Download or read book Thermal Stress and Strain in Microelectronics Packaging written by John Lau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectronics packaging and interconnection have experienced exciting growth stimulated by the recognition that systems, not just silicon, provide the solution to evolving applications. In order to have a high density/ performance/yield/quality/reliability, low cost, and light weight system, a more precise understanding of the system behavior is required. Mechanical and thermal phenomena are among the least understood and most complex of the many phenomena encountered in microelectronics packaging systems and are found on the critical path of neatly every design and process in the electronics industry. The last decade has witnessed an explosive growth in the research and development efforts devoted to determining the mechanical and thermal behaviors of microelectronics packaging. With the advance of very large scale integration technologies, thousands to tens of thousands of devices can be fabricated on a silicon chip. At the same time, demands to further reduce packaging signal delay and increase packaging density between communicat ing circuits have led to the use of very high power dissipation single-chip modules and multi-chip modules. The result of these developments has been a rapid growth in module level heat flux within the personal, workstation, midrange, mainframe, and super computers. Thus, thermal (temperature, stress, and strain) management is vital for microelectronics packaging designs and analyses. How to determine the temperature distribution in the elec tronics components and systems is outside the scope of this book, which focuses on the determination of stress and strain distributions in the electronics packaging.

Download or read book Power Electronic Packaging written by Yong Liu and published by Springer Science & Business Media. This book was released on 2012-02-15 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronic Packaging presents an in-depth overview of power electronic packaging design, assembly,reliability and modeling. Since there is a drastic difference between IC fabrication and power electronic packaging, the book systematically introduces typical power electronic packaging design, assembly, reliability and failure analysis and material selection so readers can clearly understand each task's unique characteristics. Power electronic packaging is one of the fastest growing segments in the power electronic industry, due to the rapid growth of power integrated circuit (IC) fabrication, especially for applications like portable, consumer, home, computing and automotive electronics. This book also covers how advances in both semiconductor content and power advanced package design have helped cause advances in power device capability in recent years. The author extrapolates the most recent trends in the book's areas of focus to highlight where further improvement in materials and techniques can drive continued advancements, particularly in thermal management, usability, efficiency, reliability and overall cost of power semiconductor solutions.

Download or read book Electronic Materials Handbook written by and published by ASM International. This book was released on 1989-11-01 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1: Packaging is an authoritative reference source of practical information for the design or process engineer who must make informed day-to-day decisions about the materials and processes of microelectronic packaging. Its 117 articles offer the collective knowledge, wisdom, and judgement of 407 microelectronics packaging experts-authors, co-authors, and reviewers-representing 192 companies, universities, laboratories, and other organizations. This is the inaugural volume of ASMAs all-new ElectronicMaterials Handbook series, designed to be the Metals Handbook of electronics technology. In over 65 years of publishing the Metals Handbook, ASM has developed a unique editorial method of compiling large technical reference books. ASMAs access to leading materials technology experts enables to organize these books on an industry consensus basis. Behind every article. Is an author who is a top expert in its specific subject area. This multi-author approach ensures the best, most timely information throughout. Individually selected panels of 5 and 6 peers review each article for technical accuracy, generic point of view, and completeness.Volumes in the Electronic Materials Handbook series are multidisciplinary, to reflect industry practice applied in integrating multiple technology disciplines necessary to any program in advanced electronics. Volume 1: Packaging focusing on the middle level of the electronics technology size spectrum, offers the greatest practical value to the largest and broadest group of users. Future volumes in the series will address topics on larger (integrated electronic assemblies) and smaller (semiconductor materials and devices) size levels.

Download or read book The Simulation of Thermomechanically Induced Stress in Plastic Encapsulated IC Packages written by Gerard Kelly and published by Springer Science & Business Media. This book was released on 1999-04-30 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is motivated by the need to understand and predict the complex stress distributions, transfer mechanisms, warpage, and potential failures arising from the encapsulation of devices in plastic. Failures like delaminations, package cracking, and metal shift occur due to the build-up of residual stress and warpage in the packages because of the TCE mismatch between the package materials as the package cools from its molding temperature to room temperature. The correct use of finite element tools for these problems is emphasised. F.E. techniques are used to predict the internal package stress distribution and help explain the stress transfer mechanism between the die, die paddle, and plastic after molding. Out-of-plane shear stress components are shown to be responsible for experimentally observed metal shift patterns on the die surface. Delaminations dramatically alter the internal stress state within a package, increasing the tensile stress in the plastic and so the likelihood of plastic cracks, the stress on wire bonds, and the incidence of wire bond failure. The application of F.E. techniques to predict the post-mold warpage of both thermally enhanced PQFPs and TQFPs is described. Simulations of a thermally enhanced PQFP warpage based on standard modelling assumptions alone fail to predict either the magnitude or its direction correctly. The modelling assumptions need to be modified to include the chemical shrinkage of the molding compound to enable accurate predictions of package warpage to be made, particularly when the packages are asymmetric in structure. Microsystem packaging in both plastic and 3D package body styles is reviewed. Although microsystem packaging is derived from IC packaging, additional requirements for microsystems, not common to IC packaging are highlighted. The assembly stresses on a novel microsystem, incorporating a micromachined silicon membrane pump integrated into a 3D plastic encapsulated vertical multichip module package (MCM-V), are analysed.

Download or read book The Simulation of Thermomechanically Induced Stress in Plastic Encapsulated IC Packages written by Gerard Kelly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the greatest challenges facing package manufacturers is to develop reliable fine pitch thin packages with high leadcounts, capable of dissipating heat, and deliver them in volume to the market in a very short space of time. How can this be done? Firstly, package structures, materials, and manufacturing processes must be optimised. Secondly, it is necessary to predict the likely failures and behaviour of parts before manufacture, whilst minimising the amount of time and money invested in undertaking costly experimental trials. In a high volume production environment, any design improvement that increases yield and reliability can be of immense benefit to the manufacturer. Components and systems need to be packaged to protect the IC from its environment. Encapsulating devices in plastic is very cheap and has the advantage of allowing them to be produced in high volume on an assembly line. Currently 95% of all ICs are encapsulated in plastic. Plastic packages are robust, light weight, and suitable for automated assembly onto printed circuit boards. They have developed from low pincount (14-28 pins) dual-in-line (DIP) packages in the 1970s, to fine pitch PQFPs (plastic quad flat pack) and TQFPs (thin quad flat pack) in the 1980s-1990s, with leadcounts as high as 256. The demand for PQFPs in 1997 was estimated to be 15 billion and this figure is expected to grow to 20 billion by the year 2000.

Download or read book Advanced Materials for Thermal Management of Electronic Packaging written by Xingcun Colin Tong and published by Springer Science & Business Media. This book was released on 2011-01-05 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for advanced thermal management materials in electronic packaging has been widely recognized as thermal challenges become barriers to the electronic industry’s ability to provide continued improvements in device and system performance. With increased performance requirements for smaller, more capable, and more efficient electronic power devices, systems ranging from active electronically scanned radar arrays to web servers all require components that can dissipate heat efficiently. This requires that the materials have high capability of dissipating heat and maintaining compatibility with the die and electronic packaging. In response to critical needs, there have been revolutionary advances in thermal management materials and technologies for active and passive cooling that promise integrable and cost-effective thermal management solutions. This book meets the need for a comprehensive approach to advanced thermal management in electronic packaging, with coverage of the fundamentals of heat transfer, component design guidelines, materials selection and assessment, air, liquid, and thermoelectric cooling, characterization techniques and methodology, processing and manufacturing technology, balance between cost and performance, and application niches. The final chapter presents a roadmap and future perspective on developments in advanced thermal management materials for electronic packaging.

Download or read book Advanced Electronic Packaging written by Richard K. Ulrich and published by John Wiley & Sons. This book was released on 2006-02-24 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: As in the First Edition, each chapter in this new Second Edition is authored by one or more acknowledged experts and then carefully edited to ensure a consistent level of quality and approach throughout. There are new chapters on passive devices, RF and microwave packaging, electronic package assembly, and cost evaluation and assembly, while organic and ceramic substrates are now covered in separate chapters. All the hallmarks of the First Edition, which became an industry standard and a popular graduate-level textbook, have been retained. An Instructor's Manual presenting detailed solutions to all the problems in the book is available upon request from the Wiley Makerting Department.

Download or read book Failure Modes and Mechanisms in Electronic Packages written by P. Singh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the proliferation of packaging technology, failure and reliability have become serious concerns. This invaluable reference details processes that enable detection, analysis and prevention of failures. It provides a comprehensive account of the failures of device packages, discrete component connectors, PCB carriers and PCB assemblies.

Download or read book Modeling Analysis Design and Tests for Electronics Packaging beyond Moore written by Hengyun Zhang and published by Woodhead Publishing. This book was released on 2019-11-14 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, Analysis, Design and Testing for Electronics Packaging Beyond Moore provides an overview of electrical, thermal and thermomechanical modeling, analysis, design and testing for 2.5D/3D. The book addresses important topics, including electrically and thermally induced issues, such as EMI and thermal issues, which are crucial to package signal and thermal integrity. It also covers modeling methods to address thermomechanical stress related to the package structural integrity. In addition, practical design and test techniques for packages and systems are included. - Includes advanced modeling and analysis methods and techniques for state-of-the art electronics packaging - Features experimental characterization and qualifications for the analysis and verification of electronic packaging design - Provides multiphysics modeling and analysis techniques of electronic packaging

Download or read book Robust Design of Microelectronics Assemblies Against Mechanical Shock Temperature and Moisture written by E-H Wong and published by Woodhead Publishing. This book was released on 2015-05-23 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Design of Microelectronics Assemblies Against Mechanical Shock, Temperature and Moisture discusses how the reliability of packaging components is a prime concern to electronics manufacturers. The text presents a thorough review of this important field of research, providing users with a practical guide that discusses theoretical aspects, experimental results, and modeling techniques. The authors use their extensive experience to produce detailed chapters covering temperature, moisture, and mechanical shock induced failure, adhesive interconnects, and viscoelasticity. Useful program files and macros are also included. - Discusses how the reliability of packaging components is a prime concern to electronics manufacturers - Presents a thorough review of this important field of research, providing users with a practical guide that discusses theoretical aspects, experimental results, and modeling techniques - Includes program files and macros for additional study

Download or read book Solder Joint Reliability Assessment written by Mohd N. Tamin and published by Springer Science & Business. This book was released on 2014-04-26 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic approach in performing reliability assessment of solder joints using Finite Element (FE) simulation. Essential requirements for FE modelling of an electronic package or a single reflowed solder joint subjected to reliability test conditions are elaborated. These cover assumptions considered for a simplified physical model, FE model geometry development, constitutive models for solder joints and aspects of FE model validation. Fundamentals of the mechanics of solder material are adequately reviewed in relation to FE formulations. Concept of damage is introduced along with deliberation of cohesive zone model and continuum damage model for simulation of solder/IMC interface and bulk solder joint failure, respectively. Applications of the deliberated methodology to selected problems in assessing reliability of solder joints are demonstrated. These industry-defined research-based problems include solder reflow cooling, temperature cycling and mechanical fatigue of a BGA package, JEDEC board-level drop test and mechanisms of solder joint fatigue. Emphasis is placed on accurate quantitative assessment of solder joint reliability through basic understanding of the mechanics of materials as interpreted from results of FE simulations. The FE simulation methodology is readily applicable to numerous other problems in mechanics of materials and structures.

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fan Out Wafer Level Packaging written by John H. Lau and published by Springer. This book was released on 2018-04-05 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive guide to fan-out wafer-level packaging (FOWLP) technology compares FOWLP with flip chip and fan-in wafer-level packaging. It presents the current knowledge on these key enabling technologies for FOWLP, and discusses several packaging technologies for future trends. The Taiwan Semiconductor Manufacturing Company (TSMC) employed their InFO (integrated fan-out) technology in A10, the application processor for Apple’s iPhone, in 2016, generating great excitement about FOWLP technology throughout the semiconductor packaging community. For many practicing engineers and managers, as well as scientists and researchers, essential details of FOWLP – such as the temporary bonding and de-bonding of the carrier on a reconstituted wafer/panel, epoxy molding compound (EMC) dispensing, compression molding, Cu revealing, RDL fabrication, solder ball mounting, etc. – are not well understood. Intended to help readers learn the basics of problem-solving methods and understand the trade-offs inherent in making system-level decisions quickly, this book serves as a valuable reference guide for all those faced with the challenging problems created by the ever-increasing interest in FOWLP, helps to remove roadblocks, and accelerates the design, materials, process, and manufacturing development of key enabling technologies for FOWLP.

Download or read book Solder Joint Reliability Prediction for Multiple Environments written by Andrew E. Perkins and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solder Joint Reliability Prediction for Multiple Environments will provide industry engineers, graduate students and academic researchers, and reliability experts with insights and useful tools for evaluating solder joint reliability of ceramic area array electronic packages under multiple environments. The material presented here is not limited to ceramic area array packages only, it can also be used as a methodology for relating numerical simulations and experimental data into an easy-to-use equation that captures the essential information needed to predict solder joint reliability. Such a methodology is often needed to relate complex information in a simple manner to managers and non-experts in solder joint who work with computer server applications as well as for harsh environments such as those found in the defense, space, and automotive industries.

Download or read book The Electronics Handbook written by Jerry C. Whitaker and published by CRC Press. This book was released on 2018-10-03 with total page 2640 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the ten years since the appearance of the groundbreaking, bestselling first edition of The Electronics Handbook, the field has grown and changed tremendously. With a focus on fundamental theory and practical applications, the first edition guided novice and veteran engineers along the cutting edge in the design, production, installation, operation, and maintenance of electronic devices and systems. Completely updated and expanded to reflect recent advances, this second edition continues the tradition. The Electronics Handbook, Second Edition provides a comprehensive reference to the key concepts, models, and equations necessary to analyze, design, and predict the behavior of complex electrical devices, circuits, instruments, and systems. With 23 sections that encompass the entire electronics field, from classical devices and circuits to emerging technologies and applications, The Electronics Handbook, Second Edition not only covers the engineering aspects, but also includes sections on reliability, safety, and engineering management. The book features an individual table of contents at the beginning of each chapter, which enables engineers from industry, government, and academia to navigate easily to the vital information they need. This is truly the most comprehensive, easy-to-use reference on electronics available.

Download or read book Modeling and Simulation for Microelectronic Packaging Assembly written by Shen Liu and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although there is increasing need for modeling and simulation in the IC package design phase, most assembly processes and various reliability tests are still based on the time consuming "test and try out" method to obtain the best solution. Modeling and simulation can easily ensure virtual Design of Experiments (DoE) to achieve the optimal solution. This has greatly reduced the cost and production time, especially for new product development. Using modeling and simulation will become increasingly necessary for future advances in 3D package development. In this book, Liu and Liu allow people in the area to learn the basic and advanced modeling and simulation skills to help solve problems they encounter. Models and simulates numerous processes in manufacturing, reliability and testing for the first time Provides the skills necessary for virtual prototyping and virtual reliability qualification and testing Demonstrates concurrent engineering and co-design approaches for advanced engineering design of microelectronic products Covers packaging and assembly for typical ICs, optoelectronics, MEMS, 2D/3D SiP, and nano interconnects Appendix and color images available for download from the book's companion website Liu and Liu have optimized the book for practicing engineers, researchers, and post-graduates in microelectronic packaging and interconnection design, assembly manufacturing, electronic reliability/quality, and semiconductor materials. Product managers, application engineers, sales and marketing staff, who need to explain to customers how the assembly manufacturing, reliability and testing will impact their products, will also find this book a critical resource. Appendix and color version of selected figures can be found at www.wiley.com/go/liu/packaging

Download or read book Micro and Opto Electronic Materials and Structures Physics Mechanics Design Reliability Packaging written by Ephraim Suhir and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 1471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides the most comprehensive, up-to-date and easy-to-apply information on the physics, mechanics, reliability and packaging of micro- and opto-electronic materials. It details their assemblies, structures and systems, and each chapter contains a summary of the state-of-the-art in a particular field. The book provides practical recommendations on how to apply current knowledge and technology to design and manufacture. It further describes how to operate a viable, reliable and cost-effective electronic component or photonic device, and how to make such a device into a successful commercial product.