Download or read book Thermo Hydro Mechanical Coupling in Fractured Rock written by Hans-Joachim Kümpel and published by Birkhäuser. This book was released on 2012-12-06 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: (4). The next three papers extend these views by taking a closer look on parameters that govern hydraulic diffusivity in sandstones and other types of rocks. Specific targets addressed are the influence of differential stress on permeability (5), imaging of the fracture geometry (6), and pressure induced variations in the pore geometry (7). Contributions no. 8 to 10 cover investigations of permeability-porosity relationships during rock evolution (8), of the formation, propagation, and roughness of fractures in a plexi-glass block (9), and pressure oscillation effects of two-phase flow under controlled conditions (10). The subsequent four articles focus on diverse modeling approaches. Issues considered are how the geometry and the mechanical behavior of fractures can be characterized by mathematical expressions (11), how the evolution of permeability in a microcracking rock can be expressed by an analytical model (12), deviations from the cubic law for a fracture of varying aperture (13), and the numerical simulation of scale effects in flow through fractures (14). Three further papers refer to in situ observations, being related to topics as the assessment of in situ permeability from the spatio temporal distribution of an aftershock sequence (15), to the scale dependence of hydraulic pathways in crystalline rock (16), and to the significance of pore pressure - stress coupling in deep tunnels and galleries (17).
Download or read book Thermo hydro mechanical Coupling in Rock Mechanics written by Ove Stephansson and published by . This book was released on 1995 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coupled Thermo Hydro Mechanical Chemical Processes in Geo systems written by Ove Stephansson and published by Elsevier. This book was released on 2004-11-03 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the most important and exciting current steps forward in geo-engineering is the development of coupled numerical models. They represent the basic physics of geo-engineering processes which can include the effects of heat, water, mechanics and chemistry. Such models provide an integrating focus for the wide range of geo-engineering disciplines. The articles within this volume were originally presented at the inaugural GeoProc conference held in Stockholm and contain a collection of unusually high quality information not available elsewhere in an edited and coherent form. This collection not only benefits from the latest theoretical developments but also applies them to a number of practical and wide ranging applications. Examples include the environmental issues around radioactive waste disposal deep in rock, and the search for new reserves of oil and gas.
Download or read book Coupled Thermo Hydro Mechanical Chemical Processes in Fractured Rocks written by Zhihong Zhao and published by Springer Nature. This book was released on 2023-11-12 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the coupled Thermo-Hydro-Mechanical-Chemical (THMC) processes in fractured rocks at varying scales from single fractures to fracture networks. It also discussed the implication and potential application of the advanced understanding of coupled THMC processes in fractured rocks for geotechnical and geo-energy engineering.
Download or read book Coupled Thermo Hydro Mechanical Processes in Fractured Rock Masses written by Fengshou Zhang and published by Springer Nature. This book was released on 2023-09-11 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of thermo-hydro-mechanical coupled processes in fractured rock masses has close relevance to energy-related deep earth engineering activities, such as enhanced geothermal systems, geological disposal of radioactive waste, sequestration of CO2, long-term disposal of waste water and recovery of hydrocarbons from unconventional reservoirs. Despite great efforts by engineers and researchers, comprehensive understanding of the thermo-hydro-mechanical coupled processes in fractured rock mass remains a great challenge. The discrete element method (DEM), originally developed by Dr. Peter Cundall, has become widely used for the modeling of a rock mass, including its deformation, damage, fracturing and stability. DEM modeling of the coupled thermo-hydro-mechanical processes in fractured rock masses can provide some unique insights, to say the least, for better understanding of those complex issues. The authors of this book have participated in various projects involving DEM modeling of coupled thermo-hydro-mechanical processes during treatment of a rock mass by fluid injection and/or extraction and have provided consulting services to some of the largest oil-and-gas companies in the world. The breadth and depth of our engineering expertise are reflected by its successful applications in the major unconventional plays in the world, including Permian, Marcellus, Bakken, Eagle Ford, Horn River, Chicontepec, Sichuan, Ordos and many more. The unique combination of the state-of-the-art numerical modeling techniques with state-of-the-practice engineering applications makes the presented material relevant and valuable for engineering practice. We believe that it is beneficial to share the advances on this subject and promote some further development.
Download or read book Thermo Hydromechanical and Chemical Coupling in Geomaterials and Applications written by Jian-Fu Shao and published by John Wiley & Sons. This book was released on 2013-05-10 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: GeoProc2008 collects the proceedings of the International Conference on Coupled T-H-M-C (thermal, hydraulic, mechanical, chemical) Processes in Geosystems.
Download or read book Special Issue Thermo hydro mechanical Coupling in Fractured Rock written by Hans-Joachim Kuempel and published by . This book was released on 2003 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermo Hydro Mechanical Chemical Processes in Fractured Porous Media Modelling and Benchmarking written by Olaf Kolditz and published by Springer. This book was released on 2014-11-26 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book provides guidance to understanding complicated coupled processes based on the experimental data available and implementation of developed algorithms in numerical codes. Results of selected test cases in the fields of closed-form solutions (e.g., deformation processes), single processes (such as groundwater flow) as well as coupled processes are presented. It is part of the OpenGeoSys initiative - an open source project to share knowledge and experience in environmental analysis and scientific computation with the community.
Download or read book Earthquakes and Water written by Chi-yuen Wang and published by Springer. This book was released on 2010-01-11 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the graduate course in Earthquake Hydrology at Berkeley University, this text introduces the basic materials, provides a comprehensive overview of the field to interested readers and beginning researchers, and acts as a convenient reference point.
Download or read book Modelling Rock Fracturing Processes written by Baotang Shen and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text book provides the theoretical background of rock fracture mechanics and displacement discontinuity methods used for the modelling of geomechanical problems. The computer program FRACOD is used to analyse the fracture problems, assessing fracture initiation and propagation in tension (Mode I), shear (Mode II) and mixed mode I and II of solid intact or jointed geomaterials. The book also presents the fundamentals of thermo-mechanical coupling and hydro-mechanical coupling. Formulations of multiple regional mechanical, thermal and hydraulic functions, which allow analyses of fracture mechanics problems for structures made of brittle, rock-like materials, are provided. In addition, instructive examples of code verification and applications are presented. Additional material: The 2-D version of the FRACOD program, a manual on the program and a wealth of verification examples of classical problems in physics, mechanics and hydromechanics are available at http://extras.springer.com. A large number of applications related to civil, mining, petroleum and environmental engineering are also included. - The first textbook available on modelling of rock fracture propagation - Introduces readers to the fundamentals of rock fracturing - Uses a modern style of teaching with theory, mathematical modelling and applications in one package - The basic version of the FRACOD software, manual, verification examples and applications are available as additional material - The FRACOD program and manual enable the readers to solve fracture propagation problems on their own --------------------------- Ki-Bok Min, Department of Energy Resources Engineering, College of Engineering, Seoul National University, Korea “Challenging rock engineering applications require extreme conditions of stress, temperature and hydraulic pressure resulting in rock fracturing to a various extent. The FRACOD is one of few computer codes available in engineering rock mechanics that can simulate the initiation and propagation of fractures often interacting with natural fractures. Its capability has been significantly enhanced to include the hydraulic and thermal fracturing with concerted interaction from multi-national research and industry partners. My experience with the FRACOD is very positive and I am certain that its already-excellent track record will expand further in the future."
Download or read book Coupled Thermo Hydro Mechanical Processes of Fractured Media written by O. Stephanson and published by Elsevier. This book was released on 1997-02-10 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work brings together the results, information and data that emerged from an international cooperative project, DECOVALEX, 1992-1995. This project was concerned with the mathematical and experimental studies of coupled thermo(T) -hydro(H) -mechanical(M) processes in fractured media related to radioactive waste disposal. The book presents, for the first time, the systematic formulation of mathematical models of the coupled T-H-M processes of fractured media, their validation against theoretical bench-mark tests, and experimental studies at both laboratory and field scales. It also presents, for the first time, a comprehensive analysis of continuum, and discrete approaches to the study of the problems of (as well as a complete description of), the computer codes applied to the studies. The first two chapters provide a conceptual introduction to the coupled T-H-M processes in fractured media and the DECOVALEX project. The next seven chapters give a state-of-the-art survey of the constitutive models of rock fractures and formulation of coupled T-H-M phenomena with continuum and discontinuum approaches, and associated numerical methods. A study on the three generic Bench-Mark Test problems and six Test Case problems of laboratory and field experiments are reported in chapters 10 to 18. Chapter 19 contains lessons learned during the project. The research contained in this book will be valuable for designers, practising engineers and national waste management officials who are concerned with planning, design and performance, and safety assessments of radioactive waste repositories. Researchers and postgraduate students working in this field will also find the book of particular relevance.
Download or read book Rock Mechanics Contributions and Challenges written by W. Hustrulid and published by CRC Press. This book was released on 2020-12-17 with total page 1085 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theme of the 31st US Symposium on Rock Mechanics is 'Rock Mechanics contributions and challenges', having as objective the examination and quantification of the progress that has been achieved in addressing the major practical challenges facing the science of rock mechanics and mine design. The 124 papers included in the proceedings cover areas such as: experimental studies (laboratory and field); conceptual, analytical, and numerical modeling; design and construction methods. 35 papers deal with practical mining problems and include information on rock reinforcement technology, blasting, rock bursts, open pit mining, remote sensing and borehole geophysics, mechanical fragmentation, and subsidence. Areas emphasized are coal and metal mine design problems. Other papers deal with the newest computer models, new instruments, fracture mechanics, new laboratory testing techniques, and in situ testing.
Download or read book Mont Terri Rock Laboratory 20 Years written by Paul Bossart and published by Birkhäuser. This book was released on 2017-12-20 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The international Mont Terri rock laboratory in Switzerland plays a central role in the safety and construction of deep geological nuclear repositories in clay formations. The laboratory has developed and refined a range of new measurement and evaluation methods: it has e.g. advanced the determination of rock parameters using innovative borehole geophysics, improved the methodology for characterizing pore-water and microbial activity in claystones, and greatly improved our understanding of diffusion and retention processes of radionuclides in and through claystones. The methods and insights described in this compendium can also be applied to low-permeability rocks at various sites around the globe, and in other fields of application.
Download or read book Porous Rock Fracture Mechanics written by Amir Shojaei and published by Woodhead Publishing. This book was released on 2017-05-05 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Porous Rock Failure Mechanics: Hydraulic Fracturing, Drilling and Structural Engineering focuses on the fracture mechanics of porous rocks and modern simulation techniques for progressive quasi-static and dynamic fractures. The topics covered in this volume include a wide range of academic and industrial applications, including petroleum, mining, and civil engineering. Chapters focus on advanced topics in the field of rock’s fracture mechanics and address theoretical concepts, experimental characterization, numerical simulation techniques, and their applications as appropriate. Each chapter reflects the current state-of-the-art in terms of the modern use of fracture simulation in industrial and academic sectors. Some of the major contributions in this volume include, but are not limited to: anisotropic elasto-plastic deformation mechanisms in fluid saturated porous rocks, dynamics of fluids transport in fractured rocks and simulation techniques, fracture mechanics and simulation techniques in porous rocks, fluid-structure interaction in hydraulic driven fractures, advanced numerical techniques for simulation of progressive fracture, including multiscale modeling, and micromechanical approaches for porous rocks, and quasi-static versus dynamic fractures in porous rocks. This book will serve as an important resource for petroleum, geomechanics, drilling and structural engineers, R&D managers in industry and academia. Includes a strong editorial team and quality experts as chapter authors Presents topics identified for individual chapters are current, relevant, and interesting Focuses on advanced topics, such as fluid coupled fractures, rock’s continuum damage mechanics, and multiscale modeling Provides a ‘one-stop’ advanced-level reference for a graduate course focusing on rock’s mechanics
Download or read book Thermo Hydro Mechanical Chemical Processes in Porous Media written by Olaf Kolditz and published by Springer Science & Business Media. This book was released on 2012-04-06 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises an assembly of benchmarks and examples for porous media mechanics collected over the last twenty years. Analysis of thermo-hydro-mechanical-chemical (THMC) processes is essential to many applications in environmental engineering, such as geological waste deposition, geothermal energy utilisation, carbon capture and storage, water resources management, hydrology, even climate chance. In order to assess the feasibility as well as the safety of geotechnical applications, process-based modelling is the only tool to put numbers, i.e. to quantify future scenarios. This charges a huge responsibility concerning the reliability of computational tools. Benchmarking is an appropriate methodology to verify the quality of modelling tools based on best practices. Moreover, benchmarking and code comparison foster community efforts. The benchmark book is part of the OpenGeoSys initiative - an open source project to share knowledge and experience in environmental analysis and scientific computation.
Download or read book Advances on Coupled Thermo hydro mechanical chemical Processes in Geosystems and Engineering written by Weiya Xu and published by . This book was released on 2007 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deterministic Numerical Modeling of Soil Structure Interaction written by Stephane Grange and published by John Wiley & Sons. This book was released on 2021-12-22 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to describe soil–structure interaction in various situations (nonlinear, static, dynamic, hydro-mechanical couplings), this book gives an overview of the main modeling methods developed in geotechnical engineering. The chapters are centered around: the finite element method (FEM), the finite difference method (FDM), and the discrete element method (DEM). Deterministic Numerical Modeling of Soil–Structure Interaction allows the reader to explore the classical and well-known FEM and FDM, using interface and contact elements available for coupled hydro-mechanical problems. Furthermore, this book provides insight on the DEM, adapted for interaction laws at the grain level. Within a classical finite element framework, the concept of macro-element is introduced, which generalizes constitutive laws of SSI and is particularly straightforward in dynamic situations. Finally, this book presents the SSI, in the case of a group of structures, such as buildings in a town, using the notion of metamaterials and a geophysics approach.
