Download or read book Thermo Hydro Mechanical Wood Processing written by Parvis Navi and published by CRC Press. This book was released on 2012-02-07 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describing the history and state-of-the-art of the thermo-hydrous manipulation of wood, this book provides either a desk reference or a field manual of wood science. It examines the polymeric components of wood and its multilevel hierarchical structure that confer its unique general-purpose character and faculty for transformation. Exceeding all other material in its capacity to deform under controlled conditions and for a proscribed outcome, wood, under thermo-hydrous conditions, permits a multitude of industrial processes. Discussing the processes at work and the industrial applications, this book is a must for all interested in the manipulation of wood.
Download or read book Introduction to Thermo hydro mechanical THM Wood Processing written by Dick Sandberg and published by . This book was released on 2007 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermo Hydro Mechanical Wood Processing written by Parvis Navi and published by EPFL Press. This book was released on 2012-02-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describing the history and state-of-the-art of the thermo-hydrous manipulation of wood, this book provides either a desk reference or a field manual of wood science. It examines the polymeric components of wood and its multilevel hierarchical structure that confer its unique general-purpose character and faculty for transformation. Exceeding all other material in its capacity to deform under controlled conditions and for a proscribed outcome, wood, under thermo-hydrous conditions, permits a multitude of industrial processes. Discussing the processes at work and the industrial applications, this book is a must for all interested in the manipulation of wood.
Download or read book Thermo Hydro Mechanical Wood Processing written by Parvis Navi and published by CRC Press. This book was released on 2012-02-07 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describing the history and state-of-the-art of the thermo-hydrous manipulation of wood, this book provides either a desk reference or a field manual of wood science. It examines the polymeric components of wood and its multilevel hierarchical structure that confer its unique general-purpose character and faculty for transformation. Exceeding all other material in its capacity to deform under controlled conditions and for a proscribed outcome, wood, under thermo-hydrous conditions, permits a multitude of industrial processes. Discussing the processes at work and the industrial applications, this book is a must for all interested in the manipulation of wood.
Download or read book Mechano chemical Transformations of Wood During Thermo hydro mechanical Processing Workshop written by Parviz Navi and published by . This book was released on 2011 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Processing Technologies for the Forest and Biobased Products Industries written by Marius C. Barbu and published by LIT Verlag Münster. This book was released on 2010 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Deepwater Horizon oil spill in April 2010 has shown us that increasing risks and costs have to be accepted to satisfy the increasing demand of material and energy resources from a worldwide perspective. Increasing the recovery of raw materials is one possibility, but another one is increasing efficiency in processing and production. Therefore, the development and improvement of processing technologies is a crucial factor for economic progression. This book contains discussions from the 1st International Conference on Processing Technologies for the Forest and Biobased Products Industries, held in October 2010 at Salzburg University of Applied Sciences Kuchl/Austria. The conference provided a forum for discussions among researchers, producers, and consumers of forest and biobased products and acted as a catalyst for new research on process technologies, on quality control and process improvement, and on new concepts for use by technical managers, operations managers, and business managers. The book presents an overview of new developments in processing technologies in the forest and biobased products industries. (Series: Austria: Forschung und Wissenschaft - Technik)
Download or read book Wood Modification Technologies written by Dick Sandberg and published by CRC Press. This book was released on 2021-07-14 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes how to Improvement of wood products Describes Sustainable development Covers Environmental industrial processing
Download or read book Challenges in Mechanics of Time Dependent Materials Volume 2 written by Bonnie Antoun and published by Springer. This book was released on 2016-09-20 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2016 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Extreme Environments & Environmental Effects Structure-Function of Performance of PE Effects of Inhomogeneities & Interfaces Characterization Across Scales Mechanics of Energy & Energetic Materials Metallic Materials Viscoelasticity & Viscoplasticity
Download or read book Wood Modification written by Callum A. S. Hill and published by John Wiley & Sons. This book was released on 2007-02-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is exclusively concerned with wood modification, although many of these processes are generic and can be applied to other lignocellulosic materials. There have been many rapid developments in wood modification over the past decade and, in particular, there has been considerable progress made in the commercialisation of technologies. Topics covered include: The use of timber in the 21st century Modifying the properties of wood Chemical modification of wood: Acetic Anhydride Modification and reaction with other chemicals Thermal modification of wood Surface modification Impregnation modification Commercialisation of wood modification Environmental consideration and future developments This is the first time that a book has covered all wood modification technologies in one text. Although the book covers the main research developments in wood modification, it also puts wood modification into context and additionally deals with aspects of commercialisation and environmental impact. This book is very timely, because wood modification is undergoing huge developments at the present time, driven in part by environmental concerns regarding the use of wood treated with certain preservatives. There has been considerable commercial interest shown in wood modification over the past decade, with products based upon thermal modification, and furfurylation now being actively being marketed. The next few years will see the commercialisation of acetylation and impregnation modification. This is a new industry, but one that has enormous potential. This book will prove useful to all those with an interest in wood modification including researchers, technologists and professionals working in wood science and timber engineering, wood preservation, and well as professionals in the paper and pulp industries, and those with an interest in the development of renewable materials.
Download or read book Book of abstracts The Sixth European Conference on Wood Modification Cankarjev Dom Cultural and Congress Centre Ljubljana Slovenia 17 18 September 2012 in association with COST FP0904 Thermo hydro mechanical wood behaviour and processing COST FP1006 Bringing new functions to wood through surface modification written by European Conference on Wood Modification and published by . This book was released on 2012 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Modification written by Callum A. S. Hill and published by John Wiley & Sons. This book was released on 2006-02-17 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is exclusively concerned with wood modification, although many of these processes are generic and can be applied to other lignocellulosic materials. There have been many rapid developments in wood modification over the past decade and, in particular, there has been considerable progress made in the commercialisation of technologies. Topics covered include: The use of timber in the 21st century Modifying the properties of wood Chemical modification of wood: Acetic Anhydride Modification and reaction with other chemicals Thermal modification of wood Surface modification Impregnation modification Commercialisation of wood modification Environmental consideration and future developments This is the first time that a book has covered all wood modification technologies in one text. Although the book covers the main research developments in wood modification, it also puts wood modification into context and additionally deals with aspects of commercialisation and environmental impact. This book is very timely, because wood modification is undergoing huge developments at the present time, driven in part by environmental concerns regarding the use of wood treated with certain preservatives. There has been considerable commercial interest shown in wood modification over the past decade, with products based upon thermal modification, and furfurylation now being actively being marketed. The next few years will see the commercialisation of acetylation and impregnation modification. This is a new industry, but one that has enormous potential. This book will prove useful to all those with an interest in wood modification including researchers, technologists and professionals working in wood science and timber engineering, wood preservation, and well as professionals in the paper and pulp industries, and those with an interest in the development of renewable materials.
Download or read book Wood Modification in Europe written by Dennis Jones and published by Firenze University Press. This book was released on 2019-01-01 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is a result of a questionnaire and subsequent collation of data, which outlines the current status of wood modification across Europe in terms of national inventories and groups that have reported current activity in the respective research areas covered in this report.
Download or read book Wood Variation written by Bruce J. Zobel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood is the usual end product of a forestry operation. Because of its importance, numerous studies have been made relative to wood prop erties, the causes of wood variation, and how best to develop wood for desired products. There is voluminous literature related to these subjects, but it is neither well known nor appreciated by foresters because the publications are often not available or are not well understood by the forester or by those who use the wood. Frequently, the literature is confusing and contradictory, making it difficult for the nonspecialist to use what information is available. In order to produce and use wood efficiently, the variation pat terns within trees, among trees within species, and among species must be understood. This also requires some knowledge of the causes of variation and the effects of different wood properties upon utiliza tion. The information about variation patterns, their causes, and con trol and effect upon the product must be known by the tree grower, the tree breeder, and the tree harvester as well as by those who ultimately convert wood into a final, salable product.
Download or read book Wood Polymer Composites written by K O Niska and published by Elsevier. This book was released on 2008-05-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood-polymer composites (WPC) are materials in which wood is impregnated with monomers that are then polymerised in the wood to tailor the material for special applications. The resulting properties of these materials, from lightness and enhanced mechanical properties to greater sustainability, has meant a growing number of applications in such areas as building, construction and automotive engineering. This important book reviews the manufacture of wood-polymer composites, how their properties can be assessed and improved and their range of uses. After an introductory chapter, the book reviews key aspects of manufacture, including raw materials, manufacturing technologies and interactions between wood and synthetic polymers. Building on this foundation, the following group of chapters discusses mechanical and other properties such as durability, creep behaviour and processing performance. The book concludes by looking at orientated wood-polymer composites, wood-polymer composite foams, at ways of assessing performance and at the range of current and future applications. With its distinguished editors and international team of contributors, Wood-polymer composites is a valuable reference for all those using and studying these important materials. Provides a comprehensive survey of major new developments in wood-polymer composites Reviews the key aspects of manufacture, including raw materials and manufacturing technologies Discusses properties such as durability, creep behaviour and processing performance
Download or read book Advances in Mechanics of Materials and Structural Analysis written by Holm Altenbach and published by Springer. This book was released on 2018-01-04 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of contributions on the advanced mechanics of materials and mechanics of structures approaches, written in honor of Professor Kienzler. It covers various topics related to constitutive models for advanced materials, recent developments in mechanics of configuration forces, as well as new approaches to the efficient modeling and analysis of engineering structures.
Download or read book Industrial Heat Pump Assisted Wood Drying written by Vasile Minea and published by CRC Press. This book was released on 2018-08-06 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses conventional as well as unconventional wood drying technologies. It covers fundamental thermophysical and energetic aspects and integrates two complex thermodynamic systems, conventional kilns and heat pumps, aimed at improving the energy performance of dryers and the final quality of dried lumber. It discusses advanced components, kiln energy requirements, modeling, and software and emphasizes dryer/heat pump optimum coupling, control, and energy efficiency. Problems are included in most chapters as practical, numerical examples for process and system/components calculation and design. The book presents promising advancements and R&D challenges and future requirements.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
