Download or read book Three Dimensional Flow in the Root Region of Wind Turbine Rotors written by Galih Bangga and published by kassel university press GmbH. This book was released on 2018-06-20 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art in the analyses of three-dimensional flow over rotating wind turbine blades. Systematic studies for wind turbine rotors with different sizes were carried out numerically employing three different simulation approaches, namely the Euler, URANS and DDES methods. The main mechanisms of the lift augmentation in the blade inboard region are described in detail. The physical relations between the inviscid and viscous effects are presented and evaluated, emphasizing the influence of the flow curvature on the resulting pressure distributions. Detailed studies concerning the lift augmentation for large wind turbine rotors are considered as thick inboard airfoils characterized by massive separation are desired to stronger contribute to power production. Special attention is given to the analyses of wind turbine loads and flow field that can be helpful for the interpretation of the occurring physical phenomena. The book is aimed at students, researchers, engineers and physicists dealing with wind engineering problems, but also for a wider audience involved in flow computations.
Download or read book The Three Dimensional Flow Field at the Exit of an Axial Flow Turbine Rotor written by B. Lakshminarayana and published by . This book was released on 1998 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Three Dimensional Flow Field Measurements in a Transonic Turbine Cascade written by P. W. Geil and published by . This book was released on 1996 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at the International Gas Turbine and Aeroengine Congress & Exhibition Birmingham, UK - June 10-13, 1996.
Download or read book Analytical Investigation of Some Three dimensional Flow Problems in Turbomachines written by Frank E. Marble and published by . This book was released on 1952 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The flow of an incompressible inviscid fluid through a turbomachine with blade rows consisting of an infinite number of similar infinitely thin blades has been investigated theoretically in order to examine and describe the three-dimensional flow phenomena and to illustrate the methods of calculation developed.
Download or read book Fluid Mechanics and Thermodynamics of Turbomachinery written by Sydney Lawrence Dixon and published by Elsevier. This book was released on 1998 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the intervening 20 years since the 3rd edition of this textbook many advances have been made in the design of turbines and greater understanding of the processes involved have been gained. This 4th edition brings the book up to date.
Download or read book Turbomachinery Fluid Dynamics and Heat Transfer written by Hah and published by Routledge. This book was released on 2017-10-02 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This festschrift in honor of Professor Budugur Lakshminarayana's 60th birthday-based on the proceedings of a symposium on Turbomachinery Fluid Dynamics and Heat Transfer held recently at The Pennsylvania State University, University Park-provides authoritative and conclusive research results as well as new insights into complex flow features found in the turbomachinery used for propulsion, power, and industrial applications. Explaining in detail compressors, heat transfer fields in turbines, computational fluid dynamics, and unsteady flows, Turbomachinery Fluid Dynamics and Heat Transfer covers: Mixing mechanisms, annulus wall boundary layers, and the flow field in transonic turbocompressors The numerical implementation of turbulence models in a computer code Secondary flows, film cooling, and thermal turbulence modeling The visualization method of modeling using liquid crystals Innovative techniques in the computational modeling of compressor and turbine flows measurement in unsteady flows as well as axial flows and compressor noise generation And much more Generously illustrated and containing key bibliographic citations, Turbomachinery Fluid Dynamics and Heat Transfer is an indispensable resource for mechanical, design, aerospace, marine, manufacturing, materials, industrial, and reliability engineers; and upper-level undergraduate and graduate students in these disciplines.
Download or read book Axial Turbine Aerodynamics for Aero engines written by Zhengping Zou and published by Springer. This book was released on 2018-01-11 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a monograph on aerodynamics of aero-engine gas turbines focusing on the new progresses on flow mechanism and design methods in the recent 20 years. Starting with basic principles in aerodynamics and thermodynamics, this book systematically expounds the recent research on mechanisms of flows in axial gas turbines, including high pressure and low pressure turbines, inter-turbine ducts and turbine rear frame ducts, and introduces the classical and innovative numerical evaluation methods in different dimensions. This book also summarizes the latest research achievements in the field of gas turbine aerodynamic design and flow control, and the multidisciplinary conjugate problems involved with gas turbines. This book should be helpful for scientific and technical staffs, college teachers, graduate students, and senior college students, who are involved in research and design of gas turbines.
Download or read book Turbine Aerodynamics written by Ronald H. Aungier and published by American Society of Mechanical Engineers. This book was released on 2006 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough description of actual, working aerodynamic design and analysis systems, for both axial-flow and radial-flow turbines. It describes the basic fluid dynamic and thermodynamic principles, empirical models and numerical methods used for the full range of procedures and analytical tools that an engineer needs for virtually any type of aerodynamic design or analysis activity for both types of turbine. The book includes sufficient detail for readers to implement all or part of the systems. The author provides practical and effective design strategies for applying both turbine types, which are illustrated by design examples. Comparisons with experimental results are included to demonstrate the prediction accuracy to be expected. This book is intended for practicing engineers concerned with the design and development of turbines and related machinery.
Download or read book Three Dimensional Flow Phenomena in Fluid Machinery written by American Society of Mechanical Engineers. Winter Annual Meeting and published by . This book was released on 1985 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Design of High Efficiency Turbomachinery and Gas Turbines second edition with a new preface written by David Gordon Wilson and published by MIT Press. This book was released on 2014-09-12 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a comprehensive textbook that introduces turbomachinery and gas turbines through design methods and examples. This comprehensive textbook is unique in its design-focused approach to turbomachinery and gas turbines. It offers students and practicing engineers methods for configuring these machines to perform with the highest possible efficiency. Examples and problems are based on the actual design of turbomachinery and turbines. After an introductory chapter that outlines the goals of the book and provides definitions of terms and parts, the book offers a brief review of the basic principles of thermodynamics and efficiency definitions. The rest of the book is devoted to the analysis and design of real turbomachinery configurations and gas turbines, based on a consistent application of thermodynamic theory and a more empirical treatment of fluid dynamics that relies on the extensive use of design charts. Topics include turbine power cycles, diffusion and diffusers, the analysis and design of three-dimensional free-stream flow, and combustion systems and combustion calculations. The second edition updates every chapter, adding material on subjects that include flow correlations, energy transfer in turbomachines, and three-dimensional design. A solutions manual is available for instructors. This new MIT Press edition makes a popular text available again, with corrections and some updates, to a wide audience of students, professors, and professionals.
Download or read book Turbomachinery Performance Analysis written by R. I. Lewis and published by Butterworth-Heinemann. This book was released on 1996-05-31 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This modern overview to performance analysis places aero- and fluid-dynamic treatments, such as cascade and meridional flow analyses, within the broader context of turbomachine performance analysis. For the first time ducted propellers are treated formally within the general family of turbomachines. It also presents a new approach to the use of dimensional analysis which links the overall requirements, such as flow and head, through velocity triangles to blade element loading and related fluid dynamics within a unifying framework linking all aspects of performance analysis for a wide range of turbomachine types. Computer methods are introduced in the main text and a key chapter on axial turbine performance analysis is complemented by the inclusion of 3 major computer programs on an accompanying disc. These enable the user to generate and modify design data through a graphic interface to assess visually the impact on predicted performance and are designed as a Computer Aided Learning Suite for student project work at the professional designer level.Based on the author's many years of teaching at degree level and extensive research experience, this book is a must for all students and professional engineers involved with turbomachinery.
Download or read book Computational Fluid Dynamics Techniques written by Fathi Habashi and published by CRC Press. This book was released on 1995-11-22 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1995. Routledge is an imprint of Taylor & Francis, an informa company.
Download or read book Principles of Turbomachinery written by Seppo A. Korpela and published by John Wiley & Sons. This book was released on 2019-05-29 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: A newly updated and expanded edition that combines theory and applications of turbomachinery while covering several different types of turbomachinery In mechanical engineering, turbomachinery describes machines that transfer energy between a rotor and a fluid, including turbines, compressors, and pumps. Aiming for a unified treatment of the subject matter, with consistent notation and concepts, this new edition of a highly popular book provides all new information on turbomachinery, and includes 50% more exercises than the previous edition. It allows readers to easily move from a study of the most successful textbooks on thermodynamics and fluid dynamics to the subject of turbomachinery. The book also builds concepts systematically as progress is made through each chapter so that the user can progress at their own pace. Principles of Turbomachinery, 2nd Edition provides comprehensive coverage of everything readers need to know, including chapters on: thermodynamics, compressible flow, and principles of turbomachinery analysis. The book also looks at steam turbines, axial turbines, axial compressors, centrifugal compressors and pumps, radial inflow turbines, hydraulic turbines, hydraulic transmission of power, and wind turbines. New chapters on droplet laden flows of steam and oblique shocks help make this an incredibly current and well-rounded resource for students and practicing engineers. Includes 50% more exercises than the previous edition Uses MATLAB or GNU/OCTAVE for all the examples and exercises for which computer calculations are needed, including those for steam Allows for a smooth transition from the study of thermodynamics, fluid dynamics, and heat transfer to the subject of turbomachinery for students and professionals Organizes content so that more difficult material is left to the later sections of each chapter, allowing instructors to customize and tailor their courses for their students Principles of Turbomachinery is an excellent book for students and professionals in mechanical, chemical, and aeronautical engineering.
Download or read book Aeronautical Engineering written by and published by . This book was released on 1971 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system and announced in Scientific and technical aerospace reports (STAR) and International aerospace abstracts (IAA)
Download or read book Fluid Mechanics and Thermodynamics of Turbomachinery written by S. Larry Dixon and published by Elsevier. This book was released on 2005-03-30 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition will continue to be of use to engineers in industry and technological establishments, especially as brief reviews are included on many important aspects of Turbomachinery, giving pointers towards more advanced sources of information. For readers looking towards the wider reaches of the subject area, very useful additional reading is referenced in the bibliography. The subject of Turbomachinery is in continual review, and while the basics do not change, research can lead to refinements in popular methods, and new data can emerge. This book has applications for professionals and students in many subsets of the mechanical engineering discipline, with carryover into thermal sciences; which include fluid mechanics, combustion and heat transfer; dynamics and vibrations, as well as structural mechanics and materials engineering. - An important, long overdue new chapter on Wind Turbines, with a focus on blade aerodynamics, with useful worked examples - Includes important material on axial flow compressors and pumps - Example questions and answers throughout
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1969 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerothermodynamics of Aircraft Engine Components written by Gordon C. Oates and published by AIAA. This book was released on 1985 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Design and R & D engineers and students will value the comprehensive, meticulous coverage in this volume. Beginning with the basic principles and concepts of aeropropulsion combustion, chapters explore specific processes, limitations, and analytical methods as they bear on component design.
