Download or read book Tools for High Performance Computing 2012 written by Alexey Cheptsov and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest advances in the High Performance Computing hardware have significantly raised the level of available compute performance. At the same time, the growing hardware capabilities of modern supercomputing architectures have caused an increasing complexity of the parallel application development. Despite numerous efforts to improve and simplify parallel programming, there is still a lot of manual debugging and tuning work required. This process is supported by special software tools, facilitating debugging, performance analysis, and optimization and thus making a major contribution to the development of robust and efficient parallel software. This book introduces a selection of the tools, which were presented and discussed at the 6th International Parallel Tools Workshop, held in Stuttgart, Germany, 25-26 September 2012.
Download or read book Tools for High Performance Computing 2017 written by Christoph Niethammer and published by Springer. This book was released on 2019-02-14 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 11th International Parallel Tools Workshop, a forum to discuss the latest advances in parallel tools, held September 11-12, 2017 in Dresden, Germany. High-performance computing plays an increasingly important role for numerical simulation and modeling in academic and industrial research. At the same time, using large-scale parallel systems efficiently is becoming more difficult. A number of tools addressing parallel program development and analysis has emerged from the high-performance computing community over the last decade, and what may have started as a collection of a small helper scripts has now matured into production-grade frameworks. Powerful user interfaces and an extensive body of documentation together create a user-friendly environment for parallel tools.
Download or read book Tools for High Performance Computing 2016 written by Christoph Niethammer and published by Springer. This book was released on 2017-05-06 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 10th International Parallel Tools Workshop, held October 4-5, 2016 in Stuttgart, Germany – a forum to discuss the latest advances in parallel tools. High-performance computing plays an increasingly important role for numerical simulation and modelling in academic and industrial research. At the same time, using large-scale parallel systems efficiently is becoming more difficult. A number of tools addressing parallel program development and analysis have emerged from the high-performance computing community over the last decade, and what may have started as collection of small helper script has now matured to production-grade frameworks. Powerful user interfaces and an extensive body of documentation allow easy usage by non-specialists.
Download or read book Tools for High Performance Computing 2015 written by Andreas Knüpfer and published by Springer. This book was released on 2016-07-27 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Computing (HPC) remains a driver that offers huge potentials and benefits for science and society. However, a profound understanding of the computational matters and specialized software is needed to arrive at effective and efficient simulations. Dedicated software tools are important parts of the HPC software landscape, and support application developers. Even though a tool is by definition not a part of an application, but rather a supplemental piece of software, it can make a fundamental difference during the development of an application. Such tools aid application developers in the context of debugging, performance analysis, and code optimization, and therefore make a major contribution to the development of robust and efficient parallel software. This book introduces a selection of the tools presented and discussed at the 9th International Parallel Tools Workshop held in Dresden, Germany, September 2-3, 2015, which offered an established forum for discussing the latest advances in parallel tools.
Download or read book Tools for High Performance Computing 2018 2019 written by Hartmut Mix and published by Springer Nature. This book was released on 2021-05-22 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 12th International Parallel Tools Workshop, held in Stuttgart, Germany, during September 17-18, 2018, and of the 13th International Parallel Tools Workshop, held in Dresden, Germany, during September 2-3, 2019. The workshops are a forum to discuss the latest advances in parallel tools for high-performance computing. High-performance computing plays an increasingly important role for numerical simulation and modeling in academic and industrial research. At the same time, using large-scale parallel systems efficiently is becoming more difficult. A number of tools addressing parallel program development and analysis has emerged from the high-performance computing community over the last decade, and what may have started as a collection of a small helper scripts has now matured into production-grade frameworks. Powerful user interfaces and an extensive body of documentation together create a user-friendly environment for parallel tools.
Download or read book Tools for High Performance Computing 2013 written by Andreas Knüpfer and published by Springer. This book was released on 2014-10-06 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current advances in High Performance Computing (HPC) increasingly impact efficient software development workflows. Programmers for HPC applications need to consider trends such as increased core counts, multiple levels of parallelism, reduced memory per core, and I/O system challenges in order to derive well performing and highly scalable codes. At the same time, the increasing complexity adds further sources of program defects. While novel programming paradigms and advanced system libraries provide solutions for some of these challenges, appropriate supporting tools are indispensable. Such tools aid application developers in debugging, performance analysis, or code optimization and therefore make a major contribution to the development of robust and efficient parallel software. This book introduces a selection of the tools presented and discussed at the 7th International Parallel Tools Workshop, held in Dresden, Germany, September 3-4, 2013.
Download or read book Tools for High Performance Computing 2014 written by Christoph Niethammer and published by Springer. This book was released on 2015-06-02 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation and modelling using High Performance Computing has evolved into an established technique in academic and industrial research. At the same time, the High Performance Computing infrastructure is becoming ever more complex. For instance, most of the current top systems around the world use thousands of nodes in which classical CPUs are combined with accelerator cards in order to enhance their compute power and energy efficiency. This complexity can only be mastered with adequate development and optimization tools. Key topics addressed by these tools include parallelization on heterogeneous systems, performance optimization for CPUs and accelerators, debugging of increasingly complex scientific applications and optimization of energy usage in the spirit of green IT. This book represents the proceedings of the 8th International Parallel Tools Workshop, held October 1-2, 2014 in Stuttgart, Germany – which is a forum to discuss the latest advancements in the parallel tools.
Download or read book Tools for High Performance Computing written by Rainer Keller and published by Springer Science & Business Media. This book was released on 2008-06-03 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing software for current and especially for future architectures will require knowledge about parallel programming techniques of applications and library p- grammers. Multi-core processors are already available today, and processors with a dozen and more cores are on the horizon. The major driving force in hardware development, the game industry, has - ready shown interest in using parallel programming paradigms, such as OpenMP for further developments. Therefore developers have to be supported in the even more complex task of programming for these new architectures. HLRS has a long-lasting tradition of providing its user community with the most up-to-date software tools. Additionally, important research and development projects are worked on at the center: among the software packages developed are the MPI correctness checker Marmot, the OpenMP validation suite and the M- implementations PACX-MPI and Open MPI. All of these software packages are - ing extended in the context of German and European community research projects, such as ParMA, the InterActive European Grid (I2G) project and the German C- laborative Research Center (Sonderforschungsbereich 716). Furthermore, ind- trial collaborations, i.e. with Intel and Microsoft allow HLRS to get its software production-grade ready. In April 2007, a European project on Parallel Programming for Multi-core - chitectures, in short ParMA was launched, with a major focus on providing and developing tools for parallel programming.
Download or read book Introduction to High Performance Computing for Scientists and Engineers written by Georg Hager and published by CRC Press. This book was released on 2010-07-02 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by high performance computing (HPC) experts, Introduction to High Performance Computing for Scientists and Engineers provides a solid introduction to current mainstream computer architecture, dominant parallel programming models, and useful optimization strategies for scientific HPC. From working in a scientific computing center, the author
Download or read book Tools for High Performance Computing 2011 written by Holger Brunst and published by Springer Science & Business Media. This book was released on 2012-09-24 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the 5th International Workshop on Parallel Tools for High Performance Computing provide an overview on supportive software tools and environments in the fields of System Management, Parallel Debugging and Performance Analysis. In the pursuit to maintain exponential growth for the performance of high performance computers the HPC community is currently targeting Exascale Systems. The initial planning for Exascale already started when the first Petaflop system was delivered. Many challenges need to be addressed to reach the necessary performance. Scalability, energy efficiency and fault-tolerance need to be increased by orders of magnitude. The goal can only be achieved when advanced hardware is combined with a suitable software stack. In fact, the importance of software is rapidly growing. As a result, many international projects focus on the necessary software.
Download or read book Tools for High Performance Computing 2011 written by Holger Brunst and published by Springer Science & Business Media. This book was released on 2012-09-21 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the 5th International Workshop on Parallel Tools for High Performance Computing provide an overview on supportive software tools and environments in the fields of System Management, Parallel Debugging and Performance Analysis. In the pursuit to maintain exponential growth for the performance of high performance computers the HPC community is currently targeting Exascale Systems. The initial planning for Exascale already started when the first Petaflop system was delivered. Many challenges need to be addressed to reach the necessary performance. Scalability, energy efficiency and fault-tolerance need to be increased by orders of magnitude. The goal can only be achieved when advanced hardware is combined with a suitable software stack. In fact, the importance of software is rapidly growing. As a result, many international projects focus on the necessary software.
Download or read book High Performance Computing for Computational Science VECPAR 2012 written by Michel Dayde and published by Springer. This book was released on 2013-05-24 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 10th International Conference on High Performance Computing for Computational Science, VECPAR 2012, held in Kope, Japan, in July 2012. The 28 papers presented together with 7 invited talks were carefully selected during two rounds of reviewing and revision. The papers are organized in topical sections on CPU computing, applications, finite element method from various viewpoints, cloud and visualization performance, method and tools for advanced scientific computing, algorithms and data analysis, parallel iterative solvers on multicore architectures.
Download or read book Tools and Techniques for High Performance Computing written by Guido Juckeland and published by Springer Nature. This book was released on 2020-03-25 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of 3 workshops co-located with International Conference for High Performance Computing, Networking, Storage, and Analysis, SC19, held in Denver, CO, USA, in November 2019. The 12 full papers presented in this proceedings feature the outcome of the 6th Annual Workshop on HPC User Support Tools, HUST 2019, International Workshop on Software Engineering for HPC-Enabled Research, SE-HER 2019, and Third Workshop on Interactive High-Performance Computing, WIHPC 2019.
Download or read book High Performance Computing written by Michela Taufer and published by Springer. This book was released on 2016-10-05 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from 7 workshops that were held in conjunction with the ISC High Performance 2016 conference in Frankfurt, Germany, in June 2016. The 45 papers presented in this volume were carefully reviewed and selected for inclusion in this book. They stem from the following workshops: Workshop on Exascale Multi/Many Core Computing Systems, E-MuCoCoS; Second International Workshop on Communication Architectures at Extreme Scale, ExaComm; HPC I/O in the Data Center Workshop, HPC-IODC; International Workshop on OpenPOWER for HPC, IWOPH; Workshop on the Application Performance on Intel Xeon Phi – Being Prepared for KNL and Beyond, IXPUG; Workshop on Performance and Scalability of Storage Systems, WOPSSS; and International Workshop on Performance Portable Programming Models for Accelerators, P3MA.
Download or read book High Performance Computing written by Rio Yokota and published by Springer. This book was released on 2019-01-24 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of 13 workshops held at the 33rd International ISC High Performance 2018 Conference, in Frankfurt, Germany, in June 2018: HPC I/O in the Data Center, HPC-IODC 2018; Workshop on Performance and Scalability of Storage Systems, WOPSSS 2018; 13th Workshop on Virtualization in High-Performance Cloud Computing, VHPC 2018; Third International Workshop on In Situ Visualization, WOIV 2018; 4th International Workshop on Communication Architectures for HPC, Big Data, Deep Learning and Clouds at Extreme Scale, ExaComm 2018; International Workshop on OpenPOWER for HPC, IWOPH 2018; IXPUG Workshop: Many-Core Computing on Intel Processors; Workshop on Sustainable Ultrascale Computing Systems; Approximate and Transprecision Computing on Emerging Technologies, ATCET 2018; First Workshop on the Convergence of Large-Scale Simulation and Artificial Intelligence; Third Workshop for Open Source Supercomputing, OpenSuCo 2018; First Workshop on Interactive High-Performance Computing; Workshop on Performance Portable Programming Models for Accelerators, P^3MA 2018. The 53 full papers included in this volume were carefully reviewed and selected from 80 submissions. They cover all aspects of research, development, and application of large-scale, high performance experimental and commercial systems. Topics include HPC computer architecture and hardware; programming models, system software, and applications; solutions for heterogeneity, reliability, power efficiency of systems; virtualization and containerized environments; big data and cloud computing; and artificial intelligence.
Download or read book Parallel Computing Technology Trends written by I. Foster and published by IOS Press. This book was released on 2020-03-25 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: The year 2019 marked four decades of cluster computing, a history that began in 1979 when the first cluster systems using Components Off The Shelf (COTS) became operational. This achievement resulted in a rapidly growing interest in affordable parallel computing for solving compute intensive and large scale problems. It also directly lead to the founding of the Parco conference series. Starting in 1983, the International Conference on Parallel Computing, ParCo, has long been a leading venue for discussions of important developments, applications, and future trends in cluster computing, parallel computing, and high-performance computing. ParCo2019, held in Prague, Czech Republic, from 10 – 13 September 2019, was no exception. Its papers, invited talks, and specialized mini-symposia addressed cutting-edge topics in computer architectures, programming methods for specialized devices such as field programmable gate arrays (FPGAs) and graphical processing units (GPUs), innovative applications of parallel computers, approaches to reproducibility in parallel computations, and other relevant areas. This book presents the proceedings of ParCo2019, with the goal of making the many fascinating topics discussed at the meeting accessible to a broader audience. The proceedings contains 57 contributions in total, all of which have been peer-reviewed after their presentation. These papers give a wide ranging overview of the current status of research, developments, and applications in parallel computing.
Download or read book Tools for High Performance Computing 2009 written by Matthias S. Müller and published by Springer Science & Business Media. This book was released on 2010-05-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: As more and more hardware platforms support parallelism, parallel programming is gaining momentum. Applications can only leverage the performance of multi-core processors or graphics processing units if they are able to split a problem into smaller ones that can be solved in parallel. The challenges emerging from the development of parallel applications have led to the development of a great number of tools for debugging, performance analysis and other tasks. The proceedings of the 3rd International Workshop on Parallel Tools for High Performance Computing provide a technical overview in order to help engineers, developers and computer scientists decide which tools are best suited to enhancing their current development processes.
