Download or read book Thermophysical Properties of Nitrogen From the Fusion Line to 3500 R 1944 K For Pressures to 150000 Psia 10342 X 10 5 N M2 Classic Reprint written by Richard T. Jacobsen and published by Forgotten Books. This book was released on 2018-03-19 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Thermophysical Properties of Nitrogen From the Fusion Line to 3500 R (1944 K) For Pressures to 150000 Psia (10342 X 10 5 N/M2) The work reported in this technical note was carried out in two parts in different locations. The equation of state work was carried out at the University of Idaho (section 2) while the transport and other properties (sections 3-9) work was carried out in the Cryogenic Data Center of the National Bureau of Standards in Boulder, Colorado. In this joint publication we have assembled under a single cover values for many of the properties of nitrogen which until now, if available at all, have been scattered through the world' 3 literature. The tabular data presented here represent best values for each property at this time. Computer programs to calculate the properties presented in these tables are also available. Inquiries should be addressed to the National Bureau of Standards. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Thermophysical Properties of Nitrogen from the Fusion Line to 3500 R 1944 K for Pressures to 150 000 Psia 10342 X 105 N m2 written by United States. National Bureau of Standards and published by . This book was released on 1973 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermophysical Properties of Nitrogen from the Fusion Line to 3500 R 1944 K for Pressures to 150 000 Psia 10342 X 105 N m2 written by Richard T. Jacobsen and published by . This book was released on 1973 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tables of thermophysical properties of nitrogen are presented for temperatures from the fusion line to 3500 R for pressures to 3000 psia, and from the fusion line to 1500 R for pressures above 3000 psia to 150,000 psia. The tables include values of entropy, enthalpy, internal energy, density, specific volume, velocity of sound, specific heats (C(v) and C(p)), thermal conductivity, viscosity, thermal diffusivity, Prandtl number, and the dielectric constant for selected isobars. Additional tables are included for values of PVT relationships which have special utility in heat transfer calculations. Tables of selected isobars for the liquid and vapor phases, and for the saturated vapor and saturated liquid are included. An equation of state is presented for liquid and gaseous nitrogen for the temperature and pressure ranges of these tables. In the determination of the equation of state, all of the P-rho-T (pressure-density-temperature) data available from the published literature were reviewed, and appropriate corrections made to bring experimental temperatures into accord with the International Practical Temperature Scale of 1968. A vapor pressure equation, melting curve equation, and an equation to represent the ideal gas heat capacity of nitrogen are also presented.
Download or read book Thermophysical Properties of Nitrogen from the Fusion Line to 3500 R 1944 K for Pressures to 150 000 Psia 10342 X 10 N m written by and published by . This book was released on 1973 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermophysical properties of nitrogen from the fusion line to 3500 R 1944 K for presures to 150 000 PSIA 10342 x 10e5 n m2 written by R. T. Jacobson and published by . This book was released on 1973 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermophysical Properties of Nitrogen from the Fusion Line to 3500 R 1944 K for Pressures to 150 000 PSIA 10342 X 105 N written by and published by . This book was released on 1973 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermophysical properties of nitrogen from the fusion line to 3500 R 1944 K for pressures to 150 000 PSIA 10342 X 10 5 N written by and published by . This book was released on 1973 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Thermodynamic Properties of Nitrogen from 114 to 540 R Between 1 0 and 3000 Psia Supplement a British Units Classic Reprint written by Thomas R. Strobridge and published by Forgotten Books. This book was released on 2018-05-03 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Thermodynamic Properties of Nitrogen From 114 to 540 R Between 1. 0 and 3000 Psia Supplement a (British Units) Tabular values in metric units over the same pressure and temperature range are available as Technical Note 129. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Thermodynamic Properties of Oxygen and Nitrogen written by Richard Byron Stewart and published by . This book was released on 1972 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Engineering Thermodynamics written by Adrian Bejan and published by John Wiley & Sons. This book was released on 2016-09-19 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced, practical approach to the first and second laws of thermodynamics Advanced Engineering Thermodynamics bridges the gap between engineering applications and the first and second laws of thermodynamics. Going beyond the basic coverage offered by most textbooks, this authoritative treatment delves into the advanced topics of energy and work as they relate to various engineering fields. This practical approach describes real-world applications of thermodynamics concepts, including solar energy, refrigeration, air conditioning, thermofluid design, chemical design, constructal design, and more. This new fourth edition has been updated and expanded to include current developments in energy storage, distributed energy systems, entropy minimization, and industrial applications, linking new technologies in sustainability to fundamental thermodynamics concepts. Worked problems have been added to help students follow the thought processes behind various applications, and additional homework problems give them the opportunity to gauge their knowledge. The growing demand for sustainability and energy efficiency has shined a spotlight on the real-world applications of thermodynamics. This book helps future engineers make the fundamental connections, and develop a clear understanding of this complex subject. Delve deeper into the engineering applications of thermodynamics Work problems directly applicable to engineering fields Integrate thermodynamics concepts into sustainability design and policy Understand the thermodynamics of emerging energy technologies Condensed introductory chapters allow students to quickly review the fundamentals before diving right into practical applications. Designed expressly for engineering students, this book offers a clear, targeted treatment of thermodynamics topics with detailed discussion and authoritative guidance toward even the most complex concepts. Advanced Engineering Thermodynamics is the definitive modern treatment of energy and work for today's newest engineers.
Download or read book Thermal Design and Optimization written by Adrian Bejan and published by John Wiley & Sons. This book was released on 1995-12-12 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and rigorous introduction to thermal system designfrom a contemporary perspective Thermal Design and Optimization offers readers a lucid introductionto the latest methodologies for the design of thermal systems andemphasizes engineering economics, system simulation, andoptimization methods. The methods of exergy analysis, entropygeneration minimization, and thermoeconomics are incorporated in anevolutionary manner. This book is one of the few sources available that addresses therecommendations of the Accreditation Board for Engineering andTechnology for new courses in design engineering. Intended forclassroom use as well as self-study, the text provides a review offundamental concepts, extensive reference lists, end-of-chapterproblem sets, helpful appendices, and a comprehensive case studythat is followed throughout the text. Contents include: * Introduction to Thermal System Design * Thermodynamics, Modeling, and Design Analysis * Exergy Analysis * Heat Transfer, Modeling, and Design Analysis * Applications with Heat and Fluid Flow * Applications with Thermodynamics and Heat and Fluid Flow * Economic Analysis * Thermoeconomic Analysis and Evaluation * Thermoeconomic Optimization Thermal Design and Optimization offers engineering students,practicing engineers, and technical managers a comprehensive andrigorous introduction to thermal system design and optimizationfrom a distinctly contemporary perspective. Unlike traditionalbooks that are largely oriented toward design analysis andcomponents, this forward-thinking book aligns itself with anincreasing number of active designers who believe that moreeffective, system-oriented design methods are needed. Thermal Design and Optimization offers a lucid presentation ofthermodynamics, heat transfer, and fluid mechanics as they areapplied to the design of thermal systems. This book broadens thescope of engineering design by placing a strong emphasis onengineering economics, system simulation, and optimizationtechniques. Opening with a concise review of fundamentals, itdevelops design methods within a framework of industrialapplications that gradually increase in complexity. Theseapplications include, among others, power generation by large andsmall systems, and cryogenic systems for the manufacturing,chemical, and food processing industries. This unique book draws on the best contemporary thinking aboutdesign and design methodology, including discussions of concurrentdesign and quality function deployment. Recent developments basedon the second law of thermodynamics are also included, especiallythe use of exergy analysis, entropy generation minimization, andthermoeconomics. To demonstrate the application of important designprinciples introduced, a single case study involving the design ofa cogeneration system is followed throughout the book. In addition, Thermal Design and Optimization is one of the best newsources available for meeting the recommendations of theAccreditation Board for Engineering and Technology for more designemphasis in engineering curricula. Supported by extensive reference lists, end-of-chapter problemsets, and helpful appendices, this is a superb text for both theclassroom and self-study, and for use in industrial design,development, and research. A detailed solutions manual is availablefrom the publisher.
Download or read book The Physics of Life written by Adrian Bejan and published by Macmillan. This book was released on 2016-05-24 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: An empowering new view of the nature of physics and the constant evolution of our physical and social world
Download or read book Design in Nature written by Adrian Bejan and published by Anchor. This book was released on 2013-01-08 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this groundbreaking book, Adrian Bejan takes the recurring patterns in nature—trees, tributaries, air passages, neural networks, and lightning bolts—and reveals how a single principle of physics, the constructal law, accounts for the evolution of these and many other designs in our world. Everything—from biological life to inanimate systems—generates shape and structure and evolves in a sequence of ever-improving designs in order to facilitate flow. River basins, cardiovascular systems, and bolts of lightning are very efficient flow systems to move a current—of water, blood, or electricity. Likewise, the more complex architecture of animals evolve to cover greater distance per unit of useful energy, or increase their flow across the land. Such designs also appear in human organizations, like the hierarchical “flowcharts” or reporting structures in corporations and political bodies. All are governed by the same principle, known as the constructal law, and configure and reconfigure themselves over time to flow more efficiently. Written in an easy style that achieves clarity without sacrificing complexity, Design in Nature is a paradigm-shifting book that will fundamentally transform our understanding of the world around us.
Download or read book Shape and Structure from Engineering to Nature written by Adrian Bejan and published by Cambridge University Press. This book was released on 2000-10-16 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seemingly universal geometric forms unite the flow systems of engineering and nature. For example, tree-shaped flows can be seen in computers, lungs, dendritic crystals, urban street patterns, and communication links. In this groundbreaking book, Adrian Bejan considers the design and optimization of engineered systems and discovers a deterministic principle of the generation of geometric form in natural systems. Shape and structure spring from the struggle for better performance in both engineering and nature. This idea is the basis of the new constructal theory: the objective and constraints principle used in engineering is the same mechanism from which the geometry in natural flow systems emerges. From heat exchangers to river channels, the book draws many parallels between the engineered and the natural world. Among the topics covered are mechanical structure, thermal structure, heat trees, ducts and rivers, turbulent structure, and structure in transportation and economics. The numerous illustrations, examples, and homework problems in every chapter make this an ideal text for engineering design courses. Its provocative ideas will also appeal to a broad range of readers in engineering, natural sciences, economics, and business.
Download or read book Design with Constructal Theory written by Adrian Bejan and published by John Wiley & Sons. This book was released on 2008-09-09 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design course on the universal principle of configurations in nature and engineering-the constructal law Design with Constructal Theory offers a revolutionary new approach based on physics for understanding and predicting the designs that arise in nature and engineering, from the tree and the forest to the cooling of electronics, urban design, decontamination, and vascular smart materials. This book shows how you can use the method of constructal theory to design human-made systems in order to reduce trial and error and increase the system performance. First developed in the late 1990s, constructal theory holds that flow architecture arises from the natural evolutionary tendency to generate greater flow access in time and in flow configurations that are free to morph. It unites flow systems with solid mechanical structures, which are viewed as systems for the flow of stresses. Constructal theory unites nature with engineering, and helps us generate novel designs across the board, from high-density packages to vascular materials with new functionalities (self-healing, self-cooling), and from tree-shaped heat exchangers to svelte fluid-flow and solid structures. Design with Constructal Theory starts with basic principles and then shows how these principles are applied to understanding and designing increasingly complex systems. Problems and exercises at the end of each chapter give you an opportunity to use constructal theory to solve actual design problems. This book is based on a design course developed by the two authors for upper-level undergraduates and graduate students at Duke University and other universities all over the world. With the authors' expert guidance, students and professionals in mechanical, civil, environmental, chemical, aerospace, and biomedical engineering will understand natural systems, and then practice design as science, by relying on constructal strategies to pursue and discover novel and effective designs.
Download or read book Entropy Generation Minimization written by Adrian Bejan and published by CRC Press. This book was released on 2013-10-29 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the diverse and rapidly expanding field of Entropy Generation Minimization (EGM), the method of thermodynamic optimization of real devices. The underlying principles of the EGM method - also referred to as "thermodynamic optimization," "thermodynamic design," and "finite time thermodynamics" - are thoroughly discussed, and the me
Download or read book Convection in Porous Media written by D.A. Nield and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book we have tried to provide a user-friendly introduction to the topic of convection in porous media. We have assumed that the reader is conversant with the basic elements of fluid mechanics and heat transfer, but otherwise the book is self-contained. Only routine classical mathematics is employed. We hope that the book will be useful both as a review (for reference) and as a tutorial work (suitable as a textbook in a graduate course or seminar). This book brings into perspective the voluminous research that has been performed during the last two decades. The field has recently exploded because of worldwide concern with issues such as energy self-sufficiency and pollution of the environment. Areas of application include the insulation of buildings and equipment, energy storage and recovery, geothermal reservoirs, nuclear waste disposal, chemical reactor engineering, and the storage of heat-generating materials such as grain and coal. Geophysical applications range from the flow of groundwater around hot intrusions to the stability of snow against avalanches.
