Download or read book Tokamak Dust in ITER Safety Issues and R and D Supporting Dust Limits written by and published by . This book was released on 1998 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tokamak dust is an important contributor to the source term in ITER safety analyses. In this paper the authors present results of R and D at the INEEL to characterize tokamak dust, and which has been used to set safety limits on dust for ITER. They present the results of analysis of particulate collected from three operating tokamaks: DIII-D at General Atomics, TFTR at Princeton Plasma Physics Laboratory, and Alcator C-MOD at Massachusetts Institute of Technology, and analysis of particulate produced in SIRENS, a disruption simulator at North Carolina State University. Analyses done include characterization of particulate to produce particle size distributions, chemical analysis, and measurement of effective surface area. The safety limits on dust in ITER have evolved during the EDA as more data have become available. The safety limits specified in NSSR-2 envelope the majority of the data, and provide conservatism to account for the uncertainty in extrapolation of the data to ITER.
Download or read book Proceedings of the Thirteenth Topical Meeting on the Technology of Fusion Energy written by and published by . This book was released on 1998 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Science and Technology written by and published by . This book was released on 2002 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Cooperation for Enhancing Nuclear Safety Security Safeguards and Non proliferation written by Luciano Maiani and published by Springer Nature. This book was released on 2020-04-07 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book examines key aspects of international cooperation to enhance nuclear safety, security, safeguards, and nonproliferation, thereby assisting in development and maintenance of the verification regime and fostering progress toward a nuclear weapon-free world. Current challenges are discussed and attempts made to identify possible solutions and future improvements, considering scientific developments that have the potential to increase the effectiveness of implementation of international regimes, particularly in critical areas, technology foresight, and the ongoing evaluation of current capabilities.
Download or read book Magnetic Fusion Technology written by Thomas J. Dolan and published by Springer Science & Business Media. This book was released on 2014-02-10 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: • magnet systems, • plasma heating systems, • control systems, • energy conversion systems, • advanced materials development, • vacuum systems, • cryogenic systems, • plasma diagnostics, • safety systems, and • power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.
Download or read book Aerosol Measurement written by Pramod Kulkarni and published by John Wiley & Sons. This book was released on 2011-07-12 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerosol Measurement: Principles, Techniques, and Applications Third Edition is the most detailed treatment available of the latest aerosol measurement methods. Drawing on the know-how of numerous expert contributors; it provides a solid grasp of measurement fundamentals and practices a wide variety of aerosol applications. This new edition is updated to address new and developing applications of aerosol measurement, including applications in environmental health, atmospheric science, climate change, air pollution, public health, nanotechnology, particle and powder technology, pharmaceutical research and development, clean room technology (integrated circuit manufacture), and nuclear waste management.
Download or read book Fusion Nucl aire written by and published by . This book was released on 2001 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Science written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-02-28 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Science and Engineering transforms fundamental scientific research into powerful societal applications, from materials processing and healthcare to forecasting space weather. Plasma Science: Enabling Technology, Sustainability, Security and Exploration discusses the importance of plasma research, identifies important grand challenges for the next decade, and makes recommendations on funding and workforce. This publication will help federal agencies, policymakers, and academic leadership understand the importance of plasma research and make informed decisions about plasma science funding, workforce, and research directions.
Download or read book Nanomaterials written by Simona Clichici and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle Image Velocimetry written by Markus Raffel and published by Springer Science & Business Media. This book was released on 2007-08-09 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This immensely practical guide to PIV provides a condensed, yet exhaustive guide to most of the information needed for experiments employing the technique. This second edition has updated chapters on the principles and extra information on microscopic, high-speed and three component measurements as well as a description of advanced evaluation techniques. What’s more, the huge increase in the range of possible applications has been taken into account as the chapter describing these applications of the PIV technique has been expanded.
Download or read book An Assessment of the Prospects for Inertial Fusion Energy written by National Research Council and published by National Academies Press. This book was released on 2013-07-05 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential for using fusion energy to produce commercial electric power was first explored in the 1950s. Harnessing fusion energy offers the prospect of a nearly carbon-free energy source with a virtually unlimited supply of fuel. Unlike nuclear fission plants, appropriately designed fusion power plants would not produce the large amounts of high-level nuclear waste that requires long-term disposal. Due to these prospects, many nations have initiated research and development (R&D) programs aimed at developing fusion as an energy source. Two R&D approaches are being explored: magnetic fusion energy (MFE) and inertial fusion energy (IFE). An Assessment of the Prospects for Inertial Fusion Energy describes and assesses the current status of IFE research in the United States; compares the various technical approaches to IFE; and identifies the scientific and engineering challenges associated with developing inertial confinement fusion (ICF) in particular as an energy source. It also provides guidance on an R&D roadmap at the conceptual level for a national program focusing on the design and construction of an inertial fusion energy demonstration plant.
Download or read book Iter Physics written by C Wendell Horton, Jr and published by World Scientific. This book was released on 2015-06-25 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The promise of a vast and clean source of thermal power drove physics research for over fifty years and has finally come to collimation with the international consortium led by the European Union and Japan, with an agreement from seven countries to build a definitive test of fusion power in ITER. It happened because scientists since the Manhattan project have envisioned controlled nuclear fusion in obtaining energy with no carbon dioxide emissions and no toxic nuclear waste products.This large toroidal magnetic confinement ITER machine is described from confinement process to advanced physics of plasma-wall interactions, where pulses erupt from core plasma blistering the machine walls. Emissions from the walls reduce the core temperature which must remain ten times hotter than the 15 million degree core solar temperature to maintain ITER fusion power. The huge temperature gradient from core to wall that drives intense plasma turbulence is described in detail.Also explained are the methods designed to limit the growth of small magnetic islands, the growth of edge localized plasma plumes and the solid state physics limits of the stainless steel walls of the confinement vessel from the burning plasma. Designs of the wall coatings and the special 'exhaust pipe' for spent hot plasma are provided in two chapters. And the issues associated with high-energy neutrons — about 10 times higher than in fission reactions — and how they are managed in ITER, are detailed.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Electromechanics of Particles written by Thomas B. Jones and published by Cambridge University Press. This book was released on 2005-09-08 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this book is on the interactions of small particles, in the size range of microns to millimeters, with electric or magnetic fields. This field has particularly useful practical applications, for instance in photocopier technology and lately in the characterization and manipulation of cells and DNA molecules. The author's objective is to bring together diverse examples of field-particle interactions from many areas of science and technology and then to provide a framework for understanding their common electromechanical phenomena. Using examples from dielectrophoresis, magnetic brush xerography, electrorheology, cell electrorotation, and particle chain rotation, Professor Jones introduces a general model--the effective dipole method--to build a set of predictive models for the forces and torques responsible for the important electromechanical effects. In the last part of the book, the author covers the ubiquitous phenomenon of particle chaining. This book will be highly useful to material engineers and scientists, chemists, and biologists who work with particles, powders, or granular materials.
Download or read book Progress in Fine Particle Plasmas written by Tetsu Mieno and published by BoD – Books on Demand. This book was released on 2020-08-26 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of plasma physics, plasmas (including charged fine particles) have been actively studied for more than 40 years, and special features of wave phenomena, self-organizations of the particles, potential formations, fluid-like motions of the particles, generations of fine particles in the plasmas, etc. have been investigated. Here, these plasmas are called “fine particle plasmas”, which are also called “dusty plasmas” and “complex plasmas”. This book intends to provide the reader with the recent progress of studies of fine particle plasmas from the viewpoints of wide and interdisciplinary directions, such as self-organized fine particles, Coulomb crystal formation, behaviors of fine particles, their stability, and syntheses of nano-sized particles in reactive plasmas. Further, the phenomena of dense grain particles and the effects of massive neutrinos in galaxy clustering are included.
Download or read book ITER The Giant Fusion Reactor written by Michel Claessens and published by Springer Nature. This book was released on 2019-10-17 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides for the first time an insider’s view into ITER, the biggest fusion reactor in the world, which is currently being constructed in southern France. Aimed at bringing the “energy of the stars” to earth, ITER is funded by the major economic powers (China, the EU, India, Japan, Korea, Russia and the US). Often presented as a “nuclear but green” energy source, fusion could play an important role in the future electricity supply. But as delays accumulate and budgets continue to grow, ITER is currently a star partially obscured by clouds. Will ITER save humanity by providing a clean, safe and limitless source of energy, or is it merely a political showcase of cutting-edge technology? Is ITER merely an ambitious research project and partly a PR initiative driven by some politically connected scientists? In any case, ITER has already helped spur on rival projects in the US, Canada and the UK. This book offers readers a behind-the-scenes look at this controversial project, which France snatched from Japan, and introduces them to a world of superlatives: with the largest magnets in the world, the biggest cryogenic plant and tremendous computing power, ITER is one of the most fascinating, and most international, scientific and technological endeavours of our time.
Download or read book Bringing Fusion to the U S Grid written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-11-17 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion energy offers the prospect of addressing the nation's energy needs and contributing to the transition to a low-carbon emission electrical generation infrastructure. Technology and research results from U.S. investments in the major fusion burning plasma experiment known as ITER, coupled with a strong foundation of research funded by the Department of Energy (DOE), position the United States to begin planning for its first fusion pilot plant. Strong interest from the private sector is an additional motivating factor, as the process of decarbonizing and modernizing the nation's electric infrastructure accelerates and companies seek to lead the way. At the request of DOE, Bringing Fusion to the U.S. Grid builds upon the work of the 2019 report Final Report of the Committee on a Strategic Plan for U.S. Burning Plasma Research to identify the key goals and innovations - independent of confinement concept - that are needed to support the development of a U.S. fusion pilot plant that can serve as a model for producing electricity at the lowest possible capital cost.
