Download or read book Reliability of Organic Compounds in Microelectronics and Optoelectronics written by Willem Dirk van Driel and published by Springer Nature. This book was released on 2022-01-31 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide a comprehensive reference into the critical subject of failure and degradation in organic materials, used in optoelectronics and microelectronics systems and devices. Readers in different industrial sectors, including microelectronics, automotive, lighting, oil/gas, and petrochemical will benefit from this book. Several case studies and examples are discussed, which readers will find useful to assess and mitigate similar failure cases. More importantly, this book presents methodologies and useful approaches in analyzing a failure and in relating a failure to the reliability of materials and systems.

Download or read book Practical Guide to RF MEMS written by Jacopo Iannacci and published by John Wiley & Sons. This book was released on 2013-08-12 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closes the gap between hardcore-theoretical and purely experimental RF-MEMS books. The book covers, from a practical viewpoint, the most critical steps that have to be taken in order to develop novel RF-MEMS device concepts. Prototypical RF-MEMS devices, both including lumped components and complex networks, are presented at the beginning of the book as reference examples, and these are then discussed from different perspectives with regard to design, simulation, packaging, testing, and post-fabrication modeling. Theoretical concepts are introduced when necessary to complement the practical hints given for all RF-MEMS development stages. Provides researchers and engineers with invaluable practical hints on how to develop novel RF-MEMS device concepts Covers all critical steps, dealing with design, simulation, optimization, characterization and fabrication of MEMS for radio-frequency applications Addresses frequently disregarded issues, explicitly treating the hard to predict interplay between the three-dimensional device structure and its electromagnetic functionality Bridges theory and experiment, fundamental concepts are introduced with the application in mind, and simulation results are validated against experimental results Appeals to the practice-oriented R&D reader: design and simulation examples are based on widely known software packages such as ANSYS and the hardware description language Verilog.

Download or read book Microfabrication for Industrial Applications written by Regina Luttge and published by William Andrew. This book was released on 2011-09-14 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfabrication for Industrial Applications focuses on the industrial perspective for micro- and nanofabrication methods including large-scale manufacturing, transfer of concepts from lab to factory, process tolerance, yield, robustness, and cost. It gives a history of miniaturization, micro- and nanofabrication, and surveys industrial fields of application, illustrating fabrication processes of relevant micro and nano devices. Concerning sub-micron feature manufacture, the book explains: the philosophy of micro/ nanofabrication for integrated circuit industry; thin film deposition; (waveguide, plastic, semiconductor) material processing; packaging; interconnects; stress (e.g., thin film residual); economic; and environmental aspects. Micro/nanomechanical sensors and actuators are explained in depth with information on applications, materials (incl. functional polymers), methods, testing, fabrication, integration, reliability, magnetic microstructures, etc. Shows engineers & students how to evaluate the potential value of current and nearfuture manufacturing processes for miniaturized systems in industrial environments Explains the top-down and bottom up approaches to nanotechnology, nanostructures fabricated with beams, nano imprinting methods, nanoparticle manufacturing (and their health aspects), nanofeature analysis, and connecting nano to micro to macro Discusses issues for practical application cases; possibilities of dimension precision; large volume manufacturing of micro- & nanostructures (machines, materials, costs) Explains applications of Microsystems for information technology, e.g.: data recording (camera, microphone), storage (memories, CDs), communication; computing; and displays (beamers, LCD, TFT) Case studies are given for sensors, resonators, probes, transdermal medical systems, micro- pumps & valves, inkjets, DNA-analysis, lab-on-a-chip, & micro-cooling

Download or read book Thermal Modelling of Power Transformers Using Computational Fluid Dynamics written by Saeed Khandan Siar and published by BoD – Books on Demand. This book was released on 2024-09-19 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power transformers have become vital equipment in providing sustainable power networks and minimizing thermal stress is essential for enhancing their lifespan and reliability. This thesis uses Computational Fluid Dynamics (CFD) to analyze the thermal behavior of power transformers. It examines the effects of non-uniform heat loss distributions and analyses both steady-state and transient thermal behavior in natural and forced cooling modes. It is vital to calculate the hot spot factor under various conditions, especially during transient cooling condition. This research addresses how different parameters impact the hot spot factor and temperature distribution at different operating condition, using measurements and CFD simulations to identify the optimal cooling designs.

Download or read book Proceedings of Mechanical Engineering Research Day 2020 written by Mohd Fadzli Bin Abdollah and published by Centre for Advanced Research on Energy. This book was released on 2020-12-01 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This e-book is a compilation of 170 articles presented at the 7th Mechanical Engineering Research Day (MERD'20) - Kampus Teknologi UTeM (virtual), Melaka, Malaysia on 16 December 2020.

Download or read book Convection and Conduction Heat Transfer written by Amimul Ahsan and published by BoD – Books on Demand. This book was released on 2011-10-21 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The convection and conduction heat transfer, thermal conductivity, and phase transformations are significant issues in a design of wide range of industrial processes and devices. This book includes 18 advanced and revised contributions, and it covers mainly (1) heat convection, (2) heat conduction, and (3) heat transfer analysis. The first section introduces mixed convection studies on inclined channels, double diffusive coupling, and on lid driven trapezoidal cavity, forced natural convection through a roof, convection on non-isothermal jet oscillations, unsteady pulsed flow, and hydromagnetic flow with thermal radiation. The second section covers heat conduction in capillary porous bodies and in structures made of functionally graded materials, integral transforms for heat conduction problems, non-linear radiative-conductive heat transfer, thermal conductivity of gas diffusion layers and multi-component natural systems, thermal behavior of the ink, primer and paint, heating in biothermal systems, and RBF finite difference approach in heat conduction. The third section includes heat transfer analysis of reinforced concrete beam, modeling of heat transfer and phase transformations, boundary conditions-surface heat flux and temperature, simulation of phase change materials, and finite element methods of factorial design. The advanced idea and information described here will be fruitful for the readers to find a sustainable solution in an industrialized society.

Download or read book Proceedings of Mechanical Engineering Research Day 2019 written by Mohd Fadzli Bin Abdollah and published by Centre for Advanced Research on Energy. This book was released on 2019-08-05 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This e-book is a compilation of papers presented at the 6th Mechanical Engineering Research Day (MERD'19) - Kampus Teknologi UTeM, Melaka, Malaysia on 31 July 2019.

Download or read book Advanced RF MEMS written by Stepan Lucyszyn and published by Cambridge University Press. This book was released on 2010-08-19 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date guide to the theory and applications of RF MEMS. With detailed information about RF MEMS technology as well as its reliability and applications, this is a comprehensive resource for professionals, researchers, and students alike. • Reviews RF MEMS technologies • Illustrates new techniques that solve long-standing problems associated with reliability and packaging • Provides the information needed to incorporate RF MEMS into commercial products • Describes current and future trends in RF MEMS, providing perspective on industry growth • Ideal for those studying or working in RF and microwave circuits, systems, microfabrication and manufacturing, production management and metrology, and performance evaluation

Download or read book Thermal Mechanical and Multi Physics Simulation Experiments in Microelectronics and Micro Systems 2007 EuroSime 2007 International Conference on written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nano and Microfabrication for Industrial and Biomedical Applications written by Regina Luttge and published by William Andrew. This book was released on 2016-06-12 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano- and Microfabrication for Industrial and Biomedical Applications, Second Edition, focuses on the industrial perspective on micro- and nanofabrication methods, including large-scale manufacturing, the transfer of concepts from lab to factory, process tolerance, yield, robustness, and cost. The book gives a history of miniaturization and micro- and nanofabrication, and surveys industrial fields of application, illustrating fabrication processes of relevant micro and nano devices. In this second edition, a new focus area is nanoengineering as an important driver for the rise of novel applications by integrating bio-nanofabrication into microsystems. In addition, new material covers lithographic mould fabrication for soft-lithography, nanolithography techniques, corner lithography, advances in nanosensing, and the developing field of advanced functional materials. Luttge also explores the view that micro- and nanofabrication will be the key driver for a "tech-revolution" in biology and medical research that includes a new case study that covers the developing organ-on-chip concept. - Presents an interdisciplinary approach that makes micro/nanofabrication accessible equally to engineers and those with a life science background, both in academic settings and commercial R&D - Provides readers with guidelines for assessing the commercial potential of any new technology based on micro/nanofabrication, thus reducing the investment risk - Updated edition presents nanoengineering as an important driver for the rise of novel applications by integrating bio-nanofabrication into microsystems

Download or read book Advanced Transdisciplinary Engineering and Technology written by Azman Ismail and published by Springer Nature. This book was released on 2022-05-31 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports research findings and outcome from various discipline of engineering and technology, focusing on industrial technology operation and sustainable development. The content is the results of research done at the Research and Innovation Section of the Universiti Kuala Lumpur – MITEC as well as several experts from other institutions in Malaysia. The content describes the latest knowledge and development aligned with current trends of industrial technology operation in Malaysia.

Download or read book Lead free Solders written by K. Subramanian and published by John Wiley & Sons. This book was released on 2012-03-06 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a viable alternative to lead-based solders is a major research thrust for the electrical and electronics industries - whilst mechanically compliant lead-based solders have been widely used in the electronic interconnects, the risks to human health and to the environment are too great to allow continued widescale usage. Lead-free Solders: Materials Reliability for Electronics chronicles the search for reliable drop-in lead-free alternatives and covers: Phase diagrams and alloy development Effect of minor alloying additions Composite approaches including nanoscale reinforcements Mechanical issues affecting reliability Reliability under impact loading Thermomechanical fatigue Chemical issues affecting reliability Whisker growth Electromigration Thermomigration Presenting a comprehensive understanding of the current state of lead-free electronic interconnects research, this book approaches the ongoing research from fundamental, applied and manufacturing perspectives to provide a balanced view of the progress made and the requirements which still have to be met.

Download or read book Fundamentals of Lead Free Solder Interconnect Technology written by Tae-Kyu Lee and published by Springer. This book was released on 2014-11-05 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book provides an up-to-date overview of the concepts behind lead-free soldering techniques. Readers will find a description of the physical and mechanical properties of lead-free solders, in addition to lead-free electronics and solder alloys. Additional topics covered include the reliability of lead-free soldering, tin whiskering and electromigration, in addition to emerging technologies and research.

Download or read book Molecular Modeling and Multiscaling Issues for Electronic Material Applications written by Artur Wymyslowski and published by Springer. This book was released on 2014-11-20 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers readers a snapshot of the progression of molecular modeling in the electronics industry and how molecular modeling is currently being used to understand materials to solve relevant issues in this field. The reader is introduced to the evolving role of molecular modeling, especially seen from the perspective of the IEEE community and modeling in electronics. This book also covers the aspects of molecular modeling needed to understand the relationship between structures and mechanical performance of materials. The authors also discuss the transitional topic of multiscale modeling and recent developments on the atomistic scale and current attempts to reach the submicron scale, as well as the role that quantum mechanics can play in performance prediction.

Download or read book Mechanics of Microsystems written by Alberto Corigliano and published by John Wiley & Sons. This book was released on 2017-11-20 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Microsystems Alberto Corigliano, Raffaele Ardito, Claudia Comi, Attilio Frangi, Aldo Ghisi and Stefano Mariani, Politecnico di Milano, Italy A mechanical approach to microsystems, covering fundamental concepts including MEMS design, modelling and reliability Mechanics of Microsystems takes a mechanical approach to microsystems and covers fundamental concepts including MEMS design, modelling and reliability. The book examines the mechanical behaviour of microsystems from a ‘design for reliability’ point of view and includes examples of applications in industry. Mechanics of Microsystems is divided into two main parts. The first part recalls basic knowledge related to the microsystems behaviour and offers an overview on microsystems and fundamental design and modelling tools from a mechanical point of view, together with many practical examples of real microsystems. The second part covers the mechanical characterization of materials at the micro-scale and considers the most important reliability issues (fracture, fatigue, stiction, damping phenomena, etc) which are fundamental to fabricate a real working device. Key features: Provides an overview of MEMS, with special focus on mechanical-based Microsystems and reliability issues. Includes examples of applications in industry. Accompanied by a website hosting supplementary material. The book provides essential reading for researchers and practitioners working with MEMS, as well as graduate students in mechanical, materials and electrical engineering.

Download or read book Stretchable Electronics written by Tricia Carmichael and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-12-16 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stretchable electronics is a dynamic field of research with the potential to revolutionize human health, robotics, cameras, energy storage, and even building construction. Electronics with rubber-like form factors can integrate with irregularly shaped moving substances in a seamless manner; electronic skins for prosthesis is a good example. The field of stretchable electronics has evolved and matured over the past 20 years, training generations of researchers in the development of novel materials and structures to enable robust integration of miniaturized electronic components. This book presents the work and perspective of this next generation of innovators and disruptors who are driving an exciting phase of diversification and growth in the field.

Download or read book Prediction Technologies for Improving Engineering Product Efficiency written by Lev M. Klyatis and published by Springer Nature. This book was released on 2023-01-03 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at readers who need to learn the latest solutions for interconnected simulation, testing, and prediction technologies that improve engineering product efficiency, including reliability, safety, quality, durability, maintainability, life-cycle costing and profit. It provides a detailed analysis of technologies now being used in industries such as electronics, automotive, aircraft, aerospace, off-highway, farm machinery, and others. It includes clear examples, charts, and illustrations. This book provides analyses of the simulation, testing, and prediction approaches and methodologies with descriptive, negative trends in their development. The author discusses why many current methods of simulation, testing, and prediction are not successful and describes novel techniques and tools developed for eliminating these problems. This book is a tool for engineers, managers, researches in industry, teachers, and students. Lev Klyatis, Hab. Dr.-Ing., ScD., PhD, Senior Advisor SoHaR, Inc., has been a professor at Moscow State Agricultural Engineering University, research leader and chairman of State Enterprise TESTMASH, and served on the US Technical Advisory Group for the International Electrotechnical Commission (IEC), the ISO/IEC Join Study Group in Safety Aspects of Risk Assessment, the United Nations European Economical Commission, and US-USSR Trade and Economic Council. He is presently a member of World Quality Council, the Elmer A. Sperry Board of Award, SAE International G-41 Reliability Committee, the Integrated Design and Manufacturing Committee and session chairman of SAE International World Congresses in Detroit since 2012. His vast experience and innovation enable him to create a new direction for the successful prediction of product efficiency during any given time, including accurate simulation of real-world conditions, accelerated reliability and durability testing technology, and reducing recalls. His approach has been verified in various industries, primarily automotive, farm machinery, aerospace, and aircraft industries. He has shared his new direction working as the seminar instructor and consultant to Ford, DaimlerChrysler, Nissan, Toyota, Jatko Ltd., Thermo King, Black an Dekker, NASA Research Centers, Karl Schenck, and many others. He holds over 30 patents worldwide and is the author of over 300 publications, including 15 books.