Download or read book Thin Films by Chemical Vapour Deposition written by C.E. Morosanu and published by Elsevier. This book was released on 2016-06-22 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: The explosive growth in the semiconductor industry has caused a rapid evolution of thin film materials that lend themselves to the fabrication of state-of-the-art semiconductor devices. Early in the 1960s an old research technique named chemical vapour phase deposition (CVD), which has several unique advantages, developed into the most widely used technique for thin film preparation in electronics technology. In the last 25 years, tremendous advances have been made in the science and technology of thin films prepared by means of CVD. This book presents in a single volume, an up-to-date overview of the important field of CVD processes which has never been completely reviewed previously. Contents: Part I. 1. Evolution of CVD Films. Introductory remarks. Short history of CVD thin films. II. Fundamentals. 2. Techniques of Preparing Thin Films. Electrolytic deposition techniques. Vacuum deposition techniques. Plasma deposition techniques. Liquid-phase deposition techniques. Solid-phase deposition techniques. Chemical vapour conversion of substrate. Chemical vapour deposition. Comparison between CVD and other thin film deposition techniques. 3. Chemical Processes Used in CVD. Introduction. Description of chemical reactions used in CVD. 4. Thermodynamics of CVD. Feasibility of a CVD process. Techniques for equilibrium calculations in CVD systems. Examples of thermodynamic studies of CVD systems. 5. Kinetics of CVD. Steps and control type of a CVD heterogeneous reaction. Influence of experimental parameters on thin film deposition rate. Continuous measurement of the deposition rate. Experimental methods for studying CVD kinetics. Role of homogeneous reactions in CVD. Mechanism of CVD processes. Kinetics and mechanism of dopant incorporation. Transport phenomena in CVD. Status of kinetic and mechanism investigations in CVD systems. 6. Measurement of Thin Film Thickness. Mechanical methods. Mechanical-optical methods. Optical methods. Electrical methods. Miscellaneous methods. 7. Nucleation and Growth of CVD Films. Stages in the nucleation and growth mechanism. Regimes of nucleation and growth. Nucleation theory. Dependence of nucleation on deposition parameters. Heterogeneous nucleation and CVD film structural forms. Homogeneous nucleation. Experimental techniques. Experimental results of CVD film nucleation. 8. Thin Film Structure. Techniques for studying thin film structure. Structural defects in CVD thin films. 9. Analysis of CVD Films. Analysis techniques of thin film bulk. Analysis techniques of thin film surfaces. Film composition measurement. Depth concentration profiling. 10. Properties of CVD Films. Mechanical properties. Thermal properties. Optical properties. Photoelectric properties. Electrical properties. Magnetic properties. Chemical properties. Part III. 11. Equipment and Substrates. Equipment for CVD. Safety in CVD. Substrates. 12. Preparation and Properties of Semiconducting Thin Films. Homoepitaxial semiconducting films. Heteroepitaxial semiconducting films. 13. Preparation and Properties of Amorphous Insulating Thin Films. Oxides. Nitrides and Oxynitrides. Polymeric thin films. 14. Preparation and Properties of Conductive Thin Films. Metals and metal alloys. Resistor materials. Transparent conducting films. Miscellaneous materials. 15. Preparation and Properties of Superconducting and Magnetic Thin Films. Superconducting materials. Magnetic materials. 16. Uses of CVD Thin Films. Applications in electronics and microelectronics. Applications in the field of microwaves and optoelectronics. Miscellaneous applications. Artificial heterostructures (Quantum wells, superlattices, monolayers, two-dimensional electron gases). Part V. 17. Present and Future Importance of CVD Films.
Download or read book Chemical Vapor Deposition Polymerization written by Jeffrey B. Fortin and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Vapor Deposition Polymerization - The Growth and Properties of Parylene Thin Films is intended to be valuable to both users and researchers of parylene thin films. It should be particularly useful for those setting up and characterizing their first research deposition system. It provides a good picture of the deposition process and equipment, as well as information on system-to-system variations that is important to consider when designing a deposition system or making modifications to an existing one. Also included are methods to characterizae a deposition system's pumping properties as well as monitor the deposition process via mass spectrometry. There are many references that will lead the reader to further information on the topic being discussed. This text should serve as a useful reference source and handbook for scientists and engineers interested in depositing high quality parylene thin films.
Download or read book Principles of Vapor Deposition of Thin Films written by Professor K.S. K.S Sree Harsha and published by Elsevier. This book was released on 2005-12-16 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of producing devices that are smaller, faster, more functional, reproducible, reliable and economical has given thin film processing a unique role in technology. Principles of Vapor Deposition of Thin Films brings in to one place a diverse amount of scientific background that is considered essential to become knowledgeable in thin film depostition techniques. Its ultimate goal as a reference is to provide the foundation upon which thin film science and technological innovation are possible. * Offers detailed derivation of important formulae. * Thoroughly covers the basic principles of materials science that are important to any thin film preparation. * Careful attention to terminologies, concepts and definitions, as well as abundance of illustrations offer clear support for the text.
Download or read book Chemical Vapour Deposition written by Anthony C. Jones and published by Royal Society of Chemistry. This book was released on 2009 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book is one of the most comprehensive overviews ever written on the key aspects of chemical vapour deposition processes and it is more comprehensive, technically detailed and up-to-date than other books on CVD. The contributing authors are all practising CVD technologists and are leading international experts in the field of CVD. It presents a logical and progressive overview of the various aspects of CVD processes. Basic concepts, such as the various types of CVD processes, the design of CVD reactors, reaction modelling and CVD precursor chemistry are covered in the first few"--Jacket
Download or read book Chemical Vapor Deposition written by S Neralla and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of chemical vapor deposition (CVD) methods and recent advances in developing novel materials for application in various fields. CVD has now evolved into the most widely used technique for growth of thin films in electronics industry. Several books on CVD methods have emerged in the past, and thus the scope of this book goes beyond providing fundamentals of the CVD process. Some of the chapters included highlight current limitations in the CVD methods and offer alternatives in developing coatings through overcoming these limitations.
Download or read book Chemical Vapour Deposition CVD written by Kwang-Leong Choy and published by CRC Press. This book was released on 2019-06-07 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely and complete overview on chemical vapour deposition (CVD) and its variants for the processing of nanoparticles, nanowires, nanotubes, nanocomposite coatings, thin and thick films, and composites. Chapters discuss key aspects, from processing, material structure and properties to practical use, cost considerations, versatility, and sustainability. The author presents a comprehensive overview of CVD and its potential in producing high performance, cost-effective nanomaterials and thin and thick films. Features Provides an up-to-date introduction to CVD technology for the fabrication of nanomaterials, nanostructured films, and composite coatings Discusses processing, structure, functionalization, properties, and use in clean energy, engineering, and biomedical grand challenges Covers thin and thick films and composites Compares CVD with other processing techniques in terms of structure/properties, cost, versatility, and sustainability Kwang-Leong Choy is the Director of the UCL Centre for Materials Discovery and Professor of Materials Discovery in the Institute for Materials Discovery at the University College London. She earned her D.Phil. from the University of Oxford, and is the recipient of numerous honors including the Hetherington Prize, Oxford Metallurgical Society Award, and Grunfeld Medal and Prize from the Institute of Materials (UK). She is an elected fellow of the Institute of Materials, Minerals and Mining, and the Royal Society of Chemistry.
Download or read book Chemical Physics of Thin Film Deposition Processes for Micro and Nano Technologies written by Y. Pauleau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date collection of tutorial papers on the latest advances in the deposition and growth of thin films for micro and nano technologies. The emphasis is on fundamental aspects, principles and applications of deposition techniques used for the fabrication of micro and nano devices. The deposition of thin films is described, emphasising the gas phase and surface chemistry and its effects on the growth rates and properties of films. Gas-phase phenomena, surface chemistry, growth mechanisms and the modelling of deposition processes are thoroughly described and discussed to provide a clear understanding of the growth of thin films and microstructures via thermally activated, laser induced, photon assisted, ion beam assisted, and plasma enhanced vapour deposition processes. A handbook for engineers and scientists and an introduction for students of microelectronics.
Download or read book Chemical Vapor Deposition written by Jong-Hee Park and published by ASM International. This book was released on 2001 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Chemical Vapor Deposition written by Dimitra Vernardou and published by MDPI. This book was released on 2021-01-15 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pursuing a scalable production methodology for materials and advancing it from the laboratory to industry is beneficial to novel daily-life applications. From this perspective, chemical vapor deposition (CVD) offers a compromise between efficiency, controllability, tunability and excellent run-to-run repeatability in the coverage of monolayers on substrates. Hence, CVD meets all of the requirements for industrialization in basically all areas, including polymer coatings, metals, water-filtration systems, solar cells and so on. The Special Issue “Advances in Chemical Vapor Deposition” is dedicated to providing an overview of the latest experimental findings and identifying the growth parameters and characteristics of perovskites, TiO2, Al2O3, VO2 and V2O5 with desired qualities for potentially useful devices.
Download or read book Chemical Vapor Deposition CVD written by Levi Karlsson and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical vapor deposition (CVD) refers to a vacuum deposition method used to produce high quality, high-performance, solid materials in a variety of manufacturing industries. Chapter One provides a critical review of published experimental data for thin films of silicon nitride deposited by thermal and plasma CVD, plasma CVD, high density plasma CVD, atomic layer-by-layer deposition, and hot-wire CVD. Chapter Two describes several aspects of the use of CVD for single-crystal diamond synthesis for electronics. Chapter Three describes the properties of graphene and its preparation by a number of methods with a focus on the classical CVD method on copper foil together with graphene transfer onto a dielectric substrate.
Download or read book Non Classical Crystallization of Thin Films and Nanostructures in CVD and PVD Processes written by Nong Moon Hwang and published by Springer. This book was released on 2016-06-14 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to a recently-developed approach to the growth mechanism of thin films and nanostructures via chemical vapour deposition (CVD). Starting from the underlying principles of the low pressure synthesis of diamond films, it is shown that diamond growth occurs not by individual atoms but by charged nanoparticles. This newly-discovered growth mechanism turns out to be general to many CVD and some physical vapor deposition (PVD) processes. This non-classical crystallization is a new paradigm of crystal growth, with active research taking place on growth in solution, especially in biomineralization processes. Established understanding of the growth of thin films and nanostructures is based around processes involving individual atoms or molecules. According to the author’s research over the last two decades, however, the generation of charged gas phase nuclei is shown to be the rule rather than the exception in the CVD process, and charged gas phase nuclei are actively involved in the growth of films or nanostructures. This new understanding is called the theory of charged nanoparticles (TCN). This book describes how the non-classical crystallization mechanism can be applied to the growth of thin films and nanostructures in gas phase synthesis. Based on the author’s graduate lecture course, the book is aimed at senior undergraduate and graduate students and researchers in the field of thin film and nanostructure growth or crystal growth. It is hoped that a new understanding of the growth processes of thin films and nanostructures will reduce trial-and-error in research and in industrial fabrication processes.
Download or read book Thin Film Processes II written by Werner Kern and published by Elsevier. This book was released on 2012-12-02 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: This sequel to the 1978 classic, Thin Film Processes, gives a clear, practical exposition of important thin film deposition and etching processes that have not yet been adequately reviewed. It discusses selected processes in tutorial overviews with implementation guide lines and an introduction to the literature. Though edited to stand alone, when taken together, Thin Film Processes II and its predecessor present a thorough grounding in modern thin film techniques. Provides an all-new sequel to the 1978 classic, Thin Film Processes Introduces new topics, and several key topics presented in the original volume are updated Emphasizes practical applications of major thin film deposition and etching processes Helps readers find the appropriate technology for a particular application
Download or read book Chemical Vapour Deposition of Coatings written by K. L. Choy and published by . This book was released on 2003 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CVD Polymers written by Karen K. Gleason and published by John Wiley & Sons. This book was released on 2015-04-01 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The method of CVD (chemical vapor deposition) is a versatile technique to fabricate high-quality thin films and structured surfaces in the nanometer regime from the vapor phase. Already widely used for the deposition of inorganic materials in the semiconductor industry, CVD has become the method of choice in many applications to process polymers as well. This highly scalable technique allows for synthesizing high-purity, defect-free films and for systematically tuning their chemical, mechanical and physical properties. In addition, vapor phase processing is critical for the deposition of insoluble materials including fluoropolymers, electrically conductive polymers, and highly crosslinked organic networks. Furthermore, CVD enables the coating of substrates which would otherwise dissolve or swell upon exposure to solvents. The scope of the book encompasses CVD polymerization processes which directly translate the chemical mechanisms of traditional polymer synthesis and organic synthesis in homogeneous liquids into heterogeneous processes for the modification of solid surfaces. The book is structured into four parts, complemented by an introductory overview of the diverse process strategies for CVD of polymeric materials. The first part on the fundamentals of CVD polymers is followed by a detailed coverage of the materials chemistry of CVD polymers, including the main synthesis mechanisms and the resultant classes of materials. The third part focuses on the applications of these materials such as membrane modification and device fabrication. The final part discusses the potential for scale-up and commercialization of CVD polymers.
Download or read book Principles of Chemical Vapor Deposition written by Daniel Dobkin and published by Springer Science & Business Media. This book was released on 2003-04-30 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Chemical Vapor Deposition provides a simple introduction to heat and mass transfer, surface and gas phase chemistry, and plasma discharge characteristics. In addition, the book includes discussions of practical films and reactors to help in the development of better processes and equipment. This book will assist workers new to chemical vapor deposition (CVD) to understand CVD reactors and processes and to comprehend and exploit the literature in the field. The book reviews several disparate fields with which many researchers may have only a passing acquaintance, such as heat and mass transfer, discharge physics, and surface chemistry, focusing on key issues relevant to CVD. The book also examines examples of realistic industrial reactors and processes with simplified analysis to demonstrate how to apply the principles to practical situations. The book does not attempt to exhaustively survey the literature or to intimidate the reader with irrelevant mathematical apparatus. This book is as simple as possible while still retaining the essential physics and chemistry. The book is generously illustrated to assist the reader in forming the mental images which are the basis of understanding.
Download or read book Chemical vapour deposition of boron carbon thin films from organoboron precursors written by Maiwulidan (Mewlude) Yimamu (Imam) and published by Linköping University Electronic Press. This book was released on 2016-01-13 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boron-carbon (BxC) thin films enriched in 10B are potential neutron converting layers for 10Bbased solid-state neutron detectors given the good neutron absorption cross-section of 10B atoms in the thin film. Chemical Vapour Deposition (CVD) of such films faces the challenge that the maximum temperature tolerated by the aluminium substrate is 660 °C and low temperature CVD routes for BxC films are thus needed. This thesis presents the use of two different organoboron precursors, triethylboron –B(C2H5)3 (TEB) and trimethylboron – B(CH3)3 (TMB) as single-source precursors for CVD of BxC thin films. The CVD behaviour of TEB in thermal CVD has been studied by both BxC thin film deposition and quantum chemical calculations of the gas phase chemistry at the corresponding CVD conditions. The calculations predict that the gas phase reactions are dominated by ?-hydride eliminations of C2H4 to yield BH3. In addition, a complementary bimolecular reaction path based on H2-assisted C2H6 elimination to BH3 is also present at lower temperatures in the presence of hydrogen molecules. A temperature window of 600 – 1000 °C for deposition of X-ray amorphous BxC films with 2.5 ? x ? 4.5 is identified showing good film density (2.40 – 2.65 g/cm3) which is close to the bulk density of crystalline B4C, 2.52 g/cm3 and high hardness (29 – 39 GPa). The impurity level of H is lowered to < 1 at. % within the temperature window. Plasma chemical vapour deposition has been studied using TMB as single-source precursor in Ar plasma for investigating BxC thin film deposition at lower temperature than allowed by thermal CVD and further understanding of thin film deposition process. The effect of plasma power, total pressure, TMB and Ar gas flow on film composition and morphology are investigated. The highest B/C ratio of 1.9 is obtained at highest plasma power of 2400 W and TMB flow of 7 sccm. The H content in the films seems constant at 15±5 at. %. The B-C bond is dominant in the films with small amount of C-C and B-O bonds, which are likely due to the formation of amorphous carbon and surface oxidation, respectively. The film density is determined as 2.16±0.01 g/cm3 and the internal compressive stresses are measured to be <400 MPa.
Download or read book The Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared as a textbook complete with problems after each chapter, specifically intended for classroom use in universities.
