Download or read book Three Dimensional Modeling of Diesel Engine Intake Flow Combustion and Emissions written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-11-12 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: A three-dimensional computer code (KIVA) is being modified to include state-of-the-art submodels for diesel engine flow and combustion: spray atomization, drop breakup/coalescence, multi-component fuel vaporization, spray/wall interaction, ignition and combustion, wall heat transfer, unburned HC and NOx formation, soot and radiation, and the intake flow process. Improved and/or new submodels which were completed are: wall heat transfer with unsteadiness and compressibility, laminar-turbulent characteristic time combustion with unburned HC and Zeldo'vich NOx, and spray/wall impingement with rebounding and sliding drops. Results to date show that adding the effects of unsteadiness and compressibility improves the accuracy of heat transfer predictions; spray drop rebound can occur from walls at low impingement velocities (e.g., in cold-starting); larger spray drops are formed at the nozzle due to the influence of vaporization on the atomization process; a laminar-and-turbulent characteristic time combustion model has the flexibility to match measured engine combustion data over a wide range of operating conditions; and finally, the characteristic time combustion model can also be extended to allow predictions of ignition. The accuracy of the predictions is being assessed by comparisons with available measurements. Additional supporting experiments are also described briefly. To date, comparisons with measured engine cylinder pressure and heat flux data were made for homogeneous charge, spark-ignited and compression-ignited engines. The model results are in good agreement with the experiments. Reitz, R. D. and Rutland, C. J. Unspecified Center...
Download or read book Three Dimensional Modeling of Diesel Engine Intake Flow Combustion and Emissions written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-17 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: A three-dimensional computer code (KIVA) is being modified to include state-of-the-art submodels for diesel engine flow and combustion: spray atomization, drop breakup/coalescence, multi-component fuel vaporization, spray/wall interaction, ignition and combustion, wall heat transfer, unburned HC and NOx formation, soot and radiation, and the intake flow process. Improved and/or new submodels which were completed are: wall heat transfer with unsteadiness and compressibility, laminar-turbulent characteristic time combustion with unburned HC and Zeldo'vich NOx, and spray/wall impingement with rebounding and sliding drops. Results to date show that adding the effects of unsteadiness and compressibility improves the accuracy of heat transfer predictions; spray drop rebound can occur from walls at low impingement velocities (e.g., in cold-starting); larger spray drops are formed at the nozzle due to the influence of vaporization on the atomization process; a laminar-and-turbulent characteristic time combustion model has the flexibility to match measured engine combustion data over a wide range of operating conditions; and finally, the characteristic time combustion model can also be extended to allow predictions of ignition. The accuracy of the predictions is being assessed by comparisons with available measurements. Additional supporting experiments are also described briefly. To date, comparisons with measured engine cylinder pressure and heat flux data were made for homogeneous charge, spark-ignited and compression-ignited engines. The model results are in good agreement with the experiments. Reitz, R. D. and Rutland, C. J. Unspecified Center...
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Preprints of the Annual Automotive Technology Development Contractors Coordination Meeting written by and published by . This book was released on 1991 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1993 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book La Mod lisation multidimensionnelle des coulements dans les moteurs written by Thierry Baritaud and published by Editions TECHNIP. This book was released on 1999 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an increasingly challenging commercial environment, and the need imposed by safety principles to reduce both fuel consumption and pollutant emissions, the development of new engines can now benefit from the advances of computational fluid dynamics. Engine CFD is a most challenging simulation problem. This is caused by the spread of time and space scales, the excursion amplitude of most parameters, the high quasi-cyclic unstationarity of engine flows, the importance of minor geometry details, the number of physical and chemical processes including turbulent combustion and multi-phase flows to model. However, engine CFD has now reached a state where it has become a widely used tool, not only for engine understanding, but also increasingly for engine design. Undoubtedly, laser diagnostics in optical access engines have also brought significant help.Contents: 1. State of the art of multi-dimensional modeling of engine reacting flows. 2. Simulation of the intake and compression strokes of a motored 4-valve SI engine with a finite element code. 3. A parallel, unstructured-mesh methodology for device-scale combustion calculations. 4. Large-eddy simulation of in-cylinder flows. 5. Simulation of engine internal flows using digital physics. 6. Automatic block decomposition of parametrically changing volumes. 7. Developments in spray modeling in diesel and direct-injection gasoline engines. 8. Cyto-fluid dynamic theory of atomization processes. 9. Influence of the wall temperature on the mixture preparation in DI gasoline engines. 10. Simulation of cavitating flows in diesel injectors. 11. Recent developments in simulations of internal flows in high pressure swirl injectors. 12. 3D simulation of DI diesel combustion and pollutant formation using a two-component reference fuel. 13. Modeling of NOx and soot formation in diesel combustion. 14. Multi-dimensional modeling of combustion and pollutants formation of new technology light duty diesel engines. 15. 3D modeling of combustion for DI-SI engines. 16. Combustion modeling with the G-equation. 17. Multi-dimensional modeling of the aerodynamic and combustion in diesel engines. 18. CFD aided development of a SI-DI engine. 19. CFD engine applications at FIAT research centre. 20. Application of a detailed emission model for heavy duty diesel engine simulations. 21. CFD based shape optimization of IC engine.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Turbulence Modelling and Experiments 2 written by F. Martelli and published by Elsevier. This book was released on 2014-06-28 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today understanding turbulence is one of the key issues in tackling flow problems in engineering. Powerful computers and numerical methods are now available for solving flow equations, but the simulation of turbulence effects, which are nearly always important in practice, are still at an early stage of development. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulence momentum, heat and mass transfer. The 89 papers, including 5 invited papers, in this volume present and discuss new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The high standard of the contributions on the developing and testing of turbulent models attests to the world-wide interest this domain is currently attracting from researchers.
Download or read book Proceedings of the 1998 Spring Technical Conference of the ASME Internal Combustion Engine Division Advances in engine processes combustion and fuels written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Spring Technical Conference and published by . This book was released on 1998 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical and Electronics Engineering III written by Han Zhao and published by Trans Tech Publications Ltd. This book was released on 2011-10-27 with total page 4388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2011 3rd International Conference on Mechanical and Electronics Engineering (ICMEE 2011), September 23-25, 2011, Hefei, China
Download or read book Aeronautical Engineering written by and published by . This book was released on 1993 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system and announced in Scientific and technical aerospace reports (STAR) and International aerospace abstracts (IAA)
Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1983 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 1998 Fall Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Technical Conference and published by . This book was released on 1998 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diesel Engine Modeling written by Society of Automotive Engineers and published by SAE International. This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Index abstracts of Sae Technical Papers 2000 written by Society Of Automotive Engineers and published by . This book was released on 2001 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:
