Download or read book Battery Management Systems written by H.J. Bergveld and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Battery Management Systems - Design by Modelling describes the design of Battery Management Systems (BMS) with the aid of simulation methods. The basic tasks of BMS are to ensure optimum use of the energy stored in the battery (pack) that powers a portable device and to prevent damage inflicted on the battery (pack). This becomes increasingly important due to the larger power consumption associated with added features to portable devices on the one hand and the demand for longer run times on the other hand. In addition to explaining the general principles of BMS tasks such as charging algorithms and State-of-Charge (SoC) indication methods, the book also covers real-life examples of BMS functionality of practical portable devices such as shavers and cellular phones. Simulations offer the advantage over measurements that less time is needed to gain knowledge of a battery's behaviour in interaction with other parts in a portable device under a wide variety of conditions. This knowledge can be used to improve the design of a BMS, even before a prototype of the portable device has been built. The battery is the central part of a BMS and good simulation models that can be used to improve the BMS design were previously unavailable. Therefore, a large part of the book is devoted to the construction of simulation models for rechargeable batteries. With the aid of several illustrations it is shown that design improvements can indeed be realized with the presented battery models. Examples include an improved charging algorithm that was elaborated in simulations and verified in practice and a new SoC indication system that was developed showing promising results. The contents of Battery Management Systems - Design by Modelling is based on years of research performed at the Philips Research Laboratories. The combination of basic and detailed descriptions of battery behaviour both in chemical and electrical terms makes this book truly multidisciplinary. It can therefore be read both by people with an (electro)chemical and an electrical engineering background.

Download or read book Thermal Modeling of the Lithium written by and published by . This book was released on 1994 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of advanced batteries for electric-vehicle applications has increased steadily since the 1990 zero-emission-vehicle mandate of the California Air Resources Board. Due to their design flexibility and potentially high energy and power densities, lithium/polymer batteries are an emerging technology for electric-vehicle applications. Thermal modeling of lithium/polymer batteries is particularly important because the transport properties of the system depend exponentially on temperature. Two models have been presented for assessment of the thermal behavior of lithium/polymer batteries. The one-cell model predicts the cell potential, the concentration profiles, and the heat-generation rate during discharge. The cell-stack model predicts temperature profiles and heat transfer limitations of the battery. Due to the variation of ionic conductivity and salt diffusion coefficient with temperature, the performance of the lithium/polymer battery is greatly affected by temperature. Because of this variation, it is important to optimize the cell operating temperature and design a thermal management system for the battery. Since the thermal conductivity of the polymer electrolyte is very low, heat is not easily conducted in the direction perpendicular to cell layers. Temperature profiles in the cells are not as significant as expected because heat-generation rates in warmer areas of the cell stack are lower than heat-generation rates in cooler areas of the stack. This nonuniform heat-generation rate flattens the temperature profile. Temperature profiles as calculated by this model are not as steep as those calculated by previous models that assume a uniform heat-generation rate.

Download or read book Modeling and Simulation of Lithium ion Power Battery Thermal Management written by Junqiu Li and published by Springer Nature. This book was released on 2022-05-09 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the thermal management technology of lithium-ion batteries for vehicles. It introduces the charging and discharging temperature characteristics of lithium-ion batteries for vehicles, the method for modeling heat generation of lithium-ion batteries, experimental research and simulation on air-cooled and liquid-cooled heat dissipation of lithium-ion batteries, lithium-ion battery heating method based on PTC and wide-line metal film, self-heating using sinusoidal alternating current. This book is mainly for practitioners in the new energy vehicle industry, and it is suitable for reading and reference by researchers and engineering technicians in related fields such as new energy vehicles, thermal management and batteries. It can also be used as a reference book for undergraduates and graduate students in energy and power, electric vehicles, batteries and other related majors.

Download or read book Control Oriented Thermal Modeling of Lithium Ion Batteries written by Derek Brown (M.S.) and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Lithium ion batteries have been widely used in consumer electronics and are beginning to move to the forefront of the automotive and power grid industries. Lithium ion batteries are desirable in these applications because they are high energy density and high specific energy cells, while remaining inexpensive and lightweight. Safety is a concern in every consumer application; therefore, in order for lithium ion battery use to continue growing, advances in battery management systems are needed. Thermal management of lithium ion batteries is currently a critical issue. Applications are becoming more dependent on active liquid thermal management systems. The development of precise battery active liquid thermal management systems begins with an accurate temperature model applicable to control design. This work is focused on the development of a dynamic active liquid cooled battery cell thermal model through the coupling of a lumped energy balance and a single particle electrochemical heat generation model. A fluid channel is added to the bottom of the cell and an aluminum heat sink is added to the side of the cell. Results demonstrate that fluid temperature has more effect on the cell temperature than fluid mass flow rate. The dynamic model developed in this work has an order of 135 and; therefore, is not applicable to controller design. Linearization about an equilibrium trajectory and model order reduction via the Global Arnoldi Algorithm (GAA) is applied. Results show good agreement between the first order reduced system and the non-linear system"--Abstract, leaf iv

Download or read book Battery Management Systems written by Valer Pop and published by Springer Science & Business Media. This book was released on 2008-05-28 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the field of State-of-Charge (SoC) indication for rechargeable batteries. An overview of the state-of-the-art of SoC indication methods including available market solutions from leading semiconductor companies is provided. All disciplines are covered, from electrical, chemical, mathematical and measurement engineering to understanding battery behavior. This book will therefore is for persons in engineering and involved in battery management.

Download or read book Parameter Identification Methodology for Thermal Modeling of Li ion Batteries written by Yatin Khanna and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major shift in the mobility industry towards electric vehicles requires the development of safer energy storage systems (ESS). Li-ion ESS has been at the forefront of automotive, aerospace, and stationary ESS for power backup applications, albeit it suffers from thermal instability issues, which prompts investigation into the thermal behavior of these systems. Thermal modeling of Li-ion batteries is an essential practice to understand the mechanisms behind heat generation and distribution, and cognizance of the thermal behavior is crucial to developing safer Li-ion batteries and optimal thermal management solutions. However, one of the most significant challenges associated with developing thermal models is parameter identification due to the unique layered construction of a Li-ion cell. The simplest thermal model for a Li-ion battery can require the identification of ten or more unknown parameters. The accuracy of the model depends on the accuracy of the parameter identification process. Thermal models also require electrical models to predict heat generation in the cell, which requires a plethora of unknown parameters to be identified to simulate the electrical behavior of the cell. The overall accuracy of predicted temperature and thermal distribution is dependent on the accuracy of both the electrical and thermal models. The parameter identification for thermal modeling requires extensive experimentation, with its challenges, such as heat propagation to the experimental setup and power cables connecting the cell to the battery cycler. The goal of the research presented in this thesis is to develop an innovative experimental setup, test procedures, and calibration strategy for a lumped-parameter thermal model with the aim of accurately estimating the temperature of the cell and the cell tabs. The research aims at developing a test bench capable of minimizing the heat transfer from the cell to the power cables and the ambient. Two thermal experiments with different boundary conditions are designed that use the test bench for parameter identification and calibration. Finally, the parameters are validated using a standardized duty cycle. An equivalent circuit model is used in the study to estimate the electrical behavior of the cell. The test bench, experiments, and parameter identification, calibration, and validation process developed in the thesis can be used for the thermal characterization of Li-ion cells.

Download or read book Internal Flow Systems written by Donald S. Miller and published by Bhra Fluid Engineering. This book was released on 1978 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lithium Ion Batteries written by Xianxia Yuan and published by CRC Press. This book was released on 2016-04-19 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a group of top scientists and engineers in academic and industrial R&D, Lithium-Ion Batteries: Advanced Materials and Technologies gives a clear picture of the current status of these highly efficient batteries. Leading international specialists from universities, government laboratories, and the lithium-ion battery industry share th

Download or read book Electrochemical thermal Modeling of Lithium ion Batteries written by Parthasarathy Manavala Gomadam and published by . This book was released on 2003 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal Management of Electric Vehicle Battery Systems written by Ibrahim Din¿er and published by John Wiley & Sons. This book was released on 2017-03-20 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Management of Electric Vehicle Battery Systems provides a thorough examination of various conventional and cutting edge electric vehicle (EV) battery thermal management systems (including phase change material) that are currently used in the industry as well as being proposed for future EV batteries. It covers how to select the right thermal management design, configuration and parameters for the users’ battery chemistry, applications and operating conditions, and provides guidance on the setup, instrumentation and operation of their thermal management systems (TMS) in the most efficient and effective manner. This book provides the reader with the necessary information to develop a capable battery TMS that can keep the cells operating within the ideal operating temperature ranges and uniformities, while minimizing the associated energy consumption, cost and environmental impact. The procedures used are explained step-by-step, and generic and widely used parameters are utilized as much as possible to enable the reader to incorporate the conducted analyses to the systems they are working on. Also included are comprehensive thermodynamic modelling and analyses of TMSs as well as databanks of component costs and environmental impacts, which can be useful for providing new ideas on improving vehicle designs. Key features: Discusses traditional and cutting edge technologies as well as research directions Covers thermal management systems and their selection for different vehicles and applications Includes case studies and practical examples from the industry Covers thermodynamic analyses and assessment methods, including those based on energy and exergy, as well as exergoeconomic, exergoenvironmental and enviroeconomic techniques Accompanied by a website hosting codes, models, and economic and environmental databases as well as various related information Thermal Management of Electric Vehicle Battery Systems is a unique book on electric vehicle thermal management systems for researchers and practitioners in industry, and is also a suitable textbook for senior-level undergraduate and graduate courses.

Download or read book APPLIED DESIGN OF EXPERIMENTS AND TAGUCHI METHODS written by K. KRISHNAIAH and published by PHI Learning Pvt. Ltd.. This book was released on 2012-01-18 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of experiments (DOE) is an off-line quality assurance technique used to achieve best performance of products and processes. This book covers the basic ideas, terminology, and the application of techniques necessary to conduct a study using DOE. The text is divided into two parts—Part I (Design of Experiments) and Part II (Taguchi Methods). Part I (Chapters 1–8) begins with a discussion on basics of statistics and fundamentals of experimental designs, and then, it moves on to describe randomized design, Latin square design, Graeco-Latin square design. In addition, it also deals with statistical model for a two-factor and three-factor experiments and analyses 2k factorial, 2k-m fractional factorial design and methodology of surface design. Part II (Chapters 9–16) discusses Taguchi quality loss function, orthogonal design, objective functions in robust design. Besides, the book explains the application of orthogonal arrays, data analysis using response graph method/analysis of variance, methods for multi-level factor designs, factor analysis and genetic algorithm. This book is intended as a text for the undergraduate students of Industrial Engineering and postgraduate students of Mechtronics Engineering, Mechanical Engineering, and Statistics. In addition, the book would also be extremely useful for both academicians and practitioners KEY FEATURES : Includes six case studies of DOE in the context of different industry sector. Provides essential DOE techniques for process improvement. Introduces simple graphical methods for reducing time taken to design and develop products.

Download or read book Design and Analysis of Large Lithium Ion Battery Systems written by Shriram Santhanagopalan and published by Artech House. This book was released on 2014-12-01 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource provides you with an introduction to battery design and test considerations for large-scale automotive, aerospace, and grid applications. It details the logistics of designing a professional, large, Lithium-ion battery pack, primarily for the automotive industry, but also for non-automotive applications. Topics such as thermal management for such high-energy and high-power units are covered extensively, including detailed design examples. Every aspect of battery design and analysis is presented from a hands-on perspective. The authors work extensively with engineers in the field and this book is a direct response to frequently-received queries. With the authors’ unique expertise in areas such as battery thermal evaluation and design, physics-based modeling, and life and reliability assessment and prediction, this book is sure to provide you with essential, practical information on understanding, designing, and building large format Lithium-ion battery management systems.

Download or read book Mathematical Modeling of Lithium Batteries written by Krishnan S. Hariharan and published by Springer. This book was released on 2017-12-28 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique to be the only one completely dedicated for battery modeling for all components of battery management system (BMS) applications. The contents of this book compliment the multitude of research publications in this domain by providing coherent fundamentals. An explosive market of Li ion batteries has led to aggressive demand for mathematical models for battery management systems (BMS). Researchers from multi-various backgrounds contribute from their respective background, leading to a lateral growth. Risk of this runaway situation is that researchers tend to use an existing method or algorithm without in depth knowledge of the cohesive fundamentals—often misinterpreting the outcome. It is worthy to note that the guiding principles are similar and the lack of clarity impedes a significant advancement. A repeat or even a synopsis of all the applications of battery modeling albeit redundant, would hence be a mammoth task, and cannot be done in a single offering. The authors believe that a pivotal contribution can be made by explaining the fundamentals in a coherent manner. Such an offering would enable researchers from multiple domains appreciate the bedrock principles and forward the frontier. Battery is an electrochemical system, and any level of understanding cannot ellipse this premise. The common thread that needs to run across—from detailed electrochemical models to algorithms used for real time estimation on a microchip—is that it be physics based. Build on this theme, this book has three parts. Each part starts with developing a framework—often invoking basic principles of thermodynamics or transport phenomena—and ends with certain verified real time applications. The first part deals with electrochemical modeling and the second with model order reduction. Objective of a BMS is estimation of state and health, and the third part is dedicated for that. Rules for state observers are derived from a generic Bayesian framework, and health estimation is pursued using machine learning (ML) tools. A distinct component of this book is thorough derivations of the learning rules for the novel ML algorithms. Given the large-scale application of ML in various domains, this segment can be relevant to researchers outside BMS domain as well. The authors hope this offering would satisfy a practicing engineer with a basic perspective, and a budding researcher with essential tools on a comprehensive understanding of BMS models.

Download or read book Reduced order Coupled Electrochemical thermal Modeling of Lithium ion Battery Cells written by Matthew A. Aldrich and published by . This book was released on 2015 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The focus of this thesis is to introduce a reduced-order linear model to accurately account for the temperature of the cell"--Leaf iv.

Download or read book Fuel Cells I written by Günther G. Scherer and published by Springer Science & Business Media. This book was released on 2008-09-11 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: See table of contents

Download or read book Electrochemical thermal Modeling of Lithium ion Batteries written by Mehrdad Mastali Majdabadi Kohneh and published by . This book was released on 2016 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporating lithium-ion (Li-ion) batteries as an energy storage system in electric devices including electric vehicles brings about new challenges. In fact, the design of Li-ion batteries has to be optimized depending on each application specifications to improve the performance and safety of battery operation under each application and at the same time prevent the batteries from quick degradation. As a result, accurate models capable of predicting the behavior of Li-ion batteries under various operating conditions are necessary. Therefore, the main objective of this research is to develop a battery model that includes thermal heating and is suitable for large-sized prismatic cells used in electric vehicles. This works starts with developing a dual-extended Kalman filter based on an equivalent circuit model for the battery. The dual-extended Kalman filter simultaneously estimates the dynamic internal resistance and state of the charge of the battery. However, the estimated parameters are only the fitted values to the experimental data and may be non-physical. In addition, this filter is only valid for the operating conditions that it is validated against via experimental data. To overcome these issues, physics-based electrochemical models for Li-ion batteries are subsequently considered. One drawback of physics-based models is their high computational cost. In this work, two simplified one-dimensional physics-based models capable of predicting the output voltage of coin cells with less than 2.5% maximum error compared to the full-order model are developed. These models reduce the simulation computational time more than one order of magnitude. In addition to computational time, the accuracy of the physico-chemical model parameter estimates is a concern for physics-based models. Therefore, commercial LiFePO4 (LFP) and graphite electrodes are precisely modelled and characterized by fitting experimental data at different charge/discharge rates (C/5 to 5C). The temperature dependency of the kinetic and transport properties of LFP and graphite electrodes is also estimated by fitting experimental data at various temperatures (10 °C, 23 °C, 35 °C, and 45 °C). Since the spatial current and temperature variations in the large-sized prismatic cells are significant, one-dimensional models cannot be used for the modeling of these prismatic cells. In this work, a resistor network methodology is utilized to combine the one-dimensional models into a three-dimensional multi-layer model. The developed model is verified by comparing the simulated temperatures at the surface of the prismatic cell (consist of LFP as the positive and graphite as the negative electrode) to experimental data at different charge/discharge rates (1C, 2C, 3C, and 5C). Using the developed model the effect of tab size and location, and the current collector thickness, on the electrochemical characteristics of large-sized batteries is evaluated. It is shown that transferring tabs from the edges and the same side (common commercial design) to the center and opposite sides of the cell, and extending them as much as possible in width, lowers the non-uniformity variation in electrochemical current generation.

Download or read book Three Dimensional Thermal Modeling of Lithium ion Battery Pack for Electric Vehicles Thermal Management written by Boyang Liu and published by . This book was released on 2014 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: