Download or read book Thermoforming written by Stanley R. Rosen and published by . This book was released on 2000 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermoforming Improving Process Performance written by Stanley R. Rosen and published by Society of Manufacturing Engineers. This book was released on 2002 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoforming is a processing technique involving air pressure applied to heated plastic, and combines the earlier terminology of vacuum-formed and pressure-formed operations. A specialist in thermoforming, mechanical engineer Rosen describes the roll-fed process, properties of plastic materials, designing products, thermoforming machines, trim presses, knife-like trim dies, and off-line punch-and-die trimming. Chapters on molds cover mold design, system components, layout and base design, and cost estimating. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Fundamentals of Plastics Thermoforming written by Peter Klein and published by Springer Nature. This book was released on 2022-06-01 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of heating and reshaping plastics sheet and film materials has been in use since the beginning of the plastics industry. This process is known as thermoforming. Today this process is used for industrial products including signage, housings, and hot tubs. It also produces much of the packaging in use today including blister packs, egg cartons, and food storage containers. This process has many advantages over other methods of producing these products, but it has some limitations. This book has a twofold purpose. It is designed to be used as a text book for a course on thermoforming. It is also intended to be an application guide for professionals in the field of thermoforming including manufacturing, process and quality engineers, and managers. This book is focused on process application rather than theory. It refers to real products and processes with the intent of understanding the real issues faced in this industry. In addition to materials and processes, part and tool design are covered. Quality control is critical to any operation and this is also covered in this text. Two areas of focus in today's industry include Lean operations and environmental issues. Both of these topics are also included. Table of Contents: Introduction / Plastics Materials / Thermoforming Process Overview / The Forming Process / Part Design Mold / Tool Design / Quality Control Issues / Lean Operations / Environmental Issues
Download or read book Thermoforming of Single and Multilayer Laminates written by Syed Ali Ashter and published by William Andrew. This book was released on 2013-11-07 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoforming of Single and Multilayer Laminates explains the fundamentals of lamination and plastics thermoforming technologies along with current and new developments. It focuses on properties and thermoforming mechanics of plastic films and in particular single and multilayered laminates, including barrier films. For environmental and economic reasons, laminates are becoming increasingly important as a replacement for solid sheets and paint finishes in many industries, including transportation, packaging, and construction. Yet the processes of film formability during the extensive deformation and elevated temperatures experienced in conventional processing technologies, such as thermoforming, are poorly understood by most engineers. This book covers production processes, such as extrusion, calendaring, and casting, as well as mechanical and impact testing methods. It also describes how testing protocols developed for metals can be leveraged for plastic films and laminates, and includes a thorough discussion on methods for performing optical strain analysis. Applications in transportation vehicles and packaging, including packaging for food, medical and electronics applications, sports equipment, and household appliances, are discussed. Safety, recycling and environmental aspects of thermoforming and its products complete the book. First comprehensive source of information and hands-on guide for the thermoforming of multilayered laminates Covers applications across such sectors as automotive, packaging, home goods, and construction Introduces new testing methods leveraging protocols used for metals
Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2016-09-15 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Materials, and Applications, Second Edition, covers both the polymer basics that are helpful to bring readers quickly up-to-speed if they are not familiar with a particular area of plastics processing and the recent developments that enable practitioners to discover which options best fit their requirements. New chapters added specifically cover polyamides, polyimides, and polyesters. Hot topics such as 3-D printing and smart plastics are also included, giving plastics engineers the information they need to take these embryonic technologies and deploy them in their own work. With the increasing demands for lightness and fuel economy in the automotive industry (not least due to CAFÉ standards), plastics will soon be used even further in vehicles. A new chapter has been added to cover the technology trends in this area, and the book has been substantially updated to reflect advancements in technology, regulations, and the commercialization of plastics in various areas. Recycling of plastics has been thoroughly revised to reflect ongoing developments in sustainability of plastics. Extrusion processing is constantly progressing, as have the elastomeric materials, fillers, and additives which are available. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. Presents an authoritative source of practical advice for engineers, providing guidance from experts that will lead to cost savings and process improvements Ideal introduction for both new engineers and experienced practitioners entering a new field or evaluating a new technology Updated to include the latest technology, including 3D Printing, smart polymers, and thorough coverage of biopolymers and biodegradable plastics
Download or read book Insights and Innovations in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2016-11-25 with total page 4442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insights and Innovations in Structural Engineering, Mechanics and Computation comprises 360 papers that were presented at the Sixth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2016, Cape Town, South Africa, 5-7 September 2016). The papers reflect the broad scope of the SEMC conferences, and cover a wide range of engineering structures (buildings, bridges, towers, roofs, foundations, offshore structures, tunnels, dams, vessels, vehicles and machinery) and engineering materials (steel, aluminium, concrete, masonry, timber, glass, polymers, composites, laminates, smart materials). Some contributions present the latest insights and new understanding on (i) the mechanics of structures and systems (dynamics, vibration, seismic response, instability, buckling, soil-structure interaction), and (ii) the mechanics of materials and fluids (elasticity, plasticity, fluid-structure interaction, flow through porous media, biomechanics, fracture, fatigue, bond, creep, shrinkage). Other contributions report on (iii) recent advances in computational modelling and testing (numerical simulations, finite-element modeling, experimental testing), and (iv) developments and innovations in structural engineering (planning, analysis, design, construction, assembly, maintenance, repair and retrofitting of structures). Insights and Innovations in Structural Engineering, Mechanics and Computation is particularly of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find the content useful. Short versions of the papers, intended to be concise but self-contained summaries of the full papers, are collected in the book, while the full versions of the papers are on the accompanying CD.
Download or read book Handbook of Industrial Polyethylene and Technology written by Mark A. Spalding and published by John Wiley & Sons. This book was released on 2017-10-12 with total page 1410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an exhaustive description of polyethylene. The 50+ chapters are written by some of the most experienced and prominent authors in the field, providing a truly unique view of polyethylene. The book starts with a historical discussion on how low density polyethylene was discovered and how it provided unique opportunities in the early days. New catalysts are presented and show how they created an expansion in available products including linear low density polyethylene, high density polyethylene, copolymers, and polyethylene produced from metallocene catalysts. With these different catalysts systems a wide range of structures are possible with an equally wide range of physical properties. Numerous types of additives are presented that include additives for the protection of the resin from the environment and processing, fillers, processing aids, anti-fogging agents, pigments, and flame retardants. Common processing methods including extrusion, blown film, cast film, injection molding, and thermoforming are presented along with some of the more specialized processing techniques such as rotational molding, fiber processing, pipe extrusion, reactive extrusion, wire and cable, and foaming processes. The business of polyethylene including markets, world capacity, and future prospects are detailed. This handbook provides the most current and complete technology assessments and business practices for polyethylene resins.
Download or read book Plastics Engineering written by Russell J. Crawford and published by Butterworth-Heinemann. This book was released on 2020-01-22 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Engineering, Fourth Edition, presents basic essentials on the properties and processing behaviour of plastics and composites. The book gives engineers and technologists a sound understanding of basic principles without the introduction of unduly complex levels of mathematics or chemistry. Early chapters discuss the types of plastics currently available and describe how designers select a plastic for a particular application. Later chapters guide the reader through the mechanical behaviour of materials, along with a detailed analysis of their major processing techniques and principles. All techniques are illustrated with numerous worked examples within each chapter, with further problems provided at the end. This updated edition has been thoroughly revised to reflect major changes in plastic materials and their processing techniques that have occurred since the previous edition. The plastics and processing techniques addressed within the book have been comprehensively updated to reflect current materials and technologies, with new worked examples and problems also included. Gives new engineers and technologists a thorough understanding of the essential properties and processing behavior of plastics and composites Presents a great source of foundational information for students, early-career engineers and researchers Demonstrates how basic engineering principles in design, mechanics of materials, fluid mechanics and thermodynamics may be applied to the properties, processing and performance of modern plastic materials
Download or read book Reinforced Plastics Handbook written by Donald V Rosato and published by Elsevier. This book was released on 2004-12-15 with total page 1082 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this 3rd Edition of the Reinforced Plastics Handbook the authors have continued the approach of the late John Murphy, author of the first and second editions.The book provides a compendium of information on every aspect of materials, processes, designs and construction.Fiber-reinforced plastics are a class of materials in which the basic properties of plastics are given mechanical reinforcement by the addition of fibrous materials. The wide choice of plastics resin matrices and the correspondingly wide choice of reinforcing materials mean that the permutations are virtually unlimited. But the optimum properties of resin and reinforcement cannot be obtained unless there is an effective bond between the two, and this is the continuing objective of reinforced plastics production, design and processing. · New 3rd edition of this comprehensive practical manual · This is a 'bible' for all those involved in the reinforced plastics industry, whether manufacturers, specifiers, designers or end-users. · Has been completely revised and updated to reflect all the latest developments in the industry
Download or read book DeGarmo s Materials and Processes in Manufacturing written by J. T. Black and published by John Wiley & Sons. This book was released on 2011-08-30 with total page 1298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its eleventh edition, DeGarmo's Materials and Processes in Manufacturing has been a market-leading text on manufacturing and manufacturing processes courses for more than fifty years. Authors J T. Black and Ron Kohser have continued this book's long and distinguished tradition of exceedingly clear presentation and highly practical approach to materials and processes, presenting mathematical models and analytical equations only when they enhance the basic understanding of the material. Completely revised and updated to reflect all current practices, standards, and materials, the eleventh edition has new coverage of additive manufacturing, lean engineering, and processes related to ceramics, polymers, and plastics.
Download or read book Handbook of Plastic Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: An outstanding and thorough presentation of the complete field of plastics processing Handbook of Plastic Processes is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. The authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. Coverage includes chapters on: Injection molding Compression and transfer molding Sheet extrusion Blow molding Calendering Foam processing Reinforced plastics processing Liquid resin processing Rotational molding Thermoforming Reaction injection molding Compounding, mixing, and blending Machining and mechanical fabrication Assembly, finishing, and decorating Each chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. Because of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.
Download or read book Flexible Forming for Fluid Architecture written by Arno Pronk and published by Springer Nature. This book was released on 2021-10-11 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on flexible formwork for fluid architecture is a multi-faceted research that covers a broad field: from design to material and technology, and from history to future developments. It offers a pragmatic approach that can be extended with more cases, materials, techniques and methods for fluid architecture, and provides a better understanding of the main aspects of fluid architecture and to help them find the most suitable combinations of all aspects. The book is a challenging experience with many new discoveries, including two patents: one on moulding of fluid surfaces and one on 3D printing of fibre–reinforced ice. It also features two world records: the larges span (30 meters) and the highest thin shell structure (30,5 meters) in ice as well as a method for the construction of a fully laminated shell structure in insulated glass.
Download or read book Plastics Engineered Product Design written by D.V. Rosato and published by Elsevier. This book was released on 2003-12-16 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: • A comprehensive book which collates the experience of two well-known US plastic engineers.• Enables engineers to make informed decisions.• Includes a unique chronology of the world of plastics. The use of plastics is increasing year on year, and new uses are being found for plastics in many industries. Designers using plastics need to understand the nature and properties of the materials which they are using so that the products perform to set standards. This book, written by two very experienced plastics engineers, provides copious information on the materials, fabrication processes, design considerations and plastics performance, thus allowing informed decisions to be made by engineers. It also includes a useful chronology of the world of plastics, a resource not found elsewhere.
Download or read book Thermoforming written by Muralisrinivasan Natamai Subramanian and published by John Wiley & Sons. This book was released on 2024-06-21 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive reference manual that contains essential information on thermoforming processing and technology. The field of thermoforming is experiencing rapid development driven by commercial factors; millions of tons of polymers are manufactured for use in various applications, both as commodity and specialty polymers. Building on the previous edition published about ten years ago, this edition includes new, as well as, fully revised chapters and updated information on materials and processes. The book is designed to provide practitioners with essential information on processing and technology in a concise manner. The book caters to both engineers and experts by providing introductory aspects, background information, and an overview of thermoforming processing and technology. The troubleshooting section includes flowcharts to assist in correcting thermoforming processes. p”emThermoforming: Processing and Technology offers a complete account of thermoplastics, covering properties and forming, with chapters providing perspective on the technologies involved. Readers will find it: serves as a handy knowledge source for professionals who occasionally work on thermoforming projects or need to refresh their knowledge; offers a troubleshooting guide that can help to identify and solve challenges that may arise in thermoforming processes; provides insights into process optimization, helping businesses improve efficiency, reduce waste, and enhance the quality of thermoformed products; acts as a course book to inform students about the thermoforming process. Audience The book will be of interest to mechanical, materials engineers, and process engineers who are involved in designing and optimizing thermoforming processes; professionals in the manufacturing and production industries who use thermoforming as a manufacturing method, such as in the production of plastic packaging, automotive components, and consumer goods; scientists, researchers, and students in plastics/polymer engineering and technology, materials science, polymer technology; professionals responsible for ensuring product quality and compliance with industry standards.
Download or read book Chemical Engineering and Chemical Process Technology Volume VII written by Ryzhard Pohorecki and published by EOLSS Publications. This book was released on 2010-11-30 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering and Chemical Process Technology is a theme component of Encyclopedia of Chemical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. Chemical engineering is a branch of engineering, dealing with processes in which materials undergo changes in their physical or chemical state. These changes may concern size, energy content, composition and/or other application properties. Chemical engineering deals with many processes belonging to chemical industry or related industries (petrochemical, metallurgical, food, pharmaceutical, fine chemicals, coatings and colors, renewable raw materials, biotechnological, etc.), and finds application in manufacturing of such products as acids, alkalis, salts, fuels, fertilizers, crop protection agents, ceramics, glass, paper, colors, dyestuffs, plastics, cosmetics, vitamins and many others. It also plays significant role in environmental protection, biotechnology, nanotechnology, energy production and sustainable economical development. The Theme on Chemical Engineering and Chemical Process Technology deals, in five volumes and covers several topics such as: Fundamentals of Chemical Engineering; Unit Operations – Fluids; Unit Operations – Solids; Chemical Reaction Engineering; Process Development, Modeling, Optimization and Control; Process Management; The Future of Chemical Engineering; Chemical Engineering Education; Main Products, which are then expanded into multiple subtopics, each as a chapter. These five volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Fundamentals of Plastics Thermoforming written by Peter Klein and published by Morgan & Claypool Publishers. This book was released on 2009 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of heating and reshaping plastics sheet and film materials has been in use since the beginning of the plastics industry. This process is known as thermoforming. Today this process is used for industrial products including signage, housings, and hot tubs. It also produces much of the packaging in use today including blister packs, egg cartons, and food storage containers. This process has many advantages over other methods of producing these products, but it has some limitations. This book has a twofold purpose. It is designed to be used as a text book for a course on thermoforming. It is also intended to be an application guide for professionals in the field of thermoforming including manufacturing, process and quality engineers, and managers. This book is focused on process application rather than theory. It refers to real products and processes with the intent of understanding the real issues faced in this industry. In addition to materials and processes, part and tool design are covered. Quality control is critical to any operation and this is also covered in this text. Two areas of focus in today's industry include Lean operations and environmental issues. Both of these topics are also included. Table of Contents: Introduction / Plastics Materials / Thermoforming Process Overview / The Forming Process / Part Design Mold / Tool Design / Quality Control Issues / Lean Operations / Environmental Issues
Download or read book Advances in Polymer Processing written by S Thomas and published by Elsevier. This book was released on 2009-05-30 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Processing techniques are critical to the performance of polymer products which are used in a wide range of industries. Advances in polymer processing: From macro- to nano- scales reviews the latest advances in polymer processing, techniques and materials. Part one reviews the fundamentals of polymer processing with chapters on rheology, materials and polymer extrusion. Part two then discusses advances in moulding technology with chapters on such topics as compression, rotational and blow moulding of polymers. Chapters in Part three review alternative processing technologies such as calendaring and coating, foam processing and radiation processing of polymers. Part four discusses micro and nano-technologies with coverage of themes such as processing of macro, micro and nanocomposites and processing of carbon nanotubes. The final section of the book addresses post-processing technologies with chapters on online monitoring and computer modelling as well as joining, machining, finishing and decorating of polymers. With is distinguished editors and team of international contributors, Advances in polymer processing: From macro- to nano- scales is an invaluable reference for engineers and academics concerned with polymer processing. Reviews the latest advances in polymer processing, techniques and materials analysing new challenges and opportunities Discusses the fundamentals of polymer processing considering the compounding and mixing of polymers as well as extrusion Assesses alternative processing technologies including calendaring and coating and thermoforming of polymers
