Download or read book Tissue Engineering III Cell Surface Interactions for Tissue Culture written by Cornelia Kasper and published by Springer. This book was released on 2012-04-23 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cell-Surface Interaction, by J. S. Hayes, E. M. Czekanska and R. G. Richards. Studying Cell-Surface Interactions In Vitro: A Survey of Experimental Approaches and Techniques, by Stefanie Michaelis, Rudolf Robelek and Joachim Wegener. Harnessing Cell-Biomaterial Interactions for Osteochondral Tissue Regeneration, by Kyobum Kim, Diana M. Yoon, Antonios G. Mikos and F. Kurtis Kasper. Interaction of Cells with Decellularized Biological Materials, by Mathias Wilhelmi, Bettina Giere and Michael Harder. Evaluation of Biocompatibility Using In Vitro Methods: Interpretation and Limitations, by Arie Bruinink and Reto Luginbuehl. Artificial Scaffolds and Mesenchymal Stem Cells for Hard Tissues, by Margit Schulze and Edda Tobiasch. Bioactive Glass-Based Scaffolds for Bone Tissue Engineering, by Julia Will, Lutz-Christian Gerhardt and Aldo R. Boccaccini. Microenvironment Design for Stem Cell Fate Determination, by Tali Re’em and Smadar Cohen. Stem Cell Differentiation Depending on Different Surfaces, by Sonja Kress, Anne Neumann, Birgit Weyand and Cornelia Kasper. Designing the Biocompatibility of Biohybrids, by Frank Witte, Ivonne Bartsch and Elmar Willbold. Interaction of Cartilage and Ceramic Matrix, by K. Wiegandt, C. Goepfert, R. Pörtner and R. Janssen. Bioresorption and Degradation of Biomaterials, by Debarun Das, Ziyang Zhang, Thomas Winkler, Meenakshi Mour, Christina I. Günter, Michael M. Morlock, Hans-Günther Machens and Arndt F. Schilling.

Download or read book Tissue Engineering written by Clemens van Blitterswijk and published by Academic Press. This book was released on 2014-12-10 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tissue Engineering is a comprehensive introduction to the engineering and biological aspects of this critical subject. With contributions from internationally renowned authors, it provides a broad perspective on tissue engineering for students coming to the subject for the first time. In addition to the key topics covered in the previous edition, this update also includes new material on the regulatory authorities, commercial considerations as well as new chapters on microfabrication, materiomics and cell/biomaterial interface. Effectively reviews major foundational topics in tissue engineering in a clear and accessible fashion Includes state of the art experiments presented in break-out boxes, chapter objectives, chapter summaries, and multiple choice questions to aid learning New edition contains material on regulatory authorities and commercial considerations in tissue engineering

Download or read book Principles of Tissue Engineering written by Robert Lanza and published by Elsevier. This book was released on 2000-05-16 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: The opportunity that tissue engineering provides for medicine is extraordinary. In the United States alone, over half-a-trillion dollars are spent each year to care for patients who suffer from tissue loss or dysfunction. Although numerous books and reviews have been written on tissue engineering, none has been as comprehensive in its defining of the field. Principles of Tissue Engineering combines in one volume the prerequisites for a general understanding of tissue growth and development, the tools and theoretical information needed to design tissues and organs, as well as a presentation of applications of tissue engineering to diseases affecting specific organ systems. The first edition of the book, published in 1997, is the definite reference in the field. Since that time, however, the discipline has grown tremendously, and few experts would have been able to predict the explosion in our knowledge of gene expression, cell growth and differentiation, the variety of stem cells, new polymers and materials that are now available, or even the successful introduction of the first tissue-engineered products into the marketplace. There was a need for a new edition, and this need has been met with a product that defines and captures the sense of excitement, understanding and anticipation that has followed from the evolution of this fascinating and important field. Key Features* Provides vast, detailed analysis of research on all of the major systems of the human body, e.g., skin, muscle, cardiovascular, hematopoietic, and nerves* Essential to anyone working in the field* Educates and directs both the novice and advanced researcher* Provides vast, detailed analysis of research with all of the major systems of the human body, e.g. skin, muscle, cardiovascular, hematopoietic, and nerves* Has new chapters written by leaders in the latest areas of research, such as fetal tissue engineering and the universal cell* Considered the definitive reference in the field* List of contributors reads like a "who's who" of tissue engineering, and includes Robert Langer, Joseph Vacanti, Charles Vacanti, Robert Nerem, A. Hari Reddi, Gail Naughton, George Whitesides, Doug Lauffenburger, and Eugene Bell, among others

Download or read book Stem Cell Biology and Tissue Engineering in Dental Sciences written by Ajaykumar Vishwakarma and published by Academic Press. This book was released on 2014-11-05 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stem Cell Biology and Tissue Engineering in Dental Sciences bridges the gap left by many tissue engineering and stem cell biology titles to highlight the significance of translational research in this field in the medical sciences. It compiles basic developmental biology with keen focus on cell and matrix biology, stem cells with relevance to tissue engineering biomaterials including nanotechnology and current applications in various disciplines of dental sciences; viz., periodontology, endodontics, oral & craniofacial surgery, dental implantology, orthodontics & dentofacial orthopedics, organ engineering and transplant medicine. In addition, it covers research ethics, laws and industrial pitfalls that are of particular importance for the future production of tissue constructs. Tissue Engineering is an interdisciplinary field of biomedical research, which combines life, engineering and materials sciences, to progress the maintenance, repair and replacement of diseased and damaged tissues. This ever-emerging area of research applies an understanding of normal tissue physiology to develop novel biomaterial, acellular and cell-based technologies for clinical and non-clinical applications. As evident in numerous medical disciplines, tissue engineering strategies are now being increasingly developed and evaluated as potential routine therapies for oral and craniofacial tissue repair and regeneration. Diligently covers all the aspects related to stem cell biology and tissue engineering in dental sciences: basic science, research, clinical application and commercialization Provides detailed descriptions of new, modern technologies, fabrication techniques employed in the fields of stem cells, biomaterials and tissue engineering research including details of latest advances in nanotechnology Includes a description of stem cell biology with details focused on oral and craniofacial stem cells and their potential research application throughout medicine Print book is available and black and white, and the ebook is in full color

Download or read book Tissue Engineering Using Ceramics and Polymers written by Aldo R. Boccaccini and published by Elsevier. This book was released on 2007-10-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology and research in the field of tissue engineering has drastically increased within the last few years to the extent that almost every tissue and organ of the human body could potentially be regenerated. With its distinguished editors and international team of contributors, Tissue Engineering using Ceramics and Polymers reviews the latest research and advances in this thriving area and how they can be used to develop treatments for disease states. Part one discusses general issues such as ceramic and polymeric biomaterials, scaffolds, transplantation of engineered cells, surface modification and drug delivery. Later chapters review characterisation using x-ray photoelectron spectroscopy and secondary ion mass spectrometry as well as environmental scanning electron microscopy and Raman micro-spectroscopy. Chapters in part two analyse bone regeneration and specific types of tissue engineering and repair such as cardiac, intervertebral disc, skin, kidney and bladder tissue. The book concludes with the coverage of themes such as nerve bioengineering and the micromechanics of hydroxyapatite-based biomaterials and tissue scaffolds. Tissue Engineering using Ceramics and Polymers is an innovative reference for professionals and academics involved in the field of tissue engineering. An innovative and up-to-date reference for professionals and academics Environmental scanning electron microscopy is discussed Analyses bone regeneration and specific types of tisue engineering

Download or read book Biodental Engineering III written by R.M. Natal Jorge and published by CRC Press. This book was released on 2014-06-11 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dentistry is a branch of medicine with its own peculiarities and very diverse areas of action, which means that it can be considered as an interdisciplinary field. Currently the use of new techniques and technologies receives much attention. Biodental Engineering III contains contributions from 13 countries, which were presented at BIODENTAL 2014,

Download or read book Introduction to Biomedical Engineering written by John Enderle and published by Elsevier. This book was released on 2005-05-20 with total page 1141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Under the direction of John Enderle, Susan Blanchard and Joe Bronzino, leaders in the field have contributed chapters on the most relevant subjects for biomedical engineering students. These chapters coincide with courses offered in all biomedical engineering programs so that it can be used at different levels for a variety of courses of this evolving field. Introduction to Biomedical Engineering, Second Edition provides a historical perspective of the major developments in the biomedical field. Also contained within are the fundamental principles underlying biomedical engineering design, analysis, and modeling procedures. The numerous examples, drill problems and exercises are used to reinforce concepts and develop problem-solving skills making this book an invaluable tool for all biomedical students and engineers. New to this edition: Computational Biology, Medical Imaging, Genomics and Bioinformatics. * 60% update from first edition to reflect the developing field of biomedical engineering* New chapters on Computational Biology, Medical Imaging, Genomics, and Bioinformatics* Companion site: http://intro-bme-book.bme.uconn.edu/* MATLAB and SIMULINK software used throughout to model and simulate dynamic systems* Numerous self-study homework problems and thorough cross-referencing for easy use

Download or read book Tissue Engineering II written by Kyongbum Lee and published by Springer. This book was released on 2006-10-19 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is our pleasure to present this special volume on tissue engineering in the series Advances in Biochemical Engineering and Biotechnology. Thisvolume re?ects the emergence of tissue engineering as a core discipline of modern biomedical engineering, and recognizes the growing synergies between the technological developments in biotechnology and biomedicine. Along this vein, the focusof thisvolume istoprovide abiotechnology driven perspective on cell engineering fundamentals while highlighting their signi?cance in p- ducing functional tissues. Our aim is to present an overview of the state of the art of a selection of these technologies, punctuated with current applications in the research and development of cell-based therapies for human disease. To prepare this volume, we have solicited contributions from leaders and experts in their respective ?elds, ranging from biomaterials and bioreactors to gene delivery and metabolic engineering. Particular emphasis was placed on including reviews that discuss various aspects of the biochemical p- cesses underlying cell function, such as signaling, growth, differentiation, and communication. The reviews of research topics cover two main areas: cel- lar and non-cellular components and assembly; evaluation and optimization of tissue function; and integrated reactor or implant system development for research and clinical applications. Many of the reviews illustrate how bioche- cal engineering methods are used to produce and characterize novel materials (e. g. genetically engineered natural polymers, synthetic scaffolds with ce- type speci?c attachment sites or inductive factors), whose unique properties enable increased levels of control over tissue development and architecture.

Download or read book Computational Modeling in Tissue Engineering written by Liesbet Geris and published by Springer Science & Business Media. This book was released on 2012-10-30 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the major challenges in tissue engineering is the translation of biological knowledge on complex cell and tissue behavior into a predictive and robust engineering process. Mastering this complexity is an essential step towards clinical applications of tissue engineering. This volume discusses computational modeling tools that allow studying the biological complexity in a more quantitative way. More specifically, computational tools can help in: (i) quantifying and optimizing the tissue engineering product, e.g. by adapting scaffold design to optimize micro-environmental signals or by adapting selection criteria to improve homogeneity of the selected cell population; (ii) quantifying and optimizing the tissue engineering process, e.g. by adapting bioreactor design to improve quality and quantity of the final product; and (iii) assessing the influence of the in vivo environment on the behavior of the tissue engineering product, e.g. by investigating vascular ingrowth. The book presents examples of each of the above mentioned areas of computational modeling. The underlying tissue engineering applications will vary from blood vessels over trachea to cartilage and bone. For the chapters describing examples of the first two areas, the main focus is on (the optimization of) mechanical signals, mass transport and fluid flow encountered by the cells in scaffolds and bioreactors as well as on the optimization of the cell population itself. In the chapters describing modeling contributions in the third area, the focus will shift towards the biology, the complex interactions between biology and the micro-environmental signals and the ways in which modeling might be able to assist in investigating and mastering this complexity. The chapters cover issues related to (multiscale/multiphysics) model building, training and validation, but also discuss recent advances in scientific computing techniques that are needed to implement these models as well as new tools that can be used to experimentally validate the computational results.

Download or read book Tissue Engineering written by Fouad Sabry and published by One Billion Knowledgeable. This book was released on 2022-10-05 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: What Is Tissue Engineering Tissue engineering is a subfield of biomedical engineering that focuses on repairing, maintaining, enhancing, or replacing various kinds of biological tissues through the utilization of a variety of techniques, including cells, engineering, and material science, as well as appropriate biochemical and physicochemical factors. Tissue engineering is not limited to applications that involve cells and tissue scaffolds; rather, it typically involves placing cells on tissue scaffolds in order to form new viable tissue for a medical purpose. However, tissue engineering is not limited to applications involving cells and tissue scaffolds. As a result of its expanding breadth and significance, it is now possible to consider it to be an independent field, despite the fact that it was originally classified as a sub-field of biomaterials. How You Will Benefit (I) Insights, and validations about the following topics: Chapter 1: Tissue engineering Chapter 2: Artificial organ Chapter 3: Regenerative medicine Chapter 4: Organ printing Chapter 5: Knee cartilage replacement therapy Chapter 6: Cardiomyoplasty Chapter 7: Neural tissue engineering Chapter 8: Nerve guidance conduit Chapter 9: Autologous chondrocyte implantation Chapter 10: Nano-scaffold Chapter 11: Fibrin scaffold Chapter 12: Decellularization Chapter 13: 3D bioprinting Chapter 14: 3D cell culture Chapter 15: In vivo bioreactor Chapter 16: Bioartificial heart Chapter 17: Regeneration in humans Chapter 18: Bio-ink Chapter 19: Artificial cartilage Chapter 20: Tissue engineering of heart valves Chapter 21: Artificial ovary (II) Answering the public top questions about tissue engineering. (III) Real world examples for the usage of tissue engineering in many fields. (IV) 17 appendices to explain, briefly, 266 emerging technologies in each industry to have 360-degree full understanding of tissue engineering' technologies. Who This Book Is For Professionals, undergraduate and graduate students, enthusiasts, hobbyists, and those who want to go beyond basic knowledge or information for any kind of tissue engineering.

Download or read book Tissue Engineering written by Palsson and published by Pearson Education India. This book was released on 2009-09 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tissue Engineering written by Norbert Pallua and published by Springer Science & Business Media. This book was released on 2010-12-16 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tissue engineering is a multidisciplinary field incorporating the principles of biology, chemistry, engineering, and medicine to create biological substitutes of native tissues for scientific research or clinical use. Specific applications of this technology include studies of tissue development and function, investigating drug response, and tissue repair and replacement. This area is rapidly becoming one of the most promising treatment options for patients suffering from tissue failure. This abundantly illustrated and well-structured guide serves as a reference for all clinicians and researchers dealing with tissue engineering issues in their daily practice.

Download or read book Principles of Tissue Engineering written by Robert Lanza and published by Academic Press. This book was released on 2011-10-13 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1997, Principles of Tissue Engineering is the widely recognized definitive resource in the field. The third edition provides a much needed update of the rapid progress that has been achieved in the field, combining the prerequisites for a general understanding of tissue growth and development, the tools and theoretical information needed to design tissues and organs, as well as a presentation by the world’s experts of what is currently known about each specific organ system. This edition includes greatly expanded focus on stem cells, including adult and embryonic stem cells and progenitor populations that may soon lead to new tissue engineering therapies for heart disease, diabetes, and a wide variety of other diseases that afflict humanity. This up-to-date coverage of stem cell biology and other emerging technologies is complemented by a series of new chapters on recent clinical experience in applying tissue engineering. The result is a comprehensive textbook that we believe will be useful to students and experts alike. New to this edition:*Includes new chapters on biomaterial-protein interactions, nanocomposite and three-dimensional scaffolds, skin substitutes, spinal cord, vision enhancement, and heart valves*Expanded coverage of adult and embryonic stem cells of the cardiovascular, hematopoietic, musculoskeletal, nervous, and other organ systems

Download or read book Regenerative Medicine from Protocol to Patient written by Gustav Steinhoff and published by Springer. This book was released on 2016-04-12 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Regenerative medicine is the main field of groundbreaking medical development and therapy using knowledge from developmental and stem cell biology as well as advanced molecular and cellular techniques. This collection of volumes, Regenerative Medicine: From Protocol to Patient, aims to explain the scientific knowledge and emerging technology as well as the clinical application in different organ systems and diseases. International leading experts from all over the world describe the latest scientific and clinical knowledge of the field of regenerative medicine. The process of translating science of laboratory protocols into therapies is explained in sections on regulatory, ethical and industrial issues. The collection is organized into five volumes: (1) Biology of Tissue Regeneration, (2) Stem Cell Science and Technology, (3) Tissue Engineering, Biomaterials and Nanotechnology, (4) Regenerative Therapies I, and (5) Regenerative Therapies II. The textbook gives the student, the researcher, the health care professional, the physician and the patient a complete survey on the current scientific basis, therapeutical protocols, clinical translation and practiced therapies in regenerative medicine. Volume 3: Tissue engineering, Biomaterials and Nanotechnology focuses the development of technologies, which enable an efficient transfer of therapeutic genes and drugs exclusively to target cells and potential bioactive materials for clinical use. Principles of tissue engineering, vector technology, multifunctionalized nanoparticles, biodegradable materials, controlled release, and biointerface technology are described with regard to the development of new clinical cell technology. Imaging and targeting technologies as well as biological aspects of tissue and organ engineering are depicted.

Download or read book Biomaterials Artificial Organs and Tissue Engineering written by L Hench and published by Elsevier. This book was released on 2005-09-27 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining quality of life in an ageing population is one of the great challenges of the 21st Century. This book summarises how this challenge is being met by multi-disciplinary developments of specialty biomaterials, devices, artificial organs and in-vitro growth of human cells as tissue engineered constructs. Biomaterials, Artificial Organs and Tissue Engineering is intended for use as a textbook in a one semester course for upper level BS, MS and Meng students. The 25 chapters are organized in five parts: Part one provides an introduction to living and man-made materials for the non-specialist; Part two is an overview of clinical applications of various biomaterials and devices; Part three summarises the bioengineering principles, materials and designs used in artificial organs; Part four presents the concepts, cell techniques, scaffold materials and applications of tissue engineering; Part five provides an overview of the complex socio-economic factors involved in technology based healthcare, including regulatory controls, technology transfer processes and ethical issues. Comprehensive introduction to living and man-made materials Looks at clinical applications of various biomaterials and devices Bioengineering principles, materials and designs used in artificial organs are summarised

Download or read book Frontiers in Tissue Engineering written by C.W. Patrick and published by Elsevier. This book was released on 1998-02-20 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Tissue Engineering is a carefully edited compilation of state-of-the-art contributions from an international authorship of experts in the diverse subjects that make up tissue engineering. A broad representation of the medical, scientific, industrial and regulatory community is detailed in the book. The work is an authoritative and comprehensive reference source for scientists and clinicians working in this emerging field. The book is divided into three parts: fundamentals and methods of tissue engineering, tissue engineering applied to specialised tissues, and tissue engineering applied to organs. The text offers many novel approaches, including a detailed coverage of cell-tissue interactions at cellular and molecular levels; cell-tissue surface, biochemical, and mechanical environments; biomaterials; engineering design; tissue-organ function; new approaches to tissue-organ regeneration and replacement of function; ethical considerations of tissue engineering; and government regulation of tissue-engineered products.

Download or read book Biomaterials and Tissue Engineering written by Oguzhan Gunduz and published by Springer Nature. This book was released on 2023-08-25 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume covers all fundamental principles for researchers and professionals interested in the field of Biomaterials and Tissue Engineering, an interdisciplinary field of research with contributions from biomedical scientists, engineers, and physicians. With a strong focus on biomaterials and scaffolds, the book also covers testing and evaluation pathways for in vitro and in vivo studies. This book also presents a broad range of topics including fundamentals of 3D printing and bioprinting, followed by contemporary technology used in tissue engineering applications as well as currently available biomaterials suitable for tissue repair and regeneration. This volume provides information on: (i) why humans need biomaterials, especially in medical applications, (ii) different types of tissue engineering strategies, and (iii) modeling, characterization, and evaluation of outputs of those strategies. This book is a reference material in the field of tissue engineering, and it is very useful for bachelor, M.Sc., and Ph.D. students, researchers, academics, medical, industry, and healthcare professionals from diverse backgrounds.