Download or read book Thermal Mechanical Response of a Polymer Matrix Composite at Cryogenic Temperatures written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-11 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order for polymeric-matrix composites to be considered for use as structural materials in the next generation of space transportation systems, the mechanical behavior of these materials at cryogenic temperatures must be investigated. This paper presents experimental data on the residual mechanical properties of a carbon-fiber polymeric composite, IM7/PETI-5, both before and after aging. Both tension and compression modulus and strength were measured at room temperature, -196C, and -269 C on five different laminate configurations. One set of specimens was aged isothermally for 576 hours at -184 C in an unconstrained state. Another set of corresponding specimens was aged under constant uniaxial strain for 576 hours at -184 C. Based on the experimental data presented, it is shown that trends in stiffness and strength that result from changes in temperature are not always smooth and consistent. Moreover, it is shown that loading mode and direction are significant for both stiffness and strength, and aging at cryogenic temperature while under load can alter the mechanical properties of pristine, un-aged laminates made of IM7/PETI-5 material.Whitley, Karen S. and Gates, Thomas S.Langley Research CenterTEMPERATURE EFFECTS; POLYMER MATRIX COMPOSITES; CRYOGENIC TEMPERATURE; COMPRESSIVE STRENGTH; TRENDS; STIFFNESS; SPACE TRANSPORTATION SYSTEM; ROOM TEMPERATURE; LOADS (FORCES); CARBON FIBERS

Download or read book Thermal Mechanical Response of a Polymer Matrix Composite at Cryogenic Temperatures written by and published by . This book was released on 2003 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book THERMAL MECHANICAL RESPONSE OF A POLYMER MATRIX COMPOSITE AT CRYOGENIC TEMPERATURES NASA TM 2003 212171 NATIONAL AERONAUTICS AND SPACE written by United States. National Aeronautics and Space Administration and published by . This book was released on 2003* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Environmental Degradation of Industrial Composites written by Celine A Mahieux and published by Elsevier. This book was released on 2005-12-14 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thanks to their low density and tailored properties, polymer matrix composites are attractive candidates for a large number of industrial applications ranging from aerospace to transportation and energy. However, the behaviour of polymer-based materials is strongly affected by a number of environmental factors. Environmental Degradation in Industrial Composites provides vital information on the effects of environmental factors such as temperature, liquid and gas exposure, electrical fields and radiations, and how micro- and micromechanical calculations during design and manufacture must take these effects into account. The book concludes with reviews on standard and specific testing methods for the various environmental factors and their combinations, helping mechanical/materials engineers and specifiers to predict possible changes due to environmental conditions. Each chapter is supplemented by industrial case studies to help in the understanding of degradation of composites in real life situations.This book will help you to...* Understand how environmental factors lead to degradation effects in polymer matrix composite structures* Build these factors into calculations when predicting the part performance and lifetime of structures* Compare real-life situations from case studies with your predicted results* Predict probable composite behaviour with greater accuracyThis book will help you to...* Understand how environmental factors lead to degradation effects in polymer matrix composite structures* Build these factors into calculations when predicting the part performance and lifetime of structures* Compare real-life situations from case studies with your predicted results* Predict probable composite behaviour with greater accuracy

Download or read book Hygrothermal Response of Polymer Matrix Composite Materials written by Donald F. Adams and published by . This book was released on 1979* with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: A two-dimensional, generalized plane strain, finite element analysis of the stress states in the individual fibers and surrounding matrix of a unidirectionally reinforced composite material was developed. The fibers are modeled as elastic but anisotropic; the matrix is modeled as isotropic, but elastoplastic. Thermal and moisture absorption histories as well as temperature - and moisture-dependent material properties are included. A complete finite element computer program, an associated plot package, and extensive numerical results are available. Experimental work was conducted using unreinforced (neat resin), castings of Hercules 3501-6 epoxy matrix, as well as AS/3501-6 graphite/epoxy matrix, and S2/3501-6 glass/epoxy unidirectional composites. Axial and transverse tensile tests as well as torsional shear tests were performed, under various temperatures and moisture conditions. Experimental results and comparisons with micromechanics predictions are summarized, with references given to various conference and journal publications for detailed information. (Author).

Download or read book Long Term Durability of Polymeric Matrix Composites written by Kishore V. Pochiraju and published by Springer Science & Business Media. This book was released on 2011-09-25 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Long-Term Durability of Polymeric Matrix Composites presents a comprehensive knowledge-set of matrix, fiber and interphase behavior under long-term aging conditions, theoretical modeling and experimental methods. This book covers long-term constituent behavior, predictive methodologies, experimental validation and design practice. Readers will also find a discussion of various applications, including aging air craft structures, aging civil infrastructure, in addition to engines and high temperature applications.

Download or read book On the Use of Accelerated Test Methods for Characterization of Advanced Composite Materials written by Thomas S. Gates and published by . This book was released on 2003 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies

Download or read book Thermal and Mechanical Analysis of Polymer Matrix Composite Materials Exposed to a Concentrated Heat Source for a Short Duration written by Charlotte Corlay and published by . This book was released on 2007 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thus, for given boundary conditions of a composite material exposed to a concentrated heat source for a short duration, the degradation of the material can be estimated in terms of mechanical property changes, from the predicted thermal history of the exposed sample.

Download or read book High Temperature Polymer Matrix Composites written by Tito T. Serafini and published by William Andrew. This book was released on 1987 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fire Properties of Polymer Composite Materials written by A. P. Mouritz and published by Springer Science & Business Media. This book was released on 2007-01-30 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first to deal with the important topic of the fire behaviour of fibre reinforced polymer composite materials. The book covers all of the key issues on the behaviour of composites in a fire. Also covered are fire protection materials for composites, fire properties of nanocomposites, fire safety regulations and standards, fire test methods, and health hazards from burning composites.

Download or read book Manufacturing Techniques for Polymer Matrix Composites PMCs written by Suresh G Advani and published by Elsevier. This book was released on 2012-07-18 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer matrix composites are used extensively across a wide range of industries, making the design and development of effective manufacturing processes of great importance. Manufacturing techniques for polymer matrix composites (PMCs) provides an authoritative review of the different technologies employed in the manufacture of this class of composite.Following an introduction to composites and manufacturing processes, part one reviews the manufacturing of short fiber and nanoparticle based polymer matrix composites, with injection and compression molding examined in depth. Thermoplastic processing is the focus of part two. Sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles are investigated. Part three reviews thermoset processing. A survey of resin transfer molding follows, including vacuum-assisted and compression resin transfer molding. The pultrusion process is then considered, before the book concludes with an investigation into autoclave and out-of-autoclave curing processes in polymer matrix composites.With its distinguished editors and international team of expert contributors, Manufacturing techniques for polymer matrix composites (PMCs) is an essential guide for engineers and scientists working in the field of polymer matrix composites. - Provides an authoritative review of the different technologies employed in the manufacture of polymer matrix composites - Reviews the manufacturing of short fiber and nanoparticle-based polymer matrix composites, with injection and compression molding examined in depth - Examines thermoplastic processing, sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles

Download or read book Polymers at Cryogenic Temperatures written by Susheel Kalia and published by Springer Science & Business Media. This book was released on 2013-03-26 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kalia and Fu's novel monograph covers cryogenic treatment, properties and applications of cryo-treated polymer materials. Written by numerous international experts, the twelve chapters in this book offer the reader a comprehensive picture of the latest findings and developments, as well as an outlook on the field. Cryogenic technology has seen remarkable progress in the past few years and especially cryogenic properties of polymers are attracting attention through new breakthroughs in space, superconducting, magnetic and electronic techniques. This book is a valuable resource for researchers, educators, engineers and graduate students in the field and at technical institutions.

Download or read book Cyclic Load Effects on Long Term Behavior of Polymer Matrix Composites written by A. R. Shah and published by . This book was released on 1996 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Properties and Durability of a Composite Material at Cryogenic Temperatures written by Ray Walton Grenoble and published by . This book was released on 2006 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book AIAA Journal written by American Institute of Aeronautics and Astronautics and published by . This book was released on 2004 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Virtual Testing and Predictive Modeling written by Bahram Farahmand and published by Springer Science & Business Media. This book was released on 2009-06-29 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thematerialsusedinmanufacturingtheaerospace,aircraft,automobile,andnuclear parts have inherent aws that may grow under uctuating load environments during the operational phase of the structural hardware. The design philosophy, material selection, analysis approach, testing, quality control, inspection, and manufacturing are key elements that can contribute to failure prevention and assure a trouble-free structure. To have a robust structure, it must be designed to withstand the envir- mental load throughout its service life, even when the structure has pre-existing aws or when a part of the structure has already failed. If the design philosophy of the structure is based on the fail-safe requirements, or multiple load path design, partial failure of a structural component due to crack propagation is localized and safely contained or arrested. For that reason, proper inspection technique must be scheduled for reusable parts to detect the amount and rate of crack growth, and the possible need for repairing or replacement of the part. An example of a fail-sa- designed structure with crack-arrest feature, common to all aircraft structural parts, is the skin-stiffened design con guration. However, in other cases, the design p- losophy has safe-life or single load path feature, where analysts must demonstrate that parts have adequate life during their service operation and the possibility of catastrophic failure is remote. For example, all pressurized vessels that have single load path feature are classi ed as high-risk parts. During their service operation, these tanks may develop cracks, which will grow gradually in a stable manner.