Download or read book Thermal Design of Liquid Cooled Microelectronic Equipment written by Lian-Tuu Yeh and published by . This book was released on 2019 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: "With the demands of increased system functionalities and performance, the system power density of microelectronics equipment is continuously increased at a fast pace. This is especially true for the telecommunications systems because the network traffic in the industry has grown very rapidly every year. For the high power air cooled systems, large high performance fans are becoming a must for the systems in order to provide the necessary air flow rates. Two major concerns about these large fans are the power consumption and the acoustic noise of the fans. In addition, the increase in the system power results in a significant increase in the operation cost of the equipment as well as its host facilities such as the date centers. Liquid cooling can not only resolve the above mentioned issues related to high power air-cooled systems but also enhance its system performance and reliability. For some cases, the system power is too high to be cooled by air thermally. The only solution to such situations is adopting the liquid cooling"--

Download or read book Cooling of Electronic Systems written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic technology is developing rapidly and, with it, the problems associated with the cooling of microelectronic equipment are becoming increasingly complex. So much so that it is necessary for experts in the fluid and thermal sciences to become involved with the cooling problem. Such thoughts as these led to an approach to leading specialists with a request to contribute to the present book. Cooling of Electronic Systems presents the technical progress achieved in the fundamentals of the thermal management of electronic systems and thermal strategies for the design of microelectronic equipment. The book starts with an introduction to the cooling of electronic systems, involving such topics as trends in computer system cooling, the cooling of high performance computers, thermal design of microelectronic components, natural and forced convection cooling, cooling by impinging air and liquid jets, thermal control systems for high speed computers, together with a detailed review of advances in manufacturing and assembly technology. Following this, practical methods for the determination of the parameters required for the thermal analysis of electronic systems and the accurate prediction of temperature in consumer electronics. Cooling of Electronic Systems is currently the most up-to-date book on the thermal management of electronic and microelectronic equipment, and the subject is presented by eminent scientists and experts in the field. Vital reading for all designers of modern, high-speed computers.

Download or read book Thermal Management of Microelectronic Equipment written by Lian-Tuu Yeh and published by American Society of Mechanical Engineers. This book was released on 2002 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an increased demand on system reliability and performance combined with the miniaturization of devices, thermal consideration has become a crucial factor in the design of electronic packaging, from chip to system levels. This new book emphasizes the solving of practical design problems in a wide range of subjects related to various heat transfer technologies. While focusing on understanding the physics involved in the subject area, the authors have provided substantial practical design data and empirical correlations used in the analysis and design of equipment. The book provides the fundamentals along with a step-by-step analysis approach to engineering, making it an indispensable reference volume. The authors present a comprehensive convective heat transfer catalog that includes correlations of heat transfer for various physical configurations and thermal boundary conditions. They also provide property tables of solids and fluids. Lian-Tuu Yeh and Richard Chu are recognized experts in the field of thermal management of electronic systems and have a combined 60 years of experience in the defense and commercial industries.

Download or read book Cooling of Microelectronic and Nanoelectronic Equipment written by Madhusudan Iyengar and published by World Scientific. This book was released on 2014-08-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: To celebrate Professor Avi Bar-Cohen's 65th birthday, this unique volume is a collection of recent advances and emerging research from various luminaries and experts in the field. Cutting-edge technologies and research related to thermal management and thermal packaging of micro- and nanoelectronics are covered, including enhanced heat transfer, heat sinks, liquid cooling, phase change materials, synthetic jets, computational heat transfer, electronics reliability, 3D packaging, thermoelectrics, data centers, and solid state lighting. This book can be used by researchers and practitioners of thermal engineering to gain insight into next generation thermal packaging solutions. It is an excellent reference text for graduate-level courses in heat transfer and electronics packaging. Contents:A Review of Cooling Road Maps for 3D Chip Packages (Dereje Agonafer)Thermal Performance Mapping of Direct Liquid Cooled 3D Chip Stacks (Karl J L Geisler and Avram Bar-Cohen)Dynamic Thermal Management Considering Accurate Temperature-Leakage Interdependency (Bing Shi and Ankur Srivastava)Energy Reduction and Performance Maximization Through Improved Cooling (David Copeland)Optimal Choice of Heat Sinks from an Industrial Point of View (Clemens J M Lasance)Synthetic Jets for Heat Transfer Augmentation in Microelectronics Systems (Mehmet Arik and Enes Tamdogan)Recent Advance in Thermoelectric Devices for Electronics Cooling (Peng Wang)Energy Efficient Solid-State Cooling for Hot Spot Removal (Kazuaki Yazawa, Andrei Fedorov, Yogendra Joshi and Ali Shakouri)An Overview of the Use of Phase Change Materials for the Thermal Management of Transient Portable Electronics: Benefits and Challenges (Amy S Fleischer)Estimation of Cooling Performance of Phase Change Material (PCM) Module (Masaru Ishizuka and Tomoyuki Hatakeyama)Optimization Under Uncertainty for Electronics Cooling Design (Karthik K Bodla, Jayathi Y Murthy and Suresh V Garimella)Hydrophilic CNT-Sintered Copper Composite Wick for Enhanced Cooling (Glen A Powell, Anuradha Bulusu, Justin A Weibel, Sungwon S Kim, Suresh V Garimella and Timothy S Fisher)A Cabinet Level Thermal Test Vehicle to Evaluate Hybrid Double-Sided Cooling Schemes (Qihong Nie and Yogendra Joshi)Energy Efficiency and Reliability Risk Mitigation of Data Centers Through Prognostics and Health Management (Jun Dai, Michael Ohadi and Michael Pecht)Damage Pre-Cursors Based Assessment of Accrued Thermomechanical Damage and Remaining Useful Life in Field Deployed Electronics (Pradeep Lall, Mahendra Harsha, Kai Goebel and Jim Jones)Towards Embedded Cooling — Gen 3 Thermal Packaging Technology (Avram Bar-Cohen) Readership: Researchers, practitioners, and postgraduates in mechanical engineering, nanoelectronics, computer engineering, and electrical & electronic engineering. Keywords:Electronics Cooling;Electronics Packaging;Thermal Management;Thermal Sciences;Electronics Reliability;Thermoelectrics;Computational Heat Transfer;Liquid Cooling

Download or read book Advanced Materials for Thermal Management of Electronic Packaging written by Xingcun Colin Tong and published by Springer Science & Business Media. This book was released on 2011-01-05 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for advanced thermal management materials in electronic packaging has been widely recognized as thermal challenges become barriers to the electronic industry’s ability to provide continued improvements in device and system performance. With increased performance requirements for smaller, more capable, and more efficient electronic power devices, systems ranging from active electronically scanned radar arrays to web servers all require components that can dissipate heat efficiently. This requires that the materials have high capability of dissipating heat and maintaining compatibility with the die and electronic packaging. In response to critical needs, there have been revolutionary advances in thermal management materials and technologies for active and passive cooling that promise integrable and cost-effective thermal management solutions. This book meets the need for a comprehensive approach to advanced thermal management in electronic packaging, with coverage of the fundamentals of heat transfer, component design guidelines, materials selection and assessment, air, liquid, and thermoelectric cooling, characterization techniques and methodology, processing and manufacturing technology, balance between cost and performance, and application niches. The final chapter presents a roadmap and future perspective on developments in advanced thermal management materials for electronic packaging.

Download or read book Thermal Design of Electronic Equipment written by Ralph Remsburg and published by CRC Press. This book was released on 2017-12-19 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a field where change and growth is inevitable, new electronic packaging problems continually arise. Smaller, more powerful devices are prone to overheating, causing intermittent system failures, corrupted signals, lower MTBF, and outright system failure. Since convection cooling is the heat transfer path most engineers take to deal with thermal problems, it is appropriate to gain as much understanding about the underlying mechanisms of fluid motion as possible. Thermal Design of Electronic Equipment is the only book that specifically targets the formulas used by electronic packaging and thermal engineers. It presents heat transfer equations dealing with polyalphaolephin (PAO), silicone oils, perfluorocarbons, and silicate ester-based liquids. Instead of relying on theoretical expressions and text explanations, the author presents empirical formulas and practical techniques that allow you to quickly solve nearly any thermal engineering problem in electronic packaging.

Download or read book Qpedia Thermal Management Electronics Cooling Book Volume 1 written by and published by Advanced Thermal Solutions. This book was released on with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Air Cooling Technology for Electronic Equipment written by Sung Jin Kim and published by CRC Press. This book was released on 2020-07-24 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clear your bookcase of references containing bits and pieces of useful information and replace them with this thorough, single-volume guide to thermal analysis. Air Cooling Technology for Electronic Equipment is a helpful, practical resource that answers questions frequently asked by thermal and packaging engineers grappling with today's demand for increased thermal control in electronics. Superbly organized for quick reference, the book dedicates each chapter to answering fundamental questions, such as: What is the optimal spacing between the printed circuit boards? What is a good estimate of the heat transfer coefficient and the associate pressure drop for forced convection over package arrays? How are heat transfer and fluid flow characteristics in the entrance region different from those in the fully developed region? What is the effect of substrate conduction on convection cooling? The chapters, written by engineers and engineering educators who are experts in electronic cooling, are packed with details and present the latest developments in air cooling techniques and thermal design guidelines. They provide problem-solving analyses that are jargon-free, straightforward, and easy to understand. Air Cooling Technology for Electronic Equipment is a handy source of technical information for anyone who wants to get the most out of air cooling.

Download or read book Cooling of Electronic Equipment written by Allan W. Scott and published by Wiley-Interscience. This book was released on 1974 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Thermal Design of Electronic Equipment written by Ralph Remsburg and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of electronic packaging continues to grow at an amazing rate. To be successful in this field requires analytical skills, a foundation in mechanical engineering, and access to the latest developments in the electronics field. The emphasis for each project that the electronic packaging engineer faces changes from project to project, and from company to company, yet some constants should continue into the foreseeable future. One of these is the emphasis on ther mal design. Although just a few years ago thermal analysis of electronic equipment was an afterthought, it is becoming one of the primary aspects of many packaging jobs. It seems that the days of just adding a bigger fan to reduce the overheat ing problem are almost over. Replacing that thought is the up-front commitment to CFD (Computational Fluid Dynamics) software code, FEA (Finite Element Analysis) software, and the realization that the problem will only get worse. As the electronic circuit size is reduced, speed is increased. As the power of these systems increases and the volume allowed diminishes, heat flux or density (heat per unit area, W/m 2 or Btulh ft2) has spiraled. Much of the improvement in the reliability and packaging density of electronic circuits can be traced to advances in thermal design. While air cooling is still used extensively, advanced heat transfer techniques using exotic synthetic liquids are becoming more prominent, allowing still smaller systems to be manufactured. The appli cation of advanced thermal management techniques requires a background in fluid dynamics.

Download or read book Electronics Cooling written by S. M. Sohel Murshed and published by BoD – Books on Demand. This book was released on 2016-06-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from the renowned researchers and academicians in the field, this book covers key conventional and emerging cooling techniques and coolants for electronics cooling. It includes following thematic topics: - Cooling approaches and coolants - Boiling and phase change-based technologies - Heat pipes-based cooling - Microchannels cooling systems - Heat loop cooling technology - Nanofluids as coolants - Theoretical development for the junction temperature of package chips. This book is intended to be a reference source and guide to researchers, engineers, postgraduate students, and academicians in the fields of thermal management and cooling technologies as well as for people in the electronics and semiconductors industries.

Download or read book Handbook of Applied Thermal Design written by Eric C. Guyer and published by CRC Press. This book was released on 1999-02-01 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gives a foundation to the four principle facets of thermal design: heat transfer analysis, materials performance, heating and cooling technology, and instrumentation and control. The focus is on providing practical thermal design and development guidance across the spectrum of problem analysis, material applications, equipment specification, and sensor and control selection.

Download or read book Heat Transfer in Microelectronic Equipment written by John H. Seely and published by Marcel Dekker. This book was released on 1972 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal Design written by H. S. Lee and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Design: Heat Sinks, Thermoelectrics, Heat Pipes, Compact Heat Exchangers, and Solar Cells, Second Edition, is a significantly updated new edition which now includes a chapter on thermoelectrics It covers thermal devices such as heat sinks, thermoelectric generators and coolers, heat pipes, and heat exchangers as design components in larger systems. These devices are becoming increasingly important and fundamental in thermal design across such diverse areas as microelectronic cooling, green or thermal energy conversion, and thermal control and management in space. The underlying concepts in this book cover the understanding of the physical mechanisms of the thermal devices with the essential formulas and detailed derivations, and also the design of the thermal devices in conjunction with mathematical modeling, graphical optimization, and occasionally computational-fluid-dynamic (CFD) simulation. This new edition includes more examples, problems and tutorials, and a solutions manual is available on a companion website.

Download or read book Advanced Liquid Metal Cooling For Chip Device And System written by Jing Liu and published by World Scientific. This book was released on 2022-04-08 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compendium summarizes the core principles and practical applications of a brand-new advanced chip cooling category — liquid metal cooling. It illustrates the science and art of room temperature liquid metal enabled cooling for chip, device and system. The concise volume features unique scientific and practical merits, and clarified intriguing liquid metal coolant or medium behaviors in making new generation powerful cooling system.With both uniquely important fundamental and practical values, this useful reference text benefits researchers to set up their foundation and then find new ways of making advanced cooling system to fulfil the increasingly urgent needs in modern highly integrated chip industry.

Download or read book Liquid Cooling of Electronic Devices by Single Phase Convection written by Frank P. Incropera and published by Wiley-Interscience. This book was released on 1999-05-31 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Channeling or controlling the heat generated by electronics products is a vital concern of product developers: fail to confront this issue and the chances of product failure escalate. This third book in the series explores yet another method of heat management-the use of liquids to absorb and remove heat away from vital parts of the electronic systems.

Download or read book Thermal Management Handbook For Electronic Assemblies written by Jerry E. Sergent and published by McGraw Hill Professional. This book was released on 1998 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The "hands-on" guide to thermal management! In recent years, heat-sensitive electronic systems have been miniaturized far more than their heat-producing power supplies, leading to major design and reliability challenges — and making thermal management a critical design factor. This timely handbook covers all the practical issues that any packaging engineer must consider with regard to the thermal management of printed circuit boards, hybrid circuits, and multichip modules. Readers will also benefit from the extensive data on material properties and circuit functions, thus enabling more intelligent decisions at the design stage — and preventing thermal-related problems from occurring in the first place.