Download or read book Titanium Alloys for Biomedical Development and Applications written by Zhentao Yu and published by Elsevier. This book was released on 2022-01-21 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Alloys for Biomedical Development and Applications: Design, Microstructure, Properties and Application systematically introduces basic theories and progress in the research of biomedical ß-Ti alloys achieved by researchers from different fields. It focuses on a high-strength and low elastic modulus biomedical ß-Ti alloy (TLM), etc. designed by the authors. The alloy design methods, microstructural characteristics, mechanical properties, surface treatment methods and biocompatibility of the TLM alloy are discussed in detail, along with a concise description of the medical devices made from this alloy and the application examples. This book will appeal to researchers as well as students from different disciplines, including materials science, biology, medicine and engineering fields. Fills the knowledge gap in the current research and application of newly developed biomedical ß-Ti alloys Discusses the selection principles used for proper biomedical Ti alloys for medical and dental devices Includes details on the technological data basis for the application of biomedical ß-Ti alloys with a focus on the TLM ß-Ti alloy
Download or read book Development and Application of Biomedical Titanium Alloys written by Liqiang Wang and published by Bentham Science Publishers. This book was released on 2018-04-05 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium and its alloys have been widely used as biomedical implant materials due to their low density, good mechanical properties, superior corrosion resistance and biocompatibility when compared with other metallic biomaterials such as Co–Cr alloys and stainless steels. Recently, β-type titanium alloys have been increasingly considered as excellent implant materials because of the remarkable combination of high strength-to-weight ratio, good fatigue resistance, relatively low Young's modulus, good biocompatibility and high corrosion resistance relative to conventional titanium biomaterials. This book covers recent information about biomedical titanium alloy development and 3D printing. Chapters describe the processing, microstructure, mechanical properties and corrosion properties in detail. Information about the surface modification of titanium alloys for biomedical applications, and manufacturing of titanium alloys by new technologies (such as selective laser melting and electron beam melting), is also presented. Readers will learn about the various types of biomedical titanium alloys, their advantages and disadvantages, their fabrication methods and medical applications. This book is a useful handbook for biomedical engineers, metallurgists and biotechnicians seeking information about titanium-based alloys for biomaterials research and development.
Download or read book Titanium Based Alloys for Biomedical Applications written by Petrică Vizureanu and published by Materials Research Forum LLC. This book was released on 2020-06-05 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the state-of-the-art of biomaterials used in the human body and reports new research on various Ti-based alloys with non-toxic elements (Mo, Zr, Ta, Si, Nb, etc.) aimed at improved mechanical properties, corrosion resistance and biocompatibility. Specific laboratory tests are reported for structural characterization, mechanical properties and corrosion resistance testing, and cytotoxicity assessment. Keywords: Titanium Alloys, Biomedical Materials, Cytotoxicity Assessment, Biocompatibility, Production and Properties of Ti-Mo-Zr-Ta Alloys, Surface Modification, Powder Metallurgy, Characterization of Ti-Mo-Zr-Ta-Alloys, Mechanical Properties, Differential Scanning Calorimetry, Electrochemical Behavior, Optical Microstructure, X-ray Diffraction, Thermal Characterization, Corrosion Resistance, Medical Applications.
Download or read book Titanium Based Alloys for Biomedical Applications written by Petrică Vizureanu and published by Materials Research Forum LLC. This book was released on 2020-06-05 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the state-of-the-art of biomaterials used in the human body and reports new research on various Ti-based alloys with non-toxic elements (Mo, Zr, Ta, Si, Nb, etc.) aimed at improved mechanical properties, corrosion resistance and biocompatibility. Specific laboratory tests are reported for structural characterization, mechanical properties and corrosion resistance testing, and cytotoxicity assessment. Keywords: Titanium Alloys, Biomedical Materials, Cytotoxicity Assessment, Biocompatibility, Production and Properties of Ti-Mo-Zr-Ta Alloys, Surface Modification, Powder Metallurgy, Characterization of Ti-Mo-Zr-Ta-Alloys, Mechanical Properties, Differential Scanning Calorimetry, Electrochemical Behavior, Optical Microstructure, X-ray Diffraction, Thermal Characterization, Corrosion Resistance, Medical Applications.
Download or read book Medical Applications of Titanium and Its Alloys written by Jack E. Lemons and published by ASTM International. This book was released on 1996 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thirty papers presented at a 1994 symposium cover the basic materials science issues regarding the processing of titanium alloys, and the controversy regarding their use in medicine. Coverage includes orthopaedic, dental, and cardiovascular applications, with a primary focus on the orthopaedic. Info
Download or read book Alloy Materials and Their Allied Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-06-16 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloy Materials and Their Allied Applications provides an in-depth overview of alloy materials and applications. The 11 chapters focus on the fabrication methods and design of corrosion-resistant, magnetic, biodegradable, and shape memory alloys. The industrial applications in the allied areas, such as biomedical, dental implants, abrasive finishing, surface treatments, photocatalysis, water treatment, and batteries, are discussed in detail. This book will help readers solve fundamental and applied problems faced in the field of allied alloys applications.
Download or read book Ti Based Biomaterials written by Jarosław Jakubowicz and published by MDPI. This book was released on 2020-06-17 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, great attention has been paid to materials that can be used in the human body to prepare parts that replace failed bone structures. Of all materials, Ti-based materials are the most desirable, because they provide an optimum combination of mechanical, chemical, and biological properties. The successful application of Ti biomaterials has been confirmed mainly in dentistry, orthopedics, and traumatology. Titanium biocompatibility is practically the highest of all metallic biomaterials; however, new solutions are being sought to continuously improve their biocompatibility and osseointegration. Thus, the chemical modification of Ti results in the formation of new alloys or composites, which provide new perspectives for Ti biomaterials applications. This book covers broad aspects of Ti-based biomaterials concerning the design of their structure, mechanical, and biological properties. This book demonstrates that the new Ti-based compounds and their surface treatment provide the best properties for biomedical applications.
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Titanium in Medical and Dental Applications written by Francis H Froes and published by Woodhead Publishing. This book was released on 2018-05-09 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium in Medical and Dental Applications is an essential reference book for those involved in biomedical materials and advanced metals. Written by well-known experts in the field, it covers a broad array of titanium uses, including implants, instruments, devices, the manufacturing processes used to create them, their properties, corrosion resistance and various fabrication approaches. Biomedical titanium materials are a critically important part of biomaterials, especially in cases where non-metallic biomedical materials are not suited to applications, such as the case of load-bearing implants. The book also covers the use of titanium for implants in the medical and dental fields and reviews the use of titanium for medical instruments and devices. Provides an understanding of the essential and broad applications of Titanium in both the medical and dental industries Discusses the pathways to manufacturing titanium into critical biomedical and dental devices Includes insights into further applications within the industry
Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Surgical Tools and Medical Devices written by Waqar Ahmed and published by Springer. This book was released on 2016-05-21 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition presents information and knowledge on the field of biomedical devices and surgical tools. The authors look at the interactions between nanotechnology, nanomaterials, design, modeling, and tools for surgical and dental applications, as well as how nanostructured surfaces can be created for the purposes of improving cell adhesion between medical devices and the human body. Each original chapter is revised in this second edition and describes developments in coatings for heart valves, stents, hip and knee joints, cardiovascular devices, orthodontic applications, and regenerative materials such as bone substitutes. There are also 8 new chapters that address: Microvascular anastomoses Inhaler devices used for pulmonary delivery of medical aerosols Surface modification of interference screws Biomechanics of the mandible (a detailed case study) Safety and medical devices The synthesis of nanostructured material Delivery of anticancer molecules using carbon nanotubes Nano and micro coatings for medical devices This book is appropriate for engineers, material scientists, chemists, physicists, biologists, medical and dental professionals with an interest in biomedical devices and tools, and researchers in the same fields.
Download or read book Nickel Titanium Materials written by Yoshiki Oshida and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-08-24 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nickel-Titanium alloys are smart materials exhibiting unique properties such as superelasticity and shape-memory effect. The material has been used as orthodontic wires in the dental field for over 20 years. This book is a comprehensive overview to the field of Ni-Ti Materials and the physical, chemical and mechanical properties of this versatile alloy. In addition, complications and challenges exhibited in applications are also discussed.
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Metal Ions in Biological Systems written by Helmut Sigel and published by CRC Press. This book was released on 2000-01-27 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Highlights the availability of magnesium to organisms, its uptake and transport in microorganisms and plants as well as its role in health and disease of animals and humans including its toxicology."
Download or read book Surface Engineered Surgical Tools and Medical Devices written by Mark J. Jackson and published by Springer Science & Business Media. This book was released on 2007-07-05 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical devices and surgical tools that contain micro and nanoscale features allow surgeons to perform clinical procedures with greater precision and safety while monitoring physiological and biomechanical parameters more accurately. While surgeons have started to master the use of nanostructured surgical tools in the operating room, this book addresses for the first time the impact and interaction of nanomaterials and nanostructured coatings in a comprehensive manner. Surface Engineered Surgical Tools and Medical Devices presents the latest information and techniques in the emerging field of surface engineered biomedical devices and surgical tools, and analyzes the interaction between nanotechnology, nanomaterials, and tools for surgical applications. Chapters of the book describe developments in coatings for heart valves, stents, hip and knee joints, cardiovascular devices, orthodontic applications, and regenerative materials such as bone substitutes. Chapters are also dedicated to the performance of surgical tools and dental tools and describe how nanostructured surfaces can be created for the purposes of improving cell adhesion between medical devices and the human body.
Download or read book Titanium Alloys for Biomedical Implants and Devices written by Hooyar Attar and published by MDPI. This book was released on 2021-02-11 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special issue provides a current snapshot of recent advances and ongoing challenges in the development of titanium alloys for biomedical implants and devices. Titanium offers significant advantages over other materials including higher strength and better biocompatibility. This issue highlights current trends and recent developments, including the uptake of additive manufacturing (3D printing), and approaches to improve processing and performance of titanium alloys for medical applications.
