Download or read book Thermal Power Plants Volume II written by Robin A. Chaplin and published by EOLSS Publications. This book was released on 2009-11-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been derived from the work of several professors in the nuclear and power industry all of whom have been directly involved with the industry as managers or consultants. The text has been written as educational material and many of the individual chapters have been written as course material for advanced university courses. Also several chapters include material related to plant operation which is prescribed for operator training. Hence it bridges the gap between academic study and practical training. While it is not intended to be comprehensive in all respects it does provide an overview of the topic with sufficient technical depth for a general understanding of power plant technology and a basis for further study in a particular area. When used as a reference in this way each chapter can stand alone and be read independently of the others. Overall it meets the general philosophy of EOLSS in providing a source of knowledge for sustainable development and technological progress for educators and decision makers

Download or read book Thermal Power Plants Volume III written by Robin A. Chaplin and published by EOLSS Publications. This book was released on 2009-11-30 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Pants (Volume III) has been derived from the work of several professors in the nuclear and power industry all of whom have been directly involved with the industry as managers or consultants. The text has been written as educational material and many of the individual chapters have been written as course material for advanced university courses. Also several chapters include material related to plant operation which is prescribed for operator training. Hence it bridges the gap between academic study and practical training. While it is not intended to be comprehensive in all respects it does provide an overview of the topic with sufficient technical depth for a general understanding of power plant technology and a basis for further study in a particular area. When used as a reference in this way each chapter can stand alone and be read independently of the others. Overall it meets the general philosophy of EOLSS in providing a source of knowledge for sustainable development and technological progress for educators and decision makers

Download or read book Thermal Power Plants written by Robin A. Chaplin and published by Encyclopedia of Life Support Systems. This book was released on 2009-12-30 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Plants theme is a component of Encyclopedia of Energy Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. The Theme on Thermal Power Plants presents three main topics which are then expanded into multiple subtopics, each as a chapter. The first topic covers the basic theory including fossil fuel combustion, nuclear fission, thermal fluids and thermodynamic cycles. It then deals with those aspects important to the maintenance of high efficiency and good reliability such as exergy analysis, material characteristics and life extension. The second topic deals with the production of steam. Although this is only the heat receiving part of the steam cycle it is consistent with the general layout of the power plant where the fossil fuel fired boiler or nuclear fission reactor is a separate and distinct part with its own ancilliary equipment. Fossil boilers and nuclear reactors both produce steam but are so different that each is covered separately in its respective series of chapters. The third topic deals with the generation of power utilizing the steam produced in the boiler or reactor. Several chapters cover steam turbine design and operation. Since power must be produced to exactly match the demand, consideration is given to operational constraints and protective devices. Heat rejection in cooling towers is important where no large body of water exists and is addressed in one chapter. Gas turbines are used for peak power generation and, with steam turbines, for combined cycle plants so are dealt with in two chapters. Conversion of mechanical power from the turbine to electrical power for distribution to the consumer is an important aspect and is covered by the last chapter. These three volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers, NGOs and GOs.

Download or read book THERMAL POWER PLANT AND CO GENERATION PLANNING Volume II written by and published by . This book was released on 2010-10-05 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes are a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. These volumes discuss on Large-scale power production which requires the use of heat in a thermodynamic cycle to produce mechanical work, which in turn can generate electrical energy. Substantial quantities of fuel are hence required to sustain the production of heat. Fuel may be combustible, as in the case of fossil fuels such as coal and oil, or fissionable, as in the case of nuclear fuels such as uranium. All fuels produce waste products, which must be discharged, dumped, or stored. Such products range from innocuous water vapor to hazardous nuclear waste. These volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers

Download or read book Thermal Power Plant written by Dipak Sarkar and published by Elsevier. This book was released on 2015-08-20 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Plant: Design and Operation deals with various aspects of a thermal power plant, providing a new dimension to the subject, with focus on operating practices and troubleshooting, as well as technology and design. Its author has a 40-long association with thermal power plants in design as well as field engineering, sharing his experience with professional engineers under various training capacities, such as training programs for graduate engineers and operating personnel. Thermal Power Plant presents practical content on coal-, gas-, oil-, peat- and biomass-fueled thermal power plants, with chapters in steam power plant systems, start up and shut down, and interlock and protection. Its practical approach is ideal for engineering professionals. Focuses exclusively on thermal power, addressing some new frontiers specific to thermal plants Presents both technology and design aspects of thermal power plants, with special treatment on plant operating practices and troubleshooting Features a practical approach ideal for professionals, but can also be used to complement undergraduate and graduate studies

Download or read book Nuclear Systems Volume II written by Neil E. Todreas and published by CRC Press. This book was released on 2021-12-13 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses fundamental ideas for various modeling approaches for the macro- and micro-scale flow conditions in the reactor. Covers specific design considerations, such as natural convection and core reliability. Enables the reader to better understand the importance of safety considerations in thermal engineering and analysis of a modern nuclear plant. Features end-of-chapter problems. Includes a Solutions Manual for adopting instructors.

Download or read book Thermal Power Plants Volume I written by Robin A. Chaplin and published by EOLSS Publications. This book was released on 2009-11-30 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been derived from the work of several professors in the nuclear and power industry all of whom have been directly involved with the industry as managers or consultants. The text has been written as educational material and many of the individual chapters have been written as course material for advanced university courses. Also several chapters include material related to plant operation which is prescribed for operator training. Hence it bridges the gap between academic study and practical training. While it is not intended to be comprehensive in all respects it does provide an overview of the topic with sufficient technical depth for a general understanding of power plant technology and a basis for further study in a particular area. When used as a reference in this way each chapter can stand alone and be read independently of the others. Overall it meets the general philosophy of EOLSS in providing a source of knowledge for sustainable development and technological progress for educators and decision makers.

Download or read book Thermal Power Plants written by Xingrang Liu and published by CRC Press. This book was released on 2016-08-19 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Plants: Modeling, Control, and Efficiency Improvement explains how to solve highly complex industry problems regarding identification, control, and optimization through integrating conventional technologies, such as modern control technology, computational intelligence-based multiobjective identification and optimization, distributed computing, and cloud computing with computational fluid dynamics (CFD) technology. Introducing innovative methods utilized in industrial applications, explored in scientific research, and taught at leading academic universities, this book: Discusses thermal power plant processes and process modeling, energy conservation, performance audits, efficiency improvement modeling, and efficiency optimization supported by high-performance computing integrated with cloud computing Shows how to simulate fossil fuel power plant real-time processes, including boiler, turbine, and generator systems Provides downloadable source codes for use in CORBA C++, MATLAB®, Simulink®, VisSim, Comsol, ANSYS, and ANSYS Fluent modeling software Although the projects in the text focus on industry automation in electrical power engineering, the methods can be applied in other industries, such as concrete and steel production for real-time process identification, control, and optimization.

Download or read book THERMAL DESALINATION PROCESSES Volume II written by and published by . This book was released on 2010-09-19 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Desalination Processes is a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. These volumes discuss matters of great relevance to our world on desalination which is a critically important as clearly the only possible means of producing fresh water from the sea for many parts of the world. The two volumes present state-of-the art subject matter of various aspects of Thermal desalination processes such as: Multi-Stage Flash evaporation (MSF) and Multi Effect Distillation (MED) and Mechanical / Thermal Vapor Compression, in addition to the Hybrid Desalination Systems. Chemical Dosing For Desalination; Control Scheme of the Plants; Steady-State Model; Steady-State Simulation; Dynamic Model; Economics and Performance of Desalination Plants. Theses volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers.

Download or read book Power Plant Instrumentation and Control Handbook written by Swapan Basu and published by Academic Press. This book was released on 2014-11-04 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses instrumentation and control in modern fossil fuel power plants, with an emphasis on selecting the most appropriate systems subject to constraints engineers have for their projects. It provides all the plant process and design details, including specification sheets and standards currently followed in the plant. Among the unique features of the book are the inclusion of control loop strategies and BMS/FSSS step by step logic, coverage of analytical instruments and technologies for pollution and energy savings, and coverage of the trends toward filed bus systems and integration of subsystems into one network with the help of embedded controllers and OPC interfaces. The book includes comprehensive listings of operating values and ranges of parameters for temperature, pressure, flow, level, etc of a typical 250/500 MW thermal power plant. Appropriate for project engineers as well as instrumentation/control engineers, the book also includes tables, charts, and figures from real-life projects around the world. Covers systems in use in a wide range of power plants: conventional thermal power plants, combined/cogen plants, supercritical plants, and once through boilers Presents practical design aspects and current trends in instrumentation Discusses why and how to change control strategies when systems are updated/changed Provides instrumentation selection techniques based on operating parameters. Spec sheets are included for each type of instrument Consistent with current professional practice in North America, Europe, and India

Download or read book COMMON FUNDAMENTALS AND UNIT OPERATIONS IN THERMAL DESALINATION SYSTEMS Volume II written by and published by . This book was released on 2010-11-08 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes are part of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The three volumes present state-of-the art subject matter of various aspects of Common Fundamentals and Unit Operations in Thermal Desalination Systems such as: Conventional Water Treatment Technologies; Guidelines for Potable Water Purification; Advanced Treatment Technologies for Recycle - Reuse of Domestic Wastewater; Composition of Desalinated Water; Crystallization; Deep Bed Filtration: Modeling Theory and Practice; Distillation ; Rectification; Flocculation and Flocculation Filtration; Hazardous Waste Treatment Technologies; Microfiltration and Ultrafiltration; Post-Treatment of Distillate and Permeate; Pre-Cleaning Measures: Filtration; Raw Water Pre-Treatment: Sludge Treatment Technologies; Supercritical Extraction; Potential for Industrial Wastewater Reuse; Treatment of Industrial Wastewater by Membrane Bioreactors; Unconventional Sources of Water Supply; Problem of Non-Condensable Gas Release in Evaporators; Entrainment in Evaporators; Mist Eliminators; Chemical Hazards in Seawater Desalination by the Multistage-Flash Evaporation Technique; Concentration of Liquid Foods; Environmental Impact of Seawater Desalination Plants; Environmental Impacts of Intakes and Out Falls; Industrial Ecology, Water Resources, and Desalination; Rural and Urban Water Supply and Sanitation; Sustainable Development, Water Supply and Sanitation Technology These volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers.

Download or read book Numerical Simulation for Next Generation Thermal Power Plants written by Falah Alobaid and published by Springer. This book was released on 2018-03-29 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides highly specialized researchers and practitioners with a major contribution to mathematical models’ developments for energy systems. First, dynamic process simulation models based on mixture flow and two-fluid models are developed for combined-cycle power plants, pulverised coal-fired power plants, concentrated solar power plant and municipal waste incineration. Operation data, obtained from different power stations, are used to investigate the capability of dynamic models to predict the behaviour of real processes and to analyse the influence of modeling assumptions on simulation results. Then, a computational fluid dynamics (CFD) simulation programme, so-called DEMEST, is developed. Here, the fluid-solid, particle-particle and particle-wall interactions are modeled by tracking all individual particles. To this purpose, the deterministic Euler-Lagrange/Discrete Element Method (DEM) is applied and further improved. An emphasis is given to the determination of inter-phase values, such as volumetric void fraction, momentum and heat transfers, using a new procedure known as the offset-method and to the particle-grid method allowing the refinement of the grid resolution independently from particle size. Model validation is described in detail. Moreover, thermochemical reaction models for solid fuel combustion are developed based on quasi-single-phase, two-fluid and Euler-Lagrange/MP-PIC models. Measurements obtained from actual power plants are used for validation and comparison of the developed numerical models.

Download or read book Modeling and Simulation of Thermal Power Plants with ThermoSysPro written by Baligh El Hefni and published by Springer. This book was released on 2019-01-24 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the modelling and simulation of thermal power plants, and introduces readers to the equations needed to model a wide range of industrial energy processes. Also featuring a wealth of illustrative, real-world examples, it covers all types of power plants, including nuclear, fossil-fuel, solar and biomass. The book is based on the authors’ expertise and experience in the theory of power plant modelling and simulation, developed over many years of service with EDF. In more than forty examples, they demonstrate the component elements involved in a broad range of energy production systems, with detailed test cases for each chemical, thermodynamic and thermo-hydraulic model. Each of the test cases includes the following information: • component description and parameterization data; • modelling hypotheses and simulation results; • fundamental equations and correlations, with their validity domains; • model validation, and in some cases, experimental validation; and • single-phase flow and two-phase flow modelling equations, which cover all water and steam phases. A practical volume that is intended for a broad readership, from students and researchers, to professional engineers, this book offers the ideal handbook for the modelling and simulation of thermal power plants. It is also a valuable aid in understanding the physical and chemical phenomena that govern the operation of power plants and energy processes.

Download or read book An Introduction to Thermal Power Plant Engineering and Operation written by P.K Das, A.K Das and published by Notion Press. This book was released on 2018-11-08 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to meet the requirements of the fresh engineers on the field to endow them with indispensable information, technical know-how to work in the power plant industries and its associated plants. The book provides a thorough understanding and the operating principles to solve the elementary and the difficult problems faced by the modern young engineers while working in the industries. This book is written on the basis of ‘hands-on’ experience, sound and in-depth knowledge gained by the authors during their experiences faced while working in this field. The problem generally occurs in the power plants during operation and maintenance. It has been explained in a lucid language.

Download or read book Thermal Power Plant Performance Analysis written by Gilberto Francisco Martha de Souza and published by Springer Science & Business Media. This book was released on 2012-01-04 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents reliability-based tools used to define performance of complex systems and introduces the basic concepts of reliability, maintainability and risk analysis aiming at their application as tools for power plant performance improvement.

Download or read book Thermal Power Plant written by Dipak Sarkar and published by Elsevier. This book was released on 2016-08-24 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Plants: Pre-Operational Activities covers practical information that can be used as a handy reference by utility operators and professionals working in new and existing plants, including those that are undergoing refurbishments and those that have been shut for long periods of time. It is fully comprehensive, including chapters on flushing boiler systems, various methods of testing steam generators, and the drying out of generators. This book will be invaluable for anyone working on the startup, commissioning, and operation of thermal power plants. It is also a great companion book to Sarkar’s Thermal Power Plant: Design and Operation. Sarkar has worked with thermal power plants for over 40 years, bringing his experience in design and operations to help new and experienced practicing engineers perform effective pre-operational activities. Consolidates all pre-operational aspects of thermal power plants Explains how to handle equipment safely and work efficiently Provides guidance for new and existing power plants to help reduce outage time and save on budgets

Download or read book Structural Engineering and Geomechanics Volume 1 written by Sashi K. Kunnath and published by EOLSS Publications. This book was released on 2020-06-22 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding of dynamic effects on structures is critical to minimize losses from earthquakes and other hazards. These three books provide an overview of essential topics in structural and geotechnical engineering with an additional focus on related topics in earthquake engineering to enable readers gain such an understanding. One of the ultimate objectives of these books is to provide readers with insights into seismic analysis and design. However, in order to accomplish that objective, background material on structural and geotechnical engineering is necessary. Hence the first two sections of the book provide this background material followed by selected topics in earthquake engineering. The material is organized into three major parts. The first section covers topics in structural engineering. Beginning with fundamental mechanics of materials, the book includes chapters on linear and nonlinear analysis as well as topics on modeling of structures from different perspectives. In addition to traditional design of structural systems, introductions to important concepts in structural reliability and structural stability are discussed. Also covered are subjects of recent interest, viz., blast and impact effects on structures as well as the use of fiber reinforced polymer composites in structural applications. Given the growing interest in urban renewal, an interesting chapter on restoration of historic cities is also included. The second part of the book covers topics in geotechnical engineering, covering both shallow and deep foundations and issues and procedures for geotechnical modeling. The final part of the book focuses on earthquake engineering with emphasis on both structures and foundations. Here again, the material covered includes both traditional seismic design and innovative seismic protection. And more importantly, concepts in modeling for seismic analysis are highlighted.