Download or read book The Physics of Thermoelectric Energy Conversion written by Julian Goldsmid and published by Morgan & Claypool Publishers. This book was released on 2017-05-02 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines the principles of thermoelectric generation and refrigeration from the discovery of the Seebeck and Peltier effects in the nineteenth century through the introduction of semiconductor thermoelements in the mid-twentieth century to the more recent development of nanostructured materials. It is shown that the efficiency of a thermoelectric generator and the coefficient of performance of a thermoelectric refrigerator can be related to a quantity known as the figure of merit. The figure of merit depends on the Seebeck coefficient and the ratio of the electrical to thermal conductivity. It is shown that expressions for these parameters can be derived from the band theory of solids. The conditions for favourable electronic properties are discussed. The methods for selecting materials with a low lattice thermal conductivity are outlined and the ways in which the scattering of phonons can be enhanced are described. The application of these principles is demonstrated for specific materials including the bismuth telluride alloys, bismuth antimony, alloys based on lead telluride, silicon-germanium and materials described as phonon-glass electron-crystals. It is shown that there can be advantages in using the less familiar transverse thermoelectric effects and the transverse thermomagnetic effects. Finally, practical aspects of thermoelectric generation and refrigeration are discussed. The book is aimed at readers who do not have a specialised knowledge of solid state physics.
Download or read book Thermoelectric Refrigeration written by H. Goldsmid and published by Springer. This book was released on 2013-12-14 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermoelectric Cooling written by Robert Hansen Bevan and published by . This book was released on 1965 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CRC Handbook of Thermoelectrics written by D.M. Rowe and published by CRC Press. This book was released on 2018-12-07 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoelectrics is the science and technology associated with thermoelectric converters, that is, the generation of electrical power by the Seebeck effect and refrigeration by the Peltier effect. Thermoelectric generators are being used in increasing numbers to provide electrical power in medical, military, and deep space applications where combinations of their desirable properties outweigh their relatively high cost and low generating efficiency. In recent years there also has been an increase in the requirement for thermoelectric coolers (Peltier devices) for use in infrared detectors and in optical communications. Information on thermoelectrics is not readily available as it is widely scattered throughout the literature. The Handbook centralizes this information in a convenient format under a single cover. Sixty of the world's foremost authorities on thermoelectrics have contributed to this Handbook. It is comprised of fifty-five chapters, a number of which contain previously unpublished material. The contents are arranged in eight sections: general principles and theoretical considerations, material preparation, measurement of thermoelectric properties, thermoelectric materials, thermoelectric generation, generator applications, thermoelectric refrigeration, and applications of thermoelectric cooling. The CRC Handbook of Thermoelectrics has a broad-based scope. It will interest researchers, technologists, and manufacturers, as well as students and the well-informed, non-specialist reader.
Download or read book Bringing Thermoelectricity into Reality written by Patricia Aranguren and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The disproportionate use of fossil fuels has turned into a serious environmental issue. Thus, we are encountering one of the biggest challenges of the twenty-first century, satisfying the energy demand with respect to the environment. Thermoelectricity is an emerging technology, which contributes to reducing the impact of the use of traditional technologies, harvesting the waste heat, and eliminating the use of refrigerants. The book Bringing Thermoelectricity into Reality covers the current thermoelectric investigations: the study of novel thermoelectric materials, the development of computational models, the design of proper assemblies, and the optimization of thermal designs, as well as novel thermoelectric generators, coolers, and heating applications. This book looks for the definitive thermoelectric applications applied to everyday life.
Download or read book Semiconductor Thermoelements and Thermoelectric Cooling written by Абрам Федорович Иоффе and published by . This book was released on 1957 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermoelectrics Handbook written by D.M. Rowe and published by CRC Press. This book was released on 2018-10-03 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten years ago, D.M. Rowe introduced the bestselling CRC Handbook of Thermoelectrics to wide acclaim. Since then, increasing environmental concerns, desire for long-life electrical power sources, and continued progress in miniaturization of electronics has led to a substantial increase in research activity involving thermoelectrics. Reflecting the latest trends and developments, the Thermoelectrics Handbook: Macro to Nano is an extension of the earlier work and covers the entire range of thermoelectrics disciplines. Serving as a convenient reference as well as a thorough introduction to thermoelectrics, this book includes contributions from 99 leading authorities from around the world. Its coverage spans from general principles and theoretical concepts to material preparation and measurements; thermoelectric materials; thermoelements, modules, and devices; and thermoelectric systems and applications. Reflecting the enormous impact of nanotechnology on the field-as the thermoelectric properties of nanostructured materials far surpass the performance of conventional materials-each section progresses systematically from macro-scale to micro/nano-scale topics. In addition, the book contains an appendix listing major manufacturers and suppliers of thermoelectric modules. There is no longer any need to spend hours plodding through the journal literature for information. The Thermoelectrics Handbook: Macro to Nano offers a timely, comprehensive treatment of all areas of thermoelectrics in a single, unified reference.
Download or read book Proceedings of the 2nd International Conference on Experimental and Computational Mechanics in Engineering written by Akhyar and published by Springer Nature. This book was released on 2021-05-31 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a selection of peer-reviewed papers presented at the 2nd International Conference on Experimental and Computational Mechanics in Engineering (ICECME 2020), held as a virtual conference and organized by Universitas Syiah Kuala, Banda Aceh, Indonesia, on 13–14 October 2020. The contributions, prepared by international scientists and engineers, cover the latest advances in computational mechanics, metallurgy and material science, energy systems, manufacturing processing systems, industrial and system engineering, biomechanics, artificial intelligence, micro/nano-engineering, micro-electro-mechanical system, machine learning, mechatronics, and engineering design. The book is intended for academics, including graduate students and researchers, as well as industrial practitioners working in the areas of experimental and computational mechanics.
Download or read book Encyclopedia Of Thermal Packaging Set 1 Thermal Packaging Techniques A 6 volume Set written by and published by World Scientific. This book was released on 2012-09-25 with total page 1582 pages. Available in PDF, EPUB and Kindle. Book excerpt: remove This Encyclopedia comes in 3 sets. To check out Set 2 and Set 3, please visit Set 2: Thermal Packaging Tools and Set 3: Thermal Packaging Applications /remove Thermal and mechanical packaging — the enabling technologies for the physical implementation of electronic systems - are responsible for much of the progress in miniaturization, reliability, and functional density achieved by electronic, microelectronic, and nanoelectronic products during the past 50 years. The inherent inefficiency of electronic devices and their sensitivity to heat have placed thermal packaging on the critical path of nearly every product development effort in traditional, as well as emerging, electronic product categories.Successful thermal packaging is the key differentiator in electronic products, as diverse as supercomputers and cell phones, and continues to be of pivotal importance in the refinement of traditional products and in the development of products for new applications. The Encyclopedia of Thermal Packaging, compiled in multi-volume sets (Set 1: Thermal Packaging Techniques, Set 2: Thermal Packaging Tools, Set 3: Thermal Packaging Applications, and Set 4: Thermal Packaging Configurations) will provide a comprehensive, one-stop treatment of the techniques, tools, applications, and configurations of electronic thermal packaging. Each of the author-written sets presents the accumulated wisdom and shared perspectives of a few luminaries in the thermal management of electronics.Set 1: Thermal Packaging TechniquesThe first set of the Encyclopedia, Thermal Packaging Techniques, focuses on the technology “building blocks” used to assemble a complete thermal management system and provide detailed descriptions of the underlying phenomena, modeling equations, and correlations, as well as guidance for achieving the optimal designs of individual “building blocks” and their insertion in the overall thermal solution. Specific volumes deal with microchannel coolers, cold plates, immersion cooling modules, thermoelectric microcoolers, and cooling devices for solid state lighting systems, as well as techniques and procedures for the experimental characterization of thermal management components. These “building blocks” are the essential elements in the creation of a complete, cost-effective thermal management system.The four sets in the Encyclopedia of Thermal Packaging will provide the novice and student with a complete reference for a quick ascent on the thermal packaging ';learning curve,'; the practitioner with a validated set of techniques and tools to face every challenge, and researchers with a clear definition of the state-of-the-art and emerging needs to guide their future efforts. This encyclopedia will, thus, be of great interest to packaging engineers, electronic product development engineers, and product managers, as well as to researchers in thermal management of electronic and photonic components and systems, and most beneficial to undergraduate and graduate students studying mechanical, electrical, and electronic engineering.
Download or read book Advanced Packaging written by and published by . This book was released on 2008-07 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Packaging serves the semiconductor packaging, assembly and test industry. Strategically focused on emerging and leading-edge methods for manufacturing and use of advanced packages.
Download or read book Encyclopedia of Thermal Packaging Set 1 Thermal Packaging Techniques a 6 Volume Set written by Avram Bar-Cohen and published by World Scientific. This book was released on 2012-02-01 with total page 1582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packaging, the physical design and implementation of electronic systems is responsible for much of the progress in miniaturization, reliability and functional density achieved by the full range of electronic, microelectronic and nanoelectronic products during the past several decades. The inherent inefficiency of electronic devices and their sensitivity to heat have placed thermal management on the critical path of nearly every organization dealing with traditional electronic product development, as well as emerging, product categories. Successful thermal packaging is the key differentiator in electronic products, as diverse as supercomputers and cell phones, and continues to be of critical importance in the refinement of traditional products and in the development of products for new applications.The Encyclopedia of Thermal Packaging, compiled into four 5-volume sets (Thermal Packaging Techniques, Thermal Packaging Configurations, Thermal Packaging Tools and Thermal Packaging Applications), will provide comprehensive, one-stop treatment of the techniques, configurations, tools and applications of electronic thermal packaging. Each volume in a set comprises 250–350 pages and is written by world experts in thermal management of electronics.
Download or read book ICREEC 2019 written by Ahmed Belasri and published by Springer Nature. This book was released on 2020-06-10 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights peer reviewed articles from the 1st International Conference on Renewable Energy and Energy Conversion, ICREEC 2019, held at Oran in Algeria. It presents recent advances, brings together researchers and professionals in the area and presents a platform to exchange ideas and establish opportunities for a sustainable future. Topics covered in this proceedings, but not limited to, are photovoltaic systems, bioenergy, laser and plasma technology, fluid and flow for energy, software for energy and impact of energy on the environment.
Download or read book NASA Thesaurus written by and published by . This book was released on 1988 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1963 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Conference on Advances in Power Generation from Renewable Energy Sources APGRES 2020 written by Editor in Chief Dr. D. Dhalin Editor Dr. Veeresh Fuskele Dr. Shiv Lal Dr. B. L. Gupta and published by Nitya Publications. This book was released on 2020-03-04 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Advances in Power Generation from Renewable Energy Sources (APGRES-2020)
Download or read book 3D Printing of Metals written by Manoj Gupta and published by MDPI. This book was released on 2019-08-13 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing is rapidly emerging as a key manufacturing technique that is capable of serving a wide spectrum of applications, ranging from engineering to biomedical sectors. Its ability to form both simple and intricate shapes through computer-controlled graphics enables it to create a niche in the manufacturing sector. Key challenges remain, and a great deal of research is required to develop 3D printing technology for all classes of materials including polymers, metals, ceramics, and composites. In view of the growing importance of 3D manufacturing worldwide, this Special Issue aims to seek original articles to further assist in the development of this promising technology from both scientific and technological perspectives. Targeted reviews, including mini-reviews, are also welcome, as they play a crucial role in educating students and young researchers.
Download or read book Renewable Energy and its Innovative Technologies written by Jayeeta Chattopadhyay and published by Springer. This book was released on 2018-10-10 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book features innovative scientific research by scientists, academicians and students, presented at the International Conference on Energy, Materials and Information Technology, 2017 at Amity University Jharkhand, India. Covering all the promising renewable energies and their related technologies, such as wind, solar and biomass energy, it compiles current important scientific research in this field and addresses how it can be applied in an interdisciplinary manner. The selected conference papers provide important data and parameters for utilizing the main potential renewable energies, and allowing an economic and environmental assessment. The book is a valuable resource for all those who are interested in the physical and technical principles of promising ways to utilize various renewable energies.
