Download or read book Titanium in Medical and Dental Applications written by Francis Froes and published by Woodhead Publishing. This book was released on 2018-05-09 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium in Medical and Dental Applications is an essential reference book for those involved in biomedical materials and advanced metals. Written by well-known experts in the field, it covers a broad array of titanium uses, including implants, instruments, devices, the manufacturing processes used to create them, their properties, corrosion resistance and various fabrication approaches. Biomedical titanium materials are a critically important part of biomaterials, especially in cases where non-metallic biomedical materials are not suited to applications, such as the case of load-bearing implants. The book also covers the use of titanium for implants in the medical and dental fields and reviews the use of titanium for medical instruments and devices. - Provides an understanding of the essential and broad applications of Titanium in both the medical and dental industries - Discusses the pathways to manufacturing titanium into critical biomedical and dental devices - Includes insights into further applications within the industry
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Ti Based Biomaterials written by Jarosław Jakubowicz and published by MDPI. This book was released on 2020-06-17 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, great attention has been paid to materials that can be used in the human body to prepare parts that replace failed bone structures. Of all materials, Ti-based materials are the most desirable, because they provide an optimum combination of mechanical, chemical, and biological properties. The successful application of Ti biomaterials has been confirmed mainly in dentistry, orthopedics, and traumatology. Titanium biocompatibility is practically the highest of all metallic biomaterials; however, new solutions are being sought to continuously improve their biocompatibility and osseointegration. Thus, the chemical modification of Ti results in the formation of new alloys or composites, which provide new perspectives for Ti biomaterials applications. This book covers broad aspects of Ti-based biomaterials concerning the design of their structure, mechanical, and biological properties. This book demonstrates that the new Ti-based compounds and their surface treatment provide the best properties for biomedical applications.
Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.
Download or read book Nickel Titanium Materials written by Yoshiki Oshida and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-08-24 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nickel-Titanium alloys are smart materials exhibiting unique properties such as superelasticity and shape-memory effect. The material has been used as orthodontic wires in the dental field for over 20 years. This book is a comprehensive overview to the field of Ni-Ti Materials and the physical, chemical and mechanical properties of this versatile alloy. In addition, complications and challenges exhibited in applications are also discussed.
Download or read book Titanium Alloys written by W Sha and published by Elsevier. This book was released on 2009-04-29 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given their growing importance in the aerospace, automotive, sports and medical sectors, modelling the microstructure and properties of titanium and its alloys is a vital part of research into the development of new applications. This is the first time a book has been dedicated to modelling techniques for titanium.Part one discusses experimental techniques such as microscopy, synchrotron radiation X-ray diffraction and differential scanning calorimetry. Part two reviews physical modelling methods including thermodynamic modelling, the Johnson-Mehl-Avrami method, finite element modelling, the phase-field method, the cellular automata method, crystallographic and fracture behaviour of titanium aluminide and atomistic simulations of interfaces and dislocations relevant to TiAl. Part three covers neural network models and Part four examines surface engineering products. These include surface nitriding: phase composition, microstructure, mechanical properties, morphology and corrosion; nitriding: modelling of hardness profiles and kinetics; and aluminising: fabrication of Ti coatings by mechanical alloying.With its distinguished authors, Titanium alloys: Modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with titanium modelling, as well as users of titanium, titanium alloys and titanium aluminide in the aerospace, automotive, sports and medical implant sectors. - Comprehensively assesses modelling techniques for titanium, including experimental techniques such as microscopy and differential scanning calorimetry - Reviews physical modelling methods including thermodynamic modelling and finite element modelling - Examines surface engineering products with specific chapters focused on surface nitriding and aluminising
Download or read book Titanium Based Alloys for Biomedical Applications written by Petrică Vizureanu and published by Materials Research Forum LLC. This book was released on 2020-06-05 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the state-of-the-art of biomaterials used in the human body and reports new research on various Ti-based alloys with non-toxic elements (Mo, Zr, Ta, Si, Nb, etc.) aimed at improved mechanical properties, corrosion resistance and biocompatibility. Specific laboratory tests are reported for structural characterization, mechanical properties and corrosion resistance testing, and cytotoxicity assessment. Keywords: Titanium Alloys, Biomedical Materials, Cytotoxicity Assessment, Biocompatibility, Production and Properties of Ti-Mo-Zr-Ta Alloys, Surface Modification, Powder Metallurgy, Characterization of Ti-Mo-Zr-Ta-Alloys, Mechanical Properties, Differential Scanning Calorimetry, Electrochemical Behavior, Optical Microstructure, X-ray Diffraction, Thermal Characterization, Corrosion Resistance, Medical Applications.
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Advances in Metallic Biomaterials written by Mitsuo Niinomi and published by Springer. This book was released on 2015-06-17 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews fundamental advances in the use of metallic biomaterials to reconstruct hard tissues and blood vessels. It also covers the latest advances in representative metallic biomaterials, such as stainless steels, Co-Cr alloys, titanium and its alloys, zirconium, tantalum and niobium based alloys. In addition, the latest findings on corrosion, cytotoxic and allergic problems caused by metallic biomaterials are introduced. The book offers a valuable reference source for researchers, graduate students and clinicians working in the fields of materials, surgery, dentistry, and mechanics. Mitsuo Niinomi, PhD, D.D.Sc., is a Professor at the Institute for Materials Research, Tohoku University, Japan. Takayuki Narushima, PhD, is a Professor at the Department of Materials Processing, Tohoku University, Japan. Masaaki Nakai, PhD, is an Associate Professor at the Institute for Materials Research, Tohoku University, Japan.
Download or read book Beta Titanium Alloys in the 1990 s written by Daniel Eylon and published by Minerals, Metals, & Materials Society. This book was released on 1993 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beta titanium alloys are one of the most rapidly developing areas of materials technology. As a group, beta alloys provide a wider range of processing, physical, chemical and mechanical properties than any other titanium alloys.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Bulk Nanostructured Materials written by Ruslan Z. Valiev and published by John Wiley & Sons. This book was released on 2013-09-17 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent results in the area of bulk nanostructured materials and new trends in their severe plastic deformation (SPD) processing, where these techniques are now emerging from the domain of laboratory-scale research into the commercial production of various bulk nanomaterials. Special emphasis is placed on an analysis of the effect of nanostructures in materials fabricated by SPD on mechanical properties (strength and ductility, fatigue strength and life, superplasticity) and functional behavior (shape memory effects, magnetic and electric properties), as well as the numerous examples of their innovative applications. There is a high innovation potential for industrial applications of bulk nanomaterials for structural use (materials with extreme strength) as well as for functional applications such as nanomagnets, materials for hydrogen storage, thermoelectric materials, superconductors, catalysts, and biomedical implants.
Download or read book Titanium Alloys written by Vydehi Arun Joshi and published by CRC Press. This book was released on 2006-01-24 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recognized for their superior strength, corrosion/oxidation resistance, and biocompatibility, titanium alloys are particularly intriguing to engineers, scientists, and metallurgists in aerospace, biomedical, and other industrial applications. Titanium Alloys: An Atlas of Structures and Fracture Features uses award-winning micrographs and fra
Download or read book Corrosion of Titanium written by J. D. Jackson and published by . This book was released on 1966 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Medical Applications of Titanium and Its Alloys written by Jack E. Lemons and published by ASTM International. This book was released on 1996 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thirty papers presented at a 1994 symposium cover the basic materials science issues regarding the processing of titanium alloys, and the controversy regarding their use in medicine. Coverage includes orthopaedic, dental, and cardiovascular applications, with a primary focus on the orthopaedic. Info
Download or read book Additive Manufacturing of Emerging Materials written by Bandar AlMangour and published by Springer. This book was released on 2018-08-01 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a solid background for understanding the immediate past, the ongoing present, and the emerging trends of additive manufacturing, with an emphasis on innovations and advances in its use for a wide spectrum of manufacturing applications. It contains contributions from leading authors in the field, who view the research and development progress of additive manufacturing techniques from the unique angle of developing high-performance composites and other complex material parts. It is a valuable reference book for scientists, engineers, and entrepreneurs who are seeking technologically novel and economically viable innovations for high-performance materials and critical applications. It can also benefit graduate students and post-graduate fellows majoring in mechanical, manufacturing, and material sciences, as well as biomedical engineering.
