Download or read book Titanium Alloys 2017 written by Mark T. Whittaker and published by MDPI. This book was released on 2018-10-18 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Titanium Alloys 2017" that was published in Metals
Download or read book Titanium Alloys 2017 written by Mark Whittaker and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium is a good example of a material that is globally recognized for its outstanding properties, making it desirable for a range of industries. Titanium and its alloys are utilized in a wide range of industries, including aerospace, automotive and high performance leisure equipment. This Special Issue of Metals focusing on titanium contains a range of articles based on research into this fascinating material and its wide range of alloys. For applications that can withstand the high basic cost of titanium it is shown that the unique properties of the material have the potential to provide further performance improvements to existing industries, whilst offering new opportunities to emerging markets.
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Corrosion of Titanium written by J. D. Jackson and published by . This book was released on 1966 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Alloys for Biomedical Implants and Devices written by Hooyar Attar and published by MDPI. This book was released on 2021-02-11 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special issue provides a current snapshot of recent advances and ongoing challenges in the development of titanium alloys for biomedical implants and devices. Titanium offers significant advantages over other materials including higher strength and better biocompatibility. This issue highlights current trends and recent developments, including the uptake of additive manufacturing (3D printing), and approaches to improve processing and performance of titanium alloys for medical applications.
Download or read book Titanium Alloys for Biomedical Development and Applications written by Zhentao Yu and published by Elsevier. This book was released on 2022-01-21 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Alloys for Biomedical Development and Applications: Design, Microstructure, Properties and Application systematically introduces basic theories and progress in the research of biomedical ß-Ti alloys achieved by researchers from different fields. It focuses on a high-strength and low elastic modulus biomedical ß-Ti alloy (TLM), etc. designed by the authors. The alloy design methods, microstructural characteristics, mechanical properties, surface treatment methods and biocompatibility of the TLM alloy are discussed in detail, along with a concise description of the medical devices made from this alloy and the application examples. This book will appeal to researchers as well as students from different disciplines, including materials science, biology, medicine and engineering fields. Fills the knowledge gap in the current research and application of newly developed biomedical ß-Ti alloys Discusses the selection principles used for proper biomedical Ti alloys for medical and dental devices Includes details on the technological data basis for the application of biomedical ß-Ti alloys with a focus on the TLM ß-Ti alloy
Download or read book Chinese Standard GB GB T GBT JB JB T YY HJ NB HG QC SL SN SH JJF JJG CJ TB YD YS NY FZ JG QB SJ SY DL AQ CB GY JC JR JT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 7291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards and Industry Standards (Total 17,000 standards).
Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.
Download or read book Titanium and Titanium Alloys written by and published by . This book was released on 1974 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GB GB T GBT Product Catalog Translated English of Chinese Standard All national standards GB GB T GBT GBZ written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2777 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.
Download or read book Development and Application of Biomedical Titanium Alloys written by Liqiang Wang and published by Bentham Science Publishers. This book was released on 2018-04-05 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium and its alloys have been widely used as biomedical implant materials due to their low density, good mechanical properties, superior corrosion resistance and biocompatibility when compared with other metallic biomaterials such as Co–Cr alloys and stainless steels. Recently, β-type titanium alloys have been increasingly considered as excellent implant materials because of the remarkable combination of high strength-to-weight ratio, good fatigue resistance, relatively low Young's modulus, good biocompatibility and high corrosion resistance relative to conventional titanium biomaterials. This book covers recent information about biomedical titanium alloy development and 3D printing. Chapters describe the processing, microstructure, mechanical properties and corrosion properties in detail. Information about the surface modification of titanium alloys for biomedical applications, and manufacturing of titanium alloys by new technologies (such as selective laser melting and electron beam melting), is also presented. Readers will learn about the various types of biomedical titanium alloys, their advantages and disadvantages, their fabrication methods and medical applications. This book is a useful handbook for biomedical engineers, metallurgists and biotechnicians seeking information about titanium-based alloys for biomaterials research and development.
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Polarity Dependent Removal Interferences in Sink EDM of Titanium Alloys written by Maximilian Holsten and published by Apprimus Wissenschaftsverlag. This book was released on 2018-12-31 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the design of turbomachinery components, a significant effort is carried out regarding the optimization of efficiency. The increase in thermal efficiency particularly involves the introduction of high-performance alloys. Such alloys are for example titanium alloys. Sink electrical discharge machining (sink EDM) is a crucial manufacturing process for components due to its independence of machined material strengths; however, new materials require process design. Hence, research to understand and optimize the machining of titanium alloys is of great benefit to the industry in general. A positive tool polarity is generally adopted in sink EDM to maximize material removal relative to tool wear. Sink EDM of α/β titanium alloys as Ti6Al4V is however atypical in that these materials necessitate a negative tool polarity. Adding to the intrigue are gamma titanium aluminides (γ-TiAl), which machine better under the conventional positive polarity. Established explanatory models of sink EDM fail in resolving the removal behavior – a need for fundamental research is given. This thesis focuses on clarifying the phenomena behind this interesting behavior by investigating removal mechanisms over a range of relevant process conditions. The polarity-effect is demonstrated to arise from the polarity-dependent nature and extent of titanium carbide (TiC) formation on the workpiece surface, which significantly affects material removal mechanisms. An explanatory model, deduced from different experimental and numerical approaches, clarifies the influence of polarity to the formation mechanism of a TiC layer. With regard to monitoring of adverse layer formations, the measurement of acoustic emission (AE) is proven an appropriate concept. A correlation of the AE signal to process forces is even established, which may be crucial to determine the deflection of thin electrodes in EDM. Finally, the knowledge acquired is applied and enhanced in comprehensive process design, that also involves the machining of additively manufactured γ-TiAl. The study reveals the beneficial behavior of the fine microstructure relative to the resulting surface integrity. As a result, this thesis delivers a model-based concept for process design with respect to the adequate choice of tool polarity during machining of titanium alloys.
Download or read book Machining and Grinding of Titanium and Its Alloys written by C. T. Olofson and published by . This book was released on 1965 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report covers the state of the art of metal-removal operations for titanium and its alloys. It describes the methods currently employed for conventional machining, grinding, electrolytic, and chemical machining processes. The precautions which should be taken to avoid troubles resulting from the characteristics typical of titanium are pointed out. Ten machining, two grinding, two cutting, and two unconventional metal-removal operations are discussed separately. In other sections, the mechanics of chip-forming processes, the response to machining variables, costs, and precautions desirable from the standpoint of safety are discussed.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Metallurgy and Design of Alloys with Hierarchical Microstructures written by Krishnan K. Sankaran and published by Elsevier. This book was released on 2017-06-14 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. Discusses the science behind the properties and performance of advanced metallic materials Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work
Download or read book Welding and Joining of Aerospace Materials written by Mahesh Chaturvedi and published by Woodhead Publishing. This book was released on 2020-10-13 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welding and Joining of Aerospace Materials, Second Edition, is an essential reference for engineers and designers in the aerospace, materials, welding and joining industries, as well as companies and other organizations operating in these sectors. This updated edition brings together an international team of experts with updated and new chapters on electron beam welding, friction stir welding, weld-bead cracking, and recent developments in arc welding. Highlights new trends and techniques for aerospace materials and manufacture and repair of their components Covers many joining techniques, including riveting, composite-to-metal bonding, and diffusion bonding Contains updated coverage on recently developed welding techniques for aerospace materials
