Download or read book Thermomechanical Processing of High Strength Low Alloy Steels written by Imao Tamura and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermomechanical Processing of High-Strength Low-Alloy Steels considers some advanced techniques and metallurgical bases for controlled-rolling. This book contains 12 chapters. In Chapter 1, the purpose of thermomechanical processing and historical survey is described, while in Chapter 2, the kinetics of phase transformations and refinement of grain size in steels are elaborated. The techniques and metallurgical bases for controlled-rolling in the recrystallization, non-recrystallization, and (? + y) regions are reviewed in Chapters 3 to 5. Chapters 6 and 7 discuss the deformation resistance during hot-rolling and restoration processes. The phase transformations during cooling following hot-rolling are mentioned in Chapter 8, followed by a summarization of the effects of alloying elements in Chapter 9. Chapters 10 and 11 deal with the mechanical properties of controlled-rolled steel and prediction and control of microstructure and properties by thermomechanical processes. The problems faced and possibilities for future developments are stated in the last chapter. This publication is recommended for physicists, metallurgists, and researchers concerned with controlled-rolling, including non-specialists who have some knowledge of metallurgy.
Download or read book Thermomechanical Processing of Steels written by Jose M. Rodriguez-Ibabe and published by MDPI. This book was released on 2020-11-18 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a collection of papers summarizing some of the latest developments in the thermomechanical processing of steels. The replacement of conventional rolling plus post-rolling heat treatments by integrated controlled forming and cooling strategies implies important reductions in energy consumption, increases in productivity and more compact facilities in the steel industry. The metallurgical challenges that this integration implies, though, are relevant and impressive developments that have been achieved over the last 40 years. The frequency of the development of new steel grades and processing technologies devoted to thermomechanically processed products is increasing, and their implementation is being expended to higher value added products and applications. In addition to the metallurgical peculiarities and relationships between chemical composition, process and final properties, the relevance impact of advanced characterization techniques and innovative modelling strategies provides new tools to achieve the further deployment of the TMCP technologies. The contents of the book cover low carbon microalloyed grades, ferritic stainless steels and Fe–Al–Cr alloys, medium-Mn steels, and medium carbon grades. Authors of the chapters of this "Thermomechanical Processing of Steels" book represent some of the most relevant research groups from both the steel industry and academia.
Download or read book Thermo Mechanical Processing of Metallic Materials written by Bert Verlinden and published by Elsevier. This book was released on 2007-06-07 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-Mechanical Processing of Metallic Materials describes the science and technology behind modern thermo-mechanical processing (TMP), including detailed descriptions of successful examples of its application in the industry. This graduate-level introductory resource aims to fill the gap between two scientific approaches and illustrate their successful linkage by the use of suitable modern case studies. The book is divided into three key sections focusing on the basics of metallic materials processing. The first section covers the microstructural science base of the subject, including the microstructure determined mechanical properties of metals. The second section deals with the current mechanical technology of plastic forming of metals. The concluding section demonstrates the interaction of the first two disciplines in a series of case studies of successful current TMP processing and looks ahead to possible new developments in the field. This text is designed for use by graduate students coming into the field, for a graduate course textbook, and for Materials and Mechanical Engineers working in this area in the industry. * Covers both physical metallurgy and metals processing * Links basic science to real everyday applications * Written by four internationally-known experts in the field
Download or read book Thermomechanical Processing of High strength Low alloy Steels written by Imao Tamura and published by . This book was released on 2000 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermomechanical Processing of Steels written by José María Rodríguez-Ibabe and published by . This book was released on 2020 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a collection of papers summarizing some of the latest developments in the thermomechanical processing of steels. The replacement of conventional rolling plus post-rolling heat treatments by integrated controlled forming and cooling strategies implies important reductions in energy consumption, increases in productivity and more compact facilities in the steel industry. The metallurgical challenges that this integration implies, though, are relevant and impressive developments that have been achieved over the last 40 years. The frequency of the development of new steel grades and processing technologies devoted to thermomechanically processed products is increasing, and their implementation is being expended to higher value added products and applications. In addition to the metallurgical peculiarities and relationships between chemical composition, process and final properties, the relevance impact of advanced characterization techniques and innovative modelling strategies provides new tools to achieve the further deployment of the TMCP technologies. The contents of the book cover low carbon microalloyed grades, ferritic stainless steels and Fe-Al-Cr alloys, medium-Mn steels, and medium carbon grades. Authors of the chapters of this "Thermomechanical Processing of Steels" book represent some of the most relevant research groups from both the steel industry and academia.
Download or read book Advanced High Strength Steels written by Mahmoud Y. Demeri and published by ASM International. This book was released on 2013-08-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the types, microstructures and attributes of AHSSAlso reviews the current and future applications, the benefits, trends and environmental and sustainability issues.
Download or read book Thermomechanical Processing in Theory Modelling and Practice TMP 2 written by Bevis Hutchinson and published by ASM International(OH). This book was released on 1997 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgy and Design of Alloys with Hierarchical Microstructures written by Krishnan K. Sankaran and published by Elsevier. This book was released on 2017-06-14 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. Discusses the science behind the properties and performance of advanced metallic materials Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work
Download or read book Steels written by Robert William Kerr Honeycombe and published by John Wiley & Sons. This book was released on 1996-02-12 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The properties of steels depend critically on their microstructure. By examining the mechanical properties of steels in conjunction with microstructure, the first edition gave a clear description of the development and behavior of these materials - the very foundation of their widespread use. This new edition more explicitly links this theory with applications while retaining the style and purpose of its predecessor.
Download or read book Heat Treatment and Properties of Iron and Steel written by Samuel Jacob Rosenberg and published by . This book was released on 1966 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Theory of Thermomechanical Processes in Welding written by Andrzej Sluzalec and published by Springer Science & Business Media. This book was released on 2005-12-05 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main purpose of this book is to provide a unified and systematic continuum approach to engineers and applied physicists working on models of deformable welding material. The key concept is to consider the welding material as an thennodynamic system. Significant achievements include thermodynamics, plasticity, fluid flow and numerical methods. Having chosen point of view, this work does not intend to reunite all the information on the welding thermomechanics. The attention is focused on the deformation of welding material and its coupling with thermal effects. Welding is the process where the interrelation of temperature and deformation appears throughout the influence of thermal field on material properties and modification of the extent of plastic zones. Thermal effects can be studied with coupled or uncoupled theories of thermomechanical response. A majority of welding problems can be satisfactorily studied within an uncoupled theory. In such an approach the temperature enters the stress-strain relation through the thennal dilatation and influences the material constants. The heat conduction equation and the relations governing the stress field are considered separately. In welding a material is either in solid or in solid and liquid states. The flow of metal and solidification phenomena make the welding process very complex. The automobile, aircraft, nuclear and ship industries are experiencing a rapidly-growing need for tools to handle welding problems. The effective solutions of complex problems in welding became possible in the last two decades, because of the vigorous development of numerical methods for thermal and mechanical analysis.
Download or read book Steel Heat Treatment written by George E. Totten and published by CRC Press. This book was released on 2006-09-28 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of two self-contained volumes belonging to the newly revised Steel Heat Treatment Handbook, Second Edition, this book examines the behavior and processes involved in modern steel heat treatment applications. Steel Heat Treatment: Metallurgy and Technologies presents the principles that form the basis of heat treatment processes while incorporating detailed descriptions of advances emerging since the 1997 publication of the first edition. Revised, updated, and expanded, this book ensures up-to-date and thorough discussions of how specific heat treatment processes and different alloy elements affect the structure and the classification and mechanisms of steel transformation, distortion of properties of steel alloys. The book includes entirely new chapters on heat-treated components, and the treatment of tool steels, stainless steels, and powder metallurgy steel components. Steel Heat Treatment: Metallurgy and Technologies provides a focused resource for everyday use by advanced students and practitioners in metallurgy, process design, heat treatment, and mechanical and materials engineering.
Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Download or read book Process Modelling of Metal Forming and Thermomechanical Treatment written by Claudio R. Boer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is the objective of the series IIMaterials Research and Engineeringll to publish information on technical facts and pro cesses together with specific scientific models and theories. Fundamental considerations assist in the recognition of the origin of properties and the roots of processes. By providing a higher level of understanding, such considerations form the basis for further improving the quality of both traditional and future engineering materials, as well as the efficiency of industrial operations. In a more general sense, theory helps to integrate facts into a framework which ties relations between physical equilibria and mechanisms on the one hand, product development and econo mical competition on the other. Aspects of environmental compati bili ty, conservation of resources and of socio-cul tural inter action form the final horizon - a subject treated in the first ll volume of this series, IIMaterials in World Perspective . The four authors of the present book endeavor to present a comprehensive picture of process modelling in the important field of metal forming and thermomechanical treatment. The reader will be introduced to the rapidly-growing new field of application of computer-aided numerical methods to the quanti tative simulation of complex technical processes. Extensive use is made of the state of scientific knowledge related to materials behavior under mechanical stress and thermal treat ment.
Download or read book Physical Metallurgy of High Manganese Steels written by Wolfgang Bleck and published by MDPI. This book was released on 2019-12-06 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue ‘Physical Metallurgy of High Manganese Steels’ addresses the highly fascinating class of manganese-alloyed steels with manganese contents well above 3 mass%. The book gathers manuscripts from internationally recognized researchers with stimulating new ideas and original results. It consists of fifteen original research papers. Seven contributions focus on steels with manganese contents above 12 mass%. These contributions cover fundamental aspects of process-microstrcuture-properties relationships with processes ranging from cold and warm rolling over deep rolling to heat treatment. Novel findings regarding the fatigue and fracture behavior, deformation mechanisms, and computer-aided design are presented. Additionally, the Special Issue also reflects the current trend of reduced Mn content (3-12 mass%) in advanced high strength steels (AHSS). Eight contributions were dedicated to these alloys, which are often referred to as 3rd generation AHSS, medium manganese steels or quenching and partitioning (Q&P/Q+P) steels. The interplay between advanced processing, mainly novel annealing variants, and microstructure evolution has been addressed using computational and experimental approaches. A deeper understanding of strain-rate sensitivity, hydrogen embrittlement, phase transformations, and the consequences for the materials’ properties has been developed. Hence, the topics included are manifold, fundamental-science oriented and, at the same time, relevant to industrial application.
Download or read book Thermomechanical processing of steels written by Associazione italiana di Metallurgia and published by . This book was released on 2008 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt:
