Download or read book Three dimensional Interactions and Vortical Flows with Emphasis on High Speeds written by David J. Peake and published by . This book was released on 1980 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vortex Flows at Supersonic Speeds written by Richard M. Wood and published by . This book was released on 2003 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Three Dimensional Attached Viscous Flow written by Ernst Heinrich Hirschel and published by Springer Science & Business Media. This book was released on 2013-10-29 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscous flow is treated usually in the frame of boundary-layer theory and as two-dimensional flow. Books on boundary layers give at most the describing equations for three-dimensional boundary layers, and solutions often only for some special cases. This book provides basic principles and theoretical foundations regarding three-dimensional attached viscous flow. Emphasis is put on general three-dimensional attached viscous flows and not on three-dimensional boundary layers. This wider scope is necessary in view of the theoretical and practical problems to be mastered in practice. The topics are weak, strong, and global interaction, the locality principle, properties of three-dimensional viscous flow, thermal surface effects, characteristic properties, wall compatibility conditions, connections between inviscid and viscous flow, flow topology, quasi-one- and two-dimensional flows, laminar-turbulent transition and turbulence. Though the primary flight speed range is that of civil air transport vehicles, flows past other flying vehicles up to hypersonic speeds are also considered. Emphasis is put on general three-dimensional attached viscous flows and not on three-dimensional boundary layers, as this wider scope is necessary in view of the theoretical and practical problems that have to be overcome in practice. The specific topics covered include weak, strong, and global interaction; the locality principle; properties of three-dimensional viscous flows; thermal surface effects; characteristic properties; wall compatibility conditions; connections between inviscid and viscous flows; flow topology; quasi-one- and two-dimensional flows; laminar-turbulent transition; and turbulence. Detailed discussions of examples illustrate these topics and the relevant phenomena encountered in three-dimensional viscous flows. The full governing equations, reference-temperature relations for qualitative considerations and estimations of flow properties, and coordinates for fuselages and wings are also provided. Sample problems with solutions allow readers to test their understanding.

Download or read book Separated and Vortical Flow in Aircraft Wing Aerodynamics written by Ernst Heinrich Hirschel and published by Springer Nature. This book was released on 2020-10-04 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid mechanical aspects of separated and vortical flow in aircraft wing aerodynamics are treated. The focus is on two wing classes: (1) large aspect-ratio wings and (2) small aspect-ratio delta-type wings. Aerodynamic design issues in general are not dealt with. Discrete numerical simulation methods play a progressively larger role in aircraft design and development. Accordingly, in the introduction to the book the different mathematical models are considered, which underlie the aerodynamic computation methods (panel methods, RANS and scale-resolving methods). Special methods are the Euler methods, which as rather inexpensive methods embrace compressibility effects and also permit to describe lifting-wing flow. The concept of the kinematically active and inactive vorticity content of shear layers gives insight into many flow phenomena, but also, with the second break of symmetry---the first one is due to the Kutta condition---an explanation of lifting-wing flow fields. The prerequisite is an extended definition of separation: “flow-off separation” at sharp trailing edges of class (1) wings and at sharp leading edges of class (2) wings. The vorticity-content concept, with a compatibility condition for flow-off separation at sharp edges, permits to understand the properties of the evolving trailing vortex layer and the resulting pair of trailing vortices of class (1) wings. The concept also shows that Euler methods at sharp delta or strake leading edges of class (2) wings can give reliable results. Three main topics are treated: 1) Basic Principles are considered first: boundary-layer flow, vortex theory, the vorticity content of shear layers, Euler solutions for lifting wings, the Kutta condition in reality and the topology of skin-friction and velocity fields. 2) Unit Problems treat isolated flow phenomena of the two wing classes. Capabilities of panel and Euler methods are investigated. One Unit Problem is the flow past the wing of the NASA Common Research Model. Other Unit Problems concern the lee-side vortex system appearing at the Vortex-Flow Experiment 1 and 2 sharp- and blunt-edged delta configurations, at a delta wing with partly round leading edges, and also at the Blunt Delta Wing at hypersonic speed. 3) Selected Flow Problems of the two wing classes. In short sections practical design problems are discussed. The treatment of flow past fuselages, although desirable, was not possible in the frame of this book.

Download or read book Three dimensional Separated Flow Topology written by Jean Délery and published by John Wiley & Sons. This book was released on 2013-02-28 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops concepts and a methodology for a rational description of the organization of three-dimensional flows considering, in particular, the case where the flow is the place of separations. The descriptive analysis based on the critical point theory of Poincaré develops conventional but rather unfamiliar considerations from aerodynamicists, who face the understanding of complex flows including multiple separation lines and vortices. These problems concern industrial sectors where aerodynamics plays a key role, such as aerospace, ground vehicles, buildings, etc. Contents 1. Skin Friction Lines Pattern and Critical Points. 2. Separation Streamsurfaces and Vortex Structures. 3. Separated Flow on a Body. 4. Vortex Wake of Wings and Slender Bodies. 5. Separation Induced by an Obstacle or a Blunt Body. 6. Reconsideration of the Two-Dimensional Separation. 7. Concluding Remarks. About the Authors Jean Délery is a Supaero (French National Higher School of Aeronautics and Space) engineer who has worked at Onera (French national aerospace research center) since 1964. He has participated in several major French and European aerospace programs, is the author of many scientific publications, and has occupied various teaching positions particularly at Supaero, the University of Versailles-Saint-Quentin, Ecole polytechnique in France and “La Sapienza” University in Rome, Italy. He is currently emeritus adviser at Onera.

Download or read book Studies of Vortex Dominated Flows written by M.Y. Hussaini and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the astrophysical scale of a swirling spiral galaxy, through the geophysical scale of a hurricane, down to the subatomic scale of elementary particles, vortical motion and vortex dynamics have played a profound role in our understanding of the physical world. Kuchemann referred to vortex dynamics as "the sinews and muscles of fluid motion. " In order to update our understanding of vortex dominated flows, NASA Langley Research Center and the Institute for Computer Applications in Science and Engineering (ICASE) conducted a workshop during July 9-11, 1985. The subject was broadly divided into five overlapping topics vortex dynamics, vortex breakdown, massive separation, vortex shedding from sharp leading edges and conically separated flows. Some of the experts in each of these areas were invited to provide an overview of the subject. This volume is the proceedings of the workshop and contains the latest, theoretical, numerical, and experimental work in the above-mentioned areas. Leibovich, Widnall, Moore and Sirovich discussed topics on the fundamentals of vortex dynamics, while Keller and Hafez treated the problem of vortex break down phenomena; the contributions of Smith, Davis and LeBalleur were in the area of massive separation and inviscid-viscous interactions, while those of Cheng, Hoeijmakers and Munnan dealt with sharp-leading-edge vortex flows; and Fiddes and Marconi represented the category of conical separated flows.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physics of Separated Flows Numerical Experimental and Theoretical Aspects written by Klaus Gersten and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 37 contributions in which the research work is summarized which has been carried out between 1984 and 1990 in the Priority Research Program "Physik abgeloster Stromungen" of the Deutsche Forschungsgemeinschaft (DFG, German Research Society). The aim of the Priority Research Program was the inten sive research of the whole range of phenomena associated with separated flows. Physi cal models as well as prediction methods had to be developed based on detailed experi mental investigations. It was in accordance with the main concept of the research program that scientists working on problems of separated flows in different technical areas of application participated in this program. The following fields have been represented in the program: aerodynamics of wings and bodies, aerodynamics of auto mobiles, turbomachinery, ship hydrodynamics, hydraulics, internal flows, heat exchan gers, bio-fluid-dynamics, aerodynamics of buildings and structures. In order to concentrate on problems common in all those areas the emphasis of the program was on basic research dealing with generic geometric configurations showing the fundamental physical phenomena of separated flows. The engagement and enthusiasm of all participating scientists are highly appreciated. The program was organized such that all researchers met once a year to report on the progress of their work. Special thanks ought to go to Prof. E. A. Muller (Gottingen), Prof. H. Oertel jun. (Braunschweig), Dr. W. Schmidt (Dornier), Dr. H. -W. Stock (Dornier) and Dr. B. Wagner (Dornier), who had the functions of referees on those annual meetings.

Download or read book High Angle of Attack Aerodynamics written by Josef Rom and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aerodynamics of aircraft at high angles of attack is a subject which is being pursued diligently, because the modern agile fighter aircraft and many of the current generation of missiles must perform well at very high incidence, near and beyond stall. However, a comprehensive presentation of the methods and results applicable to the studies of the complex aerodynamics at high angle of attack has not been covered in monographs or textbooks. This book is not the usual textbook in that it goes beyond just presenting the basic theoretical and experimental know-how, since it contains reference material to practical calculation methods and technical and experimental results which can be useful to the practicing aerospace engineers and scientists. It can certainly be used as a text and reference book for graduate courses on subjects related to high angles of attack aerodynamics and for topics related to three-dimensional separation in viscous flow courses. In addition, the book is addressed to the aerodynamicist interested in a comprehensive reference to methods of analysis and computations of high angle of attack flow phenomena and is written for the aerospace scientist and engineer who is familiar with the basic concepts of viscous and inviscid flows and with computational methods used in fluid dynamics.

Download or read book New Results in Numerical and Experimental Fluid Mechanics written by Horst Körner and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers of the 10th AG STAB (German Aerospace Aerodynamics Association). In this association all those scientists and engineers from universities, research-establishments and industry are involved, who are doing research and project work in numerical and experimental fluid mechanics and aerodynamics for aerospace and other applications. Many of the contributions are giving first results from the "Luftfahrtforschungsprogramm der Bundesregierung (German Aeronautical Research Program) 1995-1998". Some of the papers report on work sponsored by the Deutsche Forschungsgemeinschaft, DFG, which also was presented at the symposium. The volume gives a broad overview over the ongoing work in this field in Germany.

Download or read book Flow visualization and interpretation of visualization data for deflected thrust V STOL nozzles written by Hsiao C. Kao and published by . This book was released on 1984 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Understanding Aerodynamics written by Doug McLean and published by John Wiley & Sons. This book was released on 2012-12-26 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much-needed, fresh approach that brings a greater insight into the physical understanding of aerodynamics Based on the author’s decades of industrial experience with Boeing, this book helps students and practicing engineers to gain a greater physical understanding of aerodynamics. Relying on clear physical arguments and examples, Mclean provides a much-needed, fresh approach to this sometimes contentious subject without shying away from addressing "real" aerodynamic situations as opposed to the oversimplified ones frequently used for mathematical convenience. Motivated by the belief that engineering practice is enhanced in the long run by a robust understanding of the basics as well as real cause-and-effect relationships that lie behind the theory, he provides intuitive physical interpretations and explanations, debunking commonly-held misconceptions and misinterpretations, and building upon the contrasts provided by wrong explanations to strengthen understanding of the right ones. Provides a refreshing view of aerodynamics that is based on the author’s decades of industrial experience yet is always tied to basic fundamentals. Provides intuitive physical interpretations and explanations, debunking commonly-held misconceptions and misinterpretations Offers new insights to some familiar topics, for example, what the Biot-Savart law really means and why it causes so much confusion, what “Reynolds number” and “incompressible flow” really mean, and a real physical explanation for how an airfoil produces lift. Addresses "real" aerodynamic situations as opposed to the oversimplified ones frequently used for mathematical convenience, and omits mathematical details whenever the physical understanding can be conveyed without them.

Download or read book Modeling Complex Turbulent Flows written by Manuel D. Salas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence modeling both addresses a fundamental problem in physics, 'the last great unsolved problem of classical physics,' and has far-reaching importance in the solution of difficult practical problems from aeronautical engineering to dynamic meteorology. However, the growth of supercom puter facilities has recently caused an apparent shift in the focus of tur bulence research from modeling to direct numerical simulation (DNS) and large eddy simulation (LES). This shift in emphasis comes at a time when claims are being made in the world around us that scientific analysis itself will shortly be transformed or replaced by a more powerful 'paradigm' based on massive computations and sophisticated visualization. Although this viewpoint has not lacked ar ticulate and influential advocates, these claims can at best only be judged premature. After all, as one computational researcher lamented, 'the com puter only does what I tell it to do, and not what I want it to do. ' In turbulence research, the initial speculation that computational meth ods would replace not only model-based computations but even experimen tal measurements, have not come close to fulfillment. It is becoming clear that computational methods and model development are equal partners in turbulence research: DNS and LES remain valuable tools for suggesting and validating models, while turbulence models continue to be the preferred tool for practical computations. We believed that a symposium which would reaffirm the practical and scientific importance of turbulence modeling was both necessary and timely.

Download or read book Aeronautical Engineering written by and published by . This book was released on 1991 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbulent Shear Layers in Supersonic Flow written by Alexander J. Smits and published by Springer Science & Business Media. This book was released on 2006-05-11 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: A good understanding of turbulent compressible flows is essential to the design and operation of high-speed vehicles. Such flows occur, for example, in the external flow over the surfaces of supersonic aircraft, and in the internal flow through the engines. Our ability to predict the aerodynamic lift, drag, propulsion and maneuverability of high-speed vehicles is crucially dependent on our knowledge of turbulent shear layers, and our understanding of their behavior in the presence of shock waves and regions of changing pressure. Turbulent Shear Layers in Supersonic Flow provides a comprehensive introduction to the field, and helps provide a basis for future work in this area. Wherever possible we use the available experimental work, and the results from numerical simulations to illustrate and develop a physical understanding of turbulent compressible flows.

Download or read book Numerical Solutions of the Euler Equations for Steady Flow Problems written by Albrecht Eberle and published by Vieweg+Teubner Verlag. This book was released on 2013-04-17 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last decade has seen a dramatic increase of our abilities to solve numerically the governing equations of fluid mechanics. In design aerodynamics the classical potential-flow methods have been complemented by higher modelling-level methods. Euler solvers, and for special purposes, already Navier-Stokes solvers are in use. The authors of this book have been working on the solution of the Euler equations for quite some time. While the first two of us have worked mainly on algorithmic problems, the third has been concerned off and on with modelling and application problems of Euler methods. When we started to write this book we decided to put our own work at the center of it. This was done because we thought, and we leave this to the reader to decide, that our work has attained over the years enough substance in order to justify a book. The problem which we soon faced, was that the field still is moving at a fast pace, for instance because hyper sonic computation problems became more and more important.

Download or read book A Collection of Technical Papers written by and published by . This book was released on 1984 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: