Download or read book Top Quark Pair Production written by Anna Christine Henrichs and published by Springer Science & Business Media. This book was released on 2013-10-04 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Before any kind of new physics discovery could be made at the LHC, a precise understanding and measurement of the Standard Model of particle physics' processes was necessary. The book provides an introduction to top quark production in the context of the Standard Model and presents two such precise measurements of the production of top quark pairs in proton-proton collisions at a center-of-mass energy of 7 TeV that were observed with the ATLAS Experiment at the LHC. The presented measurements focus on events with one charged lepton, missing transverse energy and jets. Using novel and advanced analysis techniques as well as a good understanding of the detector, they constitute the most precise measurements of the quantity at that time.
Download or read book Top Quark Pair Production and Top Quark Properties at CDF written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We present the most recent measurements of top quark pairs production and top quark properties in proton-antiproton collisions with center-of-mass energy of 1.96 TeV using CDF II detector at the Tevatron. The combination of top pair production cross section measurements and the direct measurement of top quark width are reported. The test of Standard Model predictions for top quark decaying into $b$-quarks, performed by measuring the ratio $R$ between the top quark branching fraction to $b$-quark and the branching fraction to any type of down quark is shown. The extraction of the CKM matrix element $
Download or read book Heavy Quark Physics written by Aneesh V. Manohar and published by Cambridge University Press. This book was released on 2023-07-31 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Top Quark Pair Production Cross Sections and Calibration of the Top Quark Monte Carlo Mass written by Jan Kieseler and published by Springer. This book was released on 2016-06-15 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents the first experimental calibration of the top-quark Monte-Carlo mass. It also provides the top-quark mass-independent and most precise top-quark pair production cross-section measurement to date. The most precise measurements of the top-quark mass obtain the top-quark mass parameter (Monte-Carlo mass) used in simulations, which are partially based on heuristic models. Its interpretation in terms of mass parameters used in theoretical calculations, e.g. a running or a pole mass, has been a long-standing open problem with far-reaching implications beyond particle physics, even affecting conclusions on the stability of the vacuum state of our universe. In this thesis, this problem is solved experimentally in three steps using data obtained with the compact muon solenoid (CMS) detector. The most precise top-quark pair production cross-section measurements to date are performed. The Monte-Carlo mass is determined and a new method for extracting the top-quark mass from theoretical calculations is presented. Lastly, the top-quark production cross-sections are obtained – for the first time – without residual dependence on the top-quark mass, are interpreted using theoretical calculations to determine the top-quark running- and pole mass with unprecedented precision, and are fully consistently compared with the simultaneously obtained top-quark Monte-Carlo mass.
Download or read book Top Quark Pair Production in ATLAS written by and published by . This book was released on 2012 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Lifetime Effects in Top Quark Pair Production at Threshold written by Christoph Josef Reißer and published by Cuvillier Verlag. This book was released on 2008 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Study on the Top Quark Pair Production Mechanism in 1 96 TeV Proton antiproton Collisions written by and published by . This book was released on 2008 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of the top quark pair production mechanism in proton-antiproton collisions at a center-of-mass energy of 1.96 TeV is described. The main subjects are the measurements of the top quark pair production cross section, the top quark mass and a search for a new particle decaying to the top quark pair. The analyses are based on 1.9 fb−1 of data collected by the Collider Detector at Fermilab (CDF) Run II experiment between March 2002 and May 2007, using the lepton+jets events. The measured top quark pair production cross section is 8.2 ± 0.5 (stat.) ± 0.8 (syst.) ± 0.5 (lum.) pb, which is slightly higher than the standard model prediction at the top mass of 175 GeV/c2. The top quark mass is an important parameter in the standard model, and also in the experimental studies. The measured top quark mass if 171.6 ± 2.0 (stat.) ± 1.3(syst.) GeV/c2. Finally, they report on a search for a new gauge boson decaying to t{bar t}, which interferes with the standard model gluon in the q{bar q} --> t{bar t} production process. They call such a hypothetical particle a 'Massive Gluon'. The observed t{bar t} invariant mass distribution is consistent with the standard model expectations, and also the measured massive gluon coupling strength with quarks is consistent within a statistical fluctuation of the standard model expectation in the wide range of the massive gluon masses and widths. They set the upper and lower limits on the coupling strength of the massive gluon.
Download or read book Looking Inside Jets written by Simone Marzani and published by Springer. This book was released on 2019-05-11 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise primer reviews the latest developments in the field of jets. Jets are collinear sprays of hadrons produced in very high-energy collisions, e.g. at the LHC or at a future hadron collider. They are essential to and ubiquitous in experimental analyses, making their study crucial. At present LHC energies and beyond, massive particles around the electroweak scale are frequently produced with transverse momenta that are much larger than their mass, i.e., boosted. The decay products of such boosted massive objects tend to occupy only a relatively small and confined area of the detector and are observed as a single jet. Jets hence arise from many different sources and it is important to be able to distinguish the rare events with boosted resonances from the large backgrounds originating from Quantum Chromodynamics (QCD). This requires familiarity with the internal properties of jets, such as their different radiation patterns, a field broadly known as jet substructure. This set of notes begins by providing a phenomenological motivation, explaining why the study of jets and their substructure is of particular importance for the current and future program of the LHC, followed by a brief but insightful introduction to QCD and to hadron-collider phenomenology. The next section introduces jets as complex objects constructed from a sequential recombination algorithm. In this context some experimental aspects are also reviewed. Since jet substructure calculations are multi-scale problems that call for all-order treatments (resummations), the bases of such calculations are discussed for simple jet quantities. With these QCD and jet physics ingredients in hand, readers can then dig into jet substructure itself. Accordingly, these notes first highlight the main concepts behind substructure techniques and introduce a list of the main jet substructure tools that have been used over the past decade. Analytic calculations are then provided for several families of tools, the goal being to identify their key characteristics. In closing, the book provides an overview of LHC searches and measurements where jet substructure techniques are used, reviews the main take-home messages, and outlines future perspectives.
Download or read book Top Quark Pair Production at the LHC written by Peter Bärnreuther and published by . This book was released on 2012 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book QCD and Collider Physics written by R. K. Ellis and published by Cambridge University Press. This book was released on 2003-12-04 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed overview of the physics of high-energy colliders emphasising the role of QCD.
Download or read book Physics at the Large Hadron Collider written by Amitava Datta and published by Springer Science & Business Media. This book was released on 2010-05-30 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an epoch when particle physics is awaiting a major step forward, the Large Hydron Collider (LHC) at CERN, Geneva will soon be operational. It will collide a beam of high energy protons with another similar beam circulation in the same 27 km tunnel but in the opposite direction, resulting in the production of many elementary particles some never created in the laboratory before. It is widely expected that the LHC will discover the Higgs boson, the particle which supposedly lends masses to all other fundamental particles. In addition, the question as to whether there is some new law of physics at such high energy is likely to be answered through this experiment. The present volume contains a collection of articles written by international experts, both theoreticians and experimentalists, from India and abroad, which aims to acquaint a non-specialist with some basic issues related to the LHC. At the same time, it is expected to be a useful, rudimentary companion of introductory exposition and technical expertise alike, and it is hoped to become unique in its kind. The fact that there is substantial Indian involvement in the entire LHC endeavour, at all levels including fabrication, physics analysis procedures as well as theoretical studies, is also amply brought out in the collection.
Download or read book Top Quark Physics at Hadron Colliders written by Arnulf Quadt and published by Springer Science & Business Media. This book was released on 2007-08-16 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This will be a required acquisition text for academic libraries. More than ten years after its discovery, still relatively little is known about the top quark, the heaviest known elementary particle. This extensive survey summarizes and reviews top-quark physics based on the precision measurements at the Fermilab Tevatron Collider, as well as examining in detail the sensitivity of these experiments to new physics. Finally, the author provides an overview of top quark physics at the Large Hadron Collider.
Download or read book Top Quark Pair Production Cross Section at the Tevatron written by and published by . This book was released on 2008 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: Top quark pair production cross section has been measured at the Tevatron by CDF and D0 collaborations using different channels and methods, in order to test standard model predictions, and to search for new physics hints affecting the t{bar t} production mechanism or decay. Measurements are carried out with an integrated luminosity of 1.0 to 2.0 fb−1, and are found to be consistent with standard model expectations.
Download or read book Measurements and Searches with Top Quarks written by and published by . This book was released on 2008 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1995 the last missing member of the known families of quarks, the top quark, was discovered by the CDF and D0 experiments at the Tevatron, a proton-antiproton collider at Fermilab near Chicago. Until today, the Tevatron is the only place where top quarks can be produced. The determination of top quark production and properties is crucial to understand the Standard Model of particle physics and beyond. The most striking property of the top quark is its mass--of the order of the mass of a gold atom and close to the electroweak scale--making the top quark not only interesting in itself but also as a window to new physics. Due to the high mass, much higher than of any other known fermion, it is expected that the top quark plays an important role in electroweak symmetry breaking, which is the most prominent candidate to explain the mass of particles. In the Standard Model, electroweak symmetry breaking is induced by one Higgs field, producing one additional physical particle, the Higgs boson. Although various searches have been performed, for example at the Large Electron Positron Collider (LEP), no evidence for the Higgs boson could yet be found in any experiment. At the Tevatron, multiple searches for the last missing particle of the Standard Model are ongoing with ever higher statistics and improved analysis techniques. The exclusion or verification of the Higgs boson can only be achieved by combining many techniques and many final states and production mechanisms. As part of this thesis, the search for Higgs bosons produced in association with a top quark pair (t{bar t}H) has been performed. This channel is especially interesting for the understanding of the coupling between Higgs and the top quark. Even though the Standard Model Higgs boson is an attractive candidate, there is no reason to believe that the electroweak symmetry breaking is induced by only one Higgs field. In many models more than one Higgs boson are expected to exist, opening even more channels to search for charged or neutral Higgs bosons. Depending on its mass, the charged Higgs boson is expected to decay either into top quarks or be the decay product of a top quark. For masses below the top quark mass, the top decay into a charged Higgs boson and a b quark can occur at a certain rate, additionally to the decays into W bosons and a b quark. The different decays of W and charged Higgs bosons can lead to deviations of the observed final number of events in certain final states with respect to the Standard Model expectation. A global search for charged Higgs bosons in top quark pair events is presented in this thesis, resulting in the most stringent limits to-date. Besides the decay of top quarks into charged Higgs or W bosons, new physics can also show up in the quark part of the decay. While in the Standard Model the top quark decays with a rate of about 100% into a W boson and a b quark, there are models where the top quark can decay into a W boson and a non-b quark. The ratio of branching fractions in which the top quark decays into a b quark over the branching fractions in which the top quark decays into all quarks is measured as part of this thesis, yielding the most precise measurement today. Furthermore, the Standard Model top quark pair production cross section is essential to be known precisely since the top quark pair production is the main background for t{bar t}H production and many other Higgs and beyond the Standard Model searches. However, not only the search or the test of the Standard Model itself make the precise measurement of the top quark pair production cross section interesting. As the cross section is calculated with high accuracy in perturbative QCD, a comparison of the measurement to the theory expectation yields the possibility to extract the top quark mass from the cross section measurement. Although many dedicated techniques exist to measure the top quark mass, the extraction from the cross section represents an important complementary measurement. The latter is briefly discussed in this thesis and compared to direct top mass measurements. The goal of this thesis is the improved understanding of the top quark sector and its use as a window to new physics. Techniques are extended and developed to measure the top quark pair production cross section simultaneously with the ratio of branching fractions, the t{bar t}H cross section or the rate with which top quarks decay into charged Higgs bosons. Some of the results are then taken to extract more information. The cross section measurement is used to extract the top quark mass, and the ratio of the top quark pair production cross sections in different final states, yielding a limit on non-Standard Model top quark decays.
Download or read book Top Quark Pair Production Near Threshold written by Y. Sumino and published by . This book was released on 1991 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Top Quark Pair Production Close to Threshold written by A. H. Hoang and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement of the Top Quark Pair Production Cross Section in Proton proton Collisions at sqrt s written by and published by . This book was released on 2015 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: The top quark pair production cross section is measured for the first time in proton-proton collisions at √s= 13 TeV by theCMS experiment at the CERN LHC, using data corresponding to an integrated luminosity of 42 pb-1. The measurement is performed by analyzing events with at least one electron and one muon of opposite charge, and at least two jets. We then measured the cross section and found that was 769 ± 60 (stat) ± 55 (syst) ± 92 (lumi) pb, in agreement with the expectation from the standard model.
