Download or read book 3D Discrete Element Workbench for Highly Dynamic Thermo mechanical Analysis written by Damien Andre and published by John Wiley & Sons. This book was released on 2015-10-26 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex behavior models (plasticity, cracks, visco elascticity) face some theoretical difficulties for the determination of the behavior law at the continuous scale. When homogenization fails to give the right behavior law, a solution is to simulate the material at a meso scale in order to simulate directly a set of discrete properties that are responsible of the macroscopic behavior. The discrete element model has been developed for granular material. The proposed set shows how this method is capable to solve the problem of complex behavior that are linked to discrete meso scale effects. The first book solves the local problem, the second one presents a coupling approach to link the structural effects to the local ones, this third book presents the software workbench that includes all the theoretical developments.

Download or read book The Finite Element Method for Three Dimensional Thermomechanical Applications written by Guido Dhondt and published by John Wiley & Sons. This book was released on 2004-11-19 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Though many 'finite element' books exist, this book provides a unique focus on developing the method for three-dimensional, industrial problems. This is significant as many methods which work well for small applications fail for large scale problems, which generally: are not so well posed introduce stringent computer time conditions require robust solution techniques. Starting from sound continuum mechanics principles, derivation in this book focuses only on proven methods. Coverage of all different aspects of linear and nonlinear thermal mechanical problems in solids are described, thereby avoiding distracting the reader with extraneous solutions paths. Emphasis is put on consistent representation and includes the examination of topics which are not frequently found in other texts, such as cyclic symmetry, rigid body motion and nonlinear multiple point constraints. Advanced material formulations include anisotropic hyperelasticity, large strain multiplicative viscoplasticity and single crystal viscoplasticity. Finally, the methods described in the book are implemented in the finite element software CalculiX, which is freely available (www.calculix.de; the GNU General Public License applies). Suited to industry practitioners and academic researchers alike, The Finite Element Method for Three-Dimensional Thermomechanical Applications expertly bridges the gap between continuum mechanics and the finite element method.

Download or read book Geometric and Topological Mesh Feature Extraction for 3D Shape Analysis written by Jean-Luc Mari and published by John Wiley & Sons. This book was released on 2020-01-02 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-dimensional surface meshes are the most common discrete representation of the exterior of a virtual shape. Extracting relevant geometric or topological features from them can simplify the way objects are looked at, help with their recognition, and facilitate description and categorization according to specific criteria. This book adopts the point of view of discrete mathematics, the aim of which is to propose discrete counterparts to concepts mathematically defined in continuous terms. It explains how standard geometric and topological notions of surfaces can be calculated and computed on a 3D surface mesh, as well as their use for shape analysis. Several applications are also detailed, demonstrating that each of them requires specific adjustments to fit with generic approaches. The book is intended not only for students, researchers and engineers in computer science and shape analysis, but also numerical geologists, anthropologists, biologists and other scientists looking for practical solutions to their shape analysis, understanding or recognition problems.

Download or read book Finite Element Method to Model Electromagnetic Systems in Low Frequency written by Francis Piriou and published by John Wiley & Sons. This book was released on 2024-02-23 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical modeling now plays a central role in the design and study of electromagnetic systems. In the field of devices operating in low frequency, it is the finite element method that has come to the fore in recent decades. Today, it is widely used by engineers and researchers in industry, as well as in research centers. This book describes in detail all the steps required to discretize Maxwell’s equations using the finite element method. This involves progressing from the basic equations in the continuous domain to equations in the discrete domain that are solved by a computer. This approach is carried out with a constant focus on maintaining a link between physics, i.e. the properties of electromagnetic fields, and numerical analysis. Numerous academic examples, which are used throughout the various stages of model construction, help to clarify the developments.

Download or read book Mesh Adaptation for Computational Fluid Dynamics Volume 1 written by Alain Dervieux and published by John Wiley & Sons. This book was released on 2022-09-21 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation technology, and computational fluid dynamics (CFD) in particular, is essential in the search for solutions to the modern challenges faced by humanity. Revolutions in CFD over the last decade include the use of unstructured meshes, permitting the modeling of any 3D geometry. New frontiers point to mesh adaptation, allowing not only seamless meshing (for the engineer) but also simulation certification for safer products and risk prediction. Mesh Adaptation for Computational Dynamics 1 is the first of two volumes and introduces basic methods such as feature-based and multiscale adaptation for steady models. Also covered is the continuous Riemannian metrics formulation which models the optimally adapted mesh problem into a pure partial differential statement. A number of mesh adaptative methods are defined based on a particular feature of the simulation solution. This book will be useful to anybody interested in mesh adaptation pertaining to CFD, especially researchers, teachers and students.

Download or read book Mesh Adaptation for Computational Fluid Dynamics Volume 2 written by Alain Dervieux and published by John Wiley & Sons. This book was released on 2022-09-21 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation technology, and computational fluid dynamics (CFD) in particular, is essential in the search for solutions to the modern challenges faced by humanity. Revolutions in CFD over the last decade include the use of unstructured meshes, permitting the modeling of any 3D geometry. New frontiers point to mesh adaptation, allowing not only seamless meshing (for the engineer) but also simulation certification for safer products and risk prediction. Mesh Adaptation for Computational Dynamics 2 is the second of two volumes and introduces topics including optimal control formulation, minimizing a goal function, and extending the steady algorithm to unsteady physics. Also covered are multi-rate strategies, steady inviscid flows in aeronautics and an extension to viscous flows. This book will be useful to anybody interested in mesh adaptation pertaining to CFD, especially researchers, teachers and students.

Download or read book Meshing Geometric Modeling and Numerical Simulation 3 written by Paul Louis George and published by John Wiley & Sons. This book was released on 2020-11-04 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Triangulations, and more precisely meshes, are at the heart of many problems relating to a wide variety of scientific disciplines, and in particular numerical simulations of all kinds of physical phenomena. In Volume 1, the theoretical foundations relating to triangulations, finite element shape functions and their interpretations as geometric patches were explored. This has made it possible to build tools that make the geometric modeling of any object possible. These elements are used in Volume 2 to treat meshing problems in their different implementations. Meshing, Geometric Modeling and Numerical Simulation 3 offers technical additions to the methods seen in the first two volumes and a significant portion of this book is dedicated to mesh visualization problems and solutions, especially those with a high degree of complexity.

Download or read book The Finite Element Method written by Patrick Ciarlet and published by John Wiley & Sons. This book was released on 2023-07-26 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The finite element method, which emerged in the 1950s to deal with structural mechanics problems, has since undergone continuous development. Using partial differential equation models, it is now present in such fields of application as mechanics, physics, chemistry, economics, finance and biology. It is also used in most scientific computing software, and many engineers become adept at using it in their modeling and numerical simulation activities. This book presents all the essential elements of the finite element method in a progressive and didactic way: the theoretical foundations, practical considerations of implementation, algorithms, as well as numerical illustrations created in MATLAB. Original exercises with detailed answers are provided at the end of each chapter.

Download or read book Numerical Simulation An Art of Prediction 1 written by Jean-François Sigrist and published by John Wiley & Sons. This book was released on 2020-04-14 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation is a technique of major importance in various technical and scientific fields. Used to understand diverse physical phenomena or to design everyday objects, it plays a major role in innovation in the industrial sector. Whilst engineering curricula now include training courses dedicated to it, numerical simulation is still not well-known in some economic sectors, and even less so among the general public. Simulation involves the mathematical modeling of the real world, coupled with the computing power offered by modern technology. Designed to perform virtual experiments, digital simulation can be considered as an "art of prediction". Embellished with a rich iconography and based on the testimony of researchers and engineers, this book shines a light on this little-known art. It is the first of two volumes and focuses on the principles, methods and industrial practice of numerical modeling.

Download or read book Topology Optimization Design of Heterogeneous Materials and Structures written by Daicong Da and published by John Wiley & Sons. This book was released on 2020-02-26 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book pursues optimal design from the perspective of mechanical properties and resistance to failure caused by cracks and fatigue. The book abandons the scale separation hypothesis and takes up phase-field modeling, which is at the cutting edge of research and is of high industrial and practical relevance. Part 1 starts by testing the limits of the homogenization-based approach when the size of the representative volume element is non-negligible compared to the structure. The book then introduces a non-local homogenization scheme to take into account the strain gradient effects. Using a phase field method, Part 2 offers three significant contributions concerning optimal placement of the inclusion phases. Respectively, these contributions take into account fractures in quasi-brittle materials, interface cracks and periodic composites. The topology optimization proposed has significantly increased the fracture resistance of the composites studied.

Download or read book IGA Non invasive Coupling with FEM and Regularization of Digital Image Correlation Problems Volume 2 written by Robin Bouclier and published by John Wiley & Sons. This book was released on 2023-08-29 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Isogeometric analysis (IGA) consists of using the same higher-order and smooth spline functions for the representation of geometry in Computer Aided Design as for the approximation of solution fields in Finite Element Analysis. Now, almost twenty years after its creation, substantial works are being reported in IGA, making it very competitive in scientific computing. This book proposes to use IGA jointly with standard finite element methods (FEM), presenting IGA as a projection of FEM on a more regular reduced basis. By shedding new light on how IGA relates to FEM, we can see how IGA can be implemented on top of an FE code in order to improve the solution of problems that require more regularity. This is illustrated by using IGA with FEM in a non-invasive fashion to perform efficient and robust multiscale global/local simulations in solid mechanics. Furthermore, we show that IGA can regularize the inverse problem of FE digital image correlation in experimental mechanics.

Download or read book The Academic Discourse of Mechanical Engineering written by Thi Ngoc Phuong Le and published by John Benjamins Publishing Company. This book was released on 2023-03-15 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume examines rhetorical conventions employed in mechanical engineering research to understand the knowledge-making principles of the discipline, as well as their expression within the research article. In particular, the study analyses the organisational patterns of mechanical engineering research articles using Swales’s conceptualisation of moves and steps. In addition, the research identifies the phraseology associated with specific moves and steps. The study draws on a corpus of 120 mechanical engineering research articles, equally distributed across two sub-disciplines (mechanical systems and thermal-fluids engineering), three research traditions (experimental, theoretical and mixed methods), and two publication periods (2002–2006 and 2012–2016). It adopts an integrated methodology, intertwining various approaches and perspectives including corpus linguistics, move analysis, discourse analysis and interviews to address two main strands of research enquiry: (i) What are the properties of the rhetorical structures in terms of range, frequency, and length for each section of mechanical engineering research articles? (ii) What effect does sub-discipline, research tradition and publication date have on the rhetorical structure of research articles?

Download or read book Meshing Geometric Modeling and Numerical Simulation Volume 2 written by Paul Louis George and published by John Wiley & Sons. This book was released on 2019-01-25 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Triangulations, and more precisely meshes, are at the heart of many problems relating to a wide variety of scientific disciplines, and in particular numerical simulations of all kinds of physical phenomena. In numerical simulations, the functional spaces of approximation used to search for solutions are defined from meshes, and in this sense these meshes play a fundamental role. This strong link between meshes and functional spaces leads us to consider advanced simulation methods in which the meshes are adapted to the behaviors of the underlying physical phenomena. This book presents the basic elements of this vision of meshing. These mesh adaptations are generally governed by a posteriori error estimators representing an increase of the error with respect to a size or metric. Independently of this metric of calculation, compliance with a geometry can also be calculated using a so-called geometric metric. The notion of mesh thus finds its meaning in the metric of its elements.

Download or read book Numerical Simulation An Art of Prediction Volume 2 written by Jean-François Sigrist and published by John Wiley & Sons. This book was released on 2020-01-09 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation is a technique of major importance in various technical and scientific fields. Whilst engineering curricula now include training courses dedicated to it, numerical simulation is still not well-known in some economic sectors, and even less so among the general public. Simulation involves the mathematical modeling of the real world, coupled with the computing power offered by modern technology. Designed to perform virtual experiments, digital simulation can be considered as an "art of prediction". Embellished with a rich iconography and based on the testimony of researchers and engineers, this book shines a light on this little-known art. It is the second of two volumes and gives examples of the uses of numerical simulation in various scientific and technical fields: agriculture, industry, Earth and universe sciences, meteorology and climate studies, energy, biomechanics and human and social sciences.

Download or read book Milling Simulation written by Weihong Zhang and published by John Wiley & Sons. This book was released on 2016-06-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliable scheduling in cutting conditions is very important in machining processes, and this requires thorough understanding of the physical behaviors of the machining process, which cannot be achieved without understanding the underlying mechanism of the processes. The book describes the mechanics and dynamics together with the clamping principles in milling processes, and can be used as a guideline for graduate students and research engineers who wish to be effective manufacture engineers and researchers. Many books have focused on common principles, which are suitable for general machining processes, e.g., milling, turning and drilling, etc. This book specifically aims at exploring the mechanics and dynamics of milling processes. Original theoretical derivations and new observations on static cutting force models, dynamic stability models and clamping principles associated with milling processes are classified and detailed. The book is indented as a text for graduate students and machining engineers who wish to intensively learn milling mechanism and machine tool vibration.

Download or read book Deterministic Numerical Modeling of Soil Structure Interaction written by Stephane Grange and published by John Wiley & Sons. This book was released on 2022-01-26 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to describe soil–structure interaction in various situations (nonlinear, static, dynamic, hydro-mechanical couplings), this book gives an overview of the main modeling methods developed in geotechnical engineering. The chapters are centered around: the finite element method (FEM), the finite difference method (FDM), and the discrete element method (DEM). Deterministic Numerical Modeling of Soil–Structure Interaction allows the reader to explore the classical and well-known FEM and FDM, using interface and contact elements available for coupled hydro-mechanical problems. Furthermore, this book provides insight on the DEM, adapted for interaction laws at the grain level. Within a classical finite element framework, the concept of macro-element is introduced, which generalizes constitutive laws of SSI and is particularly straightforward in dynamic situations. Finally, this book presents the SSI, in the case of a group of structures, such as buildings in a town, using the notion of metamaterials and a geophysics approach.

Download or read book Geometric Modeling of Fractal Forms for CAD written by Christian Gentil and published by John Wiley & Sons. This book was released on 2021-05-11 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing and controlling complex shapes like porous volumes and rough surfaces is a challenge. Fractal geometry is an interesting approach which considerably simplify the problem. Even though underlying concepts reduce the set possible shapes, they generate a surprising variety of shapes. In this book we present a formalism to design such complex objects for geometric aided geometry design applications. The goal of this formalism is to provide to the end user the possibility to manipulate fractal objects as a standard euclidean object with standard tools of CAD system. This formalism encompass curves, surfaces, volumes, as well as NURBS and subdivision surfaces. All theoretical and practical aspects are developed, from the design up to 3D printing.