Download or read book Physical Properties of Polymers written by James E. Mark and published by . This book was released on 1993 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents have been divided into sections on physical states of polymers and characterization techniques. Chapters on physical states include discussions of the rubber elastic state, the glassy state, melts and concentrated solutions, the crystalline state, and the mesomorphic state. Characterization techniques described are molecular spectroscopy and scattering techniques.
Download or read book Thermo oxidative Degradation of Polymers written by Thomas Roy Crompton and published by Smithers Rapra Technology. This book was released on 2010 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: The oxidative and thermal degradation of polymers has very important implications on their suitability for particular end-user applications. Particularly in relation to their physical properties and the lifetime over which the manufactured article retains these properties, after which they become unsuitable for purpose. Particular applications which come to mind are critical applications of polymers to the manufacture of electronic components and the design of polymeric alloys for aircraft fuselage assembly which retain their properties for many years over which the alloy must retain the physical properties at high or low operating temperatures. A particular area of growing importance is the recycling of manufactured components for re-use. Here, the polymer must retain its thermo oxidative resistance properties over a number of remouldings. A wide and increasing range of types of polymers are being used in these critical applications and an understanding of thermo oxidative processes will be very important in developing new applications in the future. This book brings together information on the thermooxidative resistance of polymers to change during processing and end-use life. Our present understanding of the chemical changes of the polymer that accompany degradation are also reviewed and the analytical methods by which changes can be ascertained are also discussed. This book will be of interest to those involved in the investigation of polymer stability and studies of the mechanics of polymer degradation, to polymer manufacturers and those who use polymers to manufacture end-use articles. This book will also be of interest to those involved in the manufacture of stabilisers for oxidation resistance for use in polymer manufacture, mechanical engineers and designers of polymer products.
Download or read book Thermal Degradation of Polymeric Materials written by Krzysztof Pielichowski and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the thermal degradation of polymers is of paramount importance for developing a rational technology of polymer processing and higher-temperature applications. Controlling degradation requires understanding of many different phenomena, including chemical mechanisms, the influence of polymer morphology, the complexities of oxidation chemistry, and the effects of stabilisers, fillers and other additives. This book offers a wealth of information for polymer researchers and processors requiring an understanding of the implications of thermal degradation on material and product performance.
Download or read book Autoxidation of Hydrocarbons and Polyolefins written by Leo Reich and published by . This book was released on 1969 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Failure of Polymer Products Due to Thermo oxidation written by D. C. Wright and published by iSmithers Rapra Publishing. This book was released on 2001 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combined effects of oxidising media and heat result in degradation by thermo-oxidation. The principles and cases described in this review emphasise long term degradation in service. Two additional phenomena that influence thermo-oxidation are also described: catalysis by certain metal ions, and the influence of stress. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.
Download or read book Degradation and Stabilization of Polymers written by Hans Helmut Gunter Jellinek and published by Elsevier Publishing Company. This book was released on 1983 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Degradation of Polymers written by R.G. Compton and published by Elsevier. This book was released on 1975-01-01 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Degradation of Polymers
Download or read book Plastics Additives written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.
Download or read book The Thermo oxidative Degradation of Poly phenylene Oxide Polymers written by William M. Alvino and published by . This book was released on 1966 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Thermo oxidative Degradation of Phenolic Based Polymers Containing the Dibenzyl Ether Linkage written by Li Lee Chow and published by . This book was released on 1970 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elements of Polymer Degradation written by Leo Reich and published by . This book was released on 1971 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Resistant Polymers written by J.P. Critchley and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Definitions of what is meant by a heat-resistant polymer vary considerably. We have taken the term to mean a polymer which can be used, at least for short time periods, at temperatures from 150°C. The greatest problem which arises in writing a monograph on such materials is the tremendous amount of data that is available. More than 2000 references have been published on one heat-resistant polymer system alone over a period of little more than two years. The result is that a very high degree of selectivity must be exercised with respect to the information reproduced. We have chosen to restrict our coverage to polymers that have received at least some degree of commercial exploitation and to details of their methods of preparation, their thermal and thermo-oxidative stabilities and modes of degradation, and their properties at elevated temperatures. It must be emphasized that other properties not cited, e. g. , hydrolytic and chemical stability, and resistance to ultraviolet radiation, may be equally important in particular uses of these materials. The "older" heat-resistant polymers, e. g. , the thermosets and some of the fluorine-containing materials, are not dealt with in such depth as are the "newer" polymers with aromatic and/or heterocyclic rings in the chain. This is because books have been available for some time on the well-established commercial polymers and developments in them have not been as marked re cently as in the aromatic and heterocyclic macromolecules.
Download or read book Reactions and Mechanisms in Thermal Analysis of Advanced Materials written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2015-07-29 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strong bonds form stronger materials. For this reason, the investigation on thermal degradation of materials is a significantly important area in research and development activities. The analysis of thermal stability can be used to assess the behavior of materials in the aggressive environmental conditions, which in turn provides valuable information about the service life span of the materiel. Unlike other books published so far that have focused on either the fundamentals of thermal analysis or the degradation pattern of the materials, this book is specifically on the mechanism of degradation of materials. The mechanism of rapturing of chemical bonds as a result of exposure to high-temperature environment is difficult to study and resulting mechanistic pathway hard to establish. Limited information is available on this subject in the published literatures and difficult to excavate. Chapters in this book are contributed by the experts working on thermal degradation and analysis of the wide variety of advanced and traditional materials. Each chapter discusses the material, its possible application, behavior of chemical entities when exposed to high-temperature environment and mode and the mechanistic route of its decomposition. Such information is crucial while selecting the chemical ingredients during the synthesis or development of new materials technology.
Download or read book Reliability of Organic Compounds in Microelectronics and Optoelectronics written by Willem Dirk van Driel and published by Springer Nature. This book was released on 2022-01-31 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide a comprehensive reference into the critical subject of failure and degradation in organic materials, used in optoelectronics and microelectronics systems and devices. Readers in different industrial sectors, including microelectronics, automotive, lighting, oil/gas, and petrochemical will benefit from this book. Several case studies and examples are discussed, which readers will find useful to assess and mitigate similar failure cases. More importantly, this book presents methodologies and useful approaches in analyzing a failure and in relating a failure to the reliability of materials and systems.
Download or read book Aging and Stabilization of Polymers written by M. B. Neiman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for a broad development of the production of polymer ma terials has become evident. All these materials are subject to various types of aging (destruction); hence, stabilizers which permit the stor age, reprocessing, and use of polymer materials without any appreci able change in their properties must be introduced into them. In recent years, this problem of stabilizing polymers has attracted the attention of many scientists and technologists, both in the USSR and abroad. The scientific basis of the foreign studies will be found in a number of theo retical premises, but chiefly the theory of chain reactions with un branched chains. In the Soviet Union, the concepts of Academician N. N. Semenov on chain reactions with degenerate branches have become the starting point of theoretical studies of the stabilization and destruction of polymers. Soviet scientists have developed a theory of critical concentrations of antioxidants and have shown that the processes of stabilization have a very complex chemical character. The nature of the polymers them selves greatly affects these processes and consequently, different stabil izers are required for polymers of different structures. In addition, it has been shown that the antioxidants used thus far can not only cause chain termination, but can also initiate oxidation and give rise to de generate branches.
Download or read book Marine Anthropogenic Litter written by Melanie Bergmann and published by Springer. This book was released on 2015-06-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how man-made litter, primarily plastic, has spread into the remotest parts of the oceans and covers all aspects of this pollution problem from the impacts on wildlife and human health to socio-economic and political issues. Marine litter is a prime threat to marine wildlife, habitats and food webs worldwide. The book illustrates how advanced technologies from deep-sea research, microbiology and mathematic modelling as well as classic beach litter counts by volunteers contributed to the broad awareness of marine litter as a problem of global significance. The authors summarise more than five decades of marine litter research, which receives growing attention after the recent discovery of great oceanic garbage patches and the ubiquity of microscopic plastic particles in marine organisms and habitats. In 16 chapters, authors from all over the world have created a universal view on the diverse field of marine litter pollution, the biological impacts, dedicated research activities, and the various national and international legislative efforts to combat this environmental problem. They recommend future research directions necessary for a comprehensive understanding of this environmental issue and the development of efficient management strategies. This book addresses scientists, and it provides a solid knowledge base for policy makers, NGOs, and the broader public.
Download or read book Polymer Degradation and Stabilisation written by Norman Grassie and published by CUP Archive. This book was released on 1988-04-14 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of polymer degradation and stabilisation is of considerable practical importance as the industrial uses of polymeric materials continue to expand. In this book, the authors lucidly relate technological phenomena to the chemistry and physics of degradation and stabilisation processes. Degradation embraces a variety of technologically important phenomena ranging from relatively low temperature processes such as 'weathering' of plastics, 'fatigue' of rubbers through the processing of polymers in shearing mixers to very high temperature processes such as flammability and ablation. All these technological phenomena have in common certain basic chemical reactions. Thus 'weathering' has its roots in photo-oxidation, 'fatigue' and melt-degradation in mechano-oxidation and flammability, and ablation in ablation in pyrolysis and vapour phase oxidation.
