Download or read book Thermal Quadrupoles written by Denis Maillet and published by John Wiley & Sons. This book was released on 2000-11-17 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This superb text describes a novel and powerful method for allowing design engineers to firstly model a linear problem in heat conduction, then build a solution in an explicit form and finally obtain a numerical solution. It constitutes a modelling and calculation tool based on a very efficient and systemic methodological approach. Solving the heat equations through integral transforms does not constitute a new subject. However, finding a solution generally constitutes only one part of the problem. In design problems, an initial thermal design has to be tested through the calculation of the temperature or flux field, followed by an analysis of this field in terms of constraints. A modified design is then proposed, followed by a new thermal field calculation, and so on until the right design is found. The thermal quadrupole method allows this often painful iterative procedure to be removed by allowing only one calculation. The chapters in this book increase in complexity from a rapid presentation of the method for one dimensional transient problems in chapter one, to non uniform boundary conditions or inhomogeneous media in chapter six. In addition, a wide range of corrected problems of contemporary interest are presented mainly in chapters three and six with their numerical implementation in MATLAB (r) language. This book covers the whole scope of linear problems and presents a wide range of concrete issues of contemporary interest such as harmonic excitations of buildings, transfer in composite media, thermal contact resistance and moving material heat transfer. Extensions of this method to coupled transfers in a semi-transparent medium and to mass transfer in porous media are considered respectively in chapters seven and eight. Chapter nine is devoted to practical numerical methods that can be used to inverse the Laplace transform. Written from an engineering perspective, with applications to real engineering problems, this book will be of significant interest not only to researchers, lecturers and graduate students in mechanical engineering (thermodynamics) and process engineers needing to model a heat transfer problem to obtain optimized operating conditions, but also to researchers interested in the simulation or design of experiments where heat transfer play a significant role.
Download or read book Thermal Conductivity 23 written by Kenneth E. Wilkes and published by CRC Press. This book was released on 2021-07-28 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains keynote lectures and 54 technical papers, presented at the 23rd International Thermal Conductivity Conference, on various topics, including techniques, coatings and films, theory, composites, fluids, metals, ceramics, and organics, related to thermal conductivity.
Download or read book Infrared Thermography and Thermal Nondestructive Testing written by Vladimir Vavilov and published by Springer Nature. This book was released on 2020-07-10 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book summarizing the theoretical basics of thermal nondestructive testing (TNDT) by combining elements of heat conduction, infrared thermography, and industrial nondestructive testing. The text contains the physical models of TNDT, heat transfer in defective and sound structures, and thermal properties of materials. Also included are the optimization of TNDT procedures, defect characterization, data processing in TNDT, active and passive TNDT systems, as well as elements of statistical data treatment and decision making. This text contains in-depth descriptions of applications in infrared/thermal testing within aerospace, power production, building, as well as the conservation of artistic monuments The book is intended for the industrial specialists who are involved in technical diagnostics and nondestructive testing. It may also be useful for academic researchers, undergraduate, graduate and PhD university students.
Download or read book Thermal Testing of Integrated Circuits written by J. Altet and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Temperature has been always considered as an appreciable magnitude to detect failures in electric systems. In this book, the authors present the feasibility of considering temperature as an observable for testing purposes, with full coverage of the state of the art.
Download or read book Nanostructured Thin Films written by Maria Benelmekki and published by Elsevier. This book was released on 2019-08-25 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Thin Films: Fundamentals and Applications presents an overview of the synthesis and characterization of thin films and their nanocomposites. Both vapor phase and liquid phase approaches are discussed, along with the methods that are sufficiently attractive for large-scale production. Examples of applications in clean energy, sensors, biomedicine, anticorrosion and surface modification are also included. As the applications of thin films in nanomedicine, cell phones, solar cell-powered devices, and in the protection of structural materials continues to grow, this book presents an important research reference for anyone seeking an informed overview on their structure and applications. Shows how thin films are being used to create more efficient devices in the fields of medicine and energy harvesting Discusses how to alter the design of nanostructured thin films by vapor phase and liquid phase methods Explores how modifying the structure of thin films for specific applications enhances their performance
Download or read book Multiphysics Modelling and Simulation for Systems Design and Monitoring written by Mohamed Haddar and published by Springer. This book was released on 2015-01-03 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the state of the art in the field of multiphysics systems. It consists of accurately reviewed contributions to the MMSSD’2014 conference, which was held from December 17 to 19, 2004 in Hammamet, Tunisia. The different chapters, covering new theories, methods and a number of case studies, provide readers with an up-to-date picture of multiphysics modeling and simulation. They highlight the role played by high-performance computing and newly available software in promoting the study of multiphysics coupling effects, and show how these technologies can be practically implemented to bring about significant improvements in the field of design, control and monitoring of machines. In addition to providing a detailed description of the methods and their applications, the book also identifies new research issues, challenges and opportunities, thus providing researchers and practitioners with both technical information to support their daily work and a new source of inspiration for their future research.
Download or read book Advances in Industrial Heat Transfer written by Alina Adriana Minea and published by CRC Press. This book was released on 2012-10-02 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Industrial Heat Transfer presents the basic principles of industrial heat transfer enhancement. Serving as a reference and guide for future research, this book presents a complete approach, from redesigning equipment to the use of nanofluids in industry. Based on the latest methods of the experiment and their interpretation, this book presents a unified conception of the industrial heat transfer process and procedures which will help decrease global energy consumption. Containing both theoretical and practical results, the book uses text, pictures, graphs, and definitions to illustrate points and highlight concepts.
Download or read book Energy Technology 2023 written by Shafiq Alam and published by Springer Nature. This book was released on 2023-02-07 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clean and sustainable energy is of paramount importance for industrial activities, economic development, environment, and public welfare. Aiming to reach NetZero, researchers in both academia and industry as well as policymakers are now putting tremendous efforts into the generation, storage, and applications of clean energy. This collection focuses on new and efficient energy technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery, and emerging novel energy solutions. The volume also covers a broad range of mature and new technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal intensity and pollutants, and reduce carbon dioxide and other greenhouse emissions. Topics include, but are not limited to:• Energy efficient technologies for minerals, metals & materials processing • Clean energy technologies, such as biomass, solar, wind, geothermal, nuclear including SMRs, hydrogen, etc. • Renewable energy resources to reduce the consumption of traditional fossil fuels • Emerging technologies for renewable energy harvesting, conversion, and storage • New concepts or devices for energy generation, conversion, and distribution • Waste heat recovery and other industrial energy efficient technologies • Energy education and energy regulation • Scale-up, stability, and life-cycle analysis of energy technologies and improvement of existing energy-intensive processes • Theory and simulation in energy harvesting, conversion, and storage • Design, operation, and optimization of processes for energy generation (e.g., carbon capture) and conversion of energy carriers • Energy efficiency improvement in process engineering (e.g., for biomass conversion and improved combustion) and electrical engineering (e.g., for power conversion and developing smart grids) • Thermo-electric/electrolysis/photo-electrolysis/fundamentals of PV • Emission control, CO2 capture, and conversion • Carbon sequestration techniques • CO2 and other greenhouse gas reduction metallurgy in ferrous (iron & steel making and forming), non-ferrous and reactive metals including critical rare-earth metals • Sustainability and life cycle assessment of energy systems • Thermodynamics and modelling for sustainable metallurgical processes • 'Smart cool materials' for urban heat island mitigation (such as cool roof infrared reflecting material, and low-temperature heat absorbers for use in air conditioner condensers - like 'endothermic materials') • Methodologies for reducing the cost of energy materials production • Circular economy and developing resource efficiency model for cutting down the transport from remote places • Materials extraction and processing steps for enhancing energy efficiencies in batteries, supercapacitors, and energy efficient cells • Foundational industry (metals-alloys, chemicals, refractories, cement) and energy economy and role of mineral extraction
Download or read book Image and Signal Processing written by Abderrahim Elmoataz and published by Springer Science & Business Media. This book was released on 2010-06-09 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on Image and Signal Processing, ICISP 2010, held in Québec, Canada June 30 - July 2, 2010. The 69 revised full papers were carefully selected from 165 submissions. The papers presented are organized in topical sections on Image Filtering and Coding, Pattern Recognition, Biometry, Signal Processing, Video Coding and Processing, Watermarking and Document Processing, Computer Vision and Biomedical Applications.
Download or read book Recent Advances in Applied Thermal Imaging for Industrial Applications written by Santhi, V. and published by IGI Global. This book was released on 2017-03-16 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the technological boom has resulted in many advancements in modern society, it has also come with a few downfalls; most notably, the failure of new machines and equipment. This has prompted engineers to find suitable diagnostics tools to stop impending malfunctions and make working environments more efficient. Recent Advances in Applied Thermal Imaging for Industrial Applications is a critical reference source that outlines innovative analysis tools to combat systems failure in thermal imaging. Highlighting pertinent topics such as fuzzy c- means technique, human health diagnosis system, multidimensional processing, and optical analysis, this is an ideal resource for all engineers, practitioners, industry leaders, and researchers who are interested in staying up-to-date with advances in thermal imaging which prevents industrial system malfunctions.
Download or read book Thermal Measurements and Inverse Techniques written by Helcio R.B. Orlande and published by CRC Press. This book was released on 2011-05-24 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its uncommon presentation of instructional material regarding mathematical modeling, measurements, and solution of inverse problems, Thermal Measurements and Inverse Techniques is a one-stop reference for those dealing with various aspects of heat transfer. Progress in mathematical modeling of complex industrial and environmental systems has e
Download or read book Thermal Conductivity 22 written by Timothy W. Tong and published by CRC Press. This book was released on 1994-06-08 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Properties Measurement of Materials written by Yves Jannot and published by John Wiley & Sons. This book was released on 2018-01-19 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the main methods used for thermal properties measurement. It aims to be accessible to all those, specialists in heat transfer or not, who need to measure the thermal properties of a material. The objective is to allow them to choose the measurement method the best adapted to the material to be characterized, and to pass on them all the theoretical and practical information allowing implementation with the maximum of precision.
Download or read book Thermal Conductivity 30 written by Daniela S. Gaal and published by DEStech Publications, Inc. This book was released on 2010 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-03 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book Symmetric Galerkin Boundary Element Method written by Alok Sutradhar and published by Springer Science & Business Media. This book was released on 2008-09-26 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symmetric Galerkin Boundary Element Method presents an introduction as well as recent developments of this accurate, powerful, and versatile method. The formulation possesses the attractive feature of producing a symmetric coefficient matrix. In addition, the Galerkin approximation allows standard continuous elements to be used for evaluation of hypersingular integrals. FEATURES • Written in a form suitable for a graduate level textbook as well as a self-learning tutorial in the field. • Covers applications in two-dimensional and three-dimensional problems of potential theory and elasticity. Additional basic topics involve axisymmetry, multi-zone and interface formulations. More advanced topics include fluid flow (wave breaking over a sloping beach), non-homogeneous media, functionally graded materials (FGMs), anisotropic elasticity, error estimation, adaptivity, and fracture mechanics. • Presents integral equations as a basis for the formulation of general symmetric Galerkin boundary element methods and their corresponding numerical implementation. • Designed to convey effective unified procedures for the treatment of singular and hypersingular integrals that naturally arise in the method. Symbolic codes using Maple® for singular-type integrations are provided and discussed in detail. • The user-friendly adaptive computer code BEAN (Boundary Element ANalysis), fully written in Matlab®, is available as a companion to the text. The complete source code, including the graphical user-interface (GUI), can be downloaded from the web site http://www.ghpaulino.com/SGBEM_book. The source code can be used as the basis for building new applications, and should also function as an effective teaching tool. To facilitate the use of BEAN, a video tutorial and a library of practical examples are provided.
Download or read book Heat Transfer Volume 1 written by Yves Jannot and published by John Wiley & Sons. This book was released on 2023-08-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer 1 deals with conduction and convection. It examines the treatment of transient conduction, which is essential for the optimization of processes and systems, as well as for all energy saving problems. The numerous solved exercises allow the reader to grasp the whole range of applications, whether in the field of building, transport, materials or the environment. The appendices contain all the data needed to solve the exercises and will be a valuable source of information. This book is designed for masters and engineering students who are interested in all aspects of heat transfer, but also for engineers who will find the bases needed to understand similar phenomena (conduction-convection-radiation), but which require a different form of reflection and approach.
