Download or read book Roundwood Timber Framing written by Ben Law and published by Permanent Publications. This book was released on 2010 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This definitive manual marks the birth of a new vernacular for the 21st century. Over 400 color photographs and step-by-step instructions guide you through the building of anything from a garden shed to your own woodland house. This practical how to book will unquestionably be a benchmark for sustainable building using renewable local resources and evolving traditional skills to create durable, ecological, and beautiful buildings.
Download or read book Wood Pole Structures for Electrical Transmission Lines written by James M. McGuire and published by . This book was released on 2019 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOP 141 provides a vital overview on the design and use of wood poles for overhead utility line structures using sound engineering practices.
Download or read book Timber Pole Construction written by Lionel Jayanetti and published by Intermediate Technology Publications. This book was released on 2000 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the processes of harvesting and protecting timber poles through to specific applications in the construction of domestic and industrial buildings, and other types of construction such as bridges and retaining walls. Key areas of preservation and jointing are addressed in detail and there are illustrations throughout.
Download or read book Timber Frame Construction written by Jack A. Sobon and published by Storey Publishing, LLC. This book was released on 2012-12-10 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the satisfaction of making your own durable, economical, and environmentally friendly timber frame structures. Covering all aspects of timber frame construction, this practical guide is filled with easy-to-understand instructions, clear illustrations, and helpful photographs. With expert advice on selecting appropriate timber, necessary tools, safety considerations, joinery techniques, assembly, and raising, Jack Sobon and Roger Schroeder encourage beginners by offering complete plans for a small toolshed. Turn your dream of a timber frame house into a reality.
Download or read book Practical Pole Building Construction With Plans for Barns Cabins Outbuildings written by Leigh Seddon and published by Echo Point Books & Media, LLC. This book was released on 2021-10-12 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an emphasis on practicality and economy, this authoritative and well-illustrated how-to reference manual covers all stages of the pole building process, from initial designing and planning through to the actual construction stage.
Download or read book Timber Construction Manual written by American Institute of Timber Construction (AITC) and published by John Wiley & Sons. This book was released on 2012-07-31 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE DEFINITIVE DESIGN AND CONSTRUCTION INDUSTRY SOURCE FOR BUILDING WITH WOOD NOW IN A THOROUGHLY UPDATED SIXTH EDITION Since its first publication in 1966, Timber Construction Manual has become the essential design and construction industry resource for building with structural glued laminated timber. Timber Construction Manual, Sixth Edition provides architects, engineers, contractors, educators, and related professionals with up-to-date information on engineered timber construction, including the latest codes, construction methods, and authoritative design recommendations. Content has been reorganized to flow easily from information on wood properties and applications to specific design considerations. Based on the most reliable technical data available, this edition has been thoroughly revised to encompass: A thorough update of all recommended design criteria for timber structural members, systems, and connections An expanded collection of real-world design examples supported with detailed schematic drawings New material on the role of glulam in sustainable building practices The latest design and construction codes, including the 2012 National Design Specification for Wood Construction, AITC 117-2010, and examples featuring ASCE 7-10 and IBC 2009 More cross-referencing to other available AITC standards on the AITC website Since 1952, the AMERICAN INSTITUTE OF TIMBER CONSTRUCTION has been the national technical trade association of the structural glued laminated timber industry. AITC-recommended building and design codes for wood-based structures are considered authoritative in the United States building industry.
Download or read book Post frame Building Handbook written by Jon M. Carson and published by . This book was released on 1997 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents information on structural lumber grades, foundations, bracing, safety, structural loading, engineered wood products, stresses in wood, design load requirements, commodity storage structures, site planning, building codes, and more. For engineers, builders, and educators.
Download or read book Low Cost Pole Building Construction written by Ralph Wolfe and published by Storey Publishing, LLC. This book was released on 1980-01-05 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cost-effective and adaptable, pole buildings are the perfect solution for tool sheds, barns, or even summer homes. Low-Cost Pole Building Construction focuses on designs that provide good wind resistance with minimal grading and no need to excavate for a foundation. With full plans for a number of sample buildings that include a solar cottage, garage, and woodshed, you’ll be able to quickly and effectively build the structure you need while saving both money and time.
Download or read book The Craft of Modular Post Beam written by James Mitchell and published by Point Roberts, WA ; Vancouver : Hartley & Marks. This book was released on 1997 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the elements involved in building log homes, including design, wood, tools, joinery, and hewing methods.
Download or read book Timber Pole Construction written by Lionel Jayanetti and published by . This book was released on 1990 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Construction of Bioclimatic Wooden Greenhouses Volume 1 written by Gian Luca Brunetti and published by John Wiley & Sons. This book was released on 2023-01-19 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of four dealing with bioclimatic design and construction by focusing on the most basic and polyvalent of modern environmental systems: the bioclimatic greenhouse, the “Swiss-army chainsaw” of architecture. More specifically, this first volume focuses on preliminary bioclimatic design of greenhouses, laying down fundamental principles that are also likely to be invaluable in designing, in more general terms, bioclimatic and low-energy architecture, with low environmental impact. This multi-volume book covers both free-standing greenhouses that can naturally heat and cool themselves, and lean-to greenhouses that support the natural heating and cooling of buildings; this includes both agricultural greenhouses and greenhouses suited to host people. As a result, it is a trans-disciplinary work deriving its areas of concern from a broad range of study areas, spanning from environmental, to constructional, to structural, drawing the clarity of the approach from the fact that the topics are presented by a single author with a single voice and a designer’s mindset. To achieve this, the book adopts a composite set of explanatory strategies and communication registers – including extensive support by 3D construction drawings and examples – and presents not only stateof-the-art solutions, but also experimental ones.
Download or read book Timber Bridges written by Michael A. Ritter and published by . This book was released on 2005 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber's strength, light weight, and energy-absorbing properties furnish features desirable for bridge construction. Timber is capable of supporting short-term overloads without adverse effects. Contrary to popular belief, large wood members provide good fire resistance qualities that meet or exceed those of other materials in severe fire exposures. From an economic standpoint, wood is competitive with other materials on a first-cost basis and shows advantages when life cycle costs are compared. Timber bridges can be constructed in virtually any weather conditions, without detriment to the material. Wood is not damaged by continuous freezing and thawing and resists harmful effects of de-icing agents, which cause deterioration in other bridge materials. Timber bridges do not require special equipment for installation and can normally be constructed without highly skilled labor. They also present a natural and aesthetically pleasing appearance, particularly in natural surroundings. The misconception that wood provides a short service life has plagued timber as a construction material. Although wood is susceptible to decay or insect attack under specific conditions, it is inherently a very durable material when protected from moisture. Many covered bridges built during the 19th century have lasted over 100 years because they were protected from direct exposure to the elements. In modem applications, it is seldom practical or economical to cover bridges; however, the use of wood preservatives has extended the life of wood used in exposed bridge applications. Using modem application techniques and preservative chemicals, wood can now be effectively protected from deterioration for periods of 50 years or longer. In addition, wood treated with preservatives requires little maintenance and no painting. Another misconception about wood as a bridge material is that its use is limited to minor structures of no appreciable size. This belief is probably based on the fact that trees for commercial timber are limited in size and are normally harvested before they reach maximum size. Although tree diameter limits the size of sawn lumber, the advent of glued-laminated timber (glulam) some 40 years ago provided designers with several compensating alternatives. Glulam, which is the most widely used modem timber bridge material, is manufactured by bonding sawn lumber laminations together with waterproof structural adhesives. Thus, glulam members are virtually unlimited in depth, width, and length and can be manufactured in a wide range of shapes. Glulam provides higher design strengths than sawn lumber and provides better utilization of the available timber resource by permitting the manufacture of large wood structural elements from smaller lumber sizes. Technological advances in laminating over the past four decades have further increased the suitability and performance of wood for modern highway bridge applications.
Download or read book A Timber Framer s Workshop written by Steve Chappell and published by Joiners Quarterly Magazin. This book was released on 1998 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Portions of the manual are updated, expanded, and edited versions of articles which have previously appeared in Joiners' quarterly"--T.p. verso.
Download or read book Structural Design in Wood written by Judith J. Stalnaker and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why another textbook on the design of wood sets this book apart is its inclusion of "struc structures? In many years of teaching structural tural planning. " Most textbooks show only the design in wood, the authors have used virtually selection of member proportions or number of every textbook available, as well as using only connectors in a joint to satisfy a given, com a code and no textbook at all. The textbooks pletely defined situation. This book, on the used have included both the old and the rela other hand, shows the thinking process needed tively modem; some have been fairly good, but to determine whether or not the member is re in our opinion each has deficiencies. Some quired in the first place. Following this, the books have too few solved examples. Others spacing and continuity of the member are de omit important material or have an arrange cided, its loads are determined, and finally its ment making them difficult to use as formal shape and size are selected. teaching tools. By writing this book, we intend We believe that illustrating structural plan to correct such deficiencies. ning as well as detailed member and connec The prime purpose of this book is to serve as tion design is of considerable value in helping a classroom text for the engineering or archi the student make the transition from the often tecture student.
Download or read book Design and Construction of Bioclimatic Wooden Greenhouses Volume 3 written by Gian Luca Brunetti and published by John Wiley & Sons. This book was released on 2023-01-19 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the third of four dealing with bioclimatic design and construction by focusing on the most basic and polyvalent of modern environmental systems: the bioclimatic greenhouse, the “Swiss-army chainsaw” of architecture. More specifically, this third volume focuses on how the envelope of bioclimatic wooden greenhouses may be designed and built. In more general terms, it helps us to consider how to design and build the transparent and opaque enclosures of bioclimatic, low-energy architecture, with low environmental impact. This multi-volume book covers both free-standing greenhouses that can naturally heat and cool themselves, and lean-to greenhouses that support the natural heating and cooling of buildings; this includes both agricultural greenhouses and greenhouses suited to host people. As a result, it is a trans-disciplinary work deriving its areas of concern from a broad range of study areas, spanning from environmental, to constructional, to structural, drawing the clarity of the approach from the fact that the topics are presented by a single author with a single voice and a designer’s mindset. To achieve this, the book adopts a composite set of explanatory strategies and communication registers – including extensive support by 3D construction drawings and examples – and presents not only stateof-the-art solutions, but also experimental ones.
Download or read book Building Structures written by James E. Ambrose and published by John Wiley & Sons. This book was released on 1993 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction Details From Architectural Graphic Standards Eighth Edition Edited by James Ambrose A concise reference tool for the professional involved in the production of details for building construction, this abridgement of the classic Architectural Graphic Standards provides indispensable guidance on standardizing detail work, without having to create the needed details from scratch. An ideal "how to" manual for the working draftsperson, this convenient, portable edition covers general planning and design data, sitework, concrete, masonry, metals, wood, doors and windows, finishes, specialties, equipment, furnishings, special construction, energy design, historic preservation, and more. Construction Details also includes extensive references to additional information as well as AGS’s hallmark illustrations. 1991 (0 471-54899-5) 408 pp. Fundamentals of Building Construction Materials And Methods Second Edition Edward Allen "A thoughtful overview of the entire construction industry, from homes to skyscrapers…there’s plenty here for the aspiring tradesperson or anyone else who’s fascinated by the art of building." —Fine Homebuilding Beginning with the materials of the ancients—wood, stone, and brick—this important work is a guide to the structural systems that have made these and more contemporary building materials the irreplaceable basics of modern architecture. Detailing the structural systems most widely used today—heavy timber framing, wood platform framing, masonry loadbearing wall, structural steel framing, and concrete framing systems—the book describes each system’s historical development, how the major material is obtained and processed, tools and working methods, as well as each system’s relative merits. Designed as a primer to building basics, the book features a list of key terms and concepts, review questions and exercises, as well as hundreds of drawings and photographs, illustrating the materials and methods described. 1990 (0 471-50911-6) 803 pp. Mechanical and Electrical Equipment for Buildings Eighth Edition Benjamin Stein and John S. Reynolds "The book is packed with useful information and has been the architect’s standard for fifty years." —Electrical Engineering and Electronics on the seventh edition More up to date than ever, this reference classic provides valuable insights on the new imperatives for building design today. The Eighth Edition details the impact of computers, data processing, and telecommunications on building system design; the effects of new, stringent energy codes on building systems; and computer calculation techniques as applied to daylighting and electric lighting design. As did earlier editions, the book provides the basic theory and design guidelines for both systems and equipment, in everything from heating and cooling, water and waste, fire and fire protection systems, lighting and electrical wiring, plumbing, elevators and escalators, acoustics, and more. Thoroughly illustrated, the book is a basic primer on making comfort and resource efficiency integral to the design standard. 1991 (0 471-52502-2) 1,664 pp.
Download or read book Pole and Tower Lines for Electric Power Transmission written by Robert Duncan Coombs and published by . This book was released on 1916 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
