Download or read book Thin Liquid Films written by Ivan Ivanov and published by Taylor & Francis. This book was released on 2023-02-06 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference provided a systematic examination of both the theory and applications of thin liquid films - giving a critical review of major concepts and unresolved or controversial problems, as well as revealing experimental methods. It includes results previously unpublished. Combining the work of 20 leading researchers, Thin Liquid Films furnishes a fundamental overview of thermodynamics of thin liquid films. Generously illustrated with equations, tables and drawling and containing more than 2,200 citations to pertinent literature, this is an authoritative reference for physical, surface, and colloid chemists, biophysicists and physicists; chemical engineers and advanced graduate students in chemistry, chemical engineering, biophysics and physics.
Download or read book Emulsions Foams and Thin Films written by K.L. Mittal and published by CRC Press. This book was released on 2000-05-16 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the acomplishments of over 85 internationlly renowned scientists whose work was influenced by Professor Wasan's groundbreaking research on interfacial phenomena at The Illinois Institute of Technology, Chicago.
Download or read book Modeling of Structure and Forces in Thin Micellar Liquid Films written by Maria del Carmen Laso and published by . This book was released on 1993 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Detergents Part A written by Guy Broze and published by CRC Press. This book was released on 1999-04-14 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part A of this handbook describes the raw materials and potential interactions of detergent products before, during and after use, focusing on the development and mechanisms of action of cleaning components. The text presents the basic physiochemical concepts necessary to formulate new, safer and more effective detergent products.
Download or read book Flow and Combustion in Advanced Gas Turbine Combustors written by Johannes Janicka and published by Springer Science & Business Media. This book was released on 2012-10-29 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: With regard to both the environmental sustainability and operating efficiency demands, modern combustion research has to face two main objectives, the optimization of combustion efficiency and the reduction of pollutants. This book reports on the combustion research activities carried out within the Collaborative Research Center (SFB) 568 “Flow and Combustion in Future Gas Turbine Combustion Chambers” funded by the German Research Foundation (DFG). This aimed at designing a completely integrated modeling and numerical simulation of the occurring very complex, coupled and interacting physico-chemical processes, such as turbulent heat and mass transport, single or multi-phase flows phenomena, chemical reactions/combustion and radiation, able to support the development of advanced gas turbine chamber concepts
Download or read book Particles at Fluid Interfaces and Membranes written by P. Kralchevsky and published by Elsevier. This book was released on 2001-01-22 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the small world of micrometer to nanometer scale many natural and industrial processes include attachment of colloid particles (solid spheres, liquid droplets, gas bubbles or protein macromolecules) to fluid interfaces and their confinement in liquid films. This may lead to the appearance of lateral interactions between particles at interfaces, or between inclusions in phospholipid membranes, followed eventually by the formation of two-dimensional ordered arrays. The book is devoted to the description of such processes, their consecutive stages, and to the investigation of the underlying physico-chemical mechanisms. The first six chapters give a concise but informative introduction to the basic knowledge in surface and colloid science, which includes both traditional concepts and some recent results. Chapters 1 and 2 are devoted to the basic theory of capillarity, kinetics of surfactant adsorption, shapes of axisymmetric fluid interfaces, contact angles and line tension. Chapters 3 and 4 present a generalization of the theory of capillarity to the case, in which the variation of the interfacial (membrane) curvature contributes to the total energy of the system. The generalized Laplace equation is applied to determine the configurations of free and adherent biological cells. Chapters 5 and 6 are focused on the role of thin liquid films and hydrodynamic factors in the attachment of solid and fluid particles to an interface. Surface forces of various physical nature are presented and their relative importance is discussed. Hydrodynamic interactions of a colloidal particle with an interface (or another particle) are also considered.Chapters 7 to 10 are devoted to the theoretical foundation of various kinds of capillary forces. When two particles are attached to the same interface (membrane), capillary interactions, mediated by the interface or membrane, appear between them. Two major kinds of capillary interactions are described: (i) capillary immersion force related to the surface wettability (Chapter 7), (ii) capillary flotation force originating from interfacial deformations due to particle weight (Chapter 8). Special attention is paid to the theory of capillary immersion forces between particles entrapped in spherical liquid films (Chapter 9). A generalization of the theory of immersion forces allows one to describe membrane-mediated interactions between protein inclusions into a lipid bilayer (Chapter 10).Chapter 11 is devoted to the theory of the capillary bridges and the capillary-bridge forces, whose importance has been recognized in phenomena like consolidation of granules and soils, wetting of powders, capillary condensation, long-range hydrophobic attraction, etc. The nucleation of capillary bridges is also examined.Chapter 12 considers solid particles, which have an irregular wetting perimeter upon attachment to a fluid interface. The undulated contact line induces interfacial deformations, which engender a special lateral capillary force between the particles. The latter contributes to the dilatational and shear elastic moduli of particulate adsorption monolayers.Chapter 13 describes how lateral capillary forces, facilitated by convective flows and some specific and non-specific interactions, can lead to the aggregation and ordering of various particles at fluid interfaces or in thin liquid films. Recent results on fabricating two-dimensional (2D) arrays from micrometer and sub-micrometer latex particles, as well as 2D crystals from proteins and protein complexes, are reviewed. Chapter 14 presents applied aspects of the particle-surface interaction in antifoaming and defoaming. The mechanisms of antifoaming action involve as a necessary step the entering of an antifoam particle at the air-water interface. The considered mechanisms indicate the factors for control of foaminess.
Download or read book An Introduction to Inertial Confinement Fusion written by Susanne Pfalzner and published by CRC Press. This book was released on 2006-03-02 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newcomers to the field of inertial confinement fusion (ICF) often have difficulty establishing a clear picture of the overall field. The reason for this is because, while there are many books devoted to special topics within the field, there is none that provides an overview of the field as a whole. An Introduction to Inertial Confinement Fusion fi
Download or read book Oil Film Dynamics in Aero Engine Bearing Chambers written by Amir Aleem Hashmi and published by Logos Verlag Berlin GmbH. This book was released on 2012 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aero engine bearing chambers are complex machine elements inside the engines, supporting up to three concentric shafts on bearings. For safety reasons, the aero engines always employ rolling-element type bearings and therefore require a sufficient oil supply for lubrication in order to guarantee a reliable operation. As a consequence, a complex two-phase flow consisting of oil and sealing air governs the bearing chambers. A highly dynamic oil film, flowing along the chamber walls, plays a vital role to fulfill the tasks of cooling, lubricating and cleaning the bearing chambers. The design and optimization process of the bearing chambers requires a detailed understanding in order to accurately simulate the film behaviour inside the bearing chambers. Based on the earlier experimental investigations, it is known that near the scavenge off-take a relatively thick film exists. The numerical model to simulate these films must therefore take into account the elliptical behaviour of such films. Among the different models, the Volume Of Fluid (VOF) Model offers the best compromise between accuracy and efforts. However, preliminary attempts to model a fully developed and turbulent test case from literature revealed an unphysical pressure drop and velocity profile in the gas phase above the film flow. An inadequate turbulence modelling near the gas-liquid interface was identified as the problem source. The 2-Equation turbulence models (k- epsilon & k- omega) were extended to achieve a substantial improvement.
Download or read book Falling Liquid Films written by S. Kalliadasis and published by Springer Science & Business Media. This book was released on 2011-09-24 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Falling Liquid Films gives a detailed review of state-of-the-art theoretical, analytical and numerical methodologies, for the analysis of dissipative wave dynamics and pattern formation on the surface of a film falling down a planar inclined substrate. This prototype is an open-flow hydrodynamic instability, that represents an excellent paradigm for the study of complexity in active nonlinear media with energy supply, dissipation and dispersion. It will also be of use for a more general understanding of specific events characterizing the transition to spatio-temporal chaos and weak/dissipative turbulence. Particular emphasis is given to low-dimensional approximations for such flows through a hierarchy of modeling approaches, including equations of the boundary-layer type, averaged formulations based on weighted residuals approaches and long-wave expansions. Whenever possible the link between theory and experiment is illustrated, and, as a further bridge between the two, the development of order-of-magnitude estimates and scaling arguments is used to facilitate the understanding of basic, underlying physics. This monograph will appeal to advanced graduate students in applied mathematics, science or engineering undertaking research on interfacial fluid mechanics or studying fluid mechanics as part of their program. It will also be of use to researchers working on both applied, fundamental theoretical and experimental aspects of thin film flows, as well as engineers and technologists dealing with processes involving isothermal or heated films. This monograph is largely self-contained and no background on interfacial fluid mechanics is assumed.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interfacial Science for Geosystems Engineers written by Kishore K. Mohanty and published by Elsevier. This book was released on 2024-06-20 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfacial Science for Geosystems Engineers provides geoscientists the connections between the nano-scale physico-chemical interactions between fluids and minerals and the core/field-scale observations to manage energy extraction, water resources and subsurface storage, timely topics central to the energy transition. Packed with latest research and recent developments, chapter learning objectives, and illustrative diagrams, tables and charts throughout, this specialized volume will help geosystems engineers tackle the above challenges, by systematically going through the basics of surface and interfacial tension, capillarity, surfactants, surface free energy, adsorption, electrokinetics, colloidal stability, equilibrium and stability of thin liquid films, wettability, microemulsions, emulsions and foams, and polymers for subsurface applications. Useful as a teaching, training or reference text, Interfacial Science for Geosystems Engineers prepares today's subsurface scientists and engineers to tackle two pressing problems in the energy transition, by introducing recent developments on how to remove CO2 from our environment and how to wean ourselves off fossil energy while meeting growing energy demands. - Describes fundamentals and recent advances in interface and nanoparticle/colloid dispersion science - Offers critical analysis of the latest research and developments relevant to extracting low-carbon and other energy materials from, and store CO2 and H2 in, subsurface formations - Helps guide geosystems (especially energy) engineers on how to solve the problems they encounter in the rapidly evolving Energy Transition
Download or read book Fluid Mechanics of Surfactant and Polymer Solutions written by Victor Starov and published by Springer. This book was released on 2014-05-04 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal systems and dispersions are of great importance in oil recovery, waist water treatment, coating, food and beverage industry, pharmaceutical industry, medicine, environmental protection etc. Colloidal systems and dispersions are always multi-component and multiphase systems. In these systems at least one dimension is in a range of colloidal forces action: colloidal dispersions/emulsions are examples of three dimensional colloidal systems, while thin liquid films are examples of one dimensional colloidal systems. The contribution presented in this issue deals with flow, distribution and redistribution, coating and deposition of surfactant and polymer molecules in colloidal systems. The book presents reviews of recent advances and trends by well-know scientists and engineers in this area.
Download or read book Advances in Heat Transfer written by Young I. Cho and published by Academic Press. This book was released on 2011-11-28 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer fills the information gap between regularly scheduled journals and university-level textbooks by providing in-depth review articles over a broader scope than in journals or texts. The articles, which serve as a broad review for experts in the field, will also be of great interest to non-specialists who need to keep up-to-date with the results of the latest research. This serial is essential reading for all mechanical, chemical and industrial engineers working in the field of heat transfer, graduate schools or industry. Provides an overview of review articles on topics of current interest Bridges the gap between academic researchers and practitioners in industry A long-running and prestigious series
Download or read book Coating Materials written by Akarsh Verma and published by Springer Nature. This book was released on 2023-07-12 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews assorted types of coatings, their applications, and various strategies employed by several scientists and researchers to fabricate them. Exclusively, the recent progress in computational strategies that are helpful to optimize the best suitable coating formulation before one goes for the real-time fabrication has been discussed in detail. And this book is also intended to shed light on the computational modeling techniques that are used in the characterization of various coating materials. It covers mechanisms, salient features, formulations, important aspects, and case studies of coatings utilized for various applications. The latest research in this area as well as possible avenues of future research is also highlighted to encourage the researchers.
Download or read book Embedded Cooling Of Electronic Devices Conduction Evaporation And Single And Two phase Convection written by Madhusudan Iyengar and published by World Scientific. This book was released on 2024-01-10 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide on emerging cooling technologies for processors in microelectronics. It covers various topics such as chip-embedded two-phase cooling, monolithic microfluidic cooling, numerical modeling, and advances in materials engineering for conduction-limited direct contact cooling, with a goal to remedy high heat flux issues.The book also discusses the co-design of thermal and electromagnetic properties for the development of light and ultra-high efficiency electric motors. It provides an in-depth analysis of the scaling limits, challenges, and opportunities in embedded cooling, including high power RF amplifiers and self-emissive and liquid crystal displays. Its analysis of emerging cooling technologies provides a roadmap for the future of cooling technology in microelectronics.This book is a good starting point for the electrical and thermal engineers, as well as MS and PhD students, interested in understanding and collaboratively tackling the complex and multidisciplinary field of microelectronics device (embedded) cooling. A basic knowledge of heat conduction and convection is required.
Download or read book Fluid Physics Lecture Notes Of Summer Schools written by Manuel G Velarde and published by World Scientific. This book was released on 1995-03-07 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book pays tribute to 25 Singaporean South Asians who pioneered and excelled in their respective fields from 1950 to 2015. It is meant to be a 'quick take' on 25 Singaporean South Asian personalities, across a broad spectrum of professions and activities, who believed in the value and virtue of service to the community and gave the best of themselves.They had a sense of mission in their professions, dedicated to what they were doing and fostered a sense of community and nation. Many of them laid foundations that triggered the transformation of the island, including sportspeople whose records have stood the test of time. They were a people of their time whose work many may not know but which we hope will inspire others. This book is timely, for those who want to get a snapshot appreciation of the contributions of Singaporean South Asians.
Download or read book Foam Films and Foams written by Dotchi Exerowa and published by CRC Press. This book was released on 2018-07-27 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail the scientific philosophy of the formation and stabilization-destabilization of foams. It presents all hierarchical steps of a foam, starting from the properties of adsorption layers formed by foaming agents, discussing the properties of foam films as the building blocks of a foam, and then describing details of real foams, including many fields of application. The information presented in the book is useful to people working on the formulation of foams or attempting to avoid or destruct foams in unwanted situations.
