Download or read book Thermal Methods of Polymer Analysis written by T.R Crompton and published by Smithers Rapra. This book was released on 2013-01-29 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the various thermal methods used for the characterisation of polymer properties and composition. All these methods study the properties of polymers as they change with temperature. The methods discussed in this book are: differential photocalorimetry, differential scanning calorimetry, dielectric thermal analysis, differential thermal analysis, dynamic mechanical analysis, evolved gas analysis, gas chromatography, gas chromatography combined with mass spectrometry, mass spectrometry, microthermal analysis, thermal volatilisation, thermogravimetric analysis and thermomechanical analysis. Each technique is discussed in detail and examples of the use of each technique are also given. Each chapter has an extensive list of references so that the reader can follow up topics of interest. This book will be a useful reference for those who already use any of these thermal methods but will also be of interest to undergraduates and those who are just starting to use these techniques.
Download or read book Thermal Analysis of Polymeric Materials written by Bernhard Wunderlich and published by Springer Science & Business Media. This book was released on 2005-04-04 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of Contents Table of Contents 1 Atoms, small, and large molecules 2 Basics of thermal analysis 3 Dynamics of chemical and phase changes 4 Thermal analysis tools 5 Structure and properties of materials 6 Single component materials 7 Multiple component materials App. A.1 Table of thermal properties of linear macromolecules and related small molecules - the ATHAS data bank App. A.2 Radiation scattering App. A.3 Derivation of the Rayleigh ratio App. A.4 Neural network predictions App. A.5 Legendre transformations, Maxwell relations, linking of entropy and probability, and derivation of (dS/dT) App. A.6 Boltzmann distribution, harmonic vibration, complex numbers, and normal modes App. A.7 Summary of the basic kinetics of chemical reactions App. A.8 The ITS 1990 and the Krypton-86 length standard App. A.9 Development of classical DTA to DSC App. A.10 Examples of DTA and DSC under extreme conditions App. A.11 Description of an online correction of the heat-flow rate App. A.12 Derivation of the heat-flow equations App. A.13 Description of sawtooth-modulation response App. A.14 An introduction to group theory, definitions of configurations and conformations, and a summary of rational and irrational numbers App. A.15 Summary of birefringence and polarizing microscopy App. A.16 Summary of X-ray diffraction and interference effects App. A.17 Optical analog of electron double diffraction to produce Moire patterns.
Download or read book Thermal Analysis of Polymers written by Joseph D. Menczel and published by John Wiley & Sons. This book was released on 2014-07-09 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a solid introduction to thermal analysis, methods, instrumentation, calibration, and application along with the necessary theoretical background. Useful to chemists, physicists, materials scientists, and engineers who are new to thermal analysis techniques, and to existing users of thermal analysis who wish expand their experience to new techniques and applications Topics covered include Differential Scanning Calorimetry and Differential Thermal Analysis (DSC/DTA), Thermogravimetry, Thermomechanical Analysis and Dilatometry, Dynamic Mechanical Analysis, Micro-Thermal Analysis, Hot Stage Microscopy, and Instrumentation. Written by experts in the various areas of thermal analysis Relevant and detailed experiments and examples follow each chapter.
Download or read book Thermal Analysis of Polymers written by M. P. Sepe and published by iSmithers Rapra Publishing. This book was released on 1997 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The techniques which are particularly relevant to polymer characterisation are evaluated in this new report. For each technique the author describes the method of operation and the output obtained, and then considers its application to polymer characterisation. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Polymer Characterization by Thermal Methods of Analysis written by Jen Chiu and published by . This book was released on 1974 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Methods in Polymer Analysis written by Shalaby W. Shalaby and published by Lawrence Erlbaum Associates. This book was released on 1978 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Characterization of Polymeric Materials written by Edith A. Turi and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Characterization by Thermal Methods of Analysis written by Jen Chiu and published by . This book was released on 1974 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Thermal Analysis and Calorimetry written by and published by Elsevier. This book was released on 2018-03-12 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermal Analysis and Calorimetry: Recent Advances, Techniques and Applications, Volume Six, Second Edition, presents the latest in a series that has been well received by the thermal analysis and calorimetry community. This volume covers recent advances in techniques and applications that complement the earlier volumes. There has been tremendous progress in the field in recent years, and this book puts together the most high-impact topics selected for their popularity by new editors Sergey Vyazovkin, Nobuyoshi Koga and Christoph Schick—all editors of Thermochimica Acta. Among the important new techniques covered are biomass conversion; sustainable polymers; polymer nanocompsoties; nonmetallic glasses; phase change materials; propellants and explosives; applications to pharmaceuticals; processes in ceramics, metals, and alloys; ionic liquids; fast-scanning calorimetry, and more. Features 19 all-new chapters to bring readers up to date on the current status of the field Provides a broad overview of recent progress in the most popular techniques and applications Includes chapters authored by a recognized leader in each field and compiled by a new team of editors, each with at least 20 years of experience in the field of thermal analysis and calorimetry Enables applications across a wide range of modern materials, including polymers, metals, alloys, ceramics, energetics and pharmaceutics Overviews the current status of the field and summarizes recent progress in the most popular techniques and applications
Download or read book Polymer characterization by thermal methods of analysis written by Jen Chiu and published by . This book was released on 1974 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Methods of Analysis written by P.J. Haines and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The wide range of applications of thermal methods of analysis in measuring physical properties, studying chemical reactions and determining the thermal behaviour of samples is of interest to academics and to industry. These applications prompted the writing of this book, in the hope that the descriptions, explanations and examples given would be of help to the analyst and would stimulate the investigation of other thermal techniques. Thermal studies are a fascinating means of examining the samples and the problems brought to us by colleagues, students and clients. If time allows, watching crystals change on a hot-stage microscope, or measuring the properties and changes on a DSC or TG or any thermal instrument can be a rewarding activity, besides providing valuable analytical information. This book started from a series of lectures delivered at Kingston University and at meetings of the Thermal Methods Group of the United Kingdom. The collaboration and information supplied to all the contribu tors by colleagues and instrument manufacturers is most gratefully ack nowledged, as are the valuable contributions made at meetings of the International Confederation for Thermal Analysis and Calorimetry (ICT AC) and at the European Symposia on Thermal Analysis and Calorimetry (ESTAC).
Download or read book Analytical Methods for Polymer Characterization written by Rui Yang and published by CRC Press. This book was released on 2018-01-09 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Methods for Polymer Characterization presents a collection of methods for polymer analysis. Topics include chromatographic methods (gas chromatography, inverse gas chromatography, and pyrolysis gas chromatography), mass spectrometry, spectroscopic methods (ultraviolet-visible spectroscopy, infrared spectroscopy, Raman spectroscopy, and nuclear magnetic resonance), thermal analysis (differential scanning calorimetry and thermogravimetry), microscopy methods (scanning electron microscopy, transmission electron microscopy, and atomic force microscopy), and x-ray diffraction. The author also discusses mechanical and dynamic mechanical properties.
Download or read book Thermal Characterization of Polymeric Materials written by Edith Turi and published by Elsevier. This book was released on 2012-12-02 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Characterization of Polymeric Materials is a critical review and a concise evaluation of the application of thermal analysis in polymer science and engineering. This book is divided into nine chapters that specifically tackle the instrumentation, theory, and a wide variety of applications of thermal characterization. The introductory chapters provide an overview of all aspects of thermal analytical methods and apparatus and the theory underlying the basic principles of thermal analysis. These chapters also examine the theories and functions of state for thermometry, dilatometry, thermomechanical analysis, calorimetry, thermogravimetry. These topics are followed by a discussion on single-component and multicomponent systems and their phase transitions, as influenced by concentration, pressure, deformation, molecular weight, and copolymerization. The subsequent chapters explore the influence of important chemical and physical parameters on the glass transition, crystallization, and melting of thermoplastic materials. The discussion then shifts to the theoretical aspects of polymer-polymer compatibility, phase separation, and miscibility in mixed polymer systems. This book further considers the thermal analysis in thermosets, elastomers, and fibers. The concluding chapters present the methods of obtaining information on the relative flammability properties of polymers, for screening fire retardant additives, and for studying the mechanism of flame inhibition. These chapters also look into the thermal analysis of antioxidants, stabilizers, lubricants, plasticizers, impact modifiers, and fire retardants. Polymer scientists and researchers will find this book invaluable.
Download or read book Principles and Applications of Thermal Analysis written by Paul Gabbott and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Analysis techniques are used in a wide range of disciplines, from pharmacy and foods to polymer science, materials and glasses; in fact any field where changes in sample behaviour are observed under controlled heating or controlled cooling conditions. The wide range of measurements possible provide fundamental information on the material properties of the system under test, so thermal analysis has found increasing use both in basic characterisation of materials and in a wide range of applications in research, development and quality control in industry and academia. Principles and Applications of Thermal Analysis is written by manufacturers and experienced users of thermal techniques. It provides the reader with sound practical instruction on how to use the techniques and gives an up to date account of the principle industrial applications. By covering basic thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) including the new approach of Fast Scanning DSC, together with dynamic mechanical analysis (DMA /TMA) methods, then developing the discussion to encompass industrial applications, the book serves as an ideal introduction to the technology for new users. With a strong focus on practical issues and relating the measurements to the physical behaviour of the materials under test, the book will also serve as an important reference for experienced analysts.
Download or read book Modulated Temperature Differential Scanning Calorimetry written by Mike Reading and published by Springer Science & Business Media. This book was released on 2006-10-12 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: MTDSC provides a step-change increase in the power of calorimetry to characterize virtually all polymer systems including curing systems, blends and semicrystalline polymers. It enables hidden transitions to be revealed, miscibility to be accurately assessed, and phases and interfaces in complex blends to be quantified. It also enables crystallinity in complex systems to be measured and provides new insights into melting behaviour. All of this is achieved by a simple modification of conventional DSC. In 1992 a new calorimetric technique was introduced that superimposed a small modulation on top of the conventional linear temperature program typically used in differential scanning calorimetry. This was combined with a method of data analysis that enabled the sample’s response to the linear component of the temperature program to be separated from its response to the periodic component. In this way, for the first time, a signal equivalent to that of conventional DSC was obtained simultaneously with a measure of the sample’s heat capacity from the modulation. The new information this provided sparked a revolution in scanning calorimetry by enabling new insights to be gained into almost all aspects of polymer characteristics. This book provides both a basic and advanced treatment of the theory of the technique followed by a detailed exposition of its application to reacting systems, blends and semicrystalline polymers by the leaders in all of these fields. It is an essential text for anybody interested in calorimetry or polymer characterization, especially if they have found that conventional DSC cannot help them with their problems.
Download or read book Thermal Analysis in Practice written by Matthias Wagner and published by . This book was released on 2017-12 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal analysis comprises a group of techniques used to determine the physical or chemical properties of a substance as it is heated, cooled, or held at constant temperature. It is particularly important for polymer characterization, but also has major application in analysis of pharmaceuticals and foodstuffs. This comprehensive handbook presents practical and theoretical aspects of the key techniques of DSC, TGA, TMA, DMA, and related methods. It also includes separate chapters on the glass transition, polymers, polymorphism, purity determination, and method development. The large number of practical examples included should inspire readers toward new ideas for applications in their own fields of work. The chapters are independent of one another and can be read individually in any desired order. Based on years of experience in thermal analysis of users, application specialists, consultants, and course instructors, this book provides practical help to newcomers, inexperienced users, and anyone else interested in the practical aspects of thermal analysis.
Download or read book Characterisation of Polymers by Thermal Analysis written by W.M. Groenewoud and published by Elsevier. This book was released on 2001-05-21 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Analysis (TA) has become an indispensable family of analytical techniques in the polymer research. The increased importance of these techniques can be seen as the result of three more or less parallel developments:• a tempestuous development of TA measuring techniques in combination with a high degree of automation,• the strongly increased understanding of the underlaying theory and,• the increasing knowledge of the relation between the polymers' chemical structure and their physical properties. These areas are still in their developmental stages, especially the third area. The increasing knowledge of the dependence of physical properties on chemical structure just accentuated more and more the need for accurate thermoanalytical measurements, and this knowledge is very important for the first stages of the development of new polymeric systems. Besides, the contribution of TA remains necessary for the technical and commercial development of such a new polymer system. The use of the various TA techniques in these processes is described in this book in nine chapters, while chapter ten illustrates the information obtained about different polymers during special case studies. This book illustrates in this way, applications of a wide variety of TA techniques whilst it is written from a materials characterisation rather than from a TA point of view with attention being paid to the chemical structure/physical properties correlations.
