Download or read book Thermal Conductivity written by Terry M. Tritt and published by Springer Science & Business Media. This book was released on 2005-05-13 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been almost thirty years since the publication of a book that is entirely dedicated to the theory, description, characterization and measurement of the thermal conductivity of solids. The recent discovery of new materials which possess more complex crystal structures and thus more complicated phonon scattering mechanisms have brought innovative challenges to the theory and experimental understanding of these new materials. With the development of new and novel solid materials and new measurement techniques, this book will serve as a current and extensive resource to the next generation researchers in the field of thermal conductivity. This book is a valuable resource for research groups and special topics courses (8-10 students), for 1st or 2nd year graduate level courses in Thermal Properties of Solids, special topics courses in Thermal Conductivity, Superconductors and Magnetic Materials, and to researchers in Thermoelectrics, Thermal Barrier Materials and Solid State Physics.
Download or read book Thermal Properties of Nanofluids written by Taher Armaghani and published by CRC Press. This book was released on 2024-11-13 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Properties of Nanofluids presents emerging prospects for understanding and controlling thermophysical properties at the nanoscale. It covers a comprehensive study of recent progress concerning these properties from the solid state to colloids and, above all, a different look at the effect of temperature on nanofluids’ thermal conducting. Introducing various techniques for measuring solid-state properties, including thermal conductivity, thermal diffusivity, and specific heat capacity, this book presents modeling approaches developed for predicting these properties by molecular dynamic (MD) simulations. It discusses the main factors that affect solid-state properties, such as grain size, grain boundaries, surface interactions, doping, and temperature, and the effects of all these factors. This book will interest industry professionals and academic researchers studying the thermophysical behavior of nanomaterials and heat transfer applications of nanofluids. It will serve graduate engineering students studying advanced fluid mechanics, heat transfer, and nanomaterials.
Download or read book Applied Thermal Measurements At The Nanoscale A Beginner s Guide To Electrothermal Methods written by Zhen Chen and published by World Scientific. This book was released on 2018-07-13 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to serve as a practical guide for novices to design and conduct measurements of thermal properties at the nanoscale using electrothermal techniques. An outgrowth of the authors’ tutorials for new graduate students in their own labs, it includes practical details on measurement design and selection, sensitivity and uncertainty analysis, and pitfalls and verifications. The information is particularly helpful for someone setting up their own experiment for the first time. The book emphasizes the integration of thermal analysis with practical experimental considerations, in order to design an experiment for best sensitivity and to configure the laboratory instruments accordingly. The focus is on the measurements of thermal conductivity, though thermal diffusivity and thermal boundary resistance (thermal contact resistance) are also briefly covered, and many of the principles can be generalized to other challenging thermal measurements.The reader is only expected to have the basic familiarity with electrical instruments typical of a university graduate in science or engineering, and an acquaintance with the elementary laws of heat transfer by conduction, convection, and radiation.
Download or read book Handbook of Measurement in Science and Engineering written by Myer Kutz and published by John Wiley & Sons. This book was released on 2015-12-01 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: A multidisciplinary reference of engineering measurementtools, techniques, and applications—Volume 2 "When you can measure what you are speaking about, and expressit in numbers, you know something about it; but when you cannotmeasure it, when you cannot express it in numbers, your knowledgeis of a meager and unsatisfactory kind; it may be the beginning ofknowledge, but you have scarcely in your thoughts advanced to thestage of science." — Lord Kelvin Measurement falls at the heart of any engineering discipline andjob function. Whether engineers are attempting to staterequirements quantitatively and demonstrate compliance; to trackprogress and predict results; or to analyze costs and benefits,they must use the right tools and techniques to produce meaningful,useful data. The Handbook of Measurement in Science and Engineering isthe most comprehensive, up-to-date reference set on engineeringmeasurements—beyond anything on the market today. Encyclopedicin scope, Volume 2 spans several disciplines—MaterialsProperties and Testing, Instrumentation, and MeasurementStandards—and covers: Viscosity Measurement Corrosion Monitoring Thermal Conductivity of Engineering Materials Optical Methods for the Measurement of ThermalConductivity Properties of Metals and Alloys Electrical Properties of Polymers Testing of Metallic Materials Testing and Instrumental Analysis for Plastics Processing Analytical Tools for Estimation of ParticulateCompositeMaterial Properties Input and Output Characteristics Measurement Standards and Accuracy Tribology Measurements Surface Properties Measurement Plastics Testing Mechanical Properties of Polymers Nondestructive Inspection Ceramics Testing Instrument Statics Signal Processing Bridge Transducers Units and Standards Measurement Uncertainty Data Acquisition and Display Systems Vital for engineers, scientists, and technical managers inindustry and government, Handbook of Measurement in Science andEngineering will also prove ideal for members of majorengineering associations and academics and researchers atuniversities and laboratories.
Download or read book Nano Bio Electronic Photonic and MEMS Packaging written by C.P. Wong and published by Springer Science & Business Media. This book was released on 2009-12-23 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnologies are being applied to the biotechnology area, especially in the area of nano material synthesis. Until recently, there has been little research into how to implement nano/bio materials into the device level. “Nano and Bio Electronics Packaging” discusses how nanofabrication techniques can be used to customize packaging for nano devices with applications to biological and biomedical research and products. Covering such topics as nano bio sensing electronics, bio device packaging, NEMs for Bio Devices and much more.
Download or read book Thermal Behaviour and Applications of Carbon Based Nanomaterials written by Dimitrios V. Papavassiliou and published by Elsevier. This book was released on 2020-04-01 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposites with Carbon-based nanofillers (e.g., carbon nanotubes, graphene sheets and nanoribbons etc.) form a class of extremely promising materials for thermal applications. In addition to exceptional material properties, the thermal conductivity of the carbon-based nanofillers can be higher than any other known material, suggesting the possibility to engineer nanocomposites that are both lightweight and durable, and have unique thermal properties. This potential is hindered by thermal boundary resistance (TBR) to heat transfer at the interface between nanoinclusions and the matrix, and by the difficulty to control the dispersion pattern and the orientation of the nanoinclusions. Thermal Behaviour and Applications of Carbon-Based Nanomaterials: Theory, Methods and Applications explores heat transfer in nanocomposites, discusses techniques predicting and modeling the thermal behavior of carbon nanocomposites at different scales, and methods for engineering applications of nanofluidics and heat transfer. The chapters combine theoretical explanation, experimental methods and computational analysis to show how carbon-based nanomaterials are being used to optimise heat transfer. The applications-focused emphasis of this book makes it a valuable resource for materials scientists and engineers who want to learn more about nanoscale heat transfer.
Download or read book Thermal Energy written by Yatish T. Shah and published by CRC Press. This book was released on 2018-01-12 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book details sources of thermal energy, methods of capture, and applications. It describes the basics of thermal energy, including measuring thermal energy, laws of thermodynamics that govern its use and transformation, modes of thermal energy, conventional processes, devices and materials, and the methods by which it is transferred. It covers 8 sources of thermal energy: combustion, fusion (solar) fission (nuclear), geothermal, microwave, plasma, waste heat, and thermal energy storage. In each case, the methods of production and capture and its uses are described in detail. It also discusses novel processes and devices used to improve transfer and transformation processes.
Download or read book Microelectromechanical Systems written by and published by . This book was released on 2002 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Temperature Physics written by Y. Takano and published by American Institute of Physics. This book was released on 2006-11-22 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents recent cutting-edge developments in low temperature physics, reported at one of the largest international conferences in physics. The subjects covered are superconductivity, magnetism, quantum gases, quantum liquids and solids, electronic properties of solids, low-temperature experimental techniques, cryogenics, and applications.
Download or read book Coatings and Thin Film Technologies written by Jaime Andres Perez Taborda and published by BoD – Books on Demand. This book was released on 2019-01-03 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of coatings and thin-film technologies is rapidly advancing to keep up with new uses for semiconductor, optical, tribological, thermoelectric, solar, security, and smart sensing applications, among others. In this sense, thin-film coatings and structures are increasingly sophisticated with more specific properties, new geometries, large areas, the use of heterogeneous materials and flexible and rigid coating substrates to produce thin-film structures with improved performance and properties in response to new challenges that the industry presents. This book aims to provide the reader with a complete overview of the current state of applications and developments in thin-film technology, discussing applications, health and safety in thin films, and presenting reviews and experimental results of recognized experts in the area of coatings and thin-film technologies.
Download or read book Thermal Conductivity Measurements in Atomically Thin Materials and Devices written by T. Serkan Kasirga and published by Springer Nature. This book was released on 2020-05-19 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the thermal feasibility of using materials with atomically thin layers such as graphene and the transition metal dichalcogenides family in electronics and optoelectronics applications. The focus is on thermal conductivity measurement techniques currently available for the investigation of thermal performance at the material and device level. In addition to providing detailed information on the available techniques, the book introduces readers to novel techniques based on photothermal effects.
Download or read book Proceedings of the 8th International Conference on Sciences of Electronics Technologies of Information and Telecommunications SETIT 18 Vol 2 written by Med Salim Bouhlel and published by Springer. This book was released on 2019-08-01 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book presents an unusually diverse selection of research papers, covering all major topics in the fields of information and communication technologies and related sciences. It provides a wide-angle snapshot of current themes in information and power engineering, pursuing a cross-disciplinary approach to do so. The book gathers revised contributions that were presented at the 2018 International Conference: Sciences of Electronics, Technologies of Information and Telecommunication (SETIT'18), held on 20–22 December 2018 in Hammamet, Tunisia. This eighth installment of the event attracted a wealth of submissions, and the papers presented here were selected by a committee of experts and underwent additional, painstaking revision. Topics covered include: · Information Processing · Human-Machine Interaction · Computer Science · Telecommunications and Networks · Signal Processing · Electronics · Image and Video This broad-scoped approach is becoming increasingly popular in scientific publishing. Its aim is to encourage scholars and professionals to overcome disciplinary barriers, as demanded by current trends in the industry and in the consumer market, which are rapidly leading toward a convergence of data-driven applications, computation, telecommunication, and energy awareness. Given its coverage, the book will benefit graduate students, researchers and practitioners who need to keep up with the latest technological advances.
Download or read book Heat Transfer written by Aziz Belmiloudi and published by BoD – Books on Demand. This book was released on 2011-01-28 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades there has been a prolific increase in research and development in area of heat transfer, heat exchangers and their associated technologies. This book is a collection of current research in the above mentioned areas and discusses experimental, theoretical and calculation approaches and industrial utilizations with modern ideas and methods to study heat transfer for single and multiphase systems. The topics considered include various basic concepts of heat transfer, the fundamental modes of heat transfer (namely conduction, convection and radiation), thermophysical properties, condensation, boiling, freezing, innovative experiments, measurement analysis, theoretical models and simulations, with many real-world problems and important modern applications. The book is divided in four sections : "Heat Transfer in Micro Systems", "Boiling, Freezing and Condensation Heat Transfer", "Heat Transfer and its Assessment", "Heat Transfer Calculations", and each section discusses a wide variety of techniques, methods and applications in accordance with the subjects. The combination of theoretical and experimental investigations with many important practical applications of current interest will make this book of interest to researchers, scientists, engineers and graduate students, who make use of experimental and theoretical investigations, assessment and enhancement techniques in this multidisciplinary field as well as to researchers in mathematical modelling, computer simulations and information sciences, who make use of experimental and theoretical investigations as a means of critical assessment of models and results derived from advanced numerical simulations and improvement of the developed models and numerical methods.
Download or read book The Physics of Semiconductor Devices written by R. K. Sharma and published by Springer. This book was released on 2019-01-31 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates the current knowledge of semiconductor physics and its applications across the scientific community. It is based on a biennial workshop that provides the participating research groups with a stimulating platform for interaction and collaboration with colleagues from the same scientific community. The book discusses the latest developments in the field of III-nitrides; materials & devices, compound semiconductors, VLSI technology, optoelectronics, sensors, photovoltaics, crystal growth, epitaxy and characterization, graphene and other 2D materials and organic semiconductors.
Download or read book Sol Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.
Download or read book Nanowelded Carbon Nanotubes written by Changxin Chen and published by Springer Science & Business Media. This book was released on 2009-08-26 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a novel ultrasonic nanowelding technology of carbon nanotubes (CNTs) to metal electrodes and its application for CNT devices. It will be of interest to graduates, scientists and engineers working on CNTs and related topics.
