Download or read book Three Phase Electrical Power written by Joseph E. Fleckenstein and published by CRC Press. This book was released on 2017-12-19 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Phase Electrical Power addresses all aspects of three-phase power circuits. The book treats the transmission of electrical power from the common sources where it is generated to locations where it is consumed. At typical facilities where electrical power is used, the book covers the important topics of grounding, currents, power, demand, metering, circuit protection, motors, motor protection, power factor correction, tariffs, electrical drawings, and relays. Included in the text are the necessary methods of computing currents and power in all possible types of circuit applications as those that are balanced, unbalanced, leading, lagging, three-wire, and four-wire. Focusing on electrical gear, programs, and issues related to the generation and use of three-phase electrical power, this contemporary educational guide: Uses simple, straightforward language to explain key concepts and their underlying theory Introduces numerous examples, illustrations, and photographs to aid in comprehension Employs phasor concepts throughout the text to aid in the analysis of three-phase circuits Encourages applied learning by supplying practical problems at the end of each chapter Provides extensive references and a glossary of symbols, acronyms, and equations Three-Phase Electrical Power delivers a much-needed modern-day treatment of three-phase electrical power for electrical engineering students and practitioners alike.
Download or read book Three phase Systems written by Sandro Ronca and published by Sandro Ronca. This book was released on 2024-04-15 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-phase alternating current system is universally used in production, transmission and utilization of electrical energy. Knowledge of the concepts and principles underlying its operation, as well as the methods of measuring characteristic quantities, is essential baggage for the technician skilled in electrical and electronic technologies. The present volume, divided into three chapters: the three-phase system, three-phase power, and the measurement of three-phase power, enables the acquisition and deepening of the knowledge necessary to successfully tackle the courses of Electrical and Electronic Engineering of Technical Institutes, technological sector and is preparatory to university courses. The text is accompanied by many illustrations that are particularly well edited for their didactic aspects. Each concept developed is followed by one or more explanatory examples and often concise summaries. To test the knowledge acquired at the end of the chapters there will be significant problems to solve. SANDRO RONCA After studying Physics at the University of Padua, he dedicated himself to teaching Electrical and Electronic Technologies and Computer Science at Technical and Technological Institutes, paying attention to the didactic aspects of the subject. He has studied computer networks in depth and designed, at the request of industrial associations, courses for systems engineers and IT security workers.
Download or read book Three Phase Electrical Power written by Joseph E. Fleckenstein and published by CRC Press. This book was released on 2017-12-19 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Phase Electrical Power addresses all aspects of three-phase power circuits. The book treats the transmission of electrical power from the common sources where it is generated to locations where it is consumed. At typical facilities where electrical power is used, the book covers the important topics of grounding, currents, power, demand, metering, circuit protection, motors, motor protection, power factor correction, tariffs, electrical drawings, and relays. Included in the text are the necessary methods of computing currents and power in all possible types of circuit applications as those that are balanced, unbalanced, leading, lagging, three-wire, and four-wire. Focusing on electrical gear, programs, and issues related to the generation and use of three-phase electrical power, this contemporary educational guide: Uses simple, straightforward language to explain key concepts and their underlying theory Introduces numerous examples, illustrations, and photographs to aid in comprehension Employs phasor concepts throughout the text to aid in the analysis of three-phase circuits Encourages applied learning by supplying practical problems at the end of each chapter Provides extensive references and a glossary of symbols, acronyms, and equations Three-Phase Electrical Power delivers a much-needed modern-day treatment of three-phase electrical power for electrical engineering students and practitioners alike.
Download or read book Vector Control of Three Phase AC Machines written by Nguyen Phung Quang and published by Springer. This book was released on 2015-05-14 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the vector control of three-phase AC machines, in particular induction motors with squirrel-cage rotors (IM), permanent magnet synchronous motors (PMSM) and doubly-fed induction machines (DFIM), from a practical design and development perspective. The main focus is on the application of IM and PMSM in electrical drive systems, where field-orientated control has been successfully established in practice. It also discusses the use of grid-voltage oriented control of DFIMs in wind power plants. This second, enlarged edition includes new insights into flatness-based nonlinear control of IM, PMSM and DFIM. The book is useful for practitioners as well as development engineers and designers in the area of electrical drives and wind-power technology. It is a valuable resource for researchers and students.
Download or read book Active Power Line Conditioners written by Patricio Salmeron Revuelta and published by Academic Press. This book was released on 2015-07-31 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Active Power Line Conditioners: Design, Simulation and Implementation for Improving Power Quality presents a rigorous theoretical and practical approach to active power line conditioners, one of the subjects of most interest in the field of power quality. Its broad approach offers a journey that will allow power engineering professionals, researchers, and graduate students to learn more about the latest landmarks on the different APLC configurations for load active compensation. By introducing the issues and equipment needs that arise when correcting the lack of power quality in power grids, this book helps define power terms according to the IEEE Standard 1459. Detailed chapters discuss instantaneous reactive power theory and the theoretical framework that enabled the practical development of APLCs, in both its original and modified formulations, along with other proposals. Different APLCs configurations for load compensation are explored, including shunt APF, series APF, hybrid APF, and shunt combined with series APF, also known as UPQC. The book includes simulation examples carefully developed and ready for download from the book’s companion website, along with different case studies where real APLCs have been developed. Finally, the new paradigm brought by the emergence of distribution systems with dispersed generation, such as the use of small power units based on gas technology or renewable energy sources, is discussed in a chapter where mitigation technologies are addressed in a distributed environment. Combines the development of theories, control strategies, and the most widespread practical implementations of active power line conditioners, along with the most recent new approaches Details updated and practical content on periodic disturbances mitigation technologies with special emphasis on distributed generation systems Includes over 28 practical simulation examples in Matlab-Simulink which are available for download at the book’s companion website, with 4 reproducible case studies from real APLCs
Download or read book Short circuit Currents in Three phase Systems written by Richard Roeper and published by . This book was released on 1985 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Three Phase Diode Rectifiers with Low Harmonics written by Predrag Pejovic and published by Springer Science & Business Media. This book was released on 2007-07-31 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews numerous research papers published in the last fifteen years in the area of current injection based rectifiers. A partial list of coverage includes analysis of various magnetic current injection devices, the third harmonic current injection, injection networks, and optimal current injection. The book will be of interest to professionals involved in design of low-harmonic three-phase rectifiers, as well as students and researchers.
Download or read book Three phase Conversion written by Graham Astbury and published by Workshop Practice. This book was released on 2010-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an invaluable source of practical guidance on how anyone can find out the type of electrical equipment they have, and how to convert it to run on a single-phase supply. It offers calculations, step-by-step instructions with photographs and diagrams and also advises on which equipment cannot be converted at all.
Download or read book Electrical Power System Essentials written by Pieter Schavemaker and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The electrical power supply is about to change; future generation will increasingly take place in and near local neighborhoods with diminishing reliance on distant power plants. The existing grid is not adapted for this purpose as it is largely a remnant from the 20th century. Can the grid be transformed into an intelligent and flexible grid that is future proof? This revised edition of Electrical Power System Essentials contains not only an accessible, broad and up-to-date overview of alternating current (AC) power systems, but also end-of-chapter exercises in every chapter, aiding readers in their understanding of the material introduced. With an original approach the book covers the generation of electric energy from thermal power plants as from renewable energy sources and treats the incorporation of power electronic devices and FACTS. Throughout there are examples and case studies that back up the theory or techniques presented. The authors set out information on mathematical modelling and equations in appendices rather than integrated in the main text. This unique approach distinguishes it from other text books on Electrical Power Systems and makes the resource highly accessible for undergraduate students and readers without a technical background directly related to power engineering. After laying out the basics for a steady-state analysis of the three-phase power system, the book examines: generation, transmission, distribution, and utilization of electric energy wind energy, solar energy and hydro power power system protection and circuit breakers power system control and operation the organization of electricity markets and the changes currently taking place system blackouts future developments in power systems, HVDC connections and smart grids The book is supplemented by a companion website from which teaching materials can be downloaded. https://www.wiley.com//legacy/wileychi/powersystem/material.html
Download or read book Practical Power System Protection written by Leslie Hewitson and published by Newnes. This book was released on 2005-02-28 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to increase understanding on a practical and theoretical basis, this invaluable resource provides engineers, plant operators, electricians and technicians with a thorough grounding in the principles and practicalities behind power system protection. Coverage of the fundamental knowledge needed to specify, use and maintain power protection systems is included, helping readers to increase plant efficiency, performance and safety. Consideration is also given to the practical techniques and engineering challenges encountered on a day-to-day basis, making this an essential resource for all.
Download or read book The Power Grid written by Brian D’Andrade and published by Academic Press. This book was released on 2017-03-03 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Power Grid: Smart, Secure, Green and Reliable offers a diverse look at the traditional engineering and physics aspects of power systems, also examining the issues affecting clean power generation, power distribution, and the new security issues that could potentially affect the availability and reliability of the grid. The book looks at growth in new loads that are consuming over 1% of all the electrical power produced, and how combining those load issues of getting power to the regions experiencing growth in energy demand can be addressed. In addition, it considers the policy issues surrounding transmission line approval by regulators. With truly multidisciplinary content, including failure analysis of various systems, photovoltaic, wind power, quality issues with clean power, high-voltage DC transmission, electromagnetic radiation, electromagnetic interference, privacy concerns, and data security, this reference is relevant to anyone interested in the broad area of power grid stability. Discusses state–of-the-art trends and issues in power grid reliability Offers guidance on purchasing or investing in new technologies Includes a technical document relevant to public policy that can help all stakeholders understand the technical issues facing a green, secure power grid
Download or read book AC Circuits and Power Systems in Practice written by Graeme Vertigan and published by John Wiley & Sons. This book was released on 2017-12-18 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential guide that combines power system fundamentals with the practical aspects of equipment design and operation in modern power systems Written by an experienced power engineer, AC Circuits and Power Systems in Practice offers a comprehensive guide that reviews power system fundamentals and network theorems while exploring the practical aspects of equipment design and application. The author covers a wide-range of topics including basic circuit theorems, phasor diagrams, per-unit quantities and symmetrical component theory, as well as active and reactive power and their effects on network stability, voltage support and voltage collapse. Magnetic circuits, reactor and transformer design are analyzed, as is the operation of step voltage regulators. In addition, detailed introductions are provided to earthing systems in LV and MV networks, the adverse effects of harmonics on power equipment and power system protection. Finally, European and American engineering standards are presented where appropriate throughout the text, to familiarize the reader with their use and application. This book is written as a practical power engineering text for engineering students and recent graduates. It contains more than 400 illustrations and is designed to provide the reader with a broad introduction to the subject and to facilitate further study. Many of the examples included come from industry and are not normally covered in undergraduate syllabi. They are provided to assist in bridging the gap between tertiary study and industrial practice, and to assist the professional development of recent graduates. The material presented is easy to follow and includes both mathematical and visual representations using phasor diagrams. Problems included at the end of most chapters are designed to walk the reader through practical applications of the associated theory.
Download or read book Practical Control of Electric Machines written by Rubén Molina Llorente and published by Springer Nature. This book was released on 2020-03-20 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents deep analysis of machine control for different applications, focusing on its implementation in embedded systems. Necessary peripherals for various microcontroller families are analysed for machine control and software architecture patterns for high-quality software development processes in motor control units are described. Abundant figures help the reader to understand the theoretical, simulation and practical implementation stages of machine control. Model-based design, used as a mathematical and visual approach to construction of complex control algorithms, code generation that eliminates hand-coding errors, and co-simulation tools such as Simulink, PSIM and finite element analysis are discussed. The simulation and verification tools refine, and retest the models without having to resort to prototype construction. The book shows how a voltage source inverter can be designed with tricks, protection elements, and space vector modulation. Practical Control of Electric Machines: Model-Based Design and Simulation is based on the author’s experience of a wide variety of systems in domestic, automotive and industrial environments, and most examples have implemented and verified controls. The text is ideal for readers looking for an insight into how electric machines play an important role in most real-life applications of control. Practitioners and students preparing for a career in control design applied in electric machines will benefit from the book’s easily understood theoretical approach to complex machine control. The book contains mathematics appropriate to various levels of experience, from the student to the academic and the experienced professional. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book Supply of Single phase Power from Three phase Systems written by M. Walker and published by . This book was released on 1918 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unified Power Flow Controller Technology and Application written by Jijun Yin and published by Academic Press. This book was released on 2017-06-16 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unified Power Flow Controller Technology and Application provides comprehensive coverage on UPFC technology, providing a range of topics, including design principle, control and protection, and insulation coordination. It summarizes all the most up-to-date research and practical achievements that are related to UPFC and MMC technology, including test techniques for main components, closed-loop test techniques for control and protection systems, and onsite techniques for implementing UPFC projects. The book is an essential reference book for both academics and engineers working in power system protection control, power system planning engineers, and HVDC FACTS related areas. Readers will not only obtain the detailed information regarding theoretical analysis and practical application of UPFC, but also the control mechanism of advanced MMC technology, both of which are not common topics in previously published books. Shows how to use modular multilevel converters (MMC) to implement UPFC that lead to cost-effective and reliable systems Draws from the most up-to-date research and practical applications Teaches electromechanical/electromagnetic transient simulation techniques and real-time closed-loop simulation test techniques of the MMC based UPFC
Download or read book Theory and Calculation of Alternating Current Phenomena written by Charles Proteus Steinmetz and published by . This book was released on 1900 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Separations Using Aqueous Phase Systems written by D. Fisher and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of aqueous two-phase systems for the partitioning of macromolecules, organelles and cells was originally developed by Per-Ake Albertsson in Sweden in the mid-fifties [1-3]. These systems were initially applied to separations of plant organelles and viruses but their use has now extended into most areas of cell biology and biochemistry [4,5]. Since 1979 biennial International Conferences on Partitioning in Aqueous Two-Phase Systems have been held in Los Angeles (1979), Sheffield (1981), Vancouver (1983) and Lund (1985). The 5th conference was held in Oxford from 23-28 August 1987 and was entitled "Advances in Separations Using Aqueous Phase Systems in Cell Biology and Biotechnology". It is the formal presentations from this meeting which comprise this volume. In contrast to earlier books on phase partitioning [4,5] this volume contains, for the first time, worldwide contributions from over sixty partitioners from a variety of scientific disciplines, thereby providing a detailed overview of the widespread application and potential of bioseparations using phase partitioning. Disciplines include Biophysics, Biochemistry, Cell Biology, Microbiology, Biotechnology and Process Engineering, in both academic and commercial establishments. These biennial conferences allow advances in these diverse partitioning fields to be reviewed and compared; they also provide an opportunity for those considering using phase partitioning to obtain information, advice and contacts. Attendance has grown steadily over the years and 140 scientists came to Oxford. The conference consisted of ten symposia on areas of application of partitioning which have been organised as specific chapters in this volume.
