Download or read book Tolerancing Its Distribution Analysis and Synthesis written by Woo-Jong Lee, Tony C. Woo and published by . This book was released on 1987 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer aided Tolerancing written by Fumihiko Kimura and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and practice of tolerances are very important for designing and manufacturing engineering artifacts on a rational basis. Tolerance specifies a degree of "discrepancy" between an idealized object and its physical realization. Such discrepancy inevitably comes into our product realization processes because of practical cost consideration or our inability to fully control manufacturing processes. Major product and production characteristics which are affected by tolerances are product quality and cost. For achieving high precision machines tight tolerance specification is necessary, but this will normally increase product cost. In order to optimally compromise the conflicting requirements of quality and cost, it is essential to take into account of the total product life cycle throughout product planning, design, manufacturing, maintenance and recycling. For example, in order to construct durable products under severe working conditions, low sensitivity of product functionality with respect to tolerances is required. In future, re-use of components or parts will become important, and tolerance synthesis with respect to this aspect will be an interesting future research topics.
Download or read book Statistics in Industry written by Ravindra Khattree and published by Gulf Professional Publishing. This book was released on 2003-07-18 with total page 1222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents an exposition of topics in industrial statistics. It serves as a reference for researchers in industrial statistics/industrial engineering and a source of information for practicing statisticians/industrial engineers. A variety of topics in the areas of industrial process monitoring, industrial experimentation, industrial modelling and data analysis are covered and are authored by leading researchers or practitioners in the particular specialized topic. Targeting the audiences of researchers in academia as well as practitioners and consultants in industry, the book provides comprehensive accounts of the relevant topics. In addition, whenever applicable ample data analytic illustrations are provided with the help of real world data.
Download or read book Operations Management and Systems Engineering written by Anish Sachdeva and published by Springer. This book was released on 2019-04-08 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Production and Industrial Engineering (CPIE) 2018. The book focuses on the latest developments in the domain of operations management and systems engineering, and presents analytical models, case studies, and simulation approaches relevant to a wide variety of systems engineering problems. Topics such as decision sciences, human factors and ergonomics, transport and supply chain management, manufacturing design, operations research, waste management, modeling and simulation, reliability and maintenance, and sustainability in operations and manufacturing are discussed in this book. The contents of this book will be useful to academics, researchers and practitioners working in the field of systems engineering and operations management.
Download or read book Optimization in Industry written by and published by . This book was released on 1997 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geometric Design Tolerancing Theories Standards and Applications written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of proper geometric dimensioning and tolerancing as a means of expressing the designer's functional intent and controlling the inevitable geometric and dimensional variations of mechanical parts and assemblies, is becoming well recognized. The research efforts and innovations in the field of tolerancing design, the development of supporting tools, techniques and algorithms, and the significant advances in computing software and hardware all have contributed to its recognition as a viable area of serious scholarly contributions. The field of tolerancing design is successfully making the transition to maturity where deeper insights and sound theories are being developed to offer explanations, and reliable implementations are introduced to provide solutions. Machine designers realized very early that manufacturing processes do not produce the nominal dimensions of designed parts. The notion of associating a lower and an upper limit, referred to as tolerances, with each dimen sion was introduced. Tolerances were specified to ensure the proper function of mating features. Fits of mating features included clearances, location fits, and interference fits, with various sub-grades in each category assigned a tolerance value depending on the nominal size of the mating features. During the inspection process, a part is rejected if a dimension fell outside the specified range. As the accuracy requirements in assemblies became tighter, designers had to consider other critical dimensions and allocate tolerances to them in order to ensure the assembly's functionality.
Download or read book Product Design and Testing for Automotive Engineering Volume II written by Young J. Chiang and published by SAE International. This book was released on 2024-09-17 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure modes and effects analysis (FMEA); Reliability; Product Development; Design Process; Test Procedures "Explore Product Design and Testing for Automotive Engineering: Volume II, an essential guide reshaping vehicle manufacturing with unprecedented reliability. As part of SAE International’s DOE for Product Reliability Growth series, this practical resource introduces cutting-edge methodologies crucial for predicting and improving product reliability in an era of automotive electrification. The book navigates statistical tolerance design, showcasing how variability in part fabrication and assembly can enhance reliability and sustainability. Key topics include: - Statistical tolerance design's impact on manufacturing and material selection, focusing on non-normal distributions' effects on product assembly and cost. Methods like maximum likelihood estimators and Monte Carlo simulations are used for assembly strategy synthesis. - Reliability DOEs using log-location-scale distributions to estimate lifetimes of non-normally distributed components, especially in accelerated life testing. It covers transformations optimizing parts and system designs under the lognormal distribution. - Weibull distribution (DOE-W) for characterizing lifetimes affected by various failure modes, detailing parameter assessment methods and real-world applications. The book also introduces reliability design of experiments based on the exponential distribution (DOE-E). - Importance of predicting lifecycles and enhancing reliability through qualitative and stepwise accelerated life tests. Integration of physics of failure with statistical methods like Weibull statistics and lognormal approximation enhances analysis credibility. - Inferential mechanisms such as the Arrhenius and Eyring models in predicting automotive component lifecycles, refining product life prediction based on reliability DOEs. Whether you're an engineer, researcher, or automotive professional, this book equips you to navigate reliability engineering confidently. Revolutionize your approach to product design and testing with Product Design and Testing for Automotive Engineering, your definitive companion in shaping the future of automotive reliability." (ISBN 9781468607703 ISBN 9781468607697 ISBN 9781468607727 DOI 10.4271/9781468607697)
Download or read book Global Consistency of Tolerances written by Fred van Houten and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected contributions from the 6th CIRP International Seminar on Computer-Aided Tolerancing, which was held on 22-24 March, 1999, at the University of Twente, Enschede, The Netherlands. This volume presents the theory and application of consistent tolerancing. Until recently CADCAM systems did not even address the issue of tolerances and focused purely on nominal geometry. Therefore, CAD data was only of limited use for the downstream processes. The latest generation of CADCAM systems incorporates functionality for tolerance specification. However, the lack of consistency in existing tolerancing standards and everyday tolerancing practice still lead to ill-defined products, excessive manufacturing costs and unexpected failures. Research and improvement of education in tolerancing are hot items today. Global Consistency of Tolerances gives an excellent overview of the recent developments in the field of Computer-Aided Tolerancing, including such topics as tolerance specification; tolerance analysis; tolerance synthesis; tolerance representation; geometric product specification; functional product analysis; statistical tolerancing; education of tolerancing; computational metrology; tolerancing standards; and industrial applications and CAT systems. This book is well suited to users of new generation CADCAM systems who want to use the available tolerancing possibilities properly. It can also be used as a starting point for research activities.
Download or read book Geometric Programming written by Carlton Scott and published by . This book was released on 2002 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Demonstration of a Process Control Methodology Using Multiple Regression and Tolerance Analysis written by Richard J. Gerth and published by . This book was released on 1992 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Design of Experiments for Automotive Engineering Volume I written by Young J. Chiang and published by SAE International. This book was released on 2023-11-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a world where innovation and sustainability are paramount, Fundamentals of Design of Experiments for Automotive Engineering: Volume I serves as a definitive guide to harnessing the power of statistical thinking in product development. As first of four volumes in SAE International’s DOE for Product Reliability Growth series, this book presents a practical, application-focused approach by emphasizing DOE as a dynamic tool for automotive engineers. It showcases real-world examples, demonstrating how process improvements and system optimizations can significantly enhance product reliability. The author, Yung Chiang, leverages extensive product development expertise to present a comprehensive process that ensures product performance and reliability throughout its entire lifecycle. Whether individuals are involved in research, design, testing, manufacturing, or marketing, this essential reference equips them with the skills needed to excel in their respective roles. This book explores the potential of Reliability and Sustainability with DOE, featuring the following topics: - Fundamental prerequisites for deploying DOE: Product reliability processes, measurement uncertainty, failure analysis, and design for reliability. - Full factorial design 2K: A system identification tool for relating objectives to factors and understanding main and interactive effects. - Fractional factorial design 2RK-P: Ideal for identifying main effects and 2-factor interactions. - General fractional factorial design LK-P: Systematically identification of significant inputs and analysis of nonlinear behaviors. - Composite designs as response surface methods: Resolving interactions and optimizing decisions with limited factors. - Adapting to practical challenges with “short” DOE: Leveraging optimization schemes like D-optimality, and A-optimality for optimal results. Readers are encouraged not to allow product failures to hinder progress but to embrace the "statistical thinking" embedded in DOE. This book can illuminate the path to designing products that stand the test of time, resulting in satisfied customers and thriving businesses. (ISBN 9781468606027, ISBN 9781468606034, ISBN 9781468606041, DOI 10.4271/9781468606034)
Download or read book Design Fabrication and Economy of Welded Structures written by K Jarmai and published by Pearson Deutschland GmbH. This book was released on 2008-04 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings cover the fields of different materials and fatigue of welded joints, thin-walled structures, tubular structures, frames, plates and shells and also incorporate special optimization problems, fire and earthquake resistant design, special applications and applied mechanics, and thus provide an important reference for civil and mechanical engineers, architects, designers and fabricators. Proceedings cover the fields of different materials and fatigue of welded joints, thin-walled structures, tubular structures, frames, plates and shells Also incorporate special optimization problems, fire and earthquake resistant design, special applications and applied mechanics Provide an important reference for civil and mechanical engineers, architects, designers and fabricators
Download or read book Variation Stack up Analysis Using Monte Carlo Simulation for Manufacturing Process Control and Specification written by Byoung Ki Lee and published by . This book was released on 1993 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanotechnology for Abiotic Stress Tolerance and Management in Crop Plants written by Ramesh Namdeo Pudake and published by Elsevier. This book was released on 2024-03-13 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology for Abiotic Stress Tolerance and Management in Crop Plants reviews the most recent literature on the role of nanomaterials in achieving sustainability in crop production in stressful environments. This book explores the adverse conditions caused by abiotic stress to crop plants, and the methods by which these conditions can be potentially overcome through developments in nanoscience and nanotechnology. Abiotic stresses such as drought, salinity, temperature stress, excessive water, heavy metal stress, UV stress etc. are major factors which may adversely affect the growth, development, and yield of crops. While recent research for ways of overcoming the physiological and biochemical changes brought on by these stresses has focused on genetic engineering of plants, additional research continues into alternative strategies to develop stress tolerant crops, including the use of nanoscience and nanotechnology. Providing an in-depth summary of research on nanomaterials and nano-based devices for field monitoring of crops, this book will serve as an ideal reference for academics, professionals, researchers, and students working in the field of agriculture, nanotechnology, plant science, material science, and crop production. - Presents advancements in our understanding of molecular and physiological interactions between nanoparticles and crop plants - Includes figures and illustrations to help readers visualize and easily understand the role of nanomaterials - Serves as an ideal reference for those studying smart nanomaterials, biosensors, and nanodevices for real-time plant stress measurement
Download or read book Design Theory and Methodology DTM 94 written by T. K. Hight and published by . This book was released on 1994 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from the September 1994 conference, exploring subjects such as quality and tolerance, house of quality, robust and axiomatic design, paradoxes in design, abstractions in mechanical design, complexity and collaborative design, paradigms for design education, and recent design methods
Download or read book Diabetes Literature Index written by and published by . This book was released on 1975 with total page 1792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Technologies for Precision Assembly written by Svetan Ratchev and published by Springer Nature. This book was released on 2021-04-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book constitutes the refereed post-conference proceedings of the 9th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2020, held virtually in December 2020. The 16 revised full papers and 10 revised short papers presented together with 1 keynote paper were carefully reviewed and selected from numerous submissions. The papers address topics such as assembly design and planning; assembly operations; assembly cells and systems; human centred assembly; and assistance methods in assembly.
