Download or read book Elasto Hydrodynamic Lubrication written by D. Dowson and published by Elsevier. This book was released on 2014-07-18 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elasto-Hydrodynamic Lubrication deals with the mechanism of elasto-hydrodynamic lubrication, that is, the lubrication regime in operation over the small areas where machine components are in nominal point or line contact. The lubrication of rigid contacts is discussed, along with the effects of high pressure on the lubricant and bounding solids. The governing equations for the solution of elasto-hydrodynamic problems are presented. Comprised of 13 chapters, this volume begins with an overview of elasto-hydrodynamic lubrication and representation of contacts by cylinders, followed by a discussion on equations relevant to lubrication, including the Reynolds equation. The reader is then introduced to lubrication of rigid cylinders; the importance of film thickness in highly loaded rigid contacts; the elasticity of solids in contact; and the theory of elasto-hydrodynamic lubrication. Subsequent chapters focus on apparatus and measurements of film thickness and film shape; friction and viscosity; and lubrication of gears and roller bearings. This book will be of interest to tribologists.

Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by CRC Press. This book was released on 2004-03-15 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.

Download or read book CRC Handbook of Lubrication written by Robert W. Bruce and published by CRC Press. This book was released on 2010-12-12 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers the general area of lubrication and tribology in all its facets: friction, wear lubricants (liquid, solid, and gas), greases, lubrication principles, applications to various mechanisms, design principles of devices incorporating lubrication, maintenance, lubrication scheduling, and standardized tests; as well as environmental problems and conservation. The information contained in these two volumes will aid in achieving effective lubrication for control of friction and wear, and is another step to improve understanding of the complex factors involved in tribology. Both metric and English units are provided throughout both volumes.

Download or read book Micropolar Fluids written by Grzegorz Lukaszewicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micropolar fluids are fluids with microstructure. They belong to a class of fluids with nonsymmetric stress tensor that we shall call polar fluids, and include, as a special case, the well-established Navier-Stokes model of classical fluids that we shall call ordinary fluids. Physically, micropolar fluids may represent fluids consisting of rigid, randomly oriented (or spherical) particles suspended in a viscous medium, where the deformation of fluid particles is ignored. The model of micropolar fluids introduced in [65] by C. A. Eringen is worth studying as a very well balanced one. First, it is a well-founded and significant generalization of the classical Navier-Stokes model, covering, both in theory and applications, many more phenomena than the classical one. Moreover, it is elegant and not too complicated, in other words, man ageable to both mathematicians who study its theory and physicists and engineers who apply it. The main aim of this book is to present the theory of micropolar fluids, in particular its mathematical theory, to a wide range of readers. The book also presents two applications of micropolar fluids, one in the theory of lubrication and the other in the theory of porous media, as well as several exact solutions of particular problems and a numerical method. We took pains to make the presentation both clear and uniform.

Download or read book Cavitation in Non Newtonian Fluids written by Emil Brujan and published by Springer Science & Business Media. This book was released on 2010-09-28 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Newtonian properties on bubble dynamics and cavitation are fundamentally different from those of Newtonian fluids. The most significant effect arises from the dramatic increase in viscosity of polymer solutions in an extensional flow, such as that generated about a spherical bubble during its growth or collapse phase. In addition, many biological fluids, such as blood, synovial fluid, and saliva, have non-Newtonian properties and can display significant viscoelastic behaviour. This monograph elucidates general aspects of bubble dynamics and cavitation in non-Newtonian fluids and applies them to the fields of biomedicine and bioengineering. In addition it presents many examples from the process industries. The field is strongly interdisciplinary and the numerous disciplines involve have and will continue to overlook and reinvent each others’ work. This book helps researchers to think intuitively about the diverse physics of these systems, to attempt to bridge the various communities involved, and to convey the interest, elegance, and variety of physical phenomena that manifest themselves on the micrometer and microsecond scales.

Download or read book Elastohydrodynamics written by Ramsey Gohar and published by . This book was released on 1988 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonequilibrium Molecular Dynamics written by Billy D. Todd and published by Cambridge University Press. This book was released on 2017-03-10 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This coherent collection of theory, algorithms, and illustrative results presents the field of nonequilibrium molecular dynamics in detail.

Download or read book Tribology for Energy Conservation written by L. Flamand and published by Elsevier. This book was released on 1998-07-23 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 24th Leeds-Lyon Symposium was held in London from 4th-6th September 1997, where it was hosted by the Imperial College of Science, Technology and Medicine.The meeting addressed the topic of "Tribology for Energy Conservation" and attracted a wide range of stimulating papers and speakers. Some 150 delegates from nineteen countries attended and about sixty papers were presented in fifteen sessions. These covered the topics of lubricants, wear, friction reduction, hydrodynamics, elastohydrodynamic lubrication, surface roughness, manufacturing, component life (including condition monitoring), and automotive aspects.

Download or read book Nanolubricants written by Jean Michel Martin and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.

Download or read book Non Newtonian Flow and Applied Rheology written by R. P. Chhabra and published by Elsevier. This book was released on 2011-04-08 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between the theoretical work of the rheologist, and the practical needs of those who have to design and operate the systems in which these materials are handled or processed. It is an established and important reference for senior level mechanical engineers, chemical and process engineers, as well as any engineer or scientist who needs to study or work with these fluids, including pharmaceutical engineers, mineral processing engineers, medical researchers, water and civil engineers. This new edition covers a considerably broader range of topics than its predecessor, including computational fluid dynamics modelling techniques, liquid/solid flows and applications to areas such as food processing, among others. * Written by two of the world's leading experts, this is the only dedicated non-Newtonian flow reference in print. * Since first publication significant advances have been made in almost all areas covered in this book, which are incorporated in the new edition, including developments in CFD and computational techniques, velocity profiles in pipes, liquid/solid flows and applications to food processing, and new heat/mass transfer methods and models. * Covers both basic rheology and the fluid mechanics of NN fluids ? a truly self-contained reference for anyone studying or working with the processing and handling of fluids

Download or read book NBS Special Publication written by and published by . This book was released on 1976 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydrodynamic Lubrication written by J. Frene and published by Elsevier. This book was released on 1997-11-10 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamic Lubrication is the culmination of over 20 years close, collaborative work by the five authors and discusses the practical use of the formalization of low pressure lubrication. The work concentrates on the developments to journal and thrust bearings and includes subjects such as: • the dynamic behaviour of plain and tilting-pads • the thermal aspects • the positive and negative effects of non-cyclindricity and shape defects resulting from manufacturing or operation • the effects of inertia • the appearance of Taylor's vortices and of turbulence and their repercussions. The book contains an abundance of test results objectively compared with theoretical conclusions and a chapter on "technical considerations" to ensure that draft mechanisms will work satisfactorily under the imposed conditions. Hydrodynamic Lubrication is an essential reference book for future and practising engineers who want to put hydrodynamic and hydrostatic journal bearings and thrust bearings into operation under conditions of total safety.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1984 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering Tribology written by Gwidon Stachowiak and published by Butterworth-Heinemann. This book was released on 2013-09-16 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Tribology, Fourth Edition is an established introductory reference focusing on the key concepts and engineering implications of tribology. Taking an interdisciplinary view, the book brings together the relevant knowledge from different fields needed to achieve effective analysis and control of friction and wear. Updated to cover recent advances in tribology, this new edition includes new sections on ionic and mesogenic lubricants, surface texturing, and multiscale characterization of 3D surfaces and coatings. Current trends in nanotribology are discussed, such as those relating to lubricants, coatings and composites, and geotribology is introduced. Suitable as an introductory text, a refresher or an on-the-job reference, Engineering Tribology, 4th Edition is intended for final year undergraduate and postgraduate students in mechanical engineering as well as professional engineers. It is also relevant to those working in materials engineering, applied chemistry, physics and bioengineering. - Offers a comprehensive overview of the mechanisms of wear, lubrication and friction in an accessible manner designed to aid novice engineers, non-specialists and students - Provides a reader-friendly approach to the subject using illustrations to break down the typically complex problems associated with tribology - Includes end-of-chapter problems to test understanding

Download or read book Engineering Tribology written by John Williams and published by Cambridge University Press. This book was released on 2005-01-10 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: An ideal textbook for a first tribology course and a reference for designers and researchers, Engineering Tribology gives the reader interdisciplinary understanding of tribology including materials constraints. Real design problems and solutions, such as those for journal and rolling element bearings, cams and followers, and heavily loaded gear teeth, elucidate concepts and motivate understanding. The hallmark of this work is the integration of qualitative and quantitative material from a wide variety of disciplines including physics, materials science, surface and lubricant chemistry, with traditional engineering approaches. Reviewers have praised the coverage of: both elastic and plastic stresses at surfaces in contact; the mechanisms of friction, wear and surface distress, and wear; thick pressurized fluid films in both hydrostatic and hydrodynamic bearings; elasto-hydrodynamic lubrication; boundary lubrication mechanisms; dry and marginally lubricated bearing design; the design of rolling contacts and bearings.

Download or read book High Pressure Rheology for Quantitative Elastohydrodynamics written by Scott S. Bair and published by Elsevier. This book was released on 2007-03-06 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational elastohydrodynamics, a part of tribology, has existed happily enough for about fifty years without the use of accurate models for the rheology of the liquids used as lubricants. For low molecular weight liquids, such as low viscosity mineral oils, it has been possible to calculate, with precision, the film thickness in a concentrated contact provided that the pressure and temperature are relatively low, even when the pressure variation of viscosity is not accurately modelled in detail. Other successes have been more qualitative in nature, using effective properties which come from the fitting of parameters used in calculations to experimental measurements of the contact behaviour, friction or film thickness. High Pressure Rheology for Quantitative Elastohydrodynamics is intended to provide a sufficiently accurate framework for the rheology of liquids at elevated pressure that it may be possible for computational elastohydrodynamics to discover the relationships between the behaviour of a lubricated concentrated contact and the measurable properties of the liquid lubricant. The required high-pressure measurement techniques are revealed in detail and data are presented for chemically well-defined liquids that may be used as quantitative reference materials.* Presents the property relations required for a quantitative calculation of the tribological behaviour of lubricated concentrated contacts.* Details of high-pressure experimental techniques.* Complete description of the pressure and temperature dependence of viscosity for high pressures.* Some little-known limitations on EHL modelling.