Download or read book Thermal Cycles of Heat Recovery Power Plants written by Tangellapalli Srinivas and published by Bentham Science Publishers. This book was released on 2021-04-02 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Cycles of Heat Recovery Power Plants presents information about thermal power plant cycles suitable for waste heat recovery (WHR) in modern power plants. The author covers five thermal power cycles: organic Rankine cycle (ORC), organic flash cycle (OFC), Kalina cycle (KC), steam Rankine cycle (SRC) and steam flash cycle (SFC) with the working fluids of R123, R124, R134a, R245fa, R717 and R407C. The handbook helps the reader to understand the latest power plant technologies suitable for utilizing the waste heat generated by thermal industrial processes. Key Features: - Comprehensive modeling, simulation, analysis and optimization of 5 power cycle types with different working fluids - Clear information about the processes and solutions of thermal power cycles to augment the power generation with improved energy conversion. - Simple, reader friendly presentation - bibliographic references after each chapter for further reading This handbook is suitable for engineering students in degree courses and professionals in training programs who require resources on advanced thermal power plant operation and optimal waste heat recovery processes, respectively. It is also a handy reference for energy conversion efficiency in heat recovery power plants. The book is also of interest to any researchers interested in industrial applications of thermodynamic processes.
Download or read book Thermal Power Plant Waste Heat Utilization written by David A. Mandell and published by . This book was released on 1974 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waste Heat Utilization written by and published by . This book was released on 1964 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Factors Affecting Power Plant Waste Heat Utilization written by Tennessee Valley Authority and published by Pergamon. This book was released on 1980 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Power Plant Waste Heat Utilization in Alberta written by Frank Bruce MacKenzie and published by . This book was released on 1979 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waste Heat Recovery in Process Industries written by Hussam Jouhara and published by John Wiley & Sons. This book was released on 2022-05-31 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore modern waste heat recovery technology across a variety of industries In Waste Heat Recovery in Process Industries, esteemed thermal engineer Hussam Jouhara delivers an organized and comprehensive exploration of waste heat recovery systems with a focus on industrial applications in different temperature ranges. The author describes various waste heat recovery systems, like heat exchangers, waste heat boilers, air preheaters, direct electrical conversion devices, and thermal storage. The book also offers discussions of the technologies and applications relevant to different temperature ranges present in industrial settings along with revealing case studies from various industries. Waste Heat Recovery in Process Industries examines a variety of industries, from steel to ceramics, chemicals, and food, and how plants operating in these sectors can use waste heat to improve their energy efficiency, reduce energy costs, and minimize their carbon footprint. The book also offers: A thorough introduction to waste heat recovery systems, including recuperative and regenerative burners, heat exchangers, waste heat boilers, air preheaters, and heat pumps Comprehensive explorations of low temperature applications, below 100°C, including advantages and drawbacks, as well as illustrative case studies Practical discussions of medium temperature applications, between 100°C and 400°C, including case studies In-depth examination of high temperature applications, above 400°C, including several case studies Perfect for chemical, mechanical, process, and power engineers, Waste Heat Recovery in Process Industries is also an ideal resource for professionals working in the chemical, metal processing, pharmaceutical, and food industries.
Download or read book Utilization of Waste Heat from Power Plants written by David Rimberg and published by William Andrew. This book was released on 1974 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organic Rankine Cycles for Waste Heat Recovery written by Silvia Lasala and published by BoD – Books on Demand. This book was released on 2020-05-13 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises five chapters on developed research activities on organic Rankine cycles. The first section aims to provide researchers with proper modelling (Chapter 1) and experimental (Chapter 2) tools to calculate and empirically validate thermophysical properties of ORC working fluids. The second section introduces some theoretical and experimental studies of organic Rankine cycles for waste heat recovery applications: a review of different supercritical ORC (Chapter 3), ORC for waste heat recovery from fossil-fired power plants (Chapter 4), the experimental detailed characterization of a small-scale ORC of 3 kW operating with either pure fluids or mixtures (Chapter 5).
Download or read book Investigating Waste Heat Recovery in a Thermal Power Plant Using Thermoelectric Generators written by Thabiso Sibonelo Khumalo and published by . This book was released on 2020 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organic Rankine Cycle ORC Power Systems written by Ennio Macchi and published by Woodhead Publishing. This book was released on 2016-08-24 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Rankine Cycle (ORC) Power Systems: Technologies and Applications provides a systematic and detailed description of organic Rankine cycle technologies and the way they are increasingly of interest for cost-effective sustainable energy generation. Popular applications include cogeneration from biomass and electricity generation from geothermal reservoirs and concentrating solar power installations, as well as waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes. With hundreds of ORC power systems already in operation and the market growing at a fast pace, this is an active and engaging area of scientific research and technical development. The book is structured in three main parts: (i) Introduction to ORC Power Systems, Design and Optimization, (ii) ORC Plant Components, and (iii) Fields of Application. Provides a thorough introduction to ORC power systems Contains detailed chapters on ORC plant components Includes a section focusing on ORC design and optimization Reviews key applications of ORC technologies, including cogeneration from biomass, electricity generation from geothermal reservoirs and concentrating solar power installations, waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes Various chapters are authored by well-known specialists from Academia and ORC manufacturers
Download or read book Heat Energy Recovery for Industrial Processes and Wastes written by David Borge-Diez and published by Springer Nature. This book was released on 2023-02-13 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides new techniques for recovering exhaust heat from gas turbines, natural gas combined cycle power plants, biomass boilers, and waste heat recovery from compost and wastewater treatment plants The book provides modeling for the study and comparison of combined cycle power plants with a heat recovery boiler of three pressure levels with reheating, inserting a technological improvement of solar hybridization and partial regeneration in the gas turbine. It assesses the environmental impacts and economic sustainability associated with these improvements. In addition, it proposes emissions minimization, with exhaust gas recirculation (EGR), and emissions treatment with a CO2 capture plant (CCP) and combined cycle power plant. Finally, it provides new insights into heat recovery from compost and exhaust gases recovery from wastewater treatment plants.
Download or read book Steam Generators and Waste Heat Boilers written by V. Ganapathy and published by CRC Press. This book was released on 2014-10-10 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporates Worked-Out Real-World Problems Steam Generators and Waste Heat Boilers: For Process and Plant Engineers focuses on the thermal design and performance aspects of steam generators, HRSGs and fire tube, water tube waste heat boilers including air heaters, and condensing economizers. Over 120 real-life problems are fully worked out which will help plant engineers in evaluating new boilers or making modifications to existing boiler components without assistance from boiler suppliers. The book examines recent trends and developments in boiler design and technology and presents novel ideas for improving boiler efficiency and lowering gas pressure drop. It helps plant engineers understand and evaluate the performance of steam generators and waste heat boilers at any load. Learn How to Independently Evaluate the Thermal Performance of Boilers and Their Components This book begins with basic combustion and boiler efficiency calculations. It then moves on to estimation of furnace exit gas temperature (FEGT), furnace duty, view factors, heat flux, and boiler circulation calculations. It also describes trends in large steam generator designs such as multiple-module; elevated drum design types of boilers such as D, O, and A; and forced circulation steam generators. It illustrates various options to improve boiler efficiency and lower operating costs. The author addresses the importance of flue gas analysis, fire tube versus water tube boilers used in chemical plants, and refineries. In addition, he describes cogeneration systems; heat recovery in sulfur plants, hydrogen plants, and cement plants; and the effect of fouling factor on performance. The book also explains HRSG simulation process and illustrates calculations for complete performance evaluation of boilers and their components. Helps plant engineers make independent evaluations of thermal performance of boilers before purchasing them Provides numerous examples on boiler thermal performance calculations that help plant engineers develop programming codes with ease Follows the metric and SI system, and British units are shown in parentheses wherever possible Includes calculation procedures for the basic sizing and performance evaluation of a complete steam generator or waste heat boiler system and their components with appendices outlining simplified procedures for estimation of heat transfer coefficients Steam Generators and Waste Heat Boilers: For Process and Plant Engineers serves as a source book for plant engineers, consultants, and boiler designers.
Download or read book Engineering Economic Potential for Power Plant Waste Heat Utilization written by Robert J. Faucher and published by . This book was released on 1972 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work was undertaken to formulate a quantitative mechanism which would facilitate evaluation of power plant waste heat utilization potential. Heat at usable temperatures is made available by extraction from the turbine. Incremental rates for reductions in electric output and heat rejection are obtained for various amounts and locations of waste heat extraction. The maximum justifiable investment (MJI), for a waste heat system, is calculated using a present worth criterion and at constant thermal input to the turbine cycle. A series of thermal market prices is applied in order to determine the sensitivity of the MJI to potential market values. Results for a typical medium sized plant are summarized. (Author).
Download or read book State of the art Waste Heat Utilization for Agriculture and Aquaculture written by and published by . This book was released on 1978 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art assessment of research, demonstration, and commercial projects that involve the use of power plant condenser cooling water for agricultural and aquacultural purposes was conducted. Information was obtained from published literature, site visits, and communications with knowledgeable individuals. Thermal effluent uses were discussed for controlled environment greenhouses, biological recycling of nutrients from livestock manures, soil heating and irrigation, environmental control for livestock housing, grain drying, food processing, as well as the culture of numerous aquatic organisms. A large number of research and feasibility studies have been conducted, but few commercial enterprises are utilizing thermal effluent. Interfacing problems, environmental and legal restrictions, along with insufficient technology, have not allowed widespread commercial application. Specific research needs were discussed.
Download or read book Thermal Engineering of Nuclear Power Stations written by Charles F. Bowman and published by CRC Press. This book was released on 2020-06-07 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Engineering of Nuclear Power Stations: Balance-of-Plant Systems serves as a ready reference to better analyze common engineering challenges in the areas of turbine cycle analysis, thermodynamics, and heat transfer. The scope of the book is broad and comprehensive, encompassing the mechanical aspects of the entire nuclear station balance of plant from the source of the motive steam to the discharge and/or utilization of waste heat and beyond. Written for engineers in the fields of nuclear plant and thermal engineering, the book examines the daily, practical problems encountered by mechanical design, system, and maintenance engineers. It provides clear examples and solutions drawn from numerous case studies in actual, operating nuclear stations.
Download or read book Advances in Thermal Energy Storage Systems written by Luisa F. Cabeza and published by Elsevier. This book was released on 2014-10-31 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal energy storage (TES) technologies store thermal energy (both heat and cold) for later use as required, rather than at the time of production. They are therefore important counterparts to various intermittent renewable energy generation methods and also provide a way of valorising waste process heat and reducing the energy demand of buildings. This book provides an authoritative overview of this key area. Part one reviews sensible heat storage technologies. Part two covers latent and thermochemical heat storage respectively. The final section addresses applications in heating and energy systems. Reviews sensible heat storage technologies, including the use of water, molten salts, concrete and boreholes Describes latent heat storage systems and thermochemical heat storage Includes information on the monitoring and control of thermal energy storage systems, and considers their applications in residential buildings, power plants and industry
Download or read book Low Temperature Energy Systems with Applications of Renewable Energy written by Andriy Redko and published by Academic Press. This book was released on 2019-10-23 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Temperature Energy Systems with Applications of Renewable Energy investigates a wide variety of low-temperature energy applications in residential, commercial, institutional, and industrial areas. It addresses the basic principles that form the groundwork for more efficient energy conversion processes and includes detailed practical methods for carrying out these critical processes. This work considers new directions in the engineering use of technical thermodynamics and energy, including more in-depth studies of the use of renewable sources, and includes worked numerical examples, review questions, and practice problems to allow readers to test their own comprehension of the material. With detailed explanations, methods, models, and algorithms, Low-Temperature Energy Systems with Applications of Renewable Energy is a valuable reference for engineers and scientists in the field of renewable energy, as well as energy researchers and academics. Features end-of chapter review sections with questions and exercises for practical study and utilization. Presents methods for a great variety of energy applications to improve their energy operations. Applies real-world data to demonstrate the impact of low-temperature energy systems on renewable energy use today.
