Download or read book Thermal Studies of Diesel Engine Exhaust Systems written by David J. Kapparos and published by . This book was released on 2004 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Thermal Management of Engines written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on 2022-01-01 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook deals with the vast subject of thermal management of engines and vehicles by applying the state of the art research to diesel and natural gas engines. The contributions from global experts focus on management, generation, and retention of heat in after-treatment and exhaust systems for light-off of NOx, PM, and PN catalysts during cold start and city cycles as well as operation at ultralow temperatures. This book will be of great interest to those in academia and industry involved in the design and development of advanced diesel and CNG engines satisfying the current and future emission standards.
Download or read book A Thermal Analysis of a Solid Injection Diesel Engine Using Several Fuels written by Karl Wesley Keiser and published by . This book was released on 1924 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance Analysis of Capture of Heat Energy from Diesel Engine Exhaust written by Prasada Rao Raghupatruni and published by . This book was released on 2007 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Diesel generators produce electrical power. New diesel generators, which use turbochargers, release a significant amount of heat energy from the turbocharger after coolers. Another significant amount of heat energy released from diesel engines and normally not captured for useful applications is the heat released from exhaust manifolds. This project discusses the design, installation, instrumentation, performance measurement and performance analysis of an exhaust heat recovery system for a new diesel generator, which has injection timing control. A diesel generator releases about one-third of its fuel energy in exhaust heat. The main aspect of this project is to study heat recovery from the exhaust of a diesel generator for heating purposes. The amount of heat liberated from the exhaust can be used both for the space and floor heating. This project covers the work for the selection of a desired heat recovery system as well as an analysis of the results of the selected heat recovery system. The amount of heat recovered from the exhaust by the heat recovery system was 50% of the total amount of heat present in the exhaust. No corrosion spots were found on the heat exchanger during the heat recovery system run time"--Leaf iii.
Download or read book Comparative Evaluation of Three Alternative Power Cycles for Waste Heat Recovery from the Exhaust of Adiabatic Diesel Engines written by M. Murray Bailey and published by . This book was released on 1985 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transient thermal simulation process over a diesel exhaust system during regeneration written by Juan Carlos Martínez Laurent and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Technologies for Emission Control in Marine Diesel Engines written by Masaaki Okubo and published by Butterworth-Heinemann. This book was released on 2019-08-29 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Technologies for Emission Control in Marine Diesel Engines provides a unique overview on marine diesel engines and aftertreatment technologies that is based on the authors' extensive experience in research and development of emission control systems, especially plasma aftertreatment systems. The book covers new and updated technologies, such as combustion improvement and after treatment, SCR, the NOx reduction method, Ox scrubber, DPF, Electrostatic precipitator, Plasma PM decomposition, Plasma NOx reduction, and the Exhaust gas recirculation method. This comprehensive resource is ideal for marine engineers, engine manufacturers and consultants dealing with the development and implementation of aftertreatment systems in marine engines. - Includes recent advances and future trends of marine engines - Discusses new and innovative emission technologies for marine diesel engines and their regulations - Covers aftertreatment technologies that are not widely applied, such as catalysts, SCR, DPF and plasmas
Download or read book Exhaust Systems Models Investigation by Theoretical Group Methods written by Jörg Volkmann and published by Cuvillier Verlag. This book was released on 2007 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Management in Automotive Applications written by T Yomi Obidi and published by SAE International. This book was released on 2015-03-30 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: With new and more stringent standards addressing emission reduction and fuel economy, the importance of a well-developed engine thermal management system becomes even greater. With about 30% of the fuel intake energy dissipated through the cooling system and another 30% through the exhaust system, it is to be expected that serious research has been dedicated to this field. Thermal Management in Automotive Applications, edited by Dr. T. Yomi Obidi, brings together a focused collection of SAE technical papers on the subject. It offers insights into how thermal management impacts the efficiency of engines in heavy vehicles, the effects of better coolant flow control, and the use of smart thermostat and next-generation cooling pumps. It also provides an in-depth analysis of the possible gains in optimum warm-up sequence and thermal management on a small gasoline engine. With continuously increasing gadgetry in modern vehicles, the average temperature in the engine compartment has seen significant increase. It is important to be able to divert the heat away from passengers as well as from some components that may be negatively impacted by excessive temperatures. Thermal Management in Automotive Applications points out solutions to this challenge, including material and design options.
Download or read book Ignition Characteristics of Internal Combustion Engine Exhaust Products written by Luigi U. DeBernardo and published by . This book was released on 1980 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SAE 2007 08 0078 Analysis on the Thermal Stress of Exhaust Manifold in a Heavy Duty Diesel Engine by Conjugate Heat Transfer Method written by Sang-Kyoo Lee and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exhaust manifold in a heavy-duty diesel engine should be strictly designed on the thermal performance. The current study is to get the temperature distribution and heat transfer coefficients at the walls of the exhaust manifold using a conjugate heat transfer method with the consideration of exhaust gas flow and convective heat transfer. Thermal deformation of the exhaust manifold owing to the thermal stresses is investigated by coupling the temperature distribution into a structural analysis code.
Download or read book Thermo and Fluid Dynamic Processes in Diesel Engines 2 written by James H. Whitelaw and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book edited with a selection of papers from the two-yearly THIESEL Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines, organised by CMT-Mvtores Termicos of the Universidad Po/itecnica de Valencia, Spain. This volume includes versions of papers selected from those presented at the THIESEL 2002 Conference th held on lOth to 13 September 2002. We hope it will be the second volume of a long series reflecting the quality of the THIESEL Conference. This year, the papers are grouped in six main thematic areas: State of the Art and Prospective, Injection Systems and Spray Formation, Combustion and Emissions, Engine Modelling, Alternative Combustion Concepts and Experimental Techniques. The actual conference covered a wider scope of topics, including Air Management and Fuels for Diesel Engines and a couple of papers included reflect this variety. However, the selection of papers published here represents the most current preoccupations of Diesel engine designers, namely how to improve the combustion process using new injection strategies and alternative concepts such as the Homogeneous Charge Combustion Ignition.
Download or read book Pounder s Marine Diesel Engines and Gas Turbines written by Malcolm Latarche and published by Butterworth-Heinemann. This book was released on 2020-12-01 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pounder's Marine Diesel Engines and Gas Turbines, Tenth Edition, gives engineering cadets, marine engineers, ship operators and managers insights into currently available engines and auxiliary equipment and trends for the future. This new edition introduces new engine models that will be most commonly installed in ships over the next decade, as well as the latest legislation and pollutant emissions procedures. Since publication of the last edition in 2009, a number of emission control areas (ECAs) have been established by the International Maritime Organization (IMO) in which exhaust emissions are subject to even more stringent controls. In addition, there are now rules that affect new ships and their emission of CO2 measured as a product of cargo carried. - Provides the latest emission control technologies, such as SCR and water scrubbers - Contains complete updates of legislation and pollutant emission procedures - Includes the latest emission control technologies and expands upon remote monitoring and control of engines
Download or read book Recuperation of Heat from Diesel Generating Sets to Heat Woodlands Garages written by Julien Désy and published by Forest Engineering Research Institute of Canada = Institut canadien de recherches en génie forestier. This book was released on 1980 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Exhaust Emissions and Energy Recovery written by Apostolos Pesiridis and published by Nova Science Pub Incorporated. This book was released on 2014-01-01 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concerns for fuel economy and reduced emissions have turned the attention of automotive internal combustion engine manufacturers to the exhaust system and towards technological system development to account for the significant levels of potential energy that can be recovered. The present volume on Automotive Exhaust Emissions and Energy Recovery for both gasoline and diesel engines is therefore both timely and appropriate. Whereas diesel engines have been predominantly turbocharged, only a relatively small percentage of gasoline engines are similarly equipped, which has led to significant efforts by engine manufacturers in recent years to downsize and down-speed these engines. On the other hand, the relative focus in diesel engine development in terms of emissions and exhaust energy recovery has shifted toward devices other than the turbocharger for enhanced energy recovery and emissions control technologies in order to allow the diesel engines of the future to keep up with the dual-demand for very low emissions and increasing levels of fuel economy. The book focuses on the exhaust system and the technologies and methods used to reduce emissions and increase fuel economy by capitalising on the exhaust gas energy availability (either in the form of gas kinetic energy or as waste heat extracted from the exhaust gas). It is projected that in the short to medium term, advances in exhaust emissions and energy recovery technologies will lead the way in internal combustion engine development and pave the way towards increasing levels of engine hybridisation until fully electric vehicle technology can claim a level of maturity and corresponding market shares to turn the bulk of this focus away from the internal combustion engine. This book is aimed at engine research professionals in the industry and academia, but also towards students of powertrain engineering. The collection of articles in this book reviews the fundamentals of relevance, recent exhaust system technologies, details recent or on-going projects and uncovers future research directions and potentials.
Download or read book Heat and Mass Transfer in Energy Systems written by Alessandro Mauro and published by MDPI. This book was released on 2020-01-09 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the interest of the scientific community towards efficient energy systems has significantly increased. One of the reasons is certainly related to the change in the temperature of the planet, which has increased by 0.76 °C with respect to preindustrial levels, according to the Intergovernmental Panel on Climate Change (IPCC), and is still increasing. The European Union considers it vital to prevent global warming from exceeding 2 °C with respect to pre-industrial levels, as it has been proven that this will result in irreversible and potentially catastrophic changes. These changes in climate are mainly caused by greenhouse gas emissions related to human activities, and can be drastically reduced by employing energy systems for the heating and cooling of buildings, as well as for power production, characterized by high efficiency levels and/or based on renewable energy sources. This Special Issue, published in the Energies journal, includes 13 contributions from across the world, including a wide range of applications such as hybrid residential renewable energy systems, desiccant-based air handling units, heat exchanges for engine WHR, solar chimney systems, and other interesting topics.
Download or read book Innovations in Fuel Economy and Sustainable Road Transport written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2011-10-19 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the Innovations in Fuel Economy and Sustainable Road Transport conference, held in Pune, India, 8-9 November, 2011. Papers examine advances in powertrain, alternative fuels, lightweight vehicles, electric vehicles and hybrid vehicles. An international assembly of senior industry representatives provide insight into research and technological advances in low carbon technology sustainability for road transport, helping towards achieving stringent emissions standards and continual improvements in fuel economy efficiency, all in an expanding Indian market. These technical papers from industry and academia discuss the developments and research of leading organisations. - Discusses maximising powertrain performance for a low carbon agenda - Provides readers with an understanding of the latest developments in alternative fuels - Examines the future landscape for the implementation and development of electric vehicles
