background, to numerical development, and finally to case studies and illustrations. The book is a wide-ranging reference source for graduate students, researchers, and professors from related fields and it will benefit practicing engineers and experts from the industry.
Download or read book Power in Flux written by Ted Dillard and published by . This book was released on 2017-02-01 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control in Power Electronics written by Marian P. Kaźmierkowski and published by Academic Press. This book was released on 2002-08-20 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control in Power Electronics explores all aspects of the study and use of electronic integrated circuits for the control and conversion of electrical energy. This technology is a critical part of our energy infrastructure, and supports almost all important electrical applications and devices. Improvements in devices and advances in control concepts have led to steady improvements in power electronic applications. This is driving a tremendous expansion of their applications. Control in Power Electronics brings together a team of leading experts as contributors. This is the first book to thoroughly combine control methods and techniques for power electronic systems. The development of new semiconductor power components, new topologies of converters from one side coupled with advances in modern control theory and digital signal processors has made this book possible and presents the applications necessary for modern design engineers. The authors were originally brought together to share research and applications through the international Danfoss Professor Programme at Aalborg University in Denmark. ersonal computers would be unwieldy and inefficient without power electronic dc supplies. Portable communication devices and computers would also be impractical. High-performance lighting systems, motor controls, and a wide range of industrial controls depend on power electronics. In the near future we can expect strong growth in automotive applications, dc power supplies for communication systems, portable applications, and high-end converters. We are approaching a time when all electrical energy will be processed and controlled through power electronics somewhere in the path from generation to end use.
Download or read book Classical Feedback Control written by Boris Lurie and published by CRC Press. This book was released on 2000-02-09 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text describes the design and implementation of high-performance feedback controllers for engineering systems. It emphasizes the frequency-domain design and methods based on Bode integrals, loop shaping and nonlinear dynamic compensation. The book also supplies numerous problems with practcal applications, illustrations and plots, together with MATLAB simulation and design examples.
Download or read book Electrical Machine Drives Control written by Juha Pyrhonen and published by John Wiley & Sons. This book was released on 2016-10-03 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text examines existing and emerging electrical drive technologies. The authors clearly define the most basic electrical drive concepts and go on to explain the most important details while maintaining a solid connection to the theory and design of the associated electrical machines. Also including links to a number of industrial applications, the authors take their investigation of electrical drives beyond theory to examine a number of practical aspects of electrical drive control and application. Key features: * Provides a comprehensive summary of all aspects of controlled-speed electrical drive technology including control and operation. * Handling of electrical drives is solidly linked to the theory and design of the associated electrical machines. Added insight into problems and functions are illustrated with clearly understandable figures. * Offers an understanding of the main phenomena associated with electrical machine drives. * Considers the problem of bearing currents and voltage stresses of an electrical drive. * Includes up-to-date theory and design guidelines, taking into account the most recent advances. This book’s rigorous coverage of theoretical principles and techniques makes for an excellent introduction to controlled-speed electrical drive technologies for Electrical Engineering MSc or PhD students studying electrical drives. It also serves as an excellent reference for practicing electrical engineers looking to carry out design, analyses, and development of controlled-speed electrical drives.
Download or read book Induction Motors written by Bahram Amin and published by Springer Science & Business Media. This book was released on 2001-11-20 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough approach for mastering the behavior and operation of induction motors, an essential device in the modern industrial world. Its way of presentation renders this book suitable for selfteaching by students, engineers, and researchers in the field of electrical engineering. It covers the modern theory of induction motor applications and control methods. The transient analysis of both three-phase and single-phase induction motors as well as that of the double-cage motors are developed. The principles of such modern control methods as Fiel-Oriented Control, Direct Torque Control and Computed Charges Acceleration Method are clearly treated in this monograph. Numerous equations, simulations, and figures are presented.
Download or read book Integrated Powertrains and Their Control written by Nicholas Vaughan and published by John Wiley & Sons. This book was released on 2001-06-22 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: An invaluable overview of the latest powertrain technology Integrated Powertrains and Their Control provides an overview of the latest in powertrain technology from an expert in the field. Based on current and ongoing research, this book updates the field's body of knowledge by highlighting new advances in design, modeling, and simulation as well as implementation considerations dictated by new and evolving legal requirements. Relevant to mechanical engineers in both research and industry, this book provides valuable insight and directions for future investigations.
Download or read book Motor Vehicle written by T. K. Garrett and published by Butterworth-Heinemann. This book was released on 2000-12-18 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: "As a reference book it has to be classed as one of the best! There should be a copy of it in every college library." Association of Motor Vehicle Teachers' Newsletter The Motor Vehicle has been an essential reference work for both the student and practising engineer ever since the first edition appeared in 1929. Today it is as indispensable to anyone with a serious interest in vehicle design techniques, systems and construction as it was then. The current edition has undergone a major revision to include seven new chapters. These include Electric Propulsion; covering all aspects from lead acid and alternative batteries to fuel cells and hybrid vehicles, Static and Dynamic Safety, and Wheels and Tyres. The chapter on the compression ignition engine has been expanded to form three chapters, concentrating on aspects such as common rail injection, recently developed distributor type pumps and electronic control of injection. Automatic, semi-automatic and continuously variable ratio transmissions are covered in two new chapters. A third contains information on the latest developments in computer-aided control over both braking and traction, for improving vehicle stability, while another contains entirely new information on the practice and principles of electrically-actuated power-assisted steering. Also included is coverage of material detailing the latest knowledge and practice relating to safety systems, vehicle integrity, braking systems and much more. The established layout of the book is retained, with topics relating to the Engine, Transmission and Carriage Unit dealt with in turn. Each chapter is well-provided with diagrams, sections, schematics and photographs, all of which contribute to a clear and concise exposition of the material under discussion.Latest extensive revisions to a well-established titleNew chapters on electric propulsion and vehicle safety.
Download or read book Control Instrumentation and Mechatronics Theory and Practice written by Norhaliza Abdul Wahab and published by Springer Nature. This book was released on 2022-07-07 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceeding includes original and peer-reviewed research papers from the 3rd International Conference on Control, Instrumentation and Mechatronics Engineering (CIM2022). The conference is a virtual conference held on 2-3 March 2022. The topics covered latest work and finding in the area of Control Engineering, Mechatronics, Robotics and Automation, Artificial Intelligence, Manufacturing, Sensor, Measurement and Instrumentation. Moreover, the latest applications of instrumentations, control and mechatronics are provided. Therefore, this proceeding is a valuable material for researchers, academicians, university students and engineers.
Download or read book Power Converters Drives and Controls for Sustainable Operations written by S. Ganesh Kumar and published by John Wiley & Sons. This book was released on 2023-06-23 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: POWER CONVERTERS, DRIVES AND CONTROLS FOR SUSTAINABLE OPERATIONS Written and edited by a group of experts in the field, this groundbreaking reference work sets the standard for engineers, students, and professionals working with power converters, drives, and controls, offering the scientific community a way towards combating sustainable operations. The future of energy and power generation is complex. Demand is increasing, and the demand for cleaner energy and electric vehicles (EVs) is increasing with it. With this increase in demand comes an increase in the demand for power converters. Part one of this book is on switched-mode converters and deals with the need for power converters, their topologies, principles of operation, their steady-state performance, and applications. Conventional topologies like buck, boost, buck-boost converters, inverters, multilevel inverters, and derived topologies are covered in part one with their applications in fuel cells, photovoltaics (PVs), and EVs. Part two is concerned with electrical machines and converters used for EV applications. Standards for EV, charging infrastructure, and wireless charging methodologies are addressed. The last part deals with the dynamic model of the switched-mode converters. In any DC-DC converter, it is imperative to control the output voltage as desired. Such a control may be achieved in a variety of ways. While several types of control strategies are being evolved, the popular method of control is through the duty cycle of the switch at a constant switching frequency. This part of the book briefly reviews the conventional control theory and builds on the same to develop advanced techniques in the closed-loop control of switch mode power converters (SMPC), such as sliding mode control, passivity-based control, model predictive control (MPC), fuzzy logic control (FLC), and backstepping control. A standard reference work for veteran engineers, scientists, and technicians, this outstanding new volume is also a valuable introduction to new hires and students. Useful to academics, researchers, engineers, students, technicians, and other industry professionals, it is a must-have for any library.
Download or read book Electronic Transmission Controls written by Ronald K Jurgen and published by SAE International. This book was released on 2000-06-10 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of the automotive transmission has changed rapidly in the last decade, partly due to the advantages of highly sophisticated electronic controls. This evolution has resulted in modern automatic transmissions that offer more control, stability, and convenience to the driver. Electronic Transmission Controls contains 68 technical papers from SAE and other international organizations written since 1995 on this rapidly growing area of automotive electronics. This book breaks down the topic into two sections. The section on Stepped Transmissions covers recent developments in regular and 4-wheel drive transmissions from major auto manufacturers including DaimlerChrysler, General Motors, Toyota, Honda, and Ford. Technology covered in this section includes: smooth shift control; automatic transmission efficiency; mechatronic systems; fuel saving technologies; shift control using information from vehicle navigation systems; and fuzzy logic control. The section on Continuously Variable Transmissions presents papers that demonstrate that CVTs offer better efficiency than conventional transmissions. Technologies covered in this section include: powertrain control; fuel consumption improvement; development of a 2-way clutch system; internal combustion engines with CVTs in passenger cars; control and shift strategies; and CVT application to hybrid powertrains. The book concludes with a chapter on the future of electronic transmissions in automobiles.
Download or read book Proceedings of Symposium on Power Electronic and Renewable Energy Systems Control written by Sankarsan Mohapatro and published by Springer Nature. This book was released on 2021-07-09 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality research papers presented at Symposium on Power Electronic and Renewable Energy Systems Control (PERESC 2020), which is held at the School of Electrical Sciences, IIT Bhubaneswar, Odisha, India, during 4–5 December 2020. The book covers original work in power electronics which has greatly enabled integration of renewable and distributed energy systems, control of electric machine drives, high voltage system control and operation. The book is highly useful for academicians, engineers, researchers and students to be familiar with the latest state of the art in power electronics technology and its applications.
Download or read book Advances in Computing Communication and Control written by Srija Unnikrishnan and published by Springer. This book was released on 2013-01-11 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Third International Conference on Advances in Computing, Communication and Control, ICAC3 2013, held in Mumbai, India, in January 2013. The 69 papers presented in this volume were carefully reviewed and selected for inclusion in the book. They deal with topics such as image processing, artificial intelligence, robotics, wireless communications; data warehousing and mining, and are organized in topical sections named: computing; communication; control; and others.
Download or read book Futuristic Projects in Energy and Automation Sectors A Brief Review of New Technologies Driving Sustainable Development written by Alok Kumar Verma and published by Bentham Science Publishers. This book was released on 2023-05-19 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Futuristic Projects in Energy and Automation Sectors is a review of analyses on energy transitions in power grids and the opportunities and challenges for building sustainable energy systems to improve human capabilities. 14 chapters examine renewable energy-based and automated systems, with a focus on projects that are designed with sustainability in mind. Topics covered in this review include 1) power systems, 2) renewable energy, 3) power electronics, 4) energy storage and conversion, 5) home automation, 6) control systems, 7) robotics, 8) artificial intelligence, and 9) technology to fight COVID-19. This review will be of interest to scholars, and policymakers interested in futuristic and urban and rural energy planning, sustainable and renewable energy projects, sustainable development, and environment management.
