Download or read book Timber fasteners a study on input parameters for the design of timber joints written by Sandhaas, Carmen and published by KIT Scientific Publishing. This book was released on 2024-05-13 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current design rules for timber joints with dowel-type fasteners require input parameters such as yield moment and withdrawal capacity, which are determined within the European framework of certification testing. Databases containing these data were assembled. A large scatter was observed. Bespoke series may deliver clear trends. If representative data is considered, these clear trends vanish. Globally valid regression equations are conservative leading to incorrect prediction of failure modes.
Download or read book Displacement based seismic design for multi storey cross laminated timber buildings written by Hummel, Johannes and published by kassel university press GmbH. This book was released on 2017 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Key Terms: cross laminated timber, displacement-based seismic design, time history analysis, multi-storey timber structures, hysteretic behaviour
Download or read book PRO 22 International RILEM Symposium on Joints in Timber Structures written by Simon Aicher and published by RILEM Publications. This book was released on 2001 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book InCIEC 2015 written by Marina Yusoff and published by Springer. This book was released on 2016-06-18 with total page 983 pages. Available in PDF, EPUB and Kindle. Book excerpt: The special focus of these proceedings is on the areas of infrastructure engineering and sustainability management. They provide detailed information on innovative research developments in construction materials and structures, in addition to a compilation of interdisciplinary findings combining nano-materials and engineering. The coverage of cutting-edge infrastructure and sustainability issues in engineering includes earthquakes, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems.
Download or read book Safety Reliability Risk and Life Cycle Performance of Structures and Infrastructures written by George Deodatis and published by CRC Press. This book was released on 2014-02-10 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures contains the plenary lectures and papers presented at the 11th International Conference on STRUCTURAL SAFETY AND RELIABILITY (ICOSSAR2013, New York, NY, USA, 16-20 June 2013), and covers major aspects of safety, reliability, risk and life-cycle performance of str
Download or read book Mechanical Connections in Wood Structures written by American Society of Civil Engineers. Task Committee on Fasteners and published by American Society of Civil Engineers. This book was released on 1996 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual presents current design practices and research information on mechanical fasteners used in wood connections in the United States and abroad. Chapters review a vast array of connections, including nails, spikes, and staples; lag screws and wood screws; bolts, drift bolts, and pins; metal connector plates, and timber connectors. Issues addressed range from materials and basic design criteria to fabrication practices, installation practices, connection details and the research basis for design practice.
Download or read book Hydro Environmental Analysis written by James L. Martin and published by CRC Press. This book was released on 2013-12-04 with total page 5742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on fundamental principles, Hydro-Environmental Analysis: Freshwater Environments presents in-depth information about freshwater environments and how they are influenced by regulation. It provides a holistic approach, exploring the factors that impact water quality and quantity, and the regulations, policy and management methods that are necessary to maintain this vital resource. It offers a historical viewpoint as well as an overview and foundation of the physical, chemical, and biological characteristics affecting the management of freshwater environments. The book concentrates on broad and general concepts, providing an interdisciplinary foundation. The author covers the methods of measurement and classification; chemical, physical, and biological characteristics; indicators of ecological health; and management and restoration. He also considers common indicators of environmental health; characteristics and operations of regulatory control structures; applicable laws and regulations; and restoration methods. The text delves into rivers and streams in the first half and lakes and reservoirs in the second half. Each section centers on the characteristics of those systems and methods of classification, and then moves on to discuss the physical, chemical, and biological characteristics of each. In the section on lakes and reservoirs, it examines the characteristics and operations of regulatory structures, and presents the methods commonly used to assess the environmental health or integrity of these water bodies. It also introduces considerations for restoration, and presents two unique aquatic environments: wetlands and reservoir tailwaters. Written from an engineering perspective, the book is an ideal introduction to the aquatic and limnological sciences for students of environmental science, as well as students of environmental engineering. It also serves as a reference for engineers and scientists involved in the management, regulation, or restoration of freshwater environments.
Download or read book Materials and Joints in Timber Structures written by Simon Aicher and published by Springer Science & Business Media. This book was released on 2013-09-25 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended options for tailor-made bonding solutions have to be stated. Apart from melamine-urea and phenolic-resorcinol adhesives, one-component-polyurethanes, emulsion isocyanate polymers and epoxies offer a wide range of possibilities. The contributions dealing with experimental and numerical investigations on static, cyclic and seismic behavior of structures clearly reveal the enhanced potential of modern timber construction for reliable and sustainable buildings and bridges of the new millennium. The book is structured in nine thematic areas, being I) Structures II) Mechanical Connections III) Glued Joints and Adhesives IV) Timber and Concrete/Cement/Polymer Composites V) Cyclic, Seismic Behavior VI) Hardwood, Modified Wood and Bamboo VII) Cross-Laminated Timber VIII) Properties and Testing of Wood IX) Glulam
Download or read book Dividends from Wood Research written by and published by . This book was released on 1991-07 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Review of Published Research Into Design of Mechanically fastened Joints in Timber written by A. V. Page and published by . This book was released on 1991 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cross Laminated Timber Design Structural Properties Standards and Safety written by Mustafa Mahamid and published by McGraw Hill Professional. This book was released on 2020-03-27 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Master the practice of designing structures with cross-laminated timber This comprehensive guide explains the design standards, safety protocols, and codes and regulations engineers need to know to use cross-laminated timber as a structural building material. Featuring contributions from experts in the field, Cross-Laminated Timber Design: Structural Properties, Standards, and Safety introduces the material properties of CLT and goes on to cover the recommended lateral and vertical design techniques. You will get clear explanations of all relevant NDS, ASCE 7, and IBC provisions along with real-world examples and case studies. Sustainability and environmental issues are discussed in full detail. Coverage includes: • An introduction to cross-laminated timber • Product standards for cross-laminated timber • Structural design—gravity • Structural design—lateral • Structural connections • Building envelope design with cross-laminated timber • Acoustics for CLT projects • Fire for CLT projects • Environmental aspects of CLT as a construction material • Sustainability of cross-laminated timber
Download or read book Timber Engineering written by Sven Thelandersson and published by John Wiley & Sons. This book was released on 2003-03-14 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber construction is one of the most prevalent methods of constructing buildings in North America and an increasingly significant method of construction in Europe and the rest of the world. Timber Engineering deals not only with the structural aspects of timber construction, structural components, joints and systems based on solid timber and engineered wood products, but also material behaviour and properties on a wood element level. Produced by internationally renowned experts in the field, this book represents the state of the art in research on the understanding of the material behaviour of solid wood and engineered wood products. There is no comparable compendium currently available on the topic - the subjects represented include the most recent phenomena of timber engineering and the newest development of practice-related research. Grouped into three different sections, 'Basic properties of wood-based structural elements', 'Design aspects on timber structures' and 'Joints and structural assemblies', this book focuses on key issues in the understanding of: timber as a modern engineered construction material with controlled and documented properties the background for design of structural systems based on timber and engineered wood products the background for structural design of joints in structural timber systems Furthermore, this invaluable book contains advanced teaching material for all technical schools and universities involved in timber engineering. It also provides an essential resource for timber engineering students and researchers, as well as practicing structural and civil engineers.
Download or read book Reinforcement of Timber Elements in Existing Structures written by Jorge Branco and published by Springer Nature. This book was released on 2021-04-30 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: By presenting the work of the RILEM Technical Committee 245-RTE, the book provides an overview of the existing techniques for the reinforcement of timber elements, joints and structures. It consists of two parts: part I examines state-of-the-art information on reinforcement techniques, summarizes the current status of standardization, and covers STS, GiR, FRP and nanotechnology. In part II several applications of reinforcement are discussed: these include traditional structures, traditional timber frame walls, light-frame shear walls, roofs, floors, and carpentry joints. The book will benefit academics, practitioners, industry and standardization committees interested in the reinforcement of existing timber elements, joints and structures.
Download or read book Design of Connections in Timber Structures written by Thomas K. Bader and published by . This book was released on 2018 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Determination of the strength parameters needed to determine the load-carrying capacity of a single dowel-type fastener and on the load distribution among fasteners in a group as well as methods to avoid brittle failure modes in the timber around the fastener or group of fasteners. Also ease of use has been addressed. The design of carpentry joints is dealt with, too, as such connections now can take advantage of the precision of modern wood working." -- introducció.
Download or read book Advanced Timber Structures written by Yves Weinand and published by Birkhäuser. This book was released on 2016-12-19 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood is usually perceived as a "traditional" material. However, the properties of this material have now for some time made it possible to design free shapes and highly complex structures. Today, the wood laboratory of the EPF Lausanne, which was originally founded by Julius Natterer, is testing the production of origami structures, ribbed shells, fabric structures and curved panels under the guidance of Professor Weinand using digital calculation and computer-aided processing methods. The research results are tested in prototypes, which demonstrate the potential applications in large-scale timber buildings. By exploring the hitherto unused potential of wood as a construction material, this book provides an exciting and inspiring outlook on a new generation of timber buildings.
Download or read book The Design of Timber Joints Using Metal Fasteners in Relation to Milling Tolerances for Timber Thickness written by U. Soe Tint and published by . This book was released on 1976 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Joints and Fasteners in Timber Engineering written by R. S. Beckett and published by . This book was released on 1987 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
