Download or read book Titanium written by Gerd Lütjering and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors were motivated to prepare this book by the absence of any recent comprehensive book on titanium. The intent of this book is to provide a modern compendium that addresses both the phyical metallurgy as well as the applications of titanium. Until now the only book on this subject is that by Zwicker which was written in German and published almost 30 years ago. Chapter 1 is an introduction to the subject including some historical aspects of titanium. Chapter 2 is a s- mary of the Fundamental Aspects of Titanium, Chapter 3 is a summary of the Technological Aspects of Titanium and Chapters 4 through 9 address the specifics of the various classes of titanium ranging from CP Titanium to Titanium Matrix Composites. Finally, Chapter 10 covers “special” properties and applications of titanium. Our intent has been to address the subject conceptually rather than provide quantities of data of the sort that would be found in a Handbook. It is our intent that this book is useful for materials scientists and engineers interested in using titanium and for students either as a sourcebook or as a textbook. We have - tempted to include a representative set of references which provide additional detail for readers interested in specific aspects of titanium. Because of the re- tively recent growth of the technological importance of titanium, there is a vo- minous literature on titanium. While our references span this literature it has proven impossible to mention every contribution.

Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 4024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.

Download or read book Materials Handbook written by François Cardarelli and published by Springer. This book was released on 2018-07-09 with total page 2302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique and practical Materials Handbook (third edition) provides quick and easy access to the physical and chemical properties of very many classes of materials. Its coverage has been expanded to include whole new families of materials such as minor metals, ferroalloys, nuclear materials, food, natural oils, fats, resins, and waxes. Many of the existing families—notably the metals, gases, liquids, minerals, rocks, soils, polymers, and fuels—are broadened and refined with new material and up-to-date information. Several of the larger tables of data are expanded and new ones added. Particular emphasis is placed on the properties of common industrial materials in each class. After a chapter introducing some general properties of materials, each of twenty-four classes of materials receives attention in its own chapter. The health and safety issues connected with the use and handling of industrial materials are included. Detailed appendices provide additional information on subjects as diverse as crystallography, spectroscopy, thermochemical data, analytical chemistry, corrosion resistance, and economic data for industrial and hazardous materials. Specific further reading sections and a general bibliography round out this comprehensive guide. The index and tabular format of the book makes light work of extracting what the reader needs to know from the wealth of factual information within these covers. Dr. François Cardarelli has spent many years compiling and editing materials data. His professional expertise and experience combine to make this handbook an indispensable reference tool for scientists and engineers working in numerous fields ranging from chemical to nuclear engineering. Particular emphasis is placed on the properties of common industrial materials in each class. After a chapter introducing some general properties of materials, materials are classified as follows. ferrous metals and their alloys; ferroalloys; common nonferrous metals; less common metals; minor metals; semiconductors and superconductors; magnetic materials; insulators and dielectrics; miscellaneous electrical materials; ceramics, refractories and glasses; polymers and elastomers; minerals, ores and gemstones; rocks and meteorites; soils and fertilizers; construction materials; timbers and woods; fuels, propellants and explosives; composite materials; gases; liquids; food, oils, resin and waxes; nuclear materials. food materials

Download or read book X Rays and Materials written by Philippe Goudeau and published by John Wiley & Sons. This book was released on 2013-05-06 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents reviews of various aspects of radiation/matter interactions, be these instrumental developments, the application of the study of the interaction of X-rays and materials to a particular scientific field, or specific methodological approaches. The overall aim of the book is to provide reference summaries for a range of specific subject areas within a pedagogical framework. Each chapter is written by an author who is well known within their field and who has delivered an invited lecture on their subject area as part of the “RX2009 – X-rays and Materials” colloquium that took place in December 2009 at Orsay in France. The book consists of five chapters on the subject of X-ray diffraction, scattering and absorption. Chapter 1 gives a detailed presentation of the capabilities and potential of beam lines dedicated to condensed matter studies at the SOLEIL synchrotron radiation source. Chapter 2 focuses on the study of nanoparticles using small-angle X-ray scattering. Chapter 3 discusses the quantitative studies of this scattering signal used to analyze these characteristics in detail. Chapter 4 discusses relaxor materials, which are ceramics with a particularly complex microstructure. Chapter 5 discusses an approach enabling the in situ analysis of these phase transitions and their associated microstructural changes.

Download or read book Aerospace Materials and Material Technologies written by N. Eswara Prasad and published by Springer. This book was released on 2016-11-07 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a comprehensive resource on various traditional, advanced and futuristic material technologies for aerospace applications encompassing nearly 20 major areas. Each of the chapters addresses scientific principles behind processing and production, production details, equipment and facilities for industrial production, and finally aerospace application areas of these material technologies. The chapters are authored by pioneers of industrial aerospace material technologies. This book has a well-planned layout in 4 parts. The first part deals with primary metal and material processing, including nano manufacturing. The second part deals with materials characterization and testing methodologies and technologies. The third part addresses structural design. Finally, several advanced material technologies are covered in the fourth part. Some key advanced topics such as “Structural Design by ASIP”, “Damage Mechanics-Based Life Prediction and Extension” and “Principles of Structural Health Monitoring” are dealt with at equal length as the traditional aerospace materials technology topics. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.

Download or read book Advanced Technologies for Security Applications written by Claudio Palestini and published by Springer Nature. This book was released on 2020-06-26 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology has been the spark that ignited NATO’s interest and commitment to scientific advancement during its history. Since its creation, the Science for Peace and Security (SPS) Programme has been instrumental to NATO’s commitment to innovation, science and technological advancement. During the years, SPS has demonstrated a flexible and versatile approach to practical scientific cooperation, and has promoted knowledge-sharing, building capacity, and projected stability outside NATO territory. The priorities addressed by the SPS Programme are aligned with NATO’s strategic objectives, and aim to tackle emerging security challenges that require dynamic adaptation for the prevention and mitigation of risks. By addressing priorities such as advanced technologies, hybrid threats, and counter-terrorism, the Programme deals with new, contemporary challenges. On 17-18 September 2019, the SPS Programme gathered at the KU Leuven University a wide number of researchers from a selection of on-going and recently closed SPS projects in the field of security-related advanced technologies for a “Cluster Workshop on Advanced Technologies”. The workshop covered, in particular, the following scientific domains: communication systems, advanced materials, sensors and detectors, and unmanned and autonomous systems. This book provides an overview on how these projects have contributed to the development of new technologies and innovative solutions and recommendations for future actions in the NATO SPS programme.

Download or read book Medical Device Materials IV written by Jeremy Gilbert and published by ASM International. This book was released on 2008-01-01 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Proceedings from the only conference on medical devices that brings together scientists and product, research, design and development engineers from around the globe to present the latest developments in materials, processes, product performance and new technologies for medical/dental devices." "This volume includes contributions from the world's foremost experts from academia, industry, and national laboratories involved in cardiac, vascular, neurological, and orthopaedic implants, dental devices, and surgical instrumentation/devices." "Materials addressed include biomedical alloys (stainless steels, titanium alloys, cobalt-chromium alloys, nickel-titanium alloys, noble and refractory metals) biopolymers, bioceramics, surface coatings, and nanomaterials." "Topics covered include: degradation, wear fracture, corrosion, processing, biomimetics, biocompatibility, bioelectric phenomena and electrode behavior, surface engineering, and cell-material interactions."--BOOK JACKET.

Download or read book Extractive Metallurgy of Titanium written by Zhigang Zak Fang and published by Elsevier. This book was released on 2019-11-08 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extractive Metallurgy of Titanium: Conventional and Recent Advances in Extraction and Production of Titanium Metal contains information on current and developing processes for the production of titanium. The methods for producing Ti metal are grouped into two categories, including the reduction of TiCl4 and the reduction of TiO2, with their processes classified as either electrochemical or thermochemical. Descriptions of each method or process include both the fundamental principles of the method and the engineering challenges in their practice. In addition, a review of the chemical and physical characteristics of the product produced by each method is included. Sections cover the purity of titanium metal produced based on ASTM and other industry standards, energy consumption, cost and the potential environmental impacts of the processes. - Provides information on new and developing low cost, high integrity methods for titanium metal production - Discusses new markets for titanium due to the decreased cost of newly developed processes - Covers specific information on new methods, including the chemical and physical characteristics produced

Download or read book Environmental Degradation of Advanced and Traditional Engineering Materials written by Lloyd H. Hihara and published by CRC Press. This book was released on 2013-10-23 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the main, ongoing challenges for any engineering enterprise is that systems are built of materials subject to environmental degradation. Whether working with an airframe, integrated circuit, bridge, prosthetic device, or implantable drug-delivery system, understanding the chemical stability of materials remains a key element in determining their useful life. Environmental Degradation of Advanced and Traditional Engineering Materials is a monumental work for the field, providing comprehensive coverage of the environmental impacts on the full breadth of materials used for engineering infrastructure, buildings, machines, and components. The book discusses fundamental degradation processes and presents examples of degradation under various environmental conditions. Each chapter presents the basic properties of the class of material, followed by detailed characteristics of degradation, guidelines on how to protect against corrosion, and a description of testing procedures. A complete, self-contained industrial reference guide, this valuable resource is designed for students and professionals interested in the development of deterioration-resistant technological systems constructed with metallurgical, polymeric, ceramic, and natural materials.

Download or read book Manufacturing Process Technology written by Zheng Yi Jiang and published by Trans Tech Publications Ltd. This book was released on 2011-02-21 with total page 4571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the International Conference on Manufacturing Science and Engineering (ICMSE 2011), 9-11 April, 2011, Guilin, China

Download or read book Proceedings of the 12th International Conference on Advanced Materials and Engineering Materials written by Laichang Zhang and published by Springer Nature. This book was released on with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sintering of Advanced Materials written by Zhigang Zak Fang and published by Elsevier. This book was released on 2010-09-27 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is a method for manufacturing components from ceramic or metal powders by heating the powder until the particles adhere to form the component required. The resulting products are characterised by an enhanced density and strength, and are used in a wide range of industries. Sintering of advanced materials: fundamentals and processes reviews important developments in this technology and its applicationsPart one discusses the fundamentals of sintering with chapters on topics such as the thermodynamics of sintering, kinetics and mechanisms of densification, the kinetics of microstructural change and liquid phase sintering. Part two reviews advanced sintering processes including atmospheric sintering, vacuum sintering, microwave sintering, field/current assisted sintering and photonic sintering. Finally, Part three covers sintering of aluminium, titanium and their alloys, refractory metals, ultrahard materials, thin films, ultrafine and nanosized particles for advanced materials.With its distinguished editor and international team of contributors, Sintering of advanced materials: fundamentals and processes reviews the latest advances in sintering and is a standard reference for researchers and engineers involved in the processing of ceramics, powder metallurgy, net-shape manufacturing and those using advanced materials in such sectors as electronics, automotive and aerospace engineering. - Explores the thermodynamics of sintering including sinter bonding and densification - Chapters review a variety of sintering methods including atmosphere, vacuum, liquid phase and microwave sintering - Discusses sintering of a variety of materials featuring refractory metals, super hard materials and functionally graded materials

Download or read book Titanium Alloys written by A.K.M. Nurul Amin and published by BoD – Books on Demand. This book was released on 2012-03-16 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first section of the book includes the following topics: fusion-based additive manufacturing (AM) processes of titanium alloys and their numerical modelling, mechanism of ?-case formation mechanism during investment casting of titanium, genesis of gas-containing defects in cast titanium products. Second section includes topics on behavior of the (? + ?) titanium alloys under extreme pressure and temperature conditions, hot and super plasticity of titanium (? + ?) alloys and some machinability aspects of titanium alloys in drilling. Finally, the third section includes topics on different surface treatment methods including nanotube-anodic layer formation on two phase titanium alloys in phosphoric acid for biomedical applications, chemico-thermal treatment of titanium alloys applying nitriding process for improving corrosion resistance of titanium alloys.

Download or read book Mechanical Alloying of Ferrous and Non Ferrous Alloys written by Shashanka Rajendrachari and published by Elsevier. This book was released on 2024-06-19 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth exploration of ferrous and non-ferrous alloys including various methods of preparation and production, their mechanical properties, and applications. The advantages of the mechanical alloying processing approach over other traditional powder metallurgical techniques is explained as are which alloys are best suited for this technique. Preparation steps, microstructures, properties, and applications for ferrous and non-ferrous alloys are compared, with insight on which alloys are best suited for preparation by alloying. The advantages and disadvantages of wet and dry milling are outlined. Processing, properties, and applications of high entropy alloys, ODS stainless steel, shape memory alloys, cermets, iron, copper, zinc, tungsten, aluminum, titanium, magnesium, and ceramic-based alloys are also covered, as are different powder preparation techniques and sintering methods. - Outlines the different types of mechanical alloying used to prepare powders, their mechanisms, factors affecting the process, and more - Covers the manufacturing, characteristics, and applications of high entropy alloys, ODS stainless steel, shape memory alloys, magnesium, ceramic-based alloys, and more - Compares preparation of ferrous and non-ferrous alloys, their microstructures, and properties - Discusses the advantages and disadvantages of wet and dry milling

Download or read book Advanced Materials and Manufacturing Technology IV written by Hun Guo and published by Trans Tech Publications Ltd. This book was released on 2020-10-05 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer-reviewed papers only

Download or read book Titanium Alloys for Biomedical Development and Applications written by Zhentao Yu and published by Elsevier. This book was released on 2022-01-21 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Alloys for Biomedical Development and Applications: Design, Microstructure, Properties and Application systematically introduces basic theories and progress in the research of biomedical ß-Ti alloys achieved by researchers from different fields. It focuses on a high-strength and low elastic modulus biomedical ß-Ti alloy (TLM), etc. designed by the authors. The alloy design methods, microstructural characteristics, mechanical properties, surface treatment methods and biocompatibility of the TLM alloy are discussed in detail, along with a concise description of the medical devices made from this alloy and the application examples. This book will appeal to researchers as well as students from different disciplines, including materials science, biology, medicine and engineering fields. - Fills the knowledge gap in the current research and application of newly developed biomedical ß-Ti alloys - Discusses the selection principles used for proper biomedical Ti alloys for medical and dental devices - Includes details on the technological data basis for the application of biomedical ß-Ti alloys with a focus on the TLM ß-Ti alloy

Download or read book The Cambridge History of Science Volume 8 Modern Science in National Transnational and Global Context written by Hugh Richard Slotten and published by Cambridge University Press. This book was released on 2020-04-09 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume in the highly respected Cambridge History of Science series is devoted to exploring the history of modern science using national, transnational, and global frames of reference. Organized by topic and culture, its essays by distinguished scholars offer the most comprehensive and up-to-date nondisciplinary history of modern science currently available. Essays are grouped together in separate sections that represent larger regions: Europe, Africa, the Middle East, South Asia, East and Southeast Asia, the United States, Canada, Australia, New Zealand, Oceania, and Latin America. Each of these regional groupings ends with a separate essay reflecting on the analysis in the preceding chapters. Intended to provide a balanced and inclusive treatment of the modern world, contributors analyze the history of science not only in local, national, and regional contexts but also with respect to the circulation of knowledge, tools, methods, people, and artifacts across national borders.