Download or read book Tools for S C02 Cycle Analysis and the Cycle s Applicability to SFRs written by Alexander Rockwell Ludington and published by . This book was released on 2009 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Cont.) It has been determined that the S-C02 recompression cycle can provide efficiency benefits over conventional Rankine cycles for SFRs with core outlet temperatures at or above 510 oC. With the S-C02 cycle, SFRs can achieve thermal efficiencies of ~42 %.
Download or read book Fundamentals and Applications of Supercritical Carbon Dioxide SCO2 Based Power Cycles written by Klaus Brun and published by Woodhead Publishing. This book was released on 2017-01-09 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Applications of Supercritical Carbon Dioxide (SCO2) Based Power Cycles aims to provide engineers and researchers with an authoritative overview of research and technology in this area. Part One introduces the technology and reviews the properties of SCO2 relevant to power cycles. Other sections of the book address components for SCO2 power cycles, such as turbomachinery expanders, compressors, recuperators, and design challenges, such as the need for high-temperature materials. Chapters on key applications, including waste heat, nuclear power, fossil energy, geothermal and concentrated solar power are also included. The final section addresses major international research programs. Readers will learn about the attractive features of SC02 power cycles, which include a lower capital cost potential than the traditional cycle, and the compounding performance benefits from a more efficient thermodynamic cycle on balance of plant requirements, fuel use, and emissions. Represents the first book to focus exclusively on SC02 power cycles Contains detailed coverage of cycle fundamentals, key components, and design challenges Addresses the wide range of applications of SC02 power cycles, from more efficient electricity generation, to ship propulsion
Download or read book Heat Transfer written by Aziz Belmiloudi and published by BoD – Books on Demand. This book was released on 2011-01-28 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades there has been a prolific increase in research and development in area of heat transfer, heat exchangers and their associated technologies. This book is a collection of current research in the above mentioned areas and discusses experimental, theoretical and calculation approaches and industrial utilizations with modern ideas and methods to study heat transfer for single and multiphase systems. The topics considered include various basic concepts of heat transfer, the fundamental modes of heat transfer (namely conduction, convection and radiation), thermophysical properties, condensation, boiling, freezing, innovative experiments, measurement analysis, theoretical models and simulations, with many real-world problems and important modern applications. The book is divided in four sections : "Heat Transfer in Micro Systems", "Boiling, Freezing and Condensation Heat Transfer", "Heat Transfer and its Assessment", "Heat Transfer Calculations", and each section discusses a wide variety of techniques, methods and applications in accordance with the subjects. The combination of theoretical and experimental investigations with many important practical applications of current interest will make this book of interest to researchers, scientists, engineers and graduate students, who make use of experimental and theoretical investigations, assessment and enhancement techniques in this multidisciplinary field as well as to researchers in mathematical modelling, computer simulations and information sciences, who make use of experimental and theoretical investigations as a means of critical assessment of models and results derived from advanced numerical simulations and improvement of the developed models and numerical methods.
Download or read book Advanced Power Generation Systems written by Ibrahim Dincer and published by Academic Press. This book was released on 2014-07-15 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Power Generation Systems examines the full range of advanced multiple output thermodynamic cycles that can enable more sustainable and efficient power production from traditional methods, as well as driving the significant gains available from renewable sources. These advanced cycles can harness the by-products of one power generation effort, such as electricity production, to simultaneously create additional energy outputs, such as heat or refrigeration. Gas turbine-based, and industrial waste heat recovery-based combined, cogeneration, and trigeneration cycles are considered in depth, along with Syngas combustion engines, hybrid SOFC/gas turbine engines, and other thermodynamically efficient and environmentally conscious generation technologies. The uses of solar power, biomass, hydrogen, and fuel cells in advanced power generation are considered, within both hybrid and dedicated systems. The detailed energy and exergy analysis of each type of system provided by globally recognized author Dr. Ibrahim Dincer will inform effective and efficient design choices, while emphasizing the pivotal role of new methodologies and models for performance assessment of existing systems. This unique resource gathers information from thermodynamics, fluid mechanics, heat transfer, and energy system design to provide a single-source guide to solving practical power engineering problems. The only complete source of info on the whole array of multiple output thermodynamic cycles, covering all the design options for environmentally-conscious combined production of electric power, heat, and refrigeration Offers crucial instruction on realizing more efficiency in traditional power generation systems, and on implementing renewable technologies, including solar, hydrogen, fuel cells, and biomass Each cycle description clarified through schematic diagrams, and linked to sustainable development scenarios through detailed energy, exergy, and efficiency analyses Case studies and examples demonstrate how novel systems and performance assessment methods function in practice
Download or read book Handbook of Generation IV Nuclear Reactors written by Igor Pioro and published by Woodhead Publishing. This book was released on 2022-12-07 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Generation IV Nuclear Reactors, Second Edition is a fully revised and updated comprehensive resource on the latest research and advances in generation IV nuclear reactor concepts. Editor Igor Pioro and his team of expert contributors have updated every chapter to reflect advances in the field since the first edition published in 2016. The book teaches the reader about available technologies, future prospects and the feasibility of each concept presented, equipping them users with a strong skillset which they can apply to their own work and research. Provides a fully updated, revised and comprehensive handbook dedicated entirely to generation IV nuclear reactors Includes new trends and developments since the first publication, as well as brand new case studies and appendices Covers the latest research, developments and design information surrounding generation IV nuclear reactors
Download or read book Science Abstracts written by and published by . This book was released on 1993 with total page 2316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Global Waves of Debt written by M. Ayhan Kose and published by World Bank Publications. This book was released on 2021-03-03 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global economy has experienced four waves of rapid debt accumulation over the past 50 years. The first three debt waves ended with financial crises in many emerging market and developing economies. During the current wave, which started in 2010, the increase in debt in these economies has already been larger, faster, and broader-based than in the previous three waves. Current low interest rates mitigate some of the risks associated with high debt. However, emerging market and developing economies are also confronted by weak growth prospects, mounting vulnerabilities, and elevated global risks. A menu of policy options is available to reduce the likelihood that the current debt wave will end in crisis and, if crises do take place, will alleviate their impact.
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1978-03 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermodynamic Models for Industrial Applications written by Georgios M. Kontogeorgis and published by John Wiley & Sons. This book was released on 2009-12-01 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using an applications perspective Thermodynamic Models for Industrial Applications provides a unified framework for the development of various thermodynamic models, ranging from the classical models to some of the most advanced ones. Among these are the Cubic Plus Association Equation of State (CPA EoS) and the Perturbed Chain Statistical Association Fluid Theory (PC-SAFT). These two advanced models are already in widespread use in industry and academia, especially within the oil and gas, chemical and polymer industries. Presenting both classical models such as the Cubic Equations of State and more advanced models such as the CPA, this book provides the critical starting point for choosing the most appropriate calculation method for accurate process simulations. Written by two of the developers of these models, Thermodynamic Models for Industrial Applications emphasizes model selection and model development and includes a useful “which model for which application” guide. It also covers industrial requirements as well as discusses the challenges of thermodynamics in the 21st Century.
Download or read book Improving Fuel Cycle Design and Safety Characteristics of a Gas Cooled Fast Reactor written by Willem Frederik Geert van Rooijen and published by IOS Press. This book was released on 2006 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Generation IV Forum is an international nuclear energy research initiative aimed at developing the fourth generation of nuclear reactors, envisaged to enter service halfway the 21st century. One of the Generation IV reactor systems is the Gas Cooled Fast Reactor (GCFR), the subject of study in this thesis. The Generation IV reactor concepts should improve all aspects of nuclear power generation. Within Generation IV, the GCFR concept specifically targets sustainability of nuclear power generation. The Gas Cooled Fast Reactor core power density is high in comparison to other gas cooled reactor concepts. Like all nuclear reactors, the GCFR produces decay heat after shut down, which has to be transported out of the reactor under all circumstances. The layout of the primary system therefore focuses on using natural convection Decay Heat Removal (DHR) where possible, with a large coolant fraction in the core to reduce friction losses.
Download or read book The Technological and Economic Future of Nuclear Power written by Reinhard Haas and published by Springer. This book was released on 2019-01-01 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book discusses the eroding economics of nuclear power for electricity generation as well as technical, legal, and political acceptance issues. The use of nuclear power for electricity generation is still a heavily disputed issue. Aside from technical risks, safety issues, and the unsolved problem of nuclear waste disposal, the economic performance is currently a major barrier. In recent years, the costs have skyrocketed especially in the European countries and North America. At the same time, the costs of alternatives such as photovoltaics and wind power have significantly decreased. Contents History and Current Status of the World Nuclear Industry The Dramatic Decrease of the Economics of Nuclear Power Nuclear Policy in the EU The Legacy of Csernobyl and Fukushima Nuclear Waste and Decommissioning of Nuclear Power Plants Alternatives: Heading Towards Sustainable Electricity Systems Target Groups Researchers and students in the fields of political, economic and technical sciences Energy (policy) experts, nuclear energy experts and practitioners, economists, engineers, consultants, civil society organizations The Editors Prof. Dr. Reinhard Haas is University Professor of energy economics at the Institute of Energy Systems and Electric Drives at Technische Universität Wien, Austria. PD Dr. Lutz Mez is Associate Professor at the Department for Political and Social Sciences of Freie Universität Berlin, Germany. PD Dr. Amela Ajanovic is a senior researcher and lecturer at the Institute of Energy Systems and Electrical Drives at Technische Universität Wien, Austria.--
Download or read book Glosario Del Banco Mundial written by World Bank and published by World Bank Publications. This book was released on 1996 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of the World Bank has been revised and expanded by the Terminology Unit in the Languages Services Division of the World Bank in collaboration with the English, Spanish, and French Translation Sections. The Glossary is intended to assist the Bank's translators and interpreters, other Bank staff using French and Spanish in their work, and free-lance translator's and interpreters employed by the Bank. For this reason, the Glossary contains not only financial and economic terminology and terms relating to the Bank's procedures and practices, but also terms that frequently occur in Bank documents, and others for which the Bank has a preferred equivalent. Although many of these terms, relating to such fields as agriculture, education, energy, housing, law, technology, and transportation, could be found in other sources, they have been assembled here for ease of reference. A list of acronyms occurring frequently in Bank texts (the terms to which they refer being found in the Glossary) and a list of international, regional, and national organizations will be found at the end of the Glossary.
Download or read book The Future of Nuclear Fuel Cycle written by and published by . This book was released on 2011 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In this analysis we have presented a method that provides insight into future fuel cycle alternatives by clarifying the complexity of choosing an appropriate fuel cycle in the context of the distribution of burdens and benefits between generations. The current nuclear power deployment practices, together with three future fuel cycles were assessed."--Page 227.
Download or read book Status of Fast Reactor Research and Technology Development written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Based on a recommendation from the Technical Working Group on Fast Reactors, this publication is a regular update of previous publications on fast reactor technology. The publication provides comprehensive and detailed information on the technology of fast neutron reactors. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors. The main issues of discussion are experience in design, construction, operation and decommissioning, various areas of research and development, engineering, safety and national strategies, and public acceptance of fast reactors. In the summary the reader will find national strategies, international initiatives on innovative (i.e. Generation IV) systems and an assessment of public acceptance as related to fast reactors."--Résumé de l'éditeur.
Download or read book Opportunities for Cogeneration with Nuclear Energy written by International Atomic Energy Agency and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents a comprehensive overview of various aspects relating to the application of cogeneration with nuclear energy, which may offer advantages such as increased efficiency, better cost effectiveness, and reduced environmental impact. The publication provides details on experiences, best practices and expectations for the foreseeable future of cogeneration with nuclear power technology and serves as a guide that supports newcomer countries. It includes information on systems and applications in various sectors, feasibility aspects, technical and economic details, and case studies.
Download or read book United Nations Resource Management System written by United Nations Publications and published by . This book was released on 2021-07-06 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United Nations Resource Management System (UNRMS) is designed as a unifying framework for the integrated management of resources.
