Download or read book Thermophysical Properties of Materials written by G. Grimvall and published by Elsevier. This book was released on 1999-09-22 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a thoroughly revised version of the original book published in 1986. About half of the contents of the previous version remain essentially unchanged, and one quarter has been rewritten and updated. The rest consists of completely new and extended material. Recent research has focussed on new materials made through "molecular engineering", and computational materials science through ab initio electron structure calculations. Another trend is the ever growing interdisciplinary aspect of both basic and applied materials science. There is an obvious need for reviews that link well established results to the modern approaches. One purpose of this book is to provide such an overview in a specific field of materials science, namely thermophysical phenomena that are intimately connected with the lattice vibrations of solids. This includes, e.g., elastic properties and electrical and thermal transport. Furthermore, this book attempts to present the results in such a form that the reader can clearly see their domain of applicability, for instance if and how they depend on crystal structure, defects, applied pressure, crystal anisotropy etc. The level and presentation is such that the results can be immediately used in research. Graduate students in condensed matter physics, metallurgy, inorganic chemistry or geophysical materials will benefit from this book as will theoretical physicists and scientists in industrial research laboratories.
Download or read book Thermal Properties of Matter written by Joe Khachan and published by Morgan & Claypool Publishers. This book was released on 2018-02-20 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ancient Greeks believed that all matter was composed of four elements: earth, water, air, and fire. By a remarkable coincidence (or perhaps not), today we know that there are four states of matter: solids (e.g. earth), liquids (e.g. water), gasses (e.g. air) and plasma (e.g. ionized gas produced by fire). The plasma state is beyond the scope of this book and we will only look at the first three states. Although on the microscopic level all matter is made from atoms or molecules, everyday experience tells us that the three states have very different properties. The aim of this book is to examine some of these properties and the underlying physics.
Download or read book Preparation Characterization Properties and Application of Nanofluid written by I. M. Mahbubul and published by William Andrew. This book was released on 2018-09-20 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preparation, Characterization, Properties and Application of Nanofluid begins with an introduction of colloidal systems and their relation to nanofluid. Special emphasis on the preparation of stable nanofluid and the impact of ultrasonication power on nanofluid preparation is also included, as are characterization and stability measurement techniques. Other topics of note in the book include the thermophysical properties of nanofluids as thermal conductivity, viscosity, and density and specific heat, including the figure of merit of properties. In addition, different parameters, like particle type, size, concentration, liquid type and temperature are discussed based on experimental results, along with a variety of other important topics. The available model and correlations used for nanofluid property calculation are also included. - Provides readers with tactics on nanofluid preparation methods, including how to improve their stability - Explores the effect of preparation method and stability on thermophysical and rheological properties of nanofluids - Assesses the available model and correlations used for nanofluid property calculation
Download or read book Thermal Properties Measurement of Materials written by Yves Jannot and published by John Wiley & Sons. This book was released on 2018-03-07 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the main methods used for thermal properties measurement. It aims to be accessible to all those, specialists in heat transfer or not, who need to measure the thermal properties of a material. The objective is to allow them to choose the measurement method the best adapted to the material to be characterized, and to pass on them all the theoretical and practical information allowing implementation with the maximum of precision.
Download or read book Thermal Expansion written by Y. S. Touloukian and published by Springer. This book was released on 1977 with total page 1812 pages. Available in PDF, EPUB and Kindle. Book excerpt: that about 100 journals are required to yield fifty In 1957, the Thermophysical Properties Research percent. But that other fifty percent! It is scattered Center (TPRC) of Purdue University, under the leadership of its founder, Professor Y. S. Touloukian, through more than 3500 journals and other docu began to develop a coordinated experimental, ments, often items not readily identifiable or ob tainable. Over 85,000 references are now in the theoretical, and literature review program covering a set of properties of great importance to science and files. technology. Over the years, this program has grown Thus, the man who wants to use existing data, rather than make new measurements himself, faces steadily, producing bibliographies, data compila a long and costly task if he wants to assure himself tions and recommendations, experimental measure ments, and other output. The series of volumes for that he has found all the relevant results. More often which these remarks constitute a foreword is one of than not, a search for data stops after one or two results are found-or after the searcher decides he these many important products. These volumes are a monumental accomplishment in themselves, re has spent enough time looking. Now with the quiring for their production the combined knowledge appearance of these volumes, the scientist or engineer and skills of dozens of dedicated specialists. The who needs these kinds of data can consider himself very fortunate.
Download or read book Thermochemical properties of inorganic substances written by I. Barin and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the practical application of thermochemistry to the development and control of tech nical processes, the data for as many substances as possible are needed in conjunction with rapid and simple methods of calculating equilibrium constants, heat balances and the EMF of galvanic cells. For these three types of calculation the following three ther modynamic functions are suitable: The Planck function, the enthalpy and the Gibbs free energy, which are here defined and tabulated as unambigous functions of temperature for pure substances. The first edition of the tables was published in 1973 under the title "Thermochemical Properties of Inorganic Substances". The present supplementary volume contains the data and functions for a further 800 inorganic substances. In addition, the data for about 250 substances from the first volume have been up-dated. These usually small corrections produce better consistency with the data from more recent publications. The comments of users and reviewers of the first volume have largely been concerned with the difference between the present thermodynamic functions and the system used in the JANAF tables, the somewhat unconventional handling of heat balances adopted here, the notation of cell reactions, the description of non-stoichiometric phases and the accuracy of the tabulated data. To answer these questions and criticims the theore tical concepts and the practical use of the tables are dealt with in more detail in the introduction, following the recommendation of some reviewers.
Download or read book Thermal Properties of Solids at Room and Cryogenic Temperatures written by Guglielmo Ventura and published by Springer. This book was released on 2014-06-23 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The minimum temperature in the natural universe is 2.7 K. Laboratory refrigerators can reach temperatures in the microkelvin range. Modern industrial refrigerators cool foods at 200 K, whereas space mission payloads must be capable of working at temperatures as low as 20 K. Superconducting magnets used for NMR work at 4.2 K. Hence the properties of materials must be accurately known also at cryogenic temperatures. This book provides a guide for engineers, physicists, chemists, technicians who wish to approach the field of low-temperature material properties. The focus is on the thermal properties and a large spectrum of experimental cases is reported. The book presents updated tables of low-temperature data on materials and a thorough bibliography supplements any further research. Key Features include: ° Detailed technical description of experiments ° Description of the newest cryogenic apparatus ° Offers data on cryogenic properties of the latest new materials ° Current reference review
Download or read book Specific Heat written by Yeram Sarkis Touloukian and published by Springer. This book was released on 1970 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Radiative Properties written by Y.S. Touloukian and published by Springer. This book was released on 2014-01-18 with total page 1859 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommended Values of Thermophysical Properties for Selected Commercial Alloys written by K. C. Mills and published by Woodhead Publishing. This book was released on 2002 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermophysical Properties of Complex Materials written by Aamir Shahzad and published by BoD – Books on Demand. This book was released on 2020-03-25 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assists in the exchange of research and progress outcomes concerned with the latest issues in thermophysical properties (TPPs) of complex liquids research, development, and production. Topics cover the control of transport properties of metallic alloys, thermal analysis of complex plasmas and instabilities in plasma devices, thermophysical properties at nanolevel, theoretical background of viscosities of hydrocarbons at varying temperature and pressure ranges, molecular modeling, and experimental investigations based on nanofluids and ionic conduction in solid-state electrolytes for thermodynamic data. This book enables global researchers to tackle the challenges that continue to generate cost-effective TPPs and the latest understanding in the development of complex materials and the collaboration of modern thermophysical generating technologies. Moreover, it provides a platform for different regional authors to exchange scientific knowledge and generate enthusiasm for science and technology.
Download or read book Thermal Diffusivity written by Y. S. Touloukian and published by Springer. This book was released on 2013-11-13 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selected Properties of Hydrogen engineering Design Data written by Robert D. McCarty and published by . This book was released on 1981 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Specific Heat written by Y. S. Touloukian and published by Springer. This book was released on 2013-12-31 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Properties of Gases and Liquids 5E written by Bruce E. Poling and published by McGraw Hill Professional. This book was released on 2000-11-27 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Must-have reference for processes involving liquids, gases, and mixtures Reap the time-saving, mistake-avoiding benefits enjoyed by thousands of chemical and process design engineers, research scientists, and educators. Properties of Gases and Liquids, Fifth Edition, is an all-inclusive, critical survey of the most reliable estimating methods in use today --now completely rewritten and reorganized by Bruce Poling, John Prausnitz, and John O’Connell to reflect every late-breaking development. You get on-the-spot information for estimating both physical and thermodynamic properties in the absence of experimental data with this property data bank of 600+ compound constants. Bridge the gap between theory and practice with this trusted, irreplaceable, and expert-authored expert guide -- the only book that includes a critical analysis of existing methods as well as hands-on practical recommendations. Areas covered include pure component constants; thermodynamic properties of ideal gases, pure components and mixtures; pressure-volume-temperature relationships; vapor pressures and enthalpies of vaporization of pure fluids; fluid phase equilibria in multicomponent systems; viscosity; thermal conductivity;diffusion coefficients; and surface tension.
Download or read book Thermodynamic Properties of Individual Substances written by L. V. Gurvich and published by CRC-Press. This book was released on 1994-02-09 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The NBS Tables of Chemical Thermodynamic Properties written by Donald D. Wagman and published by . This book was released on 1982 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
