Download or read book Topology Design of Robot Mechanisms written by Ting-Li Yang and published by Springer. This book was released on 2018-01-02 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the topology theory of mechanisms developed by the authors and provides a systematic method for the topology design of robot mechanisms. The main original theoretical contributions of this book include: A. Three basic concepts · The “geometrical constraint type of axes” is introduced as the third element of the topological structure of a mechanism. When it is combined with the other two elements, the kinematic pair and the connection of links, the symbolic expression of the topological structure is independent of the motion positions (except for the singularity positions) and the fixed coordinate system (Chapter 2). · The position and orientation characteristic (POC) set is used to describe the POC of the relative motion between any two links. The POC set, derived from the unit vector set of the velocity of a link, is only depend on the topological structure of a mechanism. Therefore, it is also independent of the motion positions and the fixed coordinate system (Chapter 3). · The single open chain (SOC) unit is the base unit of the topological structure used to develop the four basic equations of the mechanism topology (Chapters 2, 4–6). B. The mechanism composition principle based on the SOC units This book proposes a mechanism composition principle, based on the SOC units, to establish a systematic theory for the unified modeling of the topology, kinematics, and dynamics of mechanisms based on the SOC units (Chapter 7). C. Four basic equations • The POC equation of serial mechanisms with 10 symbolic operation rules (Chapter 4). • The POC equation of parallel mechanisms with 14 symbolic operation rules (Chapter 5). • The general DOF formula for spatial mechanisms (Chapter 6). • The coupling degree formula for the Assur kinematic chain (Chapter 7). D. One systematic method for the topology design of robot mechanisms (Chapters 8–10) Based on the three basic concepts and the four basic equations addressed above, this book puts forward a systematic method for the topology design of parallel mechanisms, which is fundamentally different from all existing methods. Its main characteristics are as follows: • The design process includes two stages: the first is structure synthesis, which derives many structure types; the second involves the performance analysis, classification and optimization of structure types derived from the first stage. • The design operation is independent of the motion positions and the fixed coordinate system. Therefore, the proposed method is essentially a geometrical method, which ensures the full-cycle DOF and the generality of geometric conditions of mechanism existence. • Each individual design step follows an explicit formula or the guidelines for design criteria, making the operation simple, feasible and reproducible. In addition, the topology design of the SCARA PMs is studied in detail to demonstrate the proposed method (Chapter 10).

Download or read book Finite and Instantaneous Screw Theory in Robotic Mechanism written by Tao Sun and published by Springer Nature. This book was released on 2020-02-13 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a finite and instantaneous screw theory for the development of robotic mechanisms. It addresses the analytical description and algebraic computation of finite motion, resulting in a generalized type synthesis approach. It then discusses the direct connection between topology and performance models, leading to an integrated performance analysis and design framework. The book then explores parameter uncertainty and multiple performance requirements for reliable, optimal design methods, and describes the error accumulation principle and parameter identification algorithm, to increase robot accuracy. It proposes a unified and generic methodology, and appliesto the invention, analysis, design, and calibration of robotic mechanisms. The book is intended for researchers, graduate students and engineers in the fields of robotic mechanism and robot design and applications./div

Download or read book Advances in Reconfigurable Mechanisms and Robots II written by Xilun Ding and published by Springer. This book was released on 2015-11-23 with total page 1117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent advances in the research and applications of reconfigurable mechanisms and robots. It collects 93 independently reviewed papers presented at the Third ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2015) held in Beijing, China, 20-22 July 2015. The conference papers are organized into seven parts to cover the reconfiguration theory, topology, kinematics and design of reconfigurable mechanisms including reconfigurable parallel mechanisms. The most recent results on reconfigurable robots are presented including their analysis, design, simulation and control. Bio-inspired mechanisms are also explored in the challenging fields of rehabilitation and minimally invasive surgery. This book further addresses deployable mechanisms and origami-inspired mechanisms and showcases a wide range of successful applications of reconfigurable mechanisms and robots. Advances in Reconfigurable Mechanisms and Robots II should be of interest for researchers, engineers and postgraduate students in mechanical engineering, electrical engineering, computer science and mathematics.

Download or read book Mechanism Design for Robotics written by Alessandro Gasparetto and published by Springer. This book was released on 2018-08-30 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the Proceedings of the 4th IFToMM Symposium on Mechanism Design for Robotics, held in Udine, Italy, 11-13 September, 2018. It includes recent advances in the design of mechanisms and their robotic applications. It treats, among others, the following topics: mechanism design, mechanics of robots, parallel manipulators, actuators and their control, linkage and industrial manipulators, innovative mechanisms/robots and their applications. This book can be used by students, researchers and engineers in the relevant areas of mechanisms, machines and robotics.

Download or read book Advances in Reconfigurable Mechanisms and Robots I written by Jian S Dai and published by Springer Science & Business Media. This book was released on 2012-06-13 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Reconfigurable Mechanisms and Robots I provides a selection of key papers presented in The Second ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2012) held on 9th -11th July 2012 in Tianjin, China. This ongoing series of conferences will be covered in this ongoing collection of books. A total of seventy-eight papers are divided into seven parts to cover the topology, kinematics and design of reconfigurable mechanisms with the reconfiguration theory, analysis and synthesis, and present the current research and development in the field of reconfigurable mechanisms including reconfigurable parallel mechanisms. In this aspect, the recent study and development of reconfigurable robots are further presented with the analysis and design and with their control and development. The bio-inspired mechanisms and subsequent reconfiguration are explored in the challenging fields of rehabilitation and minimally invasive surgery. Advances in Reconfigurable Mechanisms and Robots I further extends the study to deployable mechanisms and foldable devices and introduces applications of reconfigurable mechanisms and robots. The rich-content of Advances in Reconfigurable Mechanisms and Robots I brings together new developments in reconfigurable mechanisms and robots and presents a new horizon for future development in the field of reconfigurable mechanisms and robots.

Download or read book Recent Advances in Mechanism Design for Robotics written by Shaoping Bai and published by Springer. This book was released on 2015-05-05 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the Proceedings of the 3rd IFToMM Symposium on Mechanism Design for Robotics, held in Aalborg, Denmark, 2-4 June, 2015. The book contains papers on recent advances in the design of mechanisms and their robotic applications. It treats the following topics: mechanism design, mechanics of robots, parallel manipulators, actuators and their control, linkage and industrial manipulators, innovative mechanisms/robots and their applications, among others. The book can be used by researchers and engineers in the relevant areas of mechanisms, machines and robotics.

Download or read book Mechanisms Transmissions and Applications written by Burkhard Corves and published by Springer. This book was released on 2015-04-02 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with topics such as mechanism and machine design, biomechanics and medical engineering, gears, mechanical transmissions, mechatronics, computational and experimental methods, dynamics of mechanisms and machines, micromechanisms and microactuators, and history of mechanisms and transmissions. Following MeTrApp 2011 and 2013, held under the auspices of the IFToMM, these proceedings of the 3rd Conference on Mechanisms, Transmissions and Applications offer a platform for original research presentations for researchers, scientists, industry experts and students in the fields of mechanisms and transmissions with special emphasis on industrial applications in order to stimulate the exchange of new and innovative ideas.

Download or read book New Advances in Mechanisms Mechanical Transmissions and Robotics written by Erwin-Christian Lovasz and published by Springer Nature. This book was released on 2020-10-14 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the proceedings of the Joint International Conference of the XIII International Conference on Mechanisms and Mechanical Transmissions (MTM) and the XXIV International Conference on Robotics (Robotics), held in Timişoara, Romania. It addresses the applications of mechanisms and transmissions in several modern technical fields such as mechatronics, biomechanics, machines, micromachines, robotics and apparatus. In doing so, it combines theoretical findings and experimental testing. The book presents peer-reviewed papers written by researchers specialized in mechanism analysis and synthesis, dynamics of mechanisms and machines, mechanical transmissions, biomechanics, precision mechanics, mechatronics, micromechanisms and microactuators, computational and experimental methods, CAD in mechanism and machine design, mechanical design of robot architecture, parallel robots, mobile robots, micro and nano robots, sensors and actuators in robotics, intelligent control systems, biomedical engineering, teleoperation, haptics, and virtual reality.

Download or read book Advances in Mechanism Machine Science and Engineering in China written by Xinjun Liu and published by Springer Nature. This book was released on 2023-05-31 with total page 2228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the conference proceedings of the 23rd IFToMM China International Conference on Mechanism and Machine Science & Engineering (IFToMM CCMMS 2022). CCMMS was initiated in 1982, and it is the most important forum held in China for the exchange of research ideas, presentation of technical and scientific achievements, and discussion of future directions in the field of mechanism and machine science. The topics include parallel/hybrid mechanism synthesis and analysis, theoretical & computational kinematics, compliant mechanisms and micro/nano-mechanisms, reconfigurable and metamorphic mechanisms, space structures, mechanisms and materials, structure adaptation in space environment and ground testing, large-scale membrane deployable structures, construction and application of super-scale space systems, cams, gears and combining mechanisms, fluid power mechatronics drivetrain, mechanical design theory and methods, dynamics and vibration control, mechatronics, biologically inspired mechanisms and robotics, medical & rehabilitation robotics, mobile robotics, soft robotics, heavy non-road mobile machine, robot applications, engineering education on mechanisms, machines, and robotics. This book provides a state-of-the-art overview of current advances in mechanism and machine science in China. The inspiring ideas presented in the papers enlighten academic research and industrial application. The potential readers include academic researchers and industrial professionals in mechanism and machine science.

Download or read book Proceedings of the 5th IEEE IFToMM International Conference on Reconfigurable Mechanisms and Robots written by Fengfeng (Jeff) Xi and published by ReMAR2021. This book was released on 2021-08-12 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th IEEE/IFToMM International Conference on Re-configurable Mechanisms and Robots (ReMAR 2021) was held in Toronto, Canada on August 12-14, 2021 at Ryerson University. The conference proceedings include more than 70 papers on three main subjects, 1) Reconfigurable Mechanisms and Robotics, 2) Variable Topology and Morphing Mechanism, and 3)Origami and Bio-inspired mechanisms.

Download or read book New Trends in Mechanism and Machine Science written by Doina Pisla and published by Springer Nature. This book was released on 2020-08-20 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the latest research and industrial applications in the areas of mechanism science, robotics and dynamics. The respective contributions cover such topics as computational kinematics, control issues in mechanical systems, mechanisms for medical rehabilitation, mechanisms for minimally invasive techniques, cable robots, design issues for mechanisms and robots, and the teaching and history of mechanisms. Written by leading researchers and engineers, and selected by means of a rigorous international peer-review process, the papers highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations. They reflect the outcomes of the 8th European Conference on Mechanism Science (EuCoMeS) in 2020.

Download or read book Mechanism and Machine Science written by Xianmin Zhang and published by Springer. This book was released on 2016-11-15 with total page 1565 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings collect the latest research results in mechanism and machine science, intended to reinforce and improve the role of mechanical systems in a variety of applications in daily life and industry. Gathering more than 120 academic papers, it addresses topics including: Computational kinematics, Machine elements, Actuators, Gearing and transmissions, Linkages and cams, Mechanism design, Dynamics of machinery, Tribology, Vehicle mechanisms, dynamics and design, Reliability, Experimental methods in mechanisms, Robotics and mechatronics, Biomechanics, Micro/nano mechanisms and machines, Medical/welfare devices, Nature and machines, Design methodology, Reconfigurable mechanisms and reconfigurable manipulators, and Origami mechanisms. This is the fourth installment in the IFToMM Asian conference series on Mechanism and Machine Science (ASIAN MMS 2016). The ASIAN MMS conference initiative was launched to provide a forum mainly for the Asian community working in Mechanism and Machine Science, in order to facilitate collaboration and improve the visibility of activities in the field. The series started in 2010 and the previous ASIAN MMS events were successfully held in Taipei, China (2010), Tokyo, Japan (2012), and Tianjin, China (2014). ASIAN MMS 2016 was held in Guangzhou, China, from 15 to 17 December 2016, and was organized by the South China University under the patronage of the IFToMM and the Chinese Mechanical Engineering Society (CMES). The aim of the Conference was to bring together researchers, industry professionals and students from the broad range of disciplines connected to Mechanism Science in a collegial and stimulating environment. The ASIAN MMS 2016 Conference provided a platform allowing scientists to exchange notes on their scientific achievements and establish new national and international collaborations concerning the mechanism science field and its applications, mainly but not exclusively in Asian contexts.

Download or read book Intelligent Robotics and Applications written by Naoyuki Kubota and published by Springer. This book was released on 2016-08-02 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set LNAI 9834 and 9835 constitutes the refereed proceedings of the 9th International Conference on Intelligent Robotics and Applications, ICIRA 2016, held in Tokyo, Japan, in August 2016. The 114 papers presented were carefully reviewed and selected from 148 submissions. The papers are organized in topical sections such as Robot Control; Robot Mechanism, Robot Vision and Sensing; Planning, Localization, and Mapping; Interactive Intelligence; Cognitive Robotics; Bio-Inspired Robotics; Smart Material Based Systems; Mechatronics Systems for Nondestructive Testing; Social Robotics; Human Support Robotics; Assistive Robotics; Intelligent Space; Sensing and Monitoring in Environment and Agricultural Sciences; Human Data Analysis; Robot Hand.

Download or read book Advances in Mechanism and Machine Science written by Tadeusz Uhl and published by Springer. This book was released on 2019-06-13 with total page 4248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 15th IFToMM World Congress, which was held in Krakow, Poland, from June 30 to July 4, 2019. Having been organized every four years since 1965, the Congress represents the world’s largest scientific event on mechanism and machine science (MMS). The contributions cover an extremely diverse range of topics, including biomechanical engineering, computational kinematics, design methodologies, dynamics of machinery, multibody dynamics, gearing and transmissions, history of MMS, linkage and mechanical controls, robotics and mechatronics, micro-mechanisms, reliability of machines and mechanisms, rotor dynamics, standardization of terminology, sustainable energy systems, transportation machinery, tribology and vibration. Selected by means of a rigorous international peer-review process, they highlight numerous exciting advances and ideas that will spur novel research directions and foster new multidisciplinary collaborations.

Download or read book Geometric Method for Type Synthesis of Parallel Manipulators written by Qinchuan Li and published by Springer. This book was released on 2019-07-03 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the synthesis of lower-mobility parallel manipulators, presenting a group-theory-based method that has the advantage of being geometrically intrinsic. Rotations and translations of a rigid body as well as a combination of the two can be expressed and handled elegantly using the group algebraic structure of the set of rigid-body displacements. The book gathers the authors’ research results, which were previously scattered in various journals and conference proceedings, presenting them in a unified form. Using the presented method, it reveals numerous novel architectures of lower-mobility parallel manipulators, which are of interest to those in the robotics community. More importantly, readers can use the method and tool to develop new types of lower-mobility parallel manipulators independently.

Download or read book Parallel PnP Robots written by Guanglei Wu and published by Springer Nature. This book was released on 2020-08-08 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the parametric modeling, performance evaluation, design optimization and comparative study of the high-speed, parallel pick-and-place robots. It collects the modeling methodology, evaluation criteria and design guidelines for parallel PnP robots to provide a systematic analysis method for robotic developers. Furthermore, it gathers the research results previously scattered in many prestigious international journals and conference proceedings and methodically edits them and presents them in a unified form. The book is of interest to researchers, R&D engineers and graduate students in industrial parallel robotics who wish to learn the core principles, methods, algorithms, and applications.

Download or read book Advances in Asian Mechanism and Machine Science written by Nguyen Van Khang and published by Springer Nature. This book was released on 2021-12-14 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 6th IFToMM Asian Mechanisms and Machine Science Conference (Asian MMS), held in Hanoi, Vietnam on December 15-18, 2021. It includes peer-reviewed papers on the latest advances in mechanism and machine science, discussing topics such as biomechanical engineering, computational kinematics, the history of mechanism and machine science, gearing and transmissions, multi-body dynamics, robotics and mechatronics, the dynamics of machinery, tribology, vibrations, rotor dynamics and vehicle dynamics. A valuable, up-to-date resource, it offers an essential overview of the subject for scientists and practitioners alike, and will inspire further investigations and research.